Help! WRT54G Firmware update in .bin format and cannot DL.

As in subject - the firmware DL for the v6 of the WRT54G on the website comes in a .bin and I can't open it. The 'help' section implies it should be a winzip file? What should I be using to open this file with? Thanks
A

You don't open it. You upload it from the Upgrade tab in the routers UI.

Similar Messages

Unable to open .eps file "unknown format and cannot be opened" ?

A client sent me an .eps file (logo). I tried opening it in Illustrator AND photoshop (just to see if it was saved in one vs the other program) - however to no avail.
Illustrator gives me a message "unknown format and cannot be opened"
Photoshop gives me a message "photoshop was unable to parse the postscript".
I'm using Adobe CS4, and I've never seen this message before—would love to know what this means and how to resolve?
File attached if anyone is able to open / fix it?
Thanks kindly,
Chemol

Thanks for the advice Scott - does compression improve the .eps? Is it
silly for me to ask them to compress it since the file is only 766 KB
(that's how big the attachment is in my email - though I am unable to open
it)?
My friend is able to open it on his end - however the 3rd person (client) is
the one who sent it, and I have already requested a different version - no
response from them yet. Unfortunately what the company "has" is what he
will likely give to me again (ie: same file / unable to open). So ... I am
curious about how I can resolve this issue on my end - if possible?
Do you know what the AI and Photoshop error messages mean? Could the issue
be a mac vs PC concern? Or is it a corrupt file? Could it be a software
version issue (old vs new) ... or Quark incompatibility?
.... just guessing at this point....Any insight as to what different
scenarios may apply in this situation would be greatly appreciated ..thank
you.

"E:\filename.ai" is in an unknown format and cannot be opened"

My computer crashed. I just re-installed Adobe Illustrator 10.03. Now some of my ".ai" files show funny looking icons and won't open and instead a pop-up that says "E:\filename.ai" is an unknown format and cannot be opened". Some of my documents are just fine. But there are several Illustrator docs in various spots on my hard drive that are giving me this error.
Any suggetions on how to get these files to open up?

OK. Now we're getting somewhere.
Without knowing more about the precise nature and cause of the "crash," we can only make guesses, and here's mine:
Basically, Katie, you're screwed.
My guess is that either the "crash" and/or your boss's subsequent handling of the D: drive (which might have been entirely proper) has caused data corruption on that drive.
If you have no backup for the files on the drive, and if those files are of critical importance, I would disconnect the drive immediately and get it to a data recovery specialist. The longer you have it connected, the more you reduce the chance of recovering data.
If the data are somewhat less than critical, you can try some basic recovery steps yourself. Start by making an image backup of the drive (to an external drive or removable media), then run chkdsk on it with the /r option. Rename any recovered files (with the .ai extension), and try opening them.
Finally, you might send the .ai files that won't open to a specialist who knows the Illustrator file format. He/she might be able to make some partial fixes that will, at least, enable you to open the files.
If you want, upload a few of the files to a server and post the link here. Some of the experts here might have a crack at it. (Put the files in a .zip archive first to protect them against further corruption during transfer.)

HT4623 I updated my iPhone 4s and cannot access Passbook. When I click on App Store, I get the following message "cannot connect to iTunes Store." How do I correct this?

I updated my iPhone 4s and cannot access Passbook. When I click on App Store, I get the following message: "cannot connect to iTunes Store." How do I correct this problem?

That's because there are not enough apps that use Passbook yet. Wait.

Error The File "Print.ai" is in an unkown format and cannot be opened adobe Ilustrator 5.5

I am getting an error The File "Print.ai" is in an unkown format and cannot be opened adobe Ilustrator 5.5 on Mac OX 10.10.2 but was also the same in Mac Mavericks. any thoughts?

d,
In addition to what Larry said, there is a number of levels you can try for general issues, described in the following list. 1) and 2) are the easy ones, 3) is the basic preference file (irreversible procedure), 4) is the whole preferences folder (reversible and more thorough, needed for some issues), 6) is the full ultimate solution, 5) can be skipped in this case.
The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media, see below. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save current artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible), for CS3 - CC you may find the folder here:
https://helpx.adobe.com/illustrator/kb/preference-file-location-illustrator.html
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall (ticking the box to delete the preferences), run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

HT5313 I have been trying for weeks to download update 10.7.5 and cannot do so. I do get a message at the end - "connection reset by peer". Can anyone shed any light on why I cannot download this update and what the message may mean? Thanks.

I have been trying for weeks to download update 10.7.5 and cannot do so. I do get a message at the end - "connection reset by peer". Can anyone shed any light on why I cannot download this update and what the message may mean? Thanks.

