Help: WRT54GL v1.1 keeps loosing my isp settings

Hello,
Having trouble right out of the box with the above mentioned router with the latest firmware 4.3.12:
I can setup my settings ok - isp with DHCP + MAC clone and get the internet (wired and wireless) to work fine
but once very often the router gets stuck loosing the ISP IP,DNS,gateway, etc. (the wireless connection between the router and my PC remains fine but with no internet)
I tried with wired connection and it is the same and extra behaviour: the lan keeps getting the X mark (connection lost) every 2 minutes for short periods of time lkne 1 second
the reset button wont help (pressed for 5 sec), only when i power down the router and back on it gets the ISP settings  and works again for a while.
the MTU is AUTO (1500) but is just fine for my ISP (ping yahoo.com -l -f 1472)
any ideeas ?
tks a lot !

You should hard reset your router -
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link

Similar Messages

  • Help with new build, keeps freezing on stock settings

    Ok, here is my build:
    AMD phenom II X4 965 125w
    MSI 790GX-G65 Mobo
    4gb corsair XMS3 2x2gb 1600mhz DDR3
    ATI Radeon 1gb 5970
    1TB caviar black
    Ok so here goes:
    I ordered all of the above parts, and proceeded to build the computer.  It would boot fine, but than went to install windows 7 and it would always freeze before the install screen even came up.
    I tried everything, but bought another CPU and Motherboard.  Same problem.
    I don't even have the video card plugged into the board, so that can't be the problem
    I did a memtest86 and found no errors.
    Now, if I underclock the CPU to 2.0ghz it's stable as a rock..  But anything above 2.2ghz and it starts getting unstable.
    Help please?  I have upgraded BIOS to 4.1
    All settings are on Auto
    Let me know which direction to go?  I am about to switch to a different brand motherboard all together.
    Thanks so much for any help anyone gives me! 

    This is the one I always use on my highend builds
    http://www.newegg.com/Product/Product.aspx?Item=N82E16817139009&nm_mc=OTC-Froogle&cm_mmc=OTC-Froogle-_-Power+Supplies-_-Corsair-_-17139009

  • Firefox's Tools Options popup Window's Exceptions Boxes keep loosing my requested settings each time I reboot this PC... Running with OS Win XP Home Ed., HP Compaq desktop.. Can someone point me in the right direction??? in English

    Firefox>Tools>Options>Content>Block Popups>Exceptions, have added websites URL's, checked "Allow", then Closed. After rebooting PC [3 separate times, to check out what was happening] find this same box, each time after reboot, with NO DATA in it. Same problem also happens with Content>Load Images>Exceptions and Privacy>Accept Cookies>Exceptions...
    It acts as tho there is a "SAVE" button I am failing to clickon!!!

    Hi,
    You may have to disable '''Site Preferences''' in '''Tools''' ('''Alt''' + '''T''') > '''Options''' > '''Privacy''' > '''Settings'''..., if it is enabled (ticked).
    [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Privacy%20panel?as=u Privacy Panel]
    https://www.mozilla.org/en-US/firefox/new/

  • WRT54GL power led keep flashing, hard reset doesn't help. router is dead?

    Just got my new WRT54GL. It worked very well for couple hours, and then I can't connect to it any more, wireless or wired.
    Tried hard reset and follow instructions from here, it didn't help, power led still keeps flashing. I can't ping 192.168.1.1 or tftp to it.
    So Router can be announced dead? I know it most likely be the flash bios issue, but what can I do with it?
    Thanks!

    Unplug the power cable for 1 minute..... plug back the power & see if it is solid or not ....
    If not lower down the Ethernet card speed from Auto to 10 half duplex or 10 Mbps ..... reset the router for 40-50 seconds .....  check the Ip address ...try to ping the gateway address if getting reply open routers set up page & upgrade the firmware of router ........
    If not getting valid Ip address use static Ip address 192.168.1.50 ...subnet mask 255.255.255.0 .... & gateway 192.168.1.1
    Again try to open the setup page ..........

