HELP: WL 8.1 run unexpectedly slow on solaris 9 with low CPU utilization
Hi All
I have setup my app to run on WL8.1 + solaris 9 env + SUN mid-end series server.
JVM was configured to use 3G RAM and there are still abundant RAM on the HW server.
I tried out a use case, it took long time to get response (~ 2 minutes). But the
CPU utilization has been always lower 20%. I have tried out the same test case
on a wintel server with 500 RAM allocated to JVM, the response time is much quicker
(less than 30 sec). I did the same on solaris 8 with 3G RAM and had used alternate
threads library mode (changing LD_LIBRARY_PATH to include /usr/lib/lwp) which
is the default mode adopted by solaris 9. The same use case responded much quicker
and comparable to abovementioned test on wintel. Can anybody advice on how to
tune WL 8.1 on solaris 9 so as to make it perform best ? Is there any special
trick ?
thank u very much for any advice in advance
dso
"Arjan Kramer" <[email protected]> wrote:
>
Hi dso,
I'm running the same two configs and run into the same performance issues
as you do. Please let me know if you any response on this!
Regards,
Arjan Kramer
"dso" <[email protected]> wrote:
Hi All
I have setup my app to run on WL8.1 + solaris 9 env. JVM was configured
to use
3G RAM and there are still abundant RAM on the HW server. I tried out
a use case,
it took long time to get response (~ 2 minutes). But the CPU utilization
has been
always lower 20%. I have tried out the same test case on a wintel server
with
500 RAM allocated to JVM, the response time is much quicker (less than
30 sec).
I did the same on solaris 8 with 3G RAM and had used alternate threads
library
mode (changing LD_LIBRARY_PATH to include /usr/lib/lwp) which is the
default mode
adopted by solaris 9. The same use case responded much quicker and comparable
to abovementioned test on wintel. Can anybody advice on how to tuneWL
8.1 on
solaris 9 so as to make it perform best ? Is there any special trick
thank u very much for any advice in advance
dso
There could be many factors that add to performance degradation, database, OS,
Network, app config etc, so without knowing too much its difficult to tell.
Can you please supply the startup JAVA options used to set the heap etc. Having
larger heao sizes is not always the best approach of building HA applications...the
bigger they are, the bigger they fall. I'd suggest using many but smaller instances.
Provide the heap info from NT also.
BTW, when weblogic starts, can you tell me how much memory is being used in the
console...ie the footprint of weblogic + your application.
Many Thanks
Similar Messages
-
Slow slow slow...even with low CPU and memory usage.
Sometimes my Mac gets really slow, especially with applications, and even more especially when opening applications. What I don't understand is that when I check Activity Monitor during slow times, it shows plenty of CPU and memory still free, far from being maxed out. I try to keep a good chunk of my hard drive available for virtual memory too, so I'm unsure where its getting bogged down.
Any ideas?You may just need a little maintenance:
Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.5.1 or higher are Intel Mac compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. Versions 1.5.1 or later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts had been significantly reduced in Tiger and Leopard. These utilities have limited or no functionality with Snow Leopard and should not be installed.
OS X automatically defrags files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old logfiles and archives, clearing caches, etc. Other utilities are also available such as Onyx, Leopard or Snow Leopard Cache Cleaner, CockTail, and Xupport, for example.
For emergency repairs install the freeware utility Applejack (not compatible with Snow Leopard.) If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline. Note that AppleJack 1.5 is required for Leopard. AppleJack is not compatible with Snow Leopard.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. Carbon Copy Cloner (Donationware)
6. SuperDuper! (Commercial)
7. Intego Personal Backup (Commercial)
8. Data Backup (Commercial)
9. SilverKeeper 2.0 (Freeware)
10. MimMac (Commercial)
11. Tri-Backup (Commercial)
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at www.versiontracker.com and www.macupdate.com. -
Help please! Macbook running very slow after Yosemite!
Please help me figure this out. I am a Mac Newbie (inherited a MacBook)
Here are my EtreCheck results:
Problem description:
MB running super slow after yosemite!
EtreCheck version: 2.1.2 (105)
Report generated December 13, 2014 at 10:16:11 PM CST
Hardware Information: ℹ️
MacBook (13-inch, Late 2009) (Verified)
MacBook - model: MacBook6,1
1 2.26 GHz Intel Core 2 Duo CPU: 2-core
2 GB RAM Upgradeable
BANK 0/DIMM0
1 GB DDR3 1067 MHz ok
BANK 1/DIMM0
1 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 21 days 0:27:59
Disk Information: ℹ️
Hitachi HTS545025B9SA02 disk0 : (250.06 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 249.20 GB (183.92 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R UJ-898
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Extensions
