Help with ZIP files

Hi guys,
I'm having some problems with creating arhives of my files. When I compress them (control>creeate arhive) they are still the same size zipped or not.
What am I doing wrong?
Thanks

Thanks, It is a PGF files that I'm having problems with.
After I read this ^ , I compressed some text files and it works.
So there is nothing wrong with my G5.
Thanks

Similar Messages

I receive many e-mails with zipped files. In the past few weeks I can no longer open them as I used to. I get a window welcoming me to the Application Loader. ( What is an Application Loader?) It says I need my iTunes Connect login, but when I try my

I receive many e-mails with zipped files. I can no longer open or unzip my files. A window welcoming me to Application Loader drops down. It prompts for an iTunes Connect login, but will no accept my iTunes login. I have no way to open or unzip my files. Help!!!!

Application Loader, unless there's another one I'm not familiar with, is part of the iOS SDK. That have usurped the .zip, or you may have removed that application but your Mac is still holding onto the mapping of Zip files to that application. Select a .zip file in Finder, Get Info, and go to the Open with section. Select Archive Utility and click Change All. That should fix the problem.
Regards.

Xml file to mail scenario with zip file as an attachment

Hi experts,
I have a file to mail scenario. File is in xml format.
At receiver side, first I want to zip this file and send the zip file as an attachment using mail adapter.
How can i achieve this?
Regards
Divia

Hi Shabarish,
In the module tab i have specified the below beans
localejbs/AF_Modules/MessageTransformBean                           contentType
AF_Modules/PayloadZipBean                                                    zip
sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean           mail
In the module configuration i mentioned as
Transform.ContentDescription   file
Transform.ContentDisposition   attachment:filename="file.xml"
zip.filenameKey                      contentType
zip.mode                                zipOne
Now i am getting the mail with zip file as an attachment.But the name of the attachment i got is MainDocument.zip
Even the file name inside the zip is MainDocument.xml.
How can i specify my own file name for both zip file and the file inside the archieve folder.Please help me.
Regards
Divia

Can some help with CR2 files ,Ican`t see CR2 files in adobe bridge

can some help with CR2 files ,I can`t see CR2 files in adobe bridge when I open Adobe Photoshop cs5- help- about plugins- no camera raw plugins. When i go Edit- preference and click on camera raw shows message that Adobe camera raw plugin cannot be found

That's strage. Seems that the Camera Raw.8bi file has been moved to different location or has gone corrupt. By any chance did you try to move the camera raw plugin to a custom location?
Go To "C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS5\File Formats" and look for Camera Raw.8bi file.
If you have that file there, try to download the updated camera raw plugin from the below location.
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5371&fileID=5001
In case you ae not able to locate the Camera Raw.8bi file on the above location, then i think you need to re-install PS CS5.
[Moving the discussion to Photoshop General Discussions Forum]

Help with add file name problem with Photoshop CS4

Frustrating problem: Help with add file name problem with Photoshop CS4. What happens is this. When I am in PS CS4 or CS3 and run the following script it runs fine. When I am in Bridge and go to tools/photoshop/batch and run the same script it runs until it wants interaction with preference.rulerunits. How do I get it to quit doing this so I can run in batch mode? Any help is appreciated. HLower
Script follows:
// this script is another variation of the script addTimeStamp.js that is installed with PS7
//Check if a document is open
if ( documents.length > 0 )
var originalRulerUnits = preferences.rulerUnits;
preferences.rulerUnits = Units.INCHES;
try
var docRef = activeDocument;
// Create a text layer at the front
var myLayerRef = docRef.artLayers.add();
myLayerRef.kind = LayerKind.TEXT;
myLayerRef.name = "Filename";
var myTextRef = myLayerRef.textItem;
//Set your parameters below this line
//If you wish to show the file extension, change the n to y in the line below, if not use n.
var ShowExtension = "n";
// Insert any text to appear before the filename, such as your name and copyright info between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextBefore = "Lower© ";
// Insert any text to appear after the filename between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextAfter = " ";
// Set font size in Points
myTextRef.size = 10;
//Set font - use GetFontName.jsx to get exact name
myTextRef.font = "Arial";
//Set text colour in RGB values
var newColor = new SolidColor();
newColor.rgb.red = 0;
newColor.rgb.green = 0;
newColor.rgb.blue = 0;
myTextRef.color = newColor;
// Set the position of the text - percentages from left first, then from top.
myTextRef.position = new Array( 10, 99);
// Set the Blend Mode of the Text Layer. The name must be in CAPITALS - ie change NORMAL to DIFFERENCE.
myLayerRef.blendMode = BlendMode.NORMAL;
// select opacity in percentage
myLayerRef.opacity = 100;
// The following code strips the extension and writes tha text layer. fname = file name only
di=(docRef.name).indexOf(".");
fname = (docRef.name).substr(0, di);
//use extension if set
if ( ShowExtension == "y" )
fname = docRef.name
myTextRef.contents = TextBefore + " " + fname + " " + TextAfter;
catch( e )
// An error occurred. Restore ruler units, then propagate the error back
// to the user
preferences.rulerUnits = originalRulerUnits;
throw e;
// Everything went Ok. Restore ruler units
preferences.rulerUnits = originalRulerUnits;
else
alert( "You must have a document open to add the filename!" );

