Help-WRV200-QuckVPN not working

I am trying to connect to WRV200 in my test ENV before setting it up in my customer's office. The router is behind my office router. I've created my VPN login in WRV 200 then I've moved my comp to my office network (were WRV200 is as another client with some IP. I've started QiuckVPN, created the login and stared it. And then...
For first 30 it showed information about cheking polisy or something, then it seemed to connect, but started to "Verify the network". And this was shown for several minutes, the it said that router is not responding and I will by disconnected, but the again verifying the network and agan..,
Now way to stop tyhe process, now way to shut it down, what is is?
Do I realy need to use task manager to resolve problems with Linksys software?
Does anybode knows how to fix it?Message Edited by Tadeusz on 10-12-200612:59 PM
Message Edited by Tadeusz on 10-12-200601:08 PM

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

Similar Messages

Help viewer does not work after update to 10.4.4

Since updating to 10.4.4 my Help viewer does not work, and all of the troubleshooting fixes suggested in other threads have not had any success in resolving this. I've noted that when I go to Users>Library>Documentation>Help there is no mac.help file - can someone tell me if that means that I've lost the file altogether and need to reinstall it? I get to the first screen of the viewer, but the links from there don't work. Thanks for any help that you can provide!

Thanks for your suggestion. I downloaded OnyX and ran the cleaning function. After restarting, I opened Help and once again the first screen appeared fine. But again most of the links did not work, though those under the "What's New" heading did work. I might add that I had previously tried a variety of suggestions posted in another thread, which included deleting from the caches folder in Home>Library several files such as com.apple.helpui and help.plist in the Preferences folder. (As noted in my previous post this evening, I also created another user but that also did not have any effect.) Any other ideas? Thanks

Help button is not working in Infoview

Hi All ,
I am working on BO XI R2 environment and help button is not working properly in my infoview.
I can get help files from Admin console but the same is not true with infoview.I got two different server installations, one of them its working fine but not for the other.
I checked for help files in IIS and they are there , even I verified web.config file as well for infoview and it also seems to be correct.
Please advice what could be the reason.
Thanks,
Vivek.

CLOSED

F4 help key does not work in ESS on ITS in Portal

Hello All,
F4 help key is not working in all iviews in ESS in Portal.When i try to press it nothing happens and no pop up appears,kindly please suggest wt might be the cause of this error? Iam tired struggling with this issue and not able to trace out reason for the same.My Email Id is [email protected] .Plz revert at earliest.
regards,
Saumya

Hi,
This kind of problem is known when webgui is being started from an IAC, e.g. HRWPC_FC_EXEC
You have to set parameter ~webgui_popups 1 in the service file of this IAC.
BR,
Disha.
Pls reward points for helpful answers.

In P6 P6 Help link is not working

Hi,
My P6 help link is not working in help menu.
P6 Library and Support link are working.
As suggested in another discussion i tried to update link in Admin>Application setting and restarted weblogic, But system is still taking some other link than i defined in application setting.
Can anybody help?

Hi,
We worked on this issue ,
Solution:
In the P6 EPPM Admin application in the corresponding configuration, In P6 Help url we have modified the url from http://hostname:8203/p6help/help to http://hostname:8203/p6help/ and we restarted the P6 server in weblogic console.
Then everything fine now,
Regards
Kumar

PLz help 7key is not working suddenli in my N-73

PLz help 7key is not working suddenli in my N-73 and the 7 is simply displaying on the screen help plz....
Birla

Ok.
It sounds as if something is keeping the key pressed, and that can be down to 2 reasons.
The phone has got wet and the internal key is corroded and fused, making a constant connection
or
Dust or dirt in under that key and are having the same affect
Either one of these reasons will need to be fixed at a Nokia Care Point as it will involve taking the phone apart.
You can find the nearest NCP to you at the Store Locator
Use the drop down list on the right to find your country.
If it is either of these faults, the NCP will probably charge you as it wont be a warranty fault, but a customer created fault.
Hope this helps.
My posts are my opinion and in no way the direct views of Nokia.
If my posts are helpful, please give me some KUDOS using the green star on the left.

Help front camera not working on my sons iPod touch 5g

Help front camera not working on my sons iPod touch 5g

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

My Help Viewer is not working for mac help

My Help viewer is not working for mac help. Everytime i choose mac help the window opens then closes. But when i open another help like safari help it opens and works fine. If i switch it back to mac help the window just closes and the application quits.
If you know how to fix please telll!

noname212,
Using "Search Discussions" with the term "Help Viewer" you will lead you to numerous posts which refer to Troubleshooting Help Viewer by Dr. Smoke.
Good Luck
;~)

Just updated my laptop to itunes 10.5,the help feature does not work.also updated my ipad2 3g wifi 64gig to ios5, now none of my purchased apps are working?? please help?