[loaded] com.webroot.driver.WebrootSecureAnywhere (78 - SDK 10.9) [Support]
/System/Library/Extensions
[not loaded] com.novatelwireless.driver.3G (2.2.8) [Support]
[not loaded] com.novatelwireless.driver.DisableAutoInstall (1.2) [Support]
[not loaded] com.sierrawireless.driver.SierraSupport (1.4.16) [Support]
[not loaded] com.sierrawireless.driver.SierraSwitch (1.2.4) [Support]
[not loaded] com.sierrawireless.driver.SierraSwitchKicker (1.0.0) [Support]
/System/Library/Extensions/NovatelWireless3G.kext/Contents/PlugIns
[not loaded] com.novatelwireless.driver.3GData (2.2.8) [Support]
Problem System Launch Agents: ℹ️
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.CallHistorySyncHelper.plist
[failed] com.apple.cloudd.plist [Details]
[failed] com.apple.coreservices.appleid.authentication.plist
[failed] com.apple.nsurlsessiond.plist [Details]
[failed] com.apple.rcd.plist
[failed] com.apple.security.cloudkeychainproxy.plist
[failed] com.apple.spindump_agent.plist [Details]
[failed] com.apple.telephonyutilities.callservicesd.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.awdd.plist
[failed] com.apple.ctkd.plist
[failed] com.apple.GSSCred.plist
[failed] com.apple.icloud.findmydeviced.plist [Details]
[failed] com.apple.ifdreader.plist
[failed] com.apple.nehelper.plist
[failed] com.apple.periodic-daily.plist [Details]
[failed] com.apple.periodic-monthly.plist [Details]
[failed] com.apple.sandboxd.plist
[failed] com.apple.tccd.system.plist [Details]
[failed] com.apple.wdhelper.plist
Launch Agents: ℹ️
[running] com.webroot.WRMacApp.plist [Support]
[running] com.webroot.WRMacBackNSync.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.sierrawireless.SierraReset.plist [Support]
[not loaded] com.sierrawireless.SWoCTool.plist [Support]
[running] com.webroot.security.mac.plist [Support]
[running] com.webroot.webfilter.mac.plist [Support]
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Archive Utility UNKNOWN (missing value)
iTunes Application (/Applications/iTunes.app)
Webroot SecureAnywhere Application (/Applications/Webroot SecureAnywhere.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
LogMeIn: Version: 1.0.586 [Support]
npwebroot: Version: 2.0.15 [Support]
QuickTime Plugin: Version: 7.7.3
LogMeInSafari32: Version: 1.0.586 [Support]
OfficeLiveBrowserPlugin: Version: 12.2.0 [Support]
LogMeInSafari64: Version: 1.0.586 [Support]
Silverlight: Version: 5.1.20913.0 - SDK 10.6 [Support]
iPhotoPhotocast: Version: 7.0
Safari Extensions: ℹ️
Password Manager
webfilter
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
45% WSDaemon
5% WindowServer
0% AppleSpell
0% Dock
0% nbagent
Top Processes by Memory: ℹ️
268 MB firefox
75 MB WindowServer
37 MB Finder
32 MB mds
26 MB softwareupdated
Virtual Memory Information: ℹ️
194 MB Free RAM
530 MB Active RAM
205 MB Inactive RAM
485 MB Wired RAM
26.89 GB Page-ins
1.90 GB Page-outs
Diagnostics Information: ℹ️
Dec 13, 2014, 12:20:48 PM plugin-container_2014-12-13-122048_[redacted].crash
Dec 13, 2014, 09:31:05 PM com.apple.RemindersNC_2014-12-13-213105_[redacted].crash
Thanks a million!What about this?
Good brand and a little cheaper:
http://www.newegg.com/Product/Product.aspx?Item=N82E16820148604
Would it be worth the $80 or should I just put it toward a used MBP?
Thanks! -
My Specs:
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 9 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005C.B08
I use FCP for editing
I've had the previous OS 10.4, everything ran perfect! Now after installing the new OS 10.5, everything, and I meant everything from all my software to Safari runs extremely slow. Anyone have any ideas on how to fix this problem? I have over 126 Gig of disk space left on my main drive and over 700 gig on my other drives.
Thanks,
LisaHello Lisa, your system is quite impressive. You have plenty of Ram (9GB), 2.66Ghz. My suggestion would to repair disk permissions from your utilities folder, zap the Ram, Maybe repair the drive from the Leopard disk and look at the activity monitor too see what is going on. I would bet it is nothing serious, only a bad setting. Try these steps and post back.
Ray -
Help - My Mac is running very slow
My Mac claims to be using 50.2 gb in Other and I dont know how to find out what an earth it all is. I need to reduce as I only have 21gb left of my 120gb and my machine is running a little slow.
Can anyone help meFirst, back up all data immediately, as your boot drive might be failing.
Take these steps when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
You must be logged in as an administrator to carry out this step.
Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some personal information, such as your name, may appear in the log. Edit it out before posting. -
4.4 running extremely slow, had no issues with 4.3
4.4 is extremly sluggish for me. Even something as simple as updating meta-data causes the program to hang. I had no issues with 4.3
System info:
OSX10.8.4
3.33 GHz 6 core mac pro
24GB 1333Mhz DDR3
SSD hard drives
I am getting the following error's in Apple systlem log:
Apple System Log (ASL) Messages:
Source: /var/log/asl
Size: 131 KB (131,165 bytes)
Last Modified: 4/29/13 3:17 PM
Recent Contents: ...