you might want to try the scripting forum howard:
http://www.adobeforums.com/webx?13@@.ef7f2cb

How can I install attachments for SAP notes with zip-files ???

How can I install attachments for SAP notes with zip-files ???

Can you elaborate on your question? How exactly is your question related to SAP NetWeaver Portal: Application Integration? If you are really asking how to install attachments contained in SAP notes, there is no automatic/general way and you should ask your question in the Software Support and Maintenance space to begin with. What SAP note(s) are you looking at installing?

Help with html files when placing Web Content overlay

Hi there,
We have an educational app with lots of interactive exercises - all of which were initially designed in Flash.
I have converted the fla files into hmtl using Wallaby. For each fla file, Wallaby creates a js, css and html file as well as an assets folder.
When I place the Web Content frame, and link it to the html file, do I link it to the actual html file Wallaby created? It won't let me select the folder with all of the files in it as is, and I can't link it to a zip file either... So how does it recognise the assets if I only select the html file? (see screenshot)
Or do I need to add an HTMLResources folder and link it to that?
Thanks in advance for any help given.

You link to the HTML file but make sure these things are in their own folder or InDesign will add EVERYTHING in the folder that has the html file in it.
Bob

File to mail scenario with zip file as an attachment

Hi experts,
I have a file to mail scenario.The mail contains a zip file as an attachment.
The file in the input folder is a zip file. I want to send this zip file via email using mail adapter.How can i achieve this?Please help me to solve it out.
Regards
Divia

Hi Narath,
Do check the below link it will be helpfull
Troubleshooting SOAP, HTTP and Mail Adapter Scenarios with TCPGateway
Thanks
Sampath

Please help with medical files I need to open immediately and cannot.

I have some medical files sent to me that I desperately need to open. The instructions were to copy the file to the desktop, a zip file by the way, left click using the mac button and "I" at the same time. A menu would open saying "open with" and I was to choose stuffit. Then enter the password when prompted. I was able to get to the stuffit part and the password prompt and entered the password, but nothing happened. I keep getting the error message: Unable to unarchive "LoganRobertPEME.zip" into "Desktop". (Error 1-Operation not permitted.)
Can anyone help me open this file?
Thanks

Contact whoever sent you the file. Perhaps it's a bad archive. Or be sure you entered the password correctly. They are case sensitive.

Can you help with rematching file names

After a computer crash needed to reload my library. When doing this I accidently clicked the option to add track numbers to song names.
Later I was able to locate my iTunes XML from my old PC, however many of the songs (5000 out of 6000) no don't match because the original song name has been changed since my stupid error caused the files names to get the song number in front of them.
Anybody have any tips for matching the filenames back up. In my original library some files had track numbers in front and some did not. How can I match them back up. I'm comfortable programming and modifying the iTunes XML but I can't figure out a good way to list out the contents of my hard drive to do the actual matching.
Tony

Because this forum software is so absolutely USELESS now, you don't get to see the whole of the question in this view. In the other (non-list) view it says:
"can you help with a technical problem with the stereo imagery option ? it won't take out lead vocal in a stereo mp3"
And the answer is that if you can't isolate the vocal in the stereo field, or it is one of these odd ones where it's used inverted polarity in different parts of the stereo signal for the same vocal, then you won't be able to. But without a sample, it's impossible to tell. If you can post a link to one, that might help. It has to be external to this site though - Adobe in their infinite wisdom don't allow the posting of audio files on their audio U2U forum. Helpful, that, isn't it?

