Help with xslt xml, "the value specified in the xslt file field is not an xslt file." ???
when trying to attach an XSLT to an XML file I am getting this error message:
"the value specified in the xslt file field is not an xslt file."
this is the first time I am ever doing this and I dont have the faintest clue what might be wrong and how to go about fixing it...
help?
http://www.w3schools.com/xml/xml_xsl.asp
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web-design.blogspot.com/
Similar Messages
-
I am a student. I've been trying to install and use Visual Studio 2013 Professional for three weeks now and I cannot get it to work. I am now two weeks behind in my Visual Basic class. I've installed, uninstalled, ran the repair option...
I've tried everything I know how to do. I just spent 45 minutes on the phone with Microsoft, was transferred four times and finally told I will have to use the forums to find an answer. I'm almost completely out of patience with this.
I got the software through the Dream Spark program as a student. I installed it with the web installer and it appeared to install fine. When I try to create a new project, I get the error: "Error writing the project file. The
specified module could not be found."
When I exit the application, I also get: "The automatically saved settings file 'c:\users\user\documents\visual studio 2013\Settings\CurrentSettings-2015-02-02.vssettings' is not available for write. You can change this file on the 'Import
and Export Settings' Tools Options page."
Please tell me you can help.Hi,
could you please try the points mentioned here:
http://social.msdn.microsoft.com/Forums/en-US/vssetup/thread/0376db8f-4761-4ae5-9af2-98c53216318a#VS_IDE_unexpected_problems to eliminate the possible cause of your issue?
Please update the result in the forum after you try the method above!
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey. -
Need help with Error message "The disk you inserted was not readable by this computer"
I got this message this afternoon "The disk you inserted was not readable by this computer" with the options to either "Ignore" or Eject"
This is in reference to my External Hard Drive "Buffalo" 1TB. I just got my Mac 27inch this week and when i got it i hooked up this hard drive to it, historically used on my old windows machine, but was still FAT32 formatted. I was able to upload all my pics to Aperture and music to iTunes. Was able to surf the data no problem.
This afternoon i noticed that it was no longer visible in the "Finder" and afre rebooting several times, got this message "The disk you inserted was not readable by this computer"
Neither the mac nor the HD was moved since yesterday, early this am when it worked.
Is there an easy fix to this? whats going on.
Some info:
I had used this external storage unit for more then a year.
I sold my PC today so cant test if the hard drive still works on that.
I have the latest 27 inch mac (2.7GHz)
Storage is connected to a power source ( I tried both USB and FireWire, both yield the same message)
Any advice?Have you tried the Repair Disk feature in Disk Utility?
-
Need help with PAGES in the document file will not open
Hi if anyone can help me I woud appreciate it-
I downlaoded awhile back the new software X and eveything was fine till I tried to open some documents (pages) and it will NOT OPEN a window pops up a newer version is available but when I go in there are NO UPDATES and I really do not think I need to buy a newer version do I?
Please HelpWhen you installed the latest version of Pages (and other iWork apps), the older versions were saved in a folder named "iWorks '09" in the Applications folder. You're trying to open a document that was saved in Pages 5 or in Pages for iOS using the older version of Pages. What you probably need to do is remove the Dock icon and drag Pages 5 into the Dock.
-
I had to put my computer by together without migration or time machine I NEED help with order of the files?
Hi, where are these other files exactly?
-
Hi. I have an iPhone 4s. The music doesn't play when I connect it to my car stereo. It used to play previously but stopped playing all of a sudden. My phone is getting charged when I cut it to the USB port. Please help with this. The iOS is 6.1.3.
Hello Priyanks,
I found an article with steps you can take to troubleshoot issues with an iPhone not connecting to your car stereo:
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/TS3581
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Please i need help with switch from the us store to malaysian store how i can switch
Please i need help with switch from the us store to malaysian store how i can switch
Click here and follow the instructions to change the iTunes Store country.