I JUST UPDATED MY ITUNES TO ITUNES10.5 ON MY LAPTOP(WIN7)
THE HELP FEATURE DOES NOT WORK.
I ALSO UPDATED MY IPAD2 3G WIFI 64GIG TO IOS5 AND NOW NONE OF MY PURCHASED APPS WORK??????????

I have seen this before. You need to update the apps in your app store, and once they are updated, they will work again.

Need help text_io function not working in 11i

Hi,
I am new in form devlopment Kindly help
We create a customize form on 6i then deploye it on our Oracle apps Server with EBS. I want to create a form using form 6i which read a text file from client side and insert data into table i try text_io function but its not working after deployed form on server and also try webutil function but its not working with oracle forms 6i kindly help how can i do this while using forms 6i i will be very thankful.
Thanks

Hi;
Please check first below link
Forms 6i Developer and Forms 6i Services - Demonstrations and Sample Code
http://www.oracle.com/technology/sample_code/products/forms/6idemos.html
Also check below googling which exists for step by step guide
www.pdfoo.com/result-Oracle-forms-6i-step-by-step-tutorial.html
www.pdfoo.com/resultpage9~forms-6i-step-by-step-application-development -examples.html
Also see:
http://www.google.com.tr/#hl=tr&biw=1259&bih=793&q=forms+6i%2Bstep+by+step&aq=f&aqi=&aql=&oq=&gs_rfai=&fp=71a534c4a5161590
Regard
Helios

HELP - BBM does not work on Playbook (Bridged)

Hi Folks,
Looked into other threads but all problems seem to be related to older versions.
I am new to the whole Blackberry Lifestyle.
Currently own, Playbook (wireless) and Torch 9860 for about two weeks - enjoying them independently.
ANY HELP would be appreciated.
Just tried the Bridge function but the BBM does not work.
It is funny cause my Playbook does get a notification for any BBM I receive, the remote works, the contacts can be seen on playbook but when I click on BBM notification it I get a message "Your Version of Blackberry Messenger is not compatible with Blackberry Bridge. Download the latest version of BBM to use it on your playbook.
I did what I normally do - googled it. Found out the specs and I do have all updated apps.
On my 9860 I have
7.1.0 System
Bridge 2.0.0.35
BBM 6.1.0.55
This is not linked to BES or anything - purely personal.
I have already restarted my phone and playbook with no luck.
I am new, so not sure of the difference between stuff like hard set, shutdown etc etc or other technical terms - so would appreciate if you assume that I am a complete dummy.

Hi playbookfun and welcome to the BlackBerry Support Community Forums!
Have you tried updating to the latest version of BBM™? If not, I would recommend trying that by going to www.blackbery.com/bbm from your BlackBerry® Browser.
Thanks.
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

F1 Help Perfomance Assistant not working - ITS SAP GUI HTML

Hi All,
when using a Transaction in SAP Portal i like to use the F1 Help. Transaction is displayed by ITS SAP GUI HTML. I have the option to display the Help in:
- Modal Window <-- this works
- Performance Assistant <-- not working
When pressing F1 an error message appears saying: "Expression_not_Num" while using the perfomance assistant.
- Is there a configuration missing? Is something not installed?
- Can i change the default personalization setting for help for all users to modal window?
Any ideas?
Regards
M. Stanka

Hi Michael Stanka ,
i got same issue from last week onwards.. If press F1 ,it displays like "Page cant be displayed". I searched in forums also but i couldnt get clear point. U posted ur issue was resolved.. Could u plz provide the steps how to solve?? My mobile no:09566855978(India-Chennai)