Help with Reconnecting Files

Over this past weekend I was moving, via Relocate Masters, large numbers of images from managed status on my MacBook Pro to referenced status on an external drive (an Air Disk, to be precise). This had gone fine for thousands of images, but Sunday night I returned to the computer to find that it was completely locked up in mid-Relocate, and seemed to have been locked up for a while. I'm not sure what happened, but it seemed bad -- I couldn't get to the Force Quit dialog, or anywhere else. I powered down by holding in the power button.
Upon resurrecting things, Aperture would not open the library. Long story shorter, I rebuilt the database and was then able to see the library contents again. But then I noticed that many files were "offline." Digging further, and using the Manage Referenced Files box, I discovered that some 3500 files need to be reconnected.
The Reconnect All button did a little bit of magic for me, but now I've gotten to a point where using Reconnect All only reconnects one file at a time. I was renaming files as I Relocated Masters, and my fear is that this is what has caused the disconnect. *So first,* can anyone tell me that this is what has caused the problem (the problem being my apparent need to now reconnect 3400 files, one-by-one)?
*Second, and more importantly to me, do I have any recourse beyond reconnecting one-by-one?* Again, the problem seems to me to be that the library file expects a file named image.jpg (or whatever), because the change of the file name to greatimage.jpg that occurred during Relocation did not get written to the library file.
Many thanks for all help and suggestions.

Homme dArs wrote:
I hope someone else can join in with a definitive answer to your problem, but I don't believe you will be happy using the configuration you are attempting to set up.
Having Aperture access your images via wireless is going to be very very slow, and any connection problems will be very frustrating. I have even abandoned the idea of using wireless backup of image files because it so slow.
Perhaps someone can help with your immediate problem, but I would strongly suggest you find a way to store your referenced files locally (a firewire drive would be ideal).
Thanks. I certainly appreciate your thought, and before trying it myself, my instinct was the same as yours. That said, until the present problem cropped up, I have to say it has been quite a good solution. My network is 802.11n, and I've noticed no real lag in accessing the files or otherwise using Aperture with a library stored as this is.
But yes, I hope someone is able to help me get these 3400-some files reconnected short of one-by-one.
Thank you for your comments.

Help with moving files

I'm having problems copying data across my network to my new mac mini and i'm looking for some help with how to resolve this issue.
I'm using "Connect to Server' to connect via SMB to a Vista x64 machine that has the files I need to copy. I'm mounting the share as the user that has permissions to the files on the vista client. The connection is fine, but when I start the copy process, I receive an error message about not having the appropriate permissions to copy files and then the entire copy process fails. Here is the exact error message:
Copy
The operation cannot be completed because you do not have sufficient privileges for some of the items.
OK
From the vista machine I have logged in as the same user and I have taken ownership of ALL of the files and folders I'm trying to copy. I also made sure that the folder is shared with EVERYONE having full access (not something I would normally do, but figured it might help this situation). The vista machine is in a workgroup if that makes a difference.
Question 1: how can I do this via command line so that instead of stopping the entire file copy it skips the ones it can't copy and copies the rest of them?
With hundreds of subfolders and thousands of files, I have no idea which ones it is failing to copy making this process quite painful.
I'm also stuck on another basic issue - when I originally connected to the share, I told the OSX machine to remember the password. If I want to reconnect to the share using a different username and different password, how do I get OSX to reprompt me for this information?
Help

You are probably better off using
ditto
In a terminal
man ditto
and read the description and instructions.
Yes, sadly, many copy process when the fail at a file abort the rest of the process. Windows does this as well.