2013-04-29 15:09:45 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger DEBUG adding Navigator provider provider, to render queue
2013-04-29 15:09:45 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE setNegativeWillRenderOnWorkerThread( userdata: 0x18e181070, 0 )
2013-04-29 15:09:45 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger DEBUG Loupe provider scheduling render for level 1 of 1931 x 1287 image with area 1931 x 1287. The request was for normal rect (-0.018643, -0.012432) x (1.019161, 1.012432) with bounds ( 1931.000000, 1287.000000 )
2013-04-29 15:09:45 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger DEBUG adding Loupe provider provider, to render queue
2013-04-29 15:09:45 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE setNegativeWillRenderOnWorkerThread( userdata: 0x18e181070, 0 )
2013-04-29 15:09:45 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger DEBUG Loupe provider scheduling render for level 1 of 1931 x 1287 image with area 1931 x 1287. The request was for normal rect (-0.018643, -0.012432) x (1.019161, 1.012432) with bounds ( 1931.000000, 1287.000000 )
2013-04-29 15:09:48 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger DEBUG adding Loupe provider provider, to render queue
2013-04-29 15:09:48 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger DEBUG adding Navigator provider provider, to render queue
2013-04-29 15:09:48 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE setNegativeWillRenderOnWorkerThread( userdata: 0x18e181070, 0 )
2013-04-29 15:09:48 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger DEBUG Loupe provider scheduling render for level 1 of 1931 x 1287 image with area 1931 x 1287. The request was for normal rect (-0.018643, -0.012432) x (1.019161, 1.012432) with bounds ( 1931.000000, 1287.000000 )
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.088099 secs)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001311 secs)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001281 secs)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001464 secs)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001214 secs)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001175 secs)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001230 secs)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001230 secs)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001239 secs)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001207 secs)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001177 secs)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001177 secs)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001442 secs)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.111440 secs)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001424 secs)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001264 secs)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001216 secs)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001268 secs)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001267 secs)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001211 secs)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001289 secs)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001180 secs)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:09:49 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001239 secs)
2013-04-29 15:09:50 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:09:50 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:09:50 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001186 secs)
2013-04-29 15:09:50 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:09:50 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:09:50 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001190 secs)
2013-04-29 15:16:28 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger DEBUG adding Loupe provider provider, to render queue
2013-04-29 15:16:28 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger DEBUG adding Navigator provider provider, to render queue
2013-04-29 15:16:28 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE setNegativeWillRenderOnWorkerThread( userdata: 0x13a330c10, 0 )
2013-04-29 15:16:28 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger DEBUG Loupe provider scheduling render for level 5 of 81 x 54 image with area 81 x 54. The request was for normal rect (-0.014856, -inf) x (1.014856, inf) with bounds ( 1077.000000, 0.000000 )
2013-04-29 15:16:28 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger DEBUG Loupe provider will render on main thread because missing rendered image
2013-04-29 15:16:28 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE FINISHED Loupe provider blocked main thread for 0.186125 secs. level 1 of 1077 x 718 image with area 1077 x 718. nil
2013-04-29 15:16:28 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger DEBUG Navigator provider will render on main thread because missing rendered image
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE FINISHED Navigator provider blocked main thread for 0.071758 secs. level 3 of 219 x 146 image with area 219 x 146. nil
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE setNegativeWillRenderOnWorkerThread( userdata: 0x13a330c10, 0 )
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger DEBUG Navigator provider scheduling render for level 2 of 350 x 234 image with area 350 x 234. The request was for normal rect (0.000000, 0.000000) x (1.000000, 1.000000) with bounds ( 350.000000, 233.333333 )
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (0 active which is less than 12)
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.049956 secs)
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.004439 secs)
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE setNegativeWillRenderOnWorkerThread( userdata: 0x13a330c10, 0 )
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger DEBUG scheduling preview system render for level 1 of 1082 x 722 image with area 1082 x 722. The request was for whole image render with bounds ( 1082.000000, 721.333333 )
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (0 active which is less than 12)
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.002194 secs)
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger DEBUG adding Loupe provider provider, to render queue
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger INFO Finished Render in Preview System Render provider, got pixmap that is 1082.000000 x 722.000000
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE setNegativeWillRenderOnWorkerThread( userdata: 0x13a330c10, 0 )
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger DEBUG Loupe provider scheduling render for level 1 of 1077 x 718 image with area 1077 x 718. The request was for normal rect (-0.014856, -0.742340) x (1.014856, 1.743733) with bounds ( 1077.000000, 718.000000 )
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001642 secs)
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.002139 secs)
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001053 secs)
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001317 secs)
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.005031 secs)
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.000814 secs)
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.002382 secs)
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001600 secs)
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.002909 secs)
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.000831 secs)
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.002866 secs)
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001231 secs)
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.000740 secs)
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:16:29 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001418 secs)
2013-04-29 15:16:30 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger DEBUG adding Loupe provider provider, to render queue
2013-04-29 15:16:30 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger DEBUG adding Navigator provider provider, to render queue
2013-04-29 15:16:30 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:16:30 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:16:30 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.275295 secs)
2013-04-29 15:16:30 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE setNegativeWillRenderOnWorkerThread( userdata: 0x1427b4ce0, 0 )
2013-04-29 15:16:30 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger DEBUG Loupe provider scheduling render for level 2 of 1077 x 718 image with area 1077 x 718. The request was for normal rect (-0.014856, -0.742340) x (1.014856, 1.743733) with bounds ( 1077.000000, 718.000000 )
2013-04-29 15:16:30 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (0 active which is less than 12)
2013-04-29 15:16:30 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:16:30 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.160684 secs)
2013-04-29 15:16:30 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:16:30 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:16:30 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001258 secs)
2013-04-29 15:16:31 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger DEBUG Loupe provider drawRenderedImage is reusing render
2013-04-29 15:16:31 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger DEBUG Loupe provider drawRenderedImage is reusing render
2013-04-29 15:16:31 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger DEBUG Loupe provider drawRenderedImage is reusing render
2013-04-29 15:16:31 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger DEBUG Loupe provider drawRenderedImage is reusing render
2013-04-29 15:16:31 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger DEBUG Loupe provider drawRenderedImage is reusing render
2013-04-29 15:16:31 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:16:31 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:16:31 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001358 secs)
2013-04-29 15:16:31 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger DEBUG Loupe provider drawRenderedImage is reusing render
2013-04-29 15:16:31 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger DEBUG Loupe provider drawRenderedImage is reusing render
2013-04-29 15:16:31 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger DEBUG Loupe provider drawRenderedImage is reusing render
2013-04-29 15:16:31 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger DEBUG Loupe provider drawRenderedImage is reusing render
2013-04-29 15:16:31 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger DEBUG Loupe provider drawRenderedImage is reusing render
2013-04-29 15:16:31 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger DEBUG Loupe provider drawRenderedImage is reusing render
2013-04-29 15:16:31 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger DEBUG Loupe provider drawRenderedImage is reusing render
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger DEBUG Loupe provider drawRenderedImage is reusing render
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001346 secs)
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001162 secs)
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001172 secs)
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001154 secs)
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger DEBUG Loupe provider drawRenderedImage is reusing render
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001391 secs)
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001444 secs)
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001288 secs)
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001200 secs)
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001179 secs)
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger DEBUG adding Loupe provider provider, to render queue
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE setNegativeWillRenderOnWorkerThread( userdata: 0x1427b4ce0, 0 )
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger DEBUG Loupe provider scheduling render for level 2 of 1287 x 858 image with area 1287 x 858. The request was for normal rect (-0.012432, -0.667832) x (1.012432, 1.667832) with bounds ( 1287.000000, 858.000000 )
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (0 active which is less than 12)
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.153765 secs)
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (0 active which is less than 12)
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001991 secs)
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (0 active which is less than 12)
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.065151 secs)
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:16:32 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.120803 secs)
2013-04-29 15:16:33 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:16:33 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:16:33 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finish DevelopLoupeView:sampleRenderedAtXY (0.001389 secs)
2013-04-29 15:16:33 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE isLengthlyRenderActiveForNegative? NO (negative not in list)
2013-04-29 15:16:33 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE start DevelopLoupeView:sampleRenderedAtXY
2013-04-29 15:16:33 -0700 Adobe Photoshop Lightroom 4[357]: DevelopMultiThreadRenderLogger TRACE finiWell, Adobe normally only offers the most recent for download, so that'll be 4.4.
