[Help] - Wrong storage location in production order!

Hello SAP Gurus and friends,
I have a finish product with a BOM with only one Raw material. This Raw material is created for storage location 1001 and 1010, but in MRP2 view, I have defined "Prod. stor. location" and "Storage loc. for EP" 1010. When I create a production order for my finished product, system puts 1001 in the storage location of the component!!!
Can someone please help me with this?
Thanks in advance,
Adelmo Silva

Dear Adelmo Silva,
Storage loc. for EP" 1010
This setting is for External procurement materials
you can find another storage location which is above of storage location for EP, here check for stoarge location mainatined
or check in BOM item details, whether any storage location is defined
Regards
Madhu

Similar Messages

Storage Location in Production Order Component Overview

Hi All,
When creating a Production Order using CO0, the Component Overview will list out the corresponding BOM for the Finished Good. We have defined a number of plants and storage locations. I see here that the plant and storage location is automatically determined in the components overview. I would like to set defaults for these, may I ask where in SPRO is this configured?
Thanks in advance

Hello
Storage location in production order is pre-setting in bom component level/and MPR2 view,
First priority is Bom Component level, i will transfer Production order only this BOM if maintianed here.
second priorty is Material master date in MRP2 view, it will effected all components and all bom which used this components.
Benny

How do I maintain storage location for Planned Orders in APO

Dear all,
Can you help us in maintaining storage location for planned orders in APO. The storage location from material master need to be updated in product master of APO and the same shall be automatically picked from product master during Supply Network Planning run.
Material master CIF is live.
We have got the following content error in CIF consistency check. How ever this is nt goging to harm any thing, but we would like to maintain in both R/3 and APO.
Error:
Plant and storage location in SAP APO: 2004
Plant and storage location in SAP R/3: 2004 FGPA
Thanks in advance
Ram Mohan Rao Kolanupaka

Instead of maintaining additional master data, i would rather use CCR user exits to switch off comparison of planned order at storage location level if the APO storage location is blank. This way you would not have to make changes to PPMs everytime a new scale out of the solution happens.
In SE18 check the user exit /SAPAPO/CIF_DELTA3 (interface RELEVANT_FOR_COMPARE_ORDHEAD)
If it is not possible to switch off this comparison then I guess changing master data is the next step. Do explore with a developer though about the first option.

Storage Location at Sales Order level

Hi Experts,
I have an issue here. In our system, the storage location is determined at sales order level and for that a code is written in the exit MV45AFZZ.
In the normal sales order, the storage location is determined as expected but when the return sales order is created taking the reference from the original sales order, for one type of material the storage location in the return sales order is same as the reference sales order (as required) but for one other type of material the storage location in the sales order is not same as in the reference sales order but some other storage location.
Could you pls help in finding the possible reasons for the same.
Thanks,
Harsh Gupta.

so can that have some impact
As you may be aware through standard settings, storage location in sale order will not be fetched automatically and as you said above, with an exit, it is fetched into sale order. Hence, you need study that exit again as to why it is triggering a different plant when a return order is created.
thanks
G. Lakshmipathi

MD04 - filter out storage location or sales order stock

Hello,
we are using sales order stock in a specific storage location. Is it possible to filter it out of the stock/requirements-list (MD04). I saw filters in customizing but don't know what to select.
thanks

Hi David,
For the Transaction MD04 if SAP provides the Screen Exit this can be done.
Please check with your ABAPER wheather for this Transaction any Screen Exit is Existed
or not.If Existed we can do this if not cant do this.
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

Wrong ' valuation type' in production order - SAP AFS

Hi guru,
We have production orders for material AFS with Valuation
Category 'X'(automatic batch)and with split valuation.
During release of production order, the field 'valuation type' (AFPOD-
BWTAR) in folder ''Good receipt' is valuated with a wrong value.
In debugging we found the function /AFS/_LCOKO1F09 that in reading the
table MBEW the first value different from 'blank' fill the
fields 'c_bwtar' (value C), but the correct value is 'P'.
It seems some confusion among the value of field AFPOD-BWTAR and MBEW-
BWTAR because the help value (F4) on AFPD-BWTAR is different from help
value of MBEW-BWTAR.
So if you can help us.
Best regards