(82303) -
How can I get help with illegal iTunes charges on my credit card for things I did not order. chuck
Same answer as last times you asked the same question:
iTunes adding charges to my credit card fog things I did not order. What can I do about it. Chuck -
Can someone help with a previous post labeled "Writing to a data file with time stamp - Help! "
Can someone possibly help with a previous post labeled "Writing to a data file with time stamp - Help! "
Thankswhats the problem?
Aquaphire
---USING LABVIEW 6.1--- -
Hi,
In one of my dll (VS2010), the process Skipping target "MetaGen" because all output files are up-to-date with respect to the input files.
it is at random. I have checked the time stamps of the dll and metagen.write.1.tlog both having the time stamp on the failed build. But all files in release folder did not have the same time. They are one hour earlier than the dll
and the metagen.write.1.tlog.
On the good build it said the input file is is newer than output file ".\Release\\metagen.write.1.tlog" and allfiles in the release folder have same time stamp.
Any clue to solve this ?
Regards,Hi,
Based on your post, I am not very clear about your issue. I feel your issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Could you please provide us more information so that we resolve your issue better?
What type of project are you working with? C++ MFC project?
How was the
metagen.write.1.tlog file generated in your project?
What error messages did you get?
What is the 'input file'?
If possible, please provide us a sample project to reproduce your issue.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I had to restore my computer. After reinstalling itunes and sincronizing with my ipod, the music files were not organized in itunes as in the ipod: some songs were missing, some albums has no cover? Why is the sincronization not working properly?
See Recover your iTunes library from your iPod or iOS device.
tt2 -
Please help i cannot open the pdf files of cic.gc.ca
please help i cannot open the pdf files of cic.gc.ca
Hi ooovvvaaaiiisss12345.
Are you trying to view the pdf's from the browser are after downloading it and viewing via Reader.
Please let me know the OS and browser you are using.
Are you able to view the pdf's on other websites?
Let me know what errors you get while viewing the pdf's -
Help - just got message "The installed graphics card does not meet the minimum requirements for Aperture"
Please click Profile Update and follow the directions for updating your profile. Your computer may be too old to support Aperture however without knowing anything about your iMac it's impossible to say. Also there is an Aperture forum to use and you can look at Aperture's System Requirements below to see if you have the minimum.
System Requirements
Minimum
One of the following Intel-based Mac computers:
Mac Pro
MacBook Pro
MacBook
MacBook Air
iMac
Mac mini
Operating system:
Mac OS X v10.5.8 or v10.6.2 or later
Memory:
1GB of RAM
2GB of RAM required for Mac Pro
Other requirements:
DVD drive for installation
1GB of disk space for application and documentation
7GB of disk space for Sample Library -
Please help me to find the table for fields where the descriptions are give
please help me to find the table for fields where the descriptions are given below
Customer Support Administrator
first line Support indicatorYou could also try table DD01T. In se 16,put in the description thats needed,you will get to know the respective data elements.
Then you can use DD03L to find the respective table. This would work if the data element is not generic.
Regards,
Anubhav. -
"The property or field has not been initialized" Error, when debbuging app
Hello,
I'm following the instructions of a dev book but I get the following error message when debugging the app.
"The property or field has not been initialized. It has not been requested or the request has not been executed. It may need to be explicitly requested."