Somebody else may know where/how to get a copy of 4.3, but I don't. - I take it you deleted the 4.3 installer from your hard drive already?
I suppose this goes without saying now, but just in case it doesn't: in the future, consider not deleting the previous version installer until the latest version is proving itself to be OK.
Another option to consider is downloading/installing the Lr5 beta and see how that goes for ya.
Rob -
Help - Firefox is running real slow, loading pages, etc compared to i.e/safari
hey guys appreciate the help.. firefox is running real slow lately.. like loading pages takes a good 2 minutes compared to i.e or safari loading in under 2 seconds
i dont have many addons, just an extended status bar and thats pretty much it
what can i do other then just reinstalling ??'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences'''<Enter> in the address bar
Select '''Advanced > General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart. -
Application running too slow on sun T5440 but run normal on sun M3000
Hi all,
I have application running on sun server T5440 4x8x1.4 GHz, 64 GB RAM, application running very slow though load average too low. when I install my application on another server SUN M3000 (One CPU 1x8x2.5GHz, 8GB RAM), application run smoothly.
Here is my server T5440 info:
Code:
bash-3.00# uname -a
SunOS 5.10 Generic_142909-17 sun4v sparc SUNW,T5440
Psrinfo -pv
Code:
bash-3.00# psrinfo -pv
The physical processor has 64 virtual processors (0-63)
UltraSPARC-T2+ (chipid 0, clock 1414 MHz)
The physical processor has 64 virtual processors (64-127)
UltraSPARC-T2+ (chipid 1, clock 1414 MHz)
The physical processor has 64 virtual processors (128-191)
UltraSPARC-T2+ (chipid 2, clock 1414 MHz)
The physical processor has 64 virtual processors (192-255)
UltraSPARC-T2+ (chipid 3, clock 1414 MHz)
/etc/system
Code:
set semsys:seminfo_semopm=10000
set semsys:seminfo_semmsl=10000
set semsys:seminfo_semmni=1024
set max_nprocs=50000
set msgsys:msginfo_msgmnb=2097152
set msgsys:msginfo_msgmni=2560
set msgsys:msginfo_msgtql=2560
set shmsys:shminfo_shmmax=1073741824
set shmsys:shminfo_shmmni=1000
set rlim_fd_cur=10000
Ipcs
Code:
bash-3.00# ipcs -a
IPC status from as of Wed Jun 13 12:31:01 ICT 2012
T ID KEY MODE OWNER GROUP CREATOR CGROUP CBYTES QNUM QBYTES LSPID LRPID STIME RTIME CTIME
Message Queues:
q 62 0x1388 --rw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:36:22
q 61 0x1387 --rw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:36:22
q 60 0x1318 --rw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:36:22
q 59 0x12a9 --rw-rw-rw- topx topx topx topx 0 0 2097152 9069 9071 10:25:38 10:25:38 8:36:22
q 58 0x100f --rw-rw-rw- topx topx topx topx 0 0 2097152 9069 9070 10:06:16 10:06:16 8:36:22
q 57 0xfa0 -Rrw-rw-rw- topx topx topx topx 0 0 2097152 9071 9069 10:25:38 10:25:38 8:36:22
q 56 0xf30 --rw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:36:20
q 55 0xc27 -Rrw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:28:14
q 54 0xbb8 -Rrw-rw-rw- topx topx topx topx 0 0 2097152 172 9066 10:47:08 10:47:08 8:28:14
T ID KEY MODE OWNER GROUP CREATOR CGROUP NATTCH SEGSZ CPID LPID ATIME DTIME CTIME
Shared Memory:
T ID KEY MODE OWNER GROUP CREATOR CGROUP NSEMS OTIME CTIME
Semaphores:
s 104 0x9c4 --ra-ra-ra- topx topx topx topx 3 12:31:00 8:36:20
s 103 0xa8c --ra-ra-ra- topx topx topx topx 1 8:36:20 8:36:20
s 102 0xd48 --ra-ra-ra- topx topx topx topx 1 8:36:20 8:36:20
s 101 0xce4 --ra-ra-ra- topx topx topx topx 1 8:36:20 8:36:20
s 100 0x26de --ra-ra-ra- topx topx topx topx 8 10:19:34 8:28:14
s 99 0xc1c --ra-ra-ra- topx topx topx topx 1 8:36:20 8:28:14
s 98 0xbb8 --ra-ra-ra- topx topx topx topx 1 8:43:50 8:28:14
s 97 0xaf0 --ra-ra-ra- topx topx topx topx 500 8:36:20 8:28:14
s 96 0xa28 --ra-ra-ra- topx topx topx topx 500 8:36:20 8:28:14
s 95 0x7ee --ra-ra-ra- topx topx topx topx 1 8:36:20 8:28:14
s 94 0x7e4 --ra-ra-ra- topx topx topx topx 1001 8:36:20 8:28:14
s 93 0x7da --ra-ra-ra- topx topx topx topx 220 8:36:20 8:28:14
s 92 0x7d5 --ra-ra-ra- topx topx topx topx 200 12:05:15 8:28:14
s 91 0x7d0 --ra-ra-ra- topx topx topx topx 200 8:56:42 8:28:14
s 90 0xc80 --ra-ra-ra- topx topx topx topx 2 12:31:01 8:27:52 –a
Prstat
Code:
PID USERNAME SIZE RSS STATE PRI NICE TIME CPU PROCESS/NLWP
9202 topx 1460M 893M sleep 59 0 0:16:37 0.2% integrity_check/1
12455 root 3880K 3600K cpu65 59 0 0:00:00 0.0% prstat/1