Take a look at this discussion and the ones listed under "more like this" in the right column:
https://discussions.apple.com/thread/4166820?start=0&tstart=0

I SERIOUSLY NEED HELP I CANT UPDATE MY iPOD NANO AND I JUST GOT IT!!!

I plug in my iPod rite, and then it starts to begin updating when this message comes up:
Songs on the iPod "Ma Nano" cannot be updated because all of the playlists selected for updating no longer exist.
What does that mean and how do i fix it????
Help please.

I have a Nano that is locked up and seems to have some logic to the problems.
I have tried the 5Rs
I have formatted and restored
I have the latest version of the firmware and software
This thing is a $250.00 nightmare it is 5 months old and now it is a software piece of junk does anyone now of any person that can troubleshoot and repair this device (in a reasonable amount of time?)
There is no doubt that I can send it back to Apple under warranty and they will remove the software bug and charge me $100.00 (plus shipping and handling) to solve there problem.

WRT54GS firmware update

Hi
I just updated my WRT54GS v2.1 from firmware v4.50.6 to v4.71.4 (yes, I'm not what they call the most careful network admin in my house), and I noticed 2 slight changes, I'd like you to confirm:
1) On Setup tab, Basic setup page, I remember from previous version what was specified on Router name would be shown on "Connect to 192.168.1.1" login window, e.g. "The server 192.168.1.1 in ROUTERNAME requires a user name and password". After firmware update , it shows WRT54GS, ignoring what's I specified in Router name field. Is it same to you?
2) On Status tab, Router page, it says "Current time: Not available". Help says "This shows the time, as you set on the Setup Tab". Setup tab only shows time zone setup though... I don't recall if it was available there in previous firmware version, but where is the clock adjust function?
Thank you!

After upgrading the firmware on the router, it is recommended that you should reset the router and reconfigure it. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait for 30 seconds. Power cycle the router and reconfigure it.
On the setup tab, you will find the Time settings.

Need help in firmware update !

Hai everyone,
Am new to this discussion. I've downloaded the latest N70 (code: 0539240) firmware update from the nokia official site. when i start running it, it shows starting application and stays like that for hours nearly 2hrs. I tryied running with the pc suite already installed but it gave the same result. Should i wait longer ....is this normal or is there something wrong with this software and why does this software need an internet connection for the update.
Any help wud be greatly appriciated !

i have same problem dude..
this problem starting from nsu version 1.3.7..
So, in version 1.3.6 there is no problem when running application
so, if it been so longgggggg after 5 min
goto
task manager>process tab & end process
1. nsl_host_process.exe
2. nsu_ui_client.exe
and running nsu again
sometimes when u run, nsu_ui_client.exe is not run too, so nsu will make so long to finish loading or will not end loading..

N97 Firmware updates but Ovi suite and SW update t...

I have updated my firmware to the version 11 twice now. Once using the Ovi suite and once using th PC Suite Software updater. When I go to the SW update app in my N97 it still says "Phone Software - Important" but the details just say it's the same firmware update I've already gotten. I'm thinking this may hinder my ability to get the new NGAGE, Maps, etc. updates. How do i fix this?
Thanks for the help!!

try this *#7780# default code is 12345 you will not lose any data, you will have to reset your settings possibly. and then turn the phone off for few minutes. turn in back on , go to the software update in the application folder and refresh the avaliable updates by going to options on the left hand side. see if this will help any
oh and btw you have updated your phone you can check this by *#0000# pluging this in if it is v11 you are good to go
Message Edited by radical24 on 15-Jul-2009 03:51 PM
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Home Hub 3 Firmware update stops DNS queries and m...

I am getting very poor service after 5 phones about my incident 1403**-******. The staff cannot understand my problem even though I have explained in clear technical detail. Basically a firmware update has caused my BT Home Hub 3 to have very slow management web interface and fails to handle DNS queries. It connects to the Internet Fine.
The Home Hub has been rebooted and reset many times and no improvement.
Help BT.

I have been DNS having problems with two Chromebooks accessing the internet ever since the latest firmware upgrade to my HH3 on 15 March - calls to BT went over their heads they just blamed it on the Chromebook as no other devices were having problems despite the fact that I made it clear that the problem only started after the latest upgrade - the muppet dealing with the problem even went as far as to say that BT does not support more than 6 devices connected to the hub at anyone time.
I found that the DNS problem does not affect you if you switch from the HH to BT FON even when you are on your own network.
I finaly got round the problem on the chromebooks by going into the settings page on the Chromebook, opening the HH3 settings and selecting the option to use 'Google name servers' from the 'Network' tab.
It has long been an issue for me that the HH3 does not allow me to set my own choice of DNS unless I subscribe to a Dynamic DNS provider from their list - I prefer to use Open DNS to control my network as it allows me to filter out content across the whole network but to do this I would need to replace the HH and that would mean I would lose the Vision service