Need help with connecting file inputs to arrays

In this assignment I have a program that will do the following: display a list of names inputed by the user in reverse order, display any names that begin with M or m, and display any names with 5 or more letters. This is all done with arrays.
That was the fun part. The next part requires me to take the names from a Notepad file, them through the arrays and then output them to a second Notepad file.
Here is the original program: (view in full screen so that the code doesn't get jumbled)
import java.io.*;       //Imports the Java library
class progB                    //Defines class
    public static void main (String[] arguments) throws IOException
        BufferedReader keyboard;                                  //<-
        InputStreamReader reader;                                 // Allows the program to
        reader = new InputStreamReader (System.in);               // read the the keyboard
        keyboard = new BufferedReader (reader);                  //<-
        String name;                 //Assigns the name variable which will be parsed into...
        int newnames;               //...the integer variable for the amount of names.
        int order = 0;              //The integer variable that will be used to set the array size
        String[] array;             //Dynamic array (empty)
        System.out.println (" How many names do you want to input?");   //This will get the number that will later define the array
        name = keyboard.readLine ();
        newnames = Integer.parseInt (name);                                         // Converts the String into the Integer variable
        array = new String [newnames];                                               //This defines the size of the array
        DataInput Imp = new DataInputStream (System.in);       //Allows data to be input into the array
        String temp;
        int length;                                                                  //Defines the length of the array for a loop later on
            for (order = 0 ; order < newnames ; order++)                                //<-
            {                                                                           // Takes the inputed names and
                System.out.println (" Please input name ");                            // gives them a number according to
                temp = keyboard.readLine ();                                           // the order they were inputed in
                array [order] = temp;                                                  //<-
            for (order = newnames - 1 ; order >= 0 ; order--)                                //<-
            {                                                                                // Outputs the names in the reverse
                System.out.print (" \n ");                                                   // order that they were inputed
                System.out.println (" Name " + order + " is " + array [order]);             //<-
            for (order = 0 ; order < newnames ; order++)                                  //<-
                if (array [order].startsWith ("M") || array [order].startsWith ("m"))     // Finds and outputs any and all
                {                                                                         // names that begin with M or m
                    System.out.print (" \n ");                                            //
                    System.out.println (array [order] + (" starts with M or m"));         //
                }                                                                         //<-
            for (order = 0 ; order < newnames ; order++)                                            //<-
                length = array [order].length ();                                                   //
                if (length >= 5)                                                                    // Finds and outputs names
                {                                                                                  // with 5 or more letters
                    System.out.print (" \n ");                                                      //
                    System.out.println ("Name " + array [order] + " have 5 or more letters ");      //<-
}The notepad file contains the following names:
jim
laruie
tim
timothy
manny
joseph
matty
amanda
I have tried various methods but the one thing that really gets me is the fact that i can't find a way to connect the names to the arrays. Opening the file with FileInputStream is easy enough but using the names and then outputing them is quite hard. (unless i'm thinking too hard and there really is a simple method)

By "connect", do you just mean you want to put the names into an array?
array[0] = "jim"
array[1] = "laruie"
and so on?
That shouldn't be difficult at all, provided you know how to open a file for reading, and how to read a line of text from it. You can just read the line of text, put it in the array position you want, until the file is exhausted. Then open a file for writing, loop through the array, and write a line.
What part of all that do you need help with?

How to send mail with zip file

Hi,
We are sending email in one of our program with an attached xls file. We are sending email using classes (cl_bcs).
Our requirement is to send the attached file in zip format to reduce the size.
Please provide if you have any pointers to get zipped file in attachment.
Regards,
Mamta

Dear Mamta,
Check this class,
CL_ABAP_GZIP                               -- Class for (De)Compression (GZIP)
CL_ABAP_GZIP_BINARY_STREAM -- Class for Data Compression (GZIP, Streaming)
CL_ABAP_GZIP_TEXT_STREAM       -- Class for Text Compression (GZIP, Streaming)
IF_ABAP_GZIP_BINARY_HANDLER -- IF for Output Buffer Handler
IF_ABAP_GZIP_TEXT_HANDLER      -- IF for Output Buffer Handler
Regards,
Surjith

Help with finding files

I would really appreciate any help on this! I have my itunes library on an external hard drive. The power adapter to that drive failed. I replaced it, but now when I open itunes it doesn't recognize where any of my files are. A friend told me to try to go into Edit>Preferences and find the drive of my hard drive and reset that as where the files are. That didn't work. I can go in manually and click on a song where the window pops up that itunes can't find the file, and I am able to find it and then it will play. But to do that with all files in my library would take forever. Thank you so much for any help!
(I have itunes 8)

Try This. Hold the shift key down, and open iTunes. Do not let up on the shift key until you get a window that asks you to choose a library, or create a new library. If iTunes opens without giving you that choice, just close it and re-open it with the shift key down. Nine times out of Ten it works on the first try. Click "choose a library". You will get another window that allows you to navigate to your hard drive and show iTunes where your music is stored. In a folder called iTunes or iTunes Music, choose "iTunes Library.itl" This should bring back your entire library the way it was when you last used it.

Help with ZIP files

Similar Messages

Maybe you are looking for