9080 topx 142M 130M sleep 59 0 0:00:52 0.0% intf_resp_low/1
9125 topx 102M 78M sleep 59 0 0:00:36 0.0% interface_vsc/1
9121 topx 88M 80M sleep 59 0 0:00:32 0.0% interface_tcu/1
9120 topx 89M 80M sleep 59 0 0:00:29 0.0% interface_rcm/1
9124 topx 87M 78M sleep 59 0 0:00:29 0.0% baplie_merge_v2/1
9122 topx 86M 78M sleep 59 0 0:00:28 0.0% interface_eih/1
9115 topx 88M 77M sleep 59 0 0:00:33 0.0% intf_batch_even/1
9114 topx 88M 77M sleep 59 0 0:00:39 0.0% intf_event/1
9117 topx 87M 78M sleep 59 0 0:00:32 0.0% interface_bxy/1
9118 topx 86M 78M sleep 59 0 0:00:29 0.0% interface_ppm/1
NPROC USERNAME SWAP RSS MEMORY TIME CPU
41 topx 334M 2237M 3.4% 0:30:17 0.3%
43 root 186M 195M 0.3% 0:14:45 0.0%
1 noaccess 152M 136M 0.2% 0:04:00 0.0%
1 smmsp 3688K 11M 0.0% 0:00:04 0.0%
1 lp 1208K 3880K 0.0% 0:00:00 0.0%
6 daemon 7264K 9944K 0.0% 0:00:26 0.0%
Total: 93 processes, 259 lwps, load averages: 0.40, 0.39, 0.39
Prstat –mL
Code:
bash-3.00# prstat -mL
PID USERNAME USR SYS TRP TFL DFL LCK SLP LAT VCX ICX SCL SIG PROCESS/LWPID
9202 topx 0.9 0.0 0.0 0.0 0.0 0.0 99 0.0 2 0 5 0 integrity_ch/1
9080 topx 0.4 0.0 0.0 0.0 0.0 0.0 100 0.0 5 0 20 0 intf_resp_lo/1
9114 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 13 0 66 0 intf_event/1
17282 root 0.1 0.2 0.0 0.0 0.0 0.0 100 0.0 20 1 324 0 prstat/1
9117 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 1 70 0 interface_bx/1
9118 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 1 70 0 interface_pp/1
9115 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 15 0 80 0 intf_batch_e/1
9121 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 0 70 0 interface_tc/1
9125 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 0 70 0 interface_vs/1
9120 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 0 70 0 interface_rc/1
9123 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 0 70 0 interface_vs/1
9124 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 1 70 0 baplie_merge/1
9122 topx 0.1 0.0 0.0 0.0 0.0 0.0 100 0.0 8 0 56 0 interface_ei/1
9119 topx 0.1 0.0 0.0 0.0 0.0 0.0 100 0.0 8 0 56 0 interface_cp/1
9204 topx 0.1 0.0 0.0 0.0 0.0 0.0 100 0.0 15 1 1K 0 sys_check/1
259 root 0.0 0.0 0.0 0.0 0.0 0.0 100 0.0 13 2 98 7 in.mpathd/1
1 root 0.0 0.0 0.0 0.0 0.0 0.0 100 0.0 3 0 99 3 init/1
1337 noaccess 0.0 0.0 0.0 0.0 0.0 0.0 100 0.0 100 0 100 0 java/14
140 root 0.0 0.0 0.0 0.0 0.0 0.0 100 0.0 19 0 114 0 nscd/851
Total: 90 processes, 256 lwps, load averages: 0.40, 0.40, 0.39
Vmstat
Code:
bash-3.00# vmstat 1 10
kthr memory page disk faults cpu
r b w swap free re mf pi po fr de sr m0 m1 m2 m3 in sy cs us sy id
0 0 0 87720712 60562856 173 645 199 44 44 0 0 0 0 0 0 886 2819 525 0 1 99
1 0 0 87563976 59743040 73 327 0 15 15 0 0 0 0 0 0 747 2831 439 0 1 99
0 0 0 87563656 59742808 61 306 0 15 15 0 0 0 0 0 0 770 2684 427 0 1 99
1 0 0 87563656 59742824 0 0 0 0 0 0 0 0 0 0 0 886 1302 525 0 1 99
1 0 0 87563656 59742816 62 305 0 15 15 0 0 0 0 0 0 722 2652 420 3 1 96
1 0 0 87563656 59742840 554 2777 0 139 139 0 0 0 0 0 0 959 9736 749 1 1 97
0 0 0 87563456 59742672 1155 5735 0 292 292 0 0 0 0 0 0 1113 17489 1145 1 3 96
1 0 0 87563656 59742840 0 0 0 0 0 0 0 0 0 0 0 845 1613 654 0 1 99
0 0 0 87563656 59742856 62 305 0 15 15 0 0 0 0 0 0 900 2647 526 0 1 99
0 0 0 87563656 59742856 62 304 0 15 15 0 0 0 0 0 0 683 2661 396 0 1 99
Mpstat
Code:
CPU minf mjf xcal intr ithr csw icsw migr smtx srw syscl usr sys wt idl
0 0 0 130 261 1 121 0 13 1 0 0 0 1 0 99
1 0 0 35 133 2 143 0 9 6 0 64 0 0 0 100
2 0 0 5 20 2 17 0 3 0 0 29 1 0 0 99
3 0 0 0 3 0 2 0 0 0 0 0 0 0 0 100
4 0 0 3 14 0 15 0 2 2 0 13 0 0 0 100
73 0 0 474330 77 3 0 7 0 2 0 2596 67 33 0 0
73 0 0 487701 37 0 0 7 0 8 0 2670 66 34 0 0
73 0 0 476377 14 0 0 8 0 1 0 2610 66 34 0 0
78 0 0 473950 11 1 0 7 0 13 0 2593 67 33 0 0
78 0 0 480562 9 0 0 7 0 4 0 2630 66 34 0 0
79 0 0 320989 14 1 0 8 0 0 0 1766 77 23 0 0
79 0 0 479148 9 0 0 7 0 8 0 2622 66 34 0 0
79 0 0 479426 13 0 0 7 0 2 0 2622 67 33 0 0
79 0 0 488949 9 0 0 8 0 13 0 2678 66 34 0 0
64 0 0 482229 15 2 0 8 0 7 0 2638 65 35 0 0
77 0 0 475571 14 1 0 7 0 8 0 2602 67 33 0 0
69 0 0 467795 22 1 0 7 0 40 0 2563 66 34 0 0
69 0 0 318623 9 1 0 7 0 8 0 1751 77 23 0 0
66 0 0 465179 92 1 2 8 0 62 0 2545 66 34 0 0
When my application running, some of CPU have IDLE state = 0 and hold the CPU while another CPU have IDLE state 100. I think this is my bottleneck but I cannot find any solution for solve that.