Hi
U v mention that u r using valuation category (X). Which is ment for automatic batch creation.
generally valuation is ment for origion of prod., quality lebels, etc.
If this is ur requirement then u can't use valuation category (X).
U need to create seperate valuation category based on parameters on which u want valuation.
Regards
Ashish

Auto fill the goods' storage location in sales order item

Hi,
I have a issue,When I use VA01 to create a sales order,I want to let the system auto fill the material storage location when I enter the material no. for the sales ITEM.
How to do?I want use the userexit to do,the program 'MV45ATZZ' but I couldn't find where I can add my code,Whether have other better way to do?
Thanks

Sorry,I use this user exit program 'MV45AFZZ'.
source code like below,
FORM USEREXIT_MOVE_FIELD_TO_VBAP.
VBAP-zzfield = xxxx-zzfield2.
*{   INSERT         KHDK900234                                        1
      If SVBAP-TABIX = 0.
     SELECT SINGLE LGORT FROM MARD INTO VBAP-LGORT
                          WHERE MATNR = VBAP-MATNR .
      endif.
*}   INSERT
ENDFORM.

New Document Series for different locations for Production Orders

Hi Experts,
I have came across a scenario where we have to setup different Document Series for Different Locations. Actually the Company is having 2 units . First one is the factory itself and the second one is Subcontracting Unit to which the company sends the job work order . But there it wishes to track the productions processes and the Stock tracking Warehouse Wise for
this Second unit also . As Such I have created 2 locations and one warehouse for (RM,SFG,FG) for both the units.
The obvious requirement here is to maintain different Document Series for Productions orders for both the units .
Please guide me about how to overcome this scenario.
Thanks and Regards,
Pooja Singh.

Hi Pooja,
Yes. You can maintain different document series for production Order or any documents depending upon your business scenario. Let's say, you need to maintain Production orderu2019s of job work and sub contracting.
You can define this under Administration>System Initialization> Document numbering.
Select Production orders--> let say Factory first number 1, last number 199999, select current period indicator and update. Similarly for the subcontracting, in the name field, "work order", first number as 110001 or the way you desire, and then the last number.
Reards,
Senthil Maruthappan.

Mandatory the Material Quantity and Storage Location Field in Order

Hi Expert,
Please advise. how can i set the Maintenance order,
If Material field is Filled
Then Mandatory the Quantity Field and Storage Location Field.
Thank You
Best Regards

Hello,
Please Use Below User Exits to get your Functionality
IWO10009 --->PM Order Check for 'Save' Event
CNEX0026--->general inspection of material
Regards,
Rakesh

New Storage location - Old Sales orders

Hi experts
We have created 2 new storage locations and moved materials into them. This has given us a problem regarding our sales orders where the item lines point to the old storage locating and not the new. Is there a smart way to change open sales orders so they point to the new location or do we only have the hard way, and do this manually for each open item line ?
Kind regaards
Jens B Olsen
SKOV A/S
Denmark

Try tcode MASS (object type: BUS2032) to update the Sloc in the sales orders.
Thanks
Swagat

Wrong settlement rule in production order

Hi All,
I have a material which is assigned with strategy 70 through MRP group. In the same MRP group, production order type "XXXX"
is specified for planned order conversion. And this MRP group with strategy 70 & production order type "XXXX" is assigned to material.
Production order type "XXXX" & is assined to settlement profile "YYYY" in OPJH Tcode. In settlement profile, material & WBS element are specfied as valid & optional receivers & default object type being "WBS element"
I have created a planned independent requirement of "VSFB" type which is having account assignment as "Q- Project" & is assigned to WBS element.
MRP run produces planned order in the individual WBS segment (i.e. planned order is WBS specific "MAKE TO PROJECT").
IF this is converted to production order, the order type used by the system is "XXXX" which as per the settings. But it should have 100 % WBS settlement rule which is not taken by that production order & it is taken as 100 % Material.
Can anybody explain me why this should happen?
Regards,
MHP