  • HELP  --  KEEP LOOSING PICTURES  -- after loading show up w/ question mark

    Anyone ??!!
    I have worked on this document for over 100 hours and made several saves in between, but keep loosing pictures all the time?
    Lay-out stays OK, but the locations for many of the pics are indicated with gray squares and question marks!!
    Is Pages unable to handle Larger docs with many pics? (I have already split into 2 docs of 27 pages, but problem remains)
    PLEASE ANYONE?

    Hello Robert,
    your documents are really huge. Are the files so big or are they so manyfold? If you have the possibility (with Preview or better with Photoshop/Gimp/Seashore) you should save the images with as low size as possible. Do you want to print the portfolio or it is for screen presentation only?
    To see if there is a problem with Pages or with the images, you should have a look inside the docuemnt package folder. To do so, do a control-click onto the document icon and choose "Show Package Contents" from the appearing menu. In the new Finder window you can see all the files your Pages document contains. If you can find the images there about which Pages wrote it is missing, try to open some of them in am image editor to see if they are broken.
    If you can open them, they are okay. I think the images are made with an digital camera. Of what resolution are the images? If you need the portfolio for screen purposes only, you can calculate them down to 92dpi and a proper pixel count (for smaller display ca. 800 to 600 pixel and for larger display ca. 1280 x 960 pixel). This depends on your own likeness. I only want to give you a guess.

  • HT201250 WE KEEP LOOSING THE WIFI CONNECTION WHILE STREAMING TO VIDIO-HELP

    Why do i keep loosing the wifi connection while streaming to vidio- help

    Did you ever find a resolutution to your issue? I have a similar issue after installing Mavericks where the Arris modem goes to sleep when my iMac does, even though other devices on the network are actively requesting data. For the time being, as long as the iMac doesn't sleep the network is fine.

  • My i phone 4  keeps loosing its connection with my Toyota Camry bluetooth-- anyone have any ideas why?

    My i phone 4  keeps loosing its connection with my Toyota Camry bluethoth   does anyone know what I can do about that?

    Ignore the ridiculous post by W1$C.  He posts that regardless of the person's question.
    Things you can do to solve your problem:
    1.  General>Settings>Reset Network settings
    2.  If this is only happening at home, power down your router for a minute, then power it back up.
    3.  Other basic troubleshooting steps outlined in the user guide are to restart, reset, and restore--first from backup, then if needed as a new device.
    Hope this helps.
    GDG

  • This photo stream is no lingered shared. I keep loosing t my photos?, This photo stream is no lingered shared. I keep loosing t my photos?

    I keep loosing my shared photos get the message "this photo stream is no longer shared". Why!!

    I have an iPhone 4S and iPad 2. They both have latest iOS 6.1.3. Operating system.
    Fault. When I have down loaded shared photos. After a few minutes I loose all the photos. When try to re-install the photos. I get this message.  "The photo stream is no longer shared". 
    I haven't deleted any accounts r changed any settings.
    Hoe this helps and hope you can help!
    Macca

  • I keep loosing my printerc4795 in my network. I have rerun disc but now it won't take. 4th time this

    I have a c4795 all in one printer. It has just now lost the wireless again. This is the 4th time in the last 4 months. I have taken the program out of my sys and rerun the disc. Now it wont take and keeps going thru a error report that doesnt get anywhere. Help!!!!! Why do I keep loosing it??????

    What operating system?  How is it connected?  If to a router what brand/model?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Nexus keeps loosing connection, any ideas???

    Just got my Nexus yesterday but it keeps loosing data connection, wifi does the same. Help!

    Hi,
    If this is to the AIM server and you are using the SSL option try it without the SSL option ticked.
    8:30 PM      Tuesday; November 8, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Keep loosing keyboard connection

    I keep loosing keyboard and somtimes trackpad connection. The light on the keyboard flashes then it connects again. Any ideas. My imac is a 3.06Ghz Core 2 Due running 10.9.1.
    Whether its connected or not but occasionally the mac will freeze when in Safari and the only way to start again is to power off. These problems dont happen together and when the keyboard looses connection, the trackpad still works.
    Most confusing any help will be much appreciated.