Netstat
Code:
bash-3.00# netstat -i
Name Mtu Net/Dest Address Ipkts Ierrs Opkts Oerrs Collis Queue
lo0 8232 loopback localhost 244022 0 244022 0 0 0
nxge0 1500 TOPX-01-DUMMY1 TOPX-01-DUMMY1 3594863 0 5801650 0 0 0
nxge1 1500 TOPX-01-DUMMY2 TOPX-01-DUMMY2 160954 0 151230 0 0 0
iostat
Code:
bash-3.00# iostat -xn
extended device statistics
r/s w/s kr/s kw/s wait actv wsvc_t asvc_t %w %b device
0.1 0.1 1.5 30.8 0.0 0.0 1.8 9.0 0 0 md/d0
0.0 0.1 0.8 30.8 0.0 0.0 0.0 9.9 0 0 md/d1
0.0 0.1 0.8 30.8 0.0 0.0 0.0 9.8 0 0 md/d2
0.0 0.0 0.0 0.0 0.0 0.0 0.0 15.2 0 0 md/d3
0.0 0.0 0.0 0.0 0.0 0.0 0.0 10.9 0 0 md/d4
0.0 0.0 0.0 0.0 0.0 0.0 0.0 19.4 0 0 md/d5
0.0 0.0 2.2 1.5 0.0 0.0 0.8 7.4 0 0 md/d6
0.0 0.0 1.1 0.7 0.0 0.0 0.0 8.5 0 0 md/d7
0.0 0.0 1.1 0.8 0.0 0.0 0.0 8.2 0 0 md/d8
0.0 0.1 0.4 0.6 0.0 0.0 7.6 10.0 0 0 md/d9
0.0 0.1 0.2 0.6 0.0 0.0 0.0 9.1 0 0 md/d10
0.0 0.1 0.2 0.6 0.0 0.0 0.0 7.8 0 0 md/d11
0.0 0.0 0.0 0.0 0.0 0.0 0.1 10.4 0 0 md/d12
0.0 0.0 0.0 0.0 0.0 0.0 0.0 8.5 0 0 md/d13
0.0 0.0 0.0 0.0 0.0 0.0 0.0 8.4 0 0 md/d14
0.1 0.5 2.1 32.3 0.0 0.0 0.0 9.9 0 0 c0t0d0
0.1 0.5 2.1 32.3 0.0 0.0 0.0 9.8 0 0 c0t1d0
0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0 c1t0d0
0.9 0.9 125.3 123.1 0.0 0.1 0.0 34.2 0 2 c4t600144F0CC00C29A00004D1E456F0003d0
0.3 0.7 20.7 53.9 0.0 0.0 0.2 8.2 0 0 c4t600144F0CC00C29A00004D1E43880001d0
0.1 0.2 50.7 111.5 0.0 0.0 0.0 59.1 0 1 c4t600144F0CC00C29A00004D1E453E0002d0
Please help me find the bottleneck of my T5440 server?Thanks so much for all your help.Moderator Comment and Action:
@ O.P.,
You cross-posted this to at least two other forum web sites:
http://www.linuxquestions.org/questions/solaris-opensolaris-20/application-running-too-slow-on-sun-sparc-t5440-but-run-normal-on-sun-m3000-4175411155/
http://www.unix.com/solaris/189945-application-running-too-slow-sun-sparc-t5440-but-run-normal-sun-m3000.html
... and didn't think that was important enough to simply mention the fact.
Timestamps suggest that OTN was the last place you posted to.
Poor forum etiquette.
Why would anyone spend the time to try to give help that you have already received elsewhere? That's a waste of their time.
(Yes, you already received the suggestion to use Dtrace in one of those other sites.)
This thread is locked as irrelevant. -
Safari runs toooo SLOW after Time Warner took over from Adelphia cable
I have a Motorala cable modem SB5100 which with my previous Adelphia cable connection worked great. About 3 months ago, Time Warner took over Adelphia here in San Diego. Since that time, my commuter has been running sooo slow! I talked with the Time warner tech who suggests my modem may not be working. My question to you techies (which I am not) is it the modem which they are trying to get me to change (I own it) and rent theirs or is it my computer?? Could I have picked up a virus or have I done something to my computer which is slowing the internet use. It takes forever to access any site or turn a page. I find it hard to believe that my modem is the issue since it worked fine with Adelphia. TWC in fact uses the same modem as I have with other clients. Is there anything else I can do or run to see if it is the computuer versus the modem? Any help is greatly appreciated.