> I have a material which is assigned with strategy 70 through MRP group.
> I have created a planned independent requirement of "VSFB" type which is having account assignment as "Q- Project" & is assigned to WBS element.
> MRP run produces planned order in the individual WBS segment (i.e. planned order is WBS specific "MAKE TO PROJECT").
MHP,
Can you explain us as how you are creating a PIR with account assignment to Project? Is this a component used in a BOM or is this your final product?
Planning strategy 70 is basically for MTS, so I dont think it would work for you. I feel you need to work with planning strategy 85 or 83.
Regards,
Prasobh

Wrong routing selection in production order creation via MILL_OC

Hi,
We are using the order combination functionality (MILL_OC)
We have a product with alternative routings.
Situation is as follows:
- Create 2 plan orders for the same material
- Execute MILL_OC
When I execute the MILL_OC transaction I get the request to choose the routing. If I select routing with groupcounter 2 for both orders, the combined order is created with routing X /groupcounter 1.
I also tried using production versions but the situation remains
even by forcing to "use always production version" = setting in the material master, I still get routing 1.
It seems the combined order takes always the first routing, Any selection is not possible
Did I miss a setting/customizing or is it a bug?
Any help would be appriciated
Regards
Johan

Hi Ayoub,
All the 4 routings are valid from Oct.2014 to 31.12.9999.
The Order date is from Apr.2015.
I've made another test with 2 routings created with ECN and the order chose one without asking me what to choose. I don't know the criteria used in this functionallity.
Thanks,
Caio.

BAPI FOR STORAGE LOCATION

hi all
can anyone please help me out to find out the bapi that displays sto rage location details, that should give the output without taking any import parameter.
Note: make sure that the bapi should not take any import(input values) parameters.
regards
prasanna kumar

Hi Dude,
Go through this Link:[Re: To change storage location for production order;

Cancellation of production order

Gurus,
I have a scenario where i am issuing some raw materials from stores to the production order, after one operation i want to cancel the order and return the sfg to the stores after one operation. then i TECO the order and cancel it. Now i want to issue this sfg to another order as sfg how can i map this process so that the costs are also captured appropriatels according to material movements.
Thanks,
Ariel Desa

Hi Shahid,
1. Cancel Operation Confirmation: Go to CO13 enter order number press enter. In next screen select operation and click cancel and SAVE.
2. Return the Material : GO to MB1A enter Plant, mvt type as 262 press enter. Enter return material number, qty, batch (f there), storage location and production order number (old no) and press enter save.
3. Re Issue the Material: GO to MB1A enter Plant, mvt type as 261 press enter. Enter return material number, qty, batch (f there), storage location and production order number (new no) and press enter save.
Revert for further query.
Regards,
S.Babusingh

Stock in 3 storage location..

Hi Friends,
I have 3 storage location where I place stock. As you know that we have only one defualt storage location in Production Order. When system not able to find a stock at that storage location then it will create missing part list msg.
I would like system should pick the stock up automaticaly from another storage location, if stock in not available in default storage location.
I would appriciate, if you could write in steps to do config.
Thnks

Hi,
There may be requirement to withdraw the material from different stocks for goods issues and stock transfers based on some criteria or strategies. To meet this requirement in SAP we have stock determination strategies which determine how and when the material should be withdrawn, and from which storage locations and stocks. We can include the following stocks for the purpose of stock determination: unrestricted-use stock u2022 vendor consignment stock u2022 pipeline material u2022 sales order stock u2022 project stock.
Based on the stock determination strategy you define in configuration, the system makes decisions on material withdrawal depending on the material, plant.
Configuration
SPRO > Materials Management > Inventory management and Physical inventory > Stock determination
Define a stock determination strategy, according to which stocks should be reduced. Each strategy is determined at plant level based on a stock determination group and stock determination rule.
Assign a stock determination group to the material in the material master record.
Regards.

[Help] - Wrong storage location in production order!

Similar Messages

Maybe you are looking for