Help - Simple mask not working in Flash CS4

Hi everyone,
Thanks for taking a minute to read my post.
I am creating a very simple mask using motion tweening. I created some text on a layer and made it a masked layer. Then I created a mask layer which consists of a circle that will span across the text. When I play the movie the circle does not show up at all in the frames the mask layer spans (it's purple on a black background) and the circle does not move across the text like I told it to with the motion tweening. I don't know why it's not working. For some reason the circle isn't showing on the stage at all and it's not moving across the text. I don't know if I have it set up wrong on the timeline or what. Here's the steps I followed to create the mask:
1.insert a new layer in which I named it mask and click frame 1 on this layer
2. select the oval tools on the tools panel and set the stroke to none
3. set the fill color to purple
4. draw a circle and click the selection tool and drag a marquee around the circle to select it.
5. click insert on the menu bar, click motion tween then click ok in dialog box about converting it to a symbol to be tweened
6. click the last frame in the mask layer and drag the circle to the end of the line of text
7.click mask on the timeline to select the mask layer, click modify on the menu bar, point to timeline then click layer properties
8. verify the show check box is selected in the name section, click the lock check box to select it, click the mask option button in he type section, then click ok.
9. play the movie in which the circle object covers the text on the masked layer as it moves across the stage
Thanks for your help!
ashmic19

Update 8-2-10: In play mode the text was still visible when it shouldn't be but once I tested the movie the mask worked correctly with the text. So problem solved
-ashmic19
Thanks for all who viewed this. I finally figured out why it wasn't working. I had the mask layer locked. But now the circle is moving across the text but the text is viewable when it shouldn't be until the circle moves across it. How come it's doing this?
ashmic19
Message was edited by: ashmic19
Message was edited by: ashmic19

Help! Javascript not working when object moved from one page to another!

Hello all:
I am new to Adobe Livecycle Designer (version 8.0). I have created a 3 page interactive pdf form with numerous objects (text fields, radio buttons, drop-down boxes, etc.), that our business wants to begin using soon.
I am having difficulty with some of my Javascript not working with a few of my objects on page 2 of the form. Specifically, there is a drop-down box for "Country" on page 2 of my form. When the user selects, for example, "United States" from the list, I have Javascript that is supposed to change the "Currency" drop-down box rawValue to "US Dollars" accordingly (upon the change event).
I think my Javascript syntax is proper, but I am not certain. Here is my simple Javascript associated with the "Country" drop-down box (Note: rawValue 80 = "United States" and rawValue 105 = "US Dollars"):
form1.Page1.cmbContactInfoCountry::change: - (JavaScript, client) -
if (this.rawValue == 80) {
     cmbCurrency.rawValue = 105;
This seems pretty straight forward and it WORKS when my "Country" drop-down box is moved to page 1 of the form, but it WILL NOT WORK when I move the "Country" drop-down box back to page 2 of the form (which is where it belongs).
Does anyone have any suggestions or solutions? I have spent probably 6-8 hours racking my brain trying to figure out why it works when on one page, but it does not work when move to a different page. I am guessing that I may have corrupted something OR that I am not fully addressing the proper name of the object?
Please help!
Frustrated and helpless near Chicago!
Taylor T

Hi Jono:
Thank you for your quick reply.I was able to obtain the full name of the cmbCurrency object using the method you taught me. That is brilliant! Great short-cut tool.
Unfortunately, I am still having issues with getting Javasript for the cmbCountry object to work with the cmbCurrency object. I haved pasted my new Javascript below.
JavaScript for cmbCountry object:
//UNITED STATES
if (this.rawValue == 1) {
          xfa.resolveNode("form1.#subform[1].cmbCurrency").rawValue = 1;
else
//CANADA
if (this.rawValue == 2) {
          xfa.resolveNode("form1.#subform[1].cmbCurrency").rawValue = 2;
I have checked the "Specify Item Values" checkbox of the cmbCurrency drop-down object and Value 1 = "US Dollars" and Value 2 = "Canadian Dollars".
When I select "Canada" from the cmbCountry drop-down object, the rawValue of the cmbCurrency drop-down object is changed to "US Dollars" (when it is clearly defined as "Canadian Dollars"). When I select "United States" from the cmbCountry drop-down object, the rawValue of the cmbCurrency drop-down object stays blank for uknown reasons. Very strange.
Since I am not able to further explain in detail on what I am experiencing, I have posted a link to my file below (I just signed up for an account at ShareFile). I would forever be indebted to you if you can help me figure this out!
https://thomptk.sharefile.com/?cmd=d&id=07ede2fe11db4549

Please Help! iPod not working!

Please someone help me out, I really need my iPod tomorrow morning and its not working. When I plug into my Mac to sync it makes this creaky sound, i think its from the hard drive then my iTunes just freezes...Please Help!

If you or a friend has access to a PC, give a try to CopyTrans Doctor http://www.copytrans.net/doctor.php
It should fix your iPod up and then you can go on using it with your Mac.

Help-WRV200-QuckVPN not working

Similar Messages

Maybe you are looking for