    Hi there Rudyumd,
    You may find the troubleshooting steps in the article below helpful.
    Troubleshooting wireless mouse and keyboard issues
    http://support.apple.com/kb/ts3048
    -Griff W. 

  • Modem strong AExt is solid green keep loosing int. signal???

    keep loosing internet connection.  ISP says modem is strong.  Have solid green light on AExtr.  happens frequently.  changed modem/A Ext cable brand new still loosing connection.  could Airport Extreme unit be faultering???  please advise.

    I assume your Airport Express is cabled directly to a cable or DSL modem? In that case, if the status light is flashing yellow it mean only ONE thing - your Airport Express is having trouble connecting to your internet service provider. It does NOT have anything to do with interference.
    When this happens - how do you get it working again? Does it just randomly start working again? Or have you never been able to get it working again?

  • I keep loosing internet connection

    When I bought my MAC desktop MAC Lion OS X 10,7,5 it was working fine when connected to internet but now I keep loosing the connection.  I have to turn off  wifi off on to reconnect. It happens often.  Very annoying.  Can somebody help?

    Check thru thsi, you may have to change channels, as there may be some interference on the one your are on.
    http://support.apple.com/kb/DL1483

  • Airport express keeps loosing connection to Time Capsule

    For several years I have had no issue with mt Airport Express staying connected to my Time Capsule/router. Now 2 of my Airport Expresses keep loosing the connection and flashing yellow. I have done the resets where I press in the little button on the bottom while plugging the AE back into the power source and reconnecting through Airport Utility and that will do the trick but after a short time the flashing yellow lights will go back on.
    Would it help to turn off the router, rest all the AEs? It is so frustrating to keep loosing the connection and nothing else has changed; e.g. the AEs are all in the same place. 

    Same thing here! I didnt have the problem with airport express until I update the os from 10.6.2 to 10.6.6. I have been calling the apple support and they couldnt help (or thou sounded like they knew for that particular problem). I got from my work MacBookPro and same thing happen. I hope that apple will read this and just want to tell them that this is my 10 computer made by apple and God knows the last one! First of all they made the the fireware with the bad chipsets so I have to but extra cards and then airport. I cant connect at all to any wifi and have to put the cables on the floor from the wifi router to the ethernet input which is more than 10 metres. Apple sort this asap!!!!!!!!!!

  • HT2712 imac 10.7.4 keeps loosing wifi connection

    imac 10.7.4 keeps loosing Wifi connection

    Use the 5GHz connection as per page 6 on the following topic:
    https://discussions.apple.com/message/18374179#18374179
    Hope this helps.

Maybe you are looking for

  • Windows Vista Home + 4gb Nano... No go

    So far, I have experienced nothing but grief... I have tried just about everything i could find, and nothing has seemed to work so far... The problem seems to be that Vista does not recognize what the nano is. That is to say, it shows a connection, b

  • Item text and note not transfering to PR which is in ECC from SRM 5.0

    Hi, We are in SRM 5.0/ECC 6.0 We have a requirement to transfer Item text and item note (Item Text/note to be printed on PR(T Code ME53n)) to ECC PR. From SRM 5.0 These Item note and Item text is available in PR->Iteam->Service->service text and line

  • RFQ and PO Print

    Hi How to take print our for RFQ and PO. I know the t codes for both. Wat are all the back ground seetings required both? Explain in details Vijay

  • Font too large when printing an incoming email

    I want to change the font size when printing out mail in my inbox.  The email font size is small and OK, but when I print the email, it's too large.  How to I change this?

  • IPhone 6 plus shows cellular usage out of box

    I got my iPhone 6 Plus delivered and it shows 12 hours 20 Minutes of cellular usage out of the box. I checked with an Apple representative and they say it might be tested and hence the hours. Any ideas? Should I return and get another one?