Firmware update 7.2.1 and now airport extreem won't work

I did the firmware update for 7.2.1 the other day and ever since the airport extreme base station keeps resetting itself over and over again then I unplug it for a few hours and plug it back in and its ok for a while then it does it again. When it is doing this I cannot connect to it with the airport utility and when I finaly get connected I try to put the firmware for 7.1.1 back and it just sits at 0% forever.
I'd realy apreciate some help with this. I have guests here and none of us can get to the internet and its getting frustrating as heck!

did you try to reset your base?
This is helpful in some cases.
You will find instructions here:
http://docs.info.apple.com/article.html?artnum=107451
Please be patient.
Attention: Resetting your base will erase all of it's settings!
Joachim

HT1766 Please help! I updated myiPhone 4S today and it deleted all my contacts and text messages. I backed it up before the update and got all my pics out, but the phone did a new backup with blank version. How do I get my contacts and messages back?

I updated my 4s today and it completely reset and when it came back, my contacts and and messages were gone.
I tried to restore from my computer, but it won't bring back the contacts or texts????
Lost, please help!

Cool.
See the user tip Backup your iTunes for Windows library with SyncToy for a suggested backup regime.
tt2

Firmware update progress bar appears and computer won't start up

Hi,
I am on OS X 10.6 (the latest developer build, whose build number I can't remember and can't look up because my computer won't start up) and this morning when I tried to start up my computer, it chimed, the apple appeared but then a grey progress bar (like the one that appears during a firmware update) appeared at the bottom of the screen along with the customary spinner. This progress bar didn't update and after 10-ish seconds, it disappeared and left just the spinner. I left the computer in this state for 4 hours and nothing happened. It still starts up in single user mode (but I can't seem to get Open Firmware mode to load) and it starts Windows XP on another partition of my main HD.
When I start it in verbose mode, it says that my catalog B-tree has keys out of order and it is unable to repair them. Also, I get an error message from launchctl: "Bug: launchctl.c:2033 (23930):17: auditquickstart() == 0". Then later on it tells me to convert a few system plist files to launchd (all in the /etc/mach_init.d/ folder). The very last line says "launch_msg(): Socket is not connected".
I would rather not re-install the system, but if I have to, I guess I will. I appreciate any light that anyone can shed on this problem.
Thanks,
Kyle

Yes, they (the third-party utilities) both come on bootable DVD's. As I mentioned, since Snow Leopard was just released in its final version, the developers may be in the process of releasing updates.
Your situation is likely to be a case where the data corruption issue already existed before installing Snow Leopard, and the installation process made the problem more apparent (because something critical was installed where it was affected by the data issue).
It is a good idea to run +Repair Disk+ in Disk Utility on the startup volume before installing a major system update. Actually, I do it before any system-level update.
You should also have a backup (at least of your personal data if not the entire volume), in case something bad happens during a major system upgrade. If you were using Time Machine, the easiest recovery would be to reformat the internal drive and use the Time Machine complete volume restore utility to restore the volume back to the date/time state just before you installed Snow Leopard. Then, after restarting from that restored volume to make sure everything is working, start up from the Snow Leopard installation disc, run Disk Utility and use +Repair Disk+ (just to be sure), and run the upgrade to Snow Leopard again.
If you have a backup of at least your personal data, you may want to reformat the internal drive, install Snow Leopard and bundled apps, install your third-party apps from their original sources, update everything that needs updating, and restore your personal data.
If you don't have a backup, the best bet is to try either DiskWarrior or TechTool Pro. DiskWarrior is very specialized into repairing this type of data problem. TechTool Pro has similar capability, but it is a more general tool with other features.

Help with Firmware Update... Doesn't recognize built-in isight

Hi,
I just installed the firmware update and now the computer will not recognize the built in isight (in ichat preferences it says there's no camera attached and when you launch photobooth it says there's no camera attahced). Anyone have any ideas? Since the firmware update was successfully installed I'm not sure if'how I can back out of it and if so what to do next...
Thanks!
Michael

I just applied the firmware update and had the same problem. So I restarted and all is well. Photo Booth recognizes the iSight and iMovie does as well. Did you try restarting after the iSight wasn't recognized?
Eric S.
iMac 2.0Ghz Core Duo, 1.5GB RAM, 250GB HD Mac OS X (10.4.8) G4 DA 533MHz DP w/Giga dual 1.8GHz upgrade, 1.5GB RAM, Radeon 9600 Pro 256MB

Help! WRT54G Firmware update in .bin format and cannot DL.

Similar Messages

Maybe you are looking for