Thanks!!I have this same problem - but I do not understand the 'add a location' - do you add a city or state? I understand everything else -
I have Road Runner -
Please forgive if I have posted this in a wrong place - I am a 68 year old 'little ole lady' and not very computer saavy!
But I'm learning - Very slowly!
I have Roadrunner too.
This is what I did (subsequent to the referenced
thread)
Go to the System Preferences>Network panel
- Location - set up a personal location by clicking
on the drop down menu and selecting "add a location".
Use a name familiar to you. Once established,
select "apply".
Next, click on the "Show" drop down menu and select
Network Port Configurations. Only Ethernet (or
Airport) ought to be checked. Move it to the top of
the list (you can drag it). Select "apply".
Back to the "Show" menu, depending on your
connection select "Ethernet" or "Airport". Click on
the TCP panel. There enter 4.2.2.2 in the DNS
servers box and select "apply". Or, as an
alternative, follow the DNS suggestions outlined
here.
Personally, I have found the OpenDns codes to be most
effective for my system.
There is no virus affecting Macs.
Message was edited by: Hawaiian_Starman -
Why my Lightroom 5 runs so slow?
My Lightroom 5 was working correctly until last sunday. When I started it runs very slow and every work with pictures takes a lot of time. What happens?
Hi Brett,
I got the same issue and I am very frustrated about it.
Its the same thing I experienced in Lightroom 4 and its still not fixed. I cant use the book module because of that. So BLURB is not getting my money. :-(
I am waiting for that fix since more than a year, but Adobe says its a Problem which appears only for a small group of users.
HA HA just do a Google search!!!
System:
Lenovo W520
Win 7 64Bit
i7-2760 @ 2.4 GHz
20 GB Ram
1st HDD SSD 256GB --> Catalog
2nd HDD HGST 1.5TB -->Pictures
Nvidia Quadro 2000m -
After yosemite update, my wifi periodically runs very slow and sometimes disconnects
Hi there,
After the yosemite update my iMac's wifi has been running super slow, nothing to do with my own internet connection as it's fine, as other computers and devices works fine on the internet.
Recently the only way that I have fixed it is to turn my wifi off, and then turn it back on again, this fixes it for a short amount of time before I need to do it again.
Any suggestions?
this was a screenshot during the time that it was running slow, during the test it went down to about 0.02 mbps download, then spiked to 2.5mbps, causing the average of 0.19mbps.
Upload speed seemed average for my internet connection.Please look over and use Troubleshooting Wi-Fi
-
I tried to update the latest software update for my MacBook pro (which was on 10/12) and after it started to update it restarted like normal but when it started back up it was running painfully slow and none oft programs will open.They all quit unexpectedly. iTunes microsoft word all of them quit unexpectedly. Help!
Exact same problem with my 2010 MBP 2.4ghz 4gb ram 10.6.8. iTunes said update was needed, Software Update ran with various updates including a security update, truthfully didn't pay much attention, I always install the Apple updates. After the restart it took 3-4 times longer than normal to get to the login screen, same to get to the desktop but I'm familiar with that occurring on update restarts. Unfortunately it got worse from there. Performed a full shutdown and startup. Same long boot. After the desktop finally loads every mouse button press received a 2 minute beachball. I use menu-meters and both processors are under 10%. Waited a few minutes for disk utilities to launch, repair permissions estimates 3 hours for a typical <10 minute process. Activity monitor shows nothing over 10% CPU most of the time however ReportCrash pops to the top often. Any suggestions would be greatly appreciated. BTW zero problems until this update.
-
My MAC runs very slow. Rainbow wheel every time i try to go somewhere. Im a complete MAC novice. Only really use it for iTunes and email. the odd document here and there. The odd spreadsheet. Was brought up on a PC. I would imagine my system is in mess. I think i downloaded that Mackeeper which i have just discovered was not a good idea. I found a thread about EtreCheck and it suggested i posted the report of my machine which i have done.I only have 2GB of space. Not sure how much i have left. My wife keeps putting photos on here like they are going out of fashion. Bought the machine in 2008 because everybody said you have a MAC. I've never really got to grips with it but at least it worked. Now it does not run very well at all. That spinning wheel is driving me mad. HELP please, never ever used a forum light this either so please go gentle on me. Cheers Paul
EtreCheck version: 1.9.15 (52)
Report generated 8 September 2014 09:09:26 BST
Hardware Information: ?
iMac (20-inch, Early 2008) (Verified)
iMac - model: iMac8,1
1 2.66 GHz Intel Core 2 Duo CPU: 2 cores
2 GB RAM
Video Information: ?
ATI Radeon HD 2600 Pro - VRAM: 256 MB
iMac 1680 x 1050
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:31:45
Disk Information: ?
Hitachi HDP725032GLA380 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (117.84 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information: ?
Apple Inc. Built-in iSight
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Bose Corporation Bose USB Audio
Apple Computer, Inc. IR Receiver
Gatekeeper: ?
Mac App Store and identified developers
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[running] com.trusteer.rooks.rooksd.plist Support
[loaded] net.sourceforge.MonolingualHelper.plist Support
Launch Agents: ?
[running] com.trusteer.rapport.rapportd.plist Support
User Login Items: ?
iTunesHelper
Internet Plug-ins: ?
Google Earth Web Plug-in: Version: 5.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 Support
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
AmazonMP3DownloaderPlugin101749: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Outdated! Update
iPhotoPhotocast: Version: 7.0
QuickTime Plugin: Version: 7.7.3
eMusicRemote: Version: (null) Support
eMusic: Version: Unknown
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
Flip4Mac WMV Support
Trusteer Endpoint Protection Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
2% iTunes
2% WindowServer
0% coreaudiod
0% fontd
0% rapportd
Top Processes by Memory: ?
178 MB Finder
133 MB com.apple.WebKit.WebContent
109 MB iTunes
92 MB Safari
63 MB com.apple.quicklook.satellite
Virtual Memory Information: ?