The code:
var collListItems;
$(document).ready(function () {
getConfigValues();
function getConfigValues() {
var context = SP.ClientContext.get_current();
var configList = context.get_web().get_lists().getByTitle('Configuration Values');
var camlQuery = new SP.CamlQuery();
collListItems = configList.getItems(camlQuery);
context.load(collListItems);
context.executeQueryAsync(onGetConfigValuesSuccess, onGetConfigValuesFail);
function onGetConfigValuesSuccess() {
var OrgLogoUrl;
var OrgName;
var listItemEnumerator = collListItems.getEnumerator();
while (listItemEnumerator.moveNext()) {
var oListItem = listItemEnumerator.get_current();
var current = oListItem.get_item('Title');
switch (current) {
case 'OrganizationName':
OrgName = oListItem.get_item('Value');
break;
case 'OrganizationLogoUrl':
OrgLogoUrl = oListItem.get_item('Value');
break;
if (OrgName && OrgName.length > 0) {
$('#DeltaPlaceHolderPageTitleInTitleArea').html(OrgName);
$('.ms-siteicon-img').attr('title', OrgName);
if (OrgLogoUrl && OrgLogoUrl.length > 0)
$('.ms-siteicon-img').attr('src', OrgLogoUrl);
else
$('.ms-siteicon-img').attr('src', '../Images/AppLogo.png');
function onGetConfigValuesFail(sender, args) {
alert('Failed to get the Configuration Values. Error:' + args.get_message());
What it have to do is to replace the Title and Site logo, using the "Title" and "Value" fields of the "Configuration Values" list.
My dev environment: SharePoint online, Azure, VS2013 Ultimate (trial)
I've tried to reach the author of the book but it's being 4 days and no response, maybe somebody here can help me.
Thanks in advance.
JimmyJaydeep, I don't get the values, see the HTML code below.
<%@ Page Inherits="Microsoft.SharePoint.WebPartPages.WebPartPage, Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" MasterPageFile="~masterurl/default.master" Language="C#" %>
<%@ Register TagPrefix="SharePoint" Namespace="Microsoft.SharePoint.WebControls" Assembly="Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
<%@ Register TagPrefix="Utilities" Namespace="Microsoft.SharePoint.Utilities" Assembly="Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
<%@ Register TagPrefix="WebPartPages" Namespace="Microsoft.SharePoint.WebPartPages" Assembly="Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
<%-- The markup and script in the following Content element will be placed in the <head> of the page --%>
<asp:Content ContentPlaceHolderID="PlaceHolderAdditionalPageHead" runat="server">
<script type="text/javascript" src="https://ajax.aspnetcdn.com/ajax/jQuery/jquery-1.8.2.min.js"></script>
<script type="text/javascript" src="/_layouts/15/sp.runtime.js"></script>
<script type="text/javascript" src="/_layouts/15/sp.js"></script>
<!-- Add your CSS styles to the following file -->
<link rel="Stylesheet" type="text/css" href="../Content/App.css" />
<!-- Add your JavaScript to the following file -->
<script type="text/javascript" src="../Scripts/App.js"></script>
</asp:Content>
<%-- The markup in the following Content element will be placed in the TitleArea of the page --%>
<asp:Content ContentPlaceHolderID="PlaceHolderPageTitleInTitleArea" runat="server">
KA Online Klas
</asp:Content>
<%-- The markup and script in the following Content element will be placed in the <body> of the page --%>
<asp:Content ContentPlaceHolderID="PlaceHolderMain" runat="server">
<div id="menu">
<ul>
<li><a href="../Lists/Configuration Values">Site Configuration</a></li>
<li><a href="../Lists/Site Assets">Site Assets</a></li>
</ul>
</div>
</asp:Content>
Maybe you are looking for
-
Inserting data in remote database with remote procedure
Hi, I have a problem concerning inserting data in a remote database (10g) by using a remote procedure. I call the procedure from a 11g database just by doing: begin getlocalfilecontent@remoteserv(param) commit; end; And it wouldn't insert the data in
-
Same customer and vendor number
Not sure if this is the correct forum to post this question, but I'll give it a try...... We are using BP and want to use same number for both customer and vendor. How can we achieve this?
-
Allignment in ALV top of page using oops
I am displaying some fields with their values on top of page using Classes.but i am not able to get a proper alignment. i want the field and their respective values one-below the other with once the field description and the values below after the de
-
Is it possible to make an app with any adobe product?
For our site xterminator.nl we want to make a app. is that possible?
-
Hi, is there a way to create items in a page dynamically? For example, I have a query that returns n values. I need to show the n values in n different items, but the n items could change for the next query. Is there a way? Regards, Jeannine