24 MB Free RAM
821 MB Active RAM
807 MB Inactive RAM
291 MB Wired RAM
338 MB Page-ins
680 KB Page-outs1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Please help, my iMac is running slow and plenty of memory available?
Please help, my iMac is running slow and plenty of memory available? I tried reading some of these forums to see what to do, I have already deleted all of my downloads that were stored in the downloads file. Not sure what to do next, I ran the etrecheck and here is the following info from the scan:
EtreCheck version: 2.2 (132)
Report generated 4/20/15, 2:55 PM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Click the [Click to remove] links for help removing adware.
Hardware Information: ℹ️
iMac (27-inch, Mid 2011) (Technical Specifications)
iMac - model: iMac12,2
1 2.7 GHz Intel Core i5 CPU: 4-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
BANK 0/DIMM1
Empty
BANK 1/DIMM1
Empty
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6770M - VRAM: 512 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 5:29:18
Disk Information: ℹ️
ST31000528AS disk0 : (1 TB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 999.35 GB (872.44 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
OPTIARC DVD RW AD-5690H
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple, Inc. Keyboard Hub
Apple Inc. Apple Keyboard
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Internal Memory Card Reader
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Adware: ℹ️
Genieo, InstallMac Adware! [Click to remove]
More adware files Adware! [Click to remove]
Problem System Launch Agents: ℹ️
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.CallHistorySyncHelper.plist
[killed] com.apple.cloudd.plist
[killed] com.apple.cmfsyncagent.plist
[killed] com.apple.coreservices.appleid.authentication.plist
[killed] com.apple.EscrowSecurityAlert.plist
[killed] com.apple.gamed.plist
[killed] com.apple.icloud.fmfd.plist
[killed] com.apple.Maps.pushdaemon.plist
[killed] com.apple.nsurlsessiond.plist
[killed] com.apple.printtool.agent.plist
[killed] com.apple.scopedbookmarkagent.xpc.plist
[killed] com.apple.security.cloudkeychainproxy.plist
[killed] com.apple.spindump_agent.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
15 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.ctkd.plist
[killed] com.apple.icloud.findmydeviced.plist
[killed] com.apple.ifdreader.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.nsurlsessiond.plist
[killed] com.apple.spindump.plist
[killed] com.apple.wdhelper.plist
7 processes killed due to memory pressure
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[running] com.adobe.AdobeCreativeCloud.plist [Click for support]
[running] com.dced8a8837572b7b.agent.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[not loaded] com.dced8a8837572b7b.daemon.plist [Click for support]
[running] com.dced8a8837572b7b.helper.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[failed] com.citrixonline.GoToMeeting.G2MUpdate.plist [Click for support] [Click for details]
[loaded] com.genieo.completer.download.plist Adware! [Click to remove]
[loaded] com.genieo.completer.update.plist Adware! [Click to remove]
[running] com.google.Chrome.framework.plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[failed] com.webtools.update.agent.plist [Click for support] [Click for details]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
AdobeResourceSynchronizer Application (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
Dropbox Application (/Applications/Dropbox.app)
AdobeResourceSynchronizer Application Hidden (/Applications/Adobe Acrobat XI Pro/Adobe Acrobat Pro.app/Contents/Support/AdobeResourceSynchronizer.app)
Google Chrome Application Hidden (/Applications/Google Chrome.app)
Internet Plug-ins: ℹ️
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 3.0.0.85 BETA - SDK 10.7 [Click for support]
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
JavaAppletPlugin: Version: Java 8 Update 40 Check version
User internet Plug-ins: ℹ️
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
Google Earth Web Plug-in: Version: 7.1 [Click for support]
Safari Extensions: ℹ️
Omnibar Adware! [Click to remove]
MacMin
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Flip4Mac WMV [Click for support]
Java [Click for support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
3% AddressBookSourceSync
3% Google Chrome Helper(10)
3% Google Chrome
2% mdworker(5)
1% WindowServer
Top Processes by Memory: ℹ️
729 MB Google Chrome Helper(10)
481 MB kernel_task
119 MB Google Chrome
115 MB Mail
74 MB softwareupdated
Virtual Memory Information: ℹ️
58 MB Free RAM
3.94 GB Used RAM
218 MB Swap Used
Diagnostics Information: ℹ️
Apr 20, 2015, 09:21:25 AM Self test - passedSo I looked up the info on OWC as suggested and found the correct memory to upgrade but not sure how much to get and which option? I wanted to know how much space I have available to upgrade so I don't buy something that's more than what can be used. I'm not sure if I need 4GB or 8GB of ram? Also there are two options with every memory choice for instance:
8.0GB PC3-10600 1333MHZ SO Kit (4GB + 4GB) w/Lifetime Limited Warranty
Same Day
$78.79
8.0GB PC3-10600 SO-DIMM 204 Pin w/Lifetime Limited Warranty
Same Day
$82.79
Not sure what the difference is in the two and which I would need to purchase? Thank you for all your help! -
my new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help
my iphone4 is 10 times faster
i have backed up on itunes and restored but still no luck
even siri is laggingmy new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help
my iphone4 is 10 times faster
i have backed up on itunes and restored but still no luck
even siri is lagging
Maybe you are looking for
-
How do I see a book which has been downloaded, but does not show in Adobe Reader XI?
How do a find a ePub book in Adobe Reader XI, which has been downloaded and does not show up? janf76607913
-
How to make firefox the default search engine?
Somehow the generic internet was defaulted and I can't find how to reset it.
-
How do I disable autofilling in searches?
I hate autofilling in searches and as much as I tried, I couldn't disable it so any time I start typing in Google or YouTube or any other search it autofills with my recent searches and it is really annoying sometimes... Is there anyway to do that? T
-
Hi, We are currently installing EHP4 on ecc6.0 with oracle 10g and win2003 server(64 bit) We have downloaded all package from maintenance optimizer and also the XML file as mentioned in installation guide . After starting sapehpi installer we are get
-
How do i uninstall the recent software update?
I just updated to version 4.3 and does not work properly. Can I go back to the previous version?