HELP! X61 Tablet Bluetooth and intern mic with Windows 7 RC
Hello,
I have currently installed Windows 7 on my X 61 Tablet, model 7767 BFG. I can say it works much better than Vista. Only prob is that my Bluetooth hardware cannot be used anymore (it is not detected). Does anyone has an actual driver for this hardware? Do I have to set up any settings?
Also my intern mic does not work correctly. It is installed and detected as High Definition Audio but the mic sound input is too weak to use it for Skype etc. I tried to push up the input level up to 30 db. Does not work. Has anyone an advice?
Thank you in advance.
Bye.
It appears your MacBook is not compatible with 64 bit Windows. Perhaps you would have better luck with the supported 32 bit version of Windows.
These Mac computers can use 64-bit editions of Windows Vista:
MacBook Pro (13-inch, Mid 2009)
MacBook Pro (15-inch, Early 2008) and later
MacBook Pro (17-inch, Early 2008) and later
Mac Pro (Early 2008) and later
http://support.apple.com/kb/HT1846
Similar Messages
-
My MacBook Pro is running slowly. I run Mountain Lion on it. I received the following report from Etrecheck. Can someone help me decipher it and provide me with steps to fix the slow speed?
Problem description:
slow computer
EtreCheck version: 2.0.11 (98)
Report generated November 15, 2014 2:57:16 PM EST
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,1
1 2.3 GHz Intel Core i7 CPU: 4-core
4 GB RAM
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 - VRAM: 384 MB
NVIDIA GeForce GT 650M - VRAM: 512 MB
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.8.5 (12F45) - Uptime: 6 days 7:45:47
Disk Information: ℹ️
TOSHIBA MK5065GSXF disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
disk0s1 (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (25.67 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GS31N
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Rowmote Helper.app
[loaded] com.regularrateandrhythm.driver.RowmoteIREmu (1.0 - SDK 10.8) Support
/System/Library/Extensions
[not loaded] com.smarttech.iokit.SMARTBoard (11) Support
[not loaded] com.tectona.driver.PL2303 (1.3.0) Support
[loaded] com.webroot.driver.WebrootSecureAnywhere (54 - SDK 10.7) Support
Problem System Launch Agents: ℹ️
[failed] com.apple.accountsd.plist
[failed] com.apple.AirPlayUIAgent.plist
[failed] com.apple.coreservices.appleid.authentication.plist
[failed] com.apple.lookupd.plist
[failed] com.apple.printtool.agent.plist
[failed] com.apple.scopedbookmarkagent.xpc.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.coresymbolicationd.plist
[failed] com.apple.wdhelper.plist
Launch Agents: ℹ️
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.smarttech.boardservice.plist Support
[running] com.smarttech.floatingtools.plist Support
[running] com.smarttech.ink.plist Support
[running] com.smarttech.SBWDKService.plist Support
[running] com.smarttech.smartnotification.plist Support
[running] com.smarttech.systemtrayicon.plist Support
[running] com.webroot.WRMacApp.plist Support
[running] com.webroot.WRMacBackNSync.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[running] com.regularrateandrhythm.rowmotehelperaide.plist Support
[running] com.webroot.security.mac.plist Support
[running] com.webroot.webfilter.mac.plist Support
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist Support
[running] com.spotify.webhelper.plist Support
User Login Items: ℹ️
Garmin Express Service UNKNOWN (missing value)
iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Application (/Applications/Dropbox.app)
Spotify Application (/Applications/Spotify.app)
Google Chrome ApplicationHidden (/Applications/Google Chrome.app)
Rowmote Helper Application (/Applications/Rowmote Helper.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 Support
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
npwebroot: Version: 2.0.15 Support
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 Support
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.1
SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
Unity Web Player: Version: UnityPlayer version 4.5.1f3 - SDK 10.6 Support
Silverlight: Version: 5.1.20513.0 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 51 Check version
Safari Extensions: ℹ️
Password Manager
webfilter
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
Java Support
SMART Board Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
3% WindowServer
2% iPhoto
2% mds
2% mdworker
1% Google Chrome
Top Processes by Memory: ℹ️
382 MB Mail
275 MB WebProcess
107 MB Google Chrome
103 MB WindowServer
99 MB Google Chrome Helper
Virtual Memory Information: ℹ️
270 MB Free RAM
1.50 GB Active RAM
1.30 GB Inactive RAM
1.22 GB Wired RAM
20.97 GB Page-ins
8.64 GB Page-outsHi Linc
I hope this is what you were after. Looking forward to hearing your feedback.
Thanks, Susanna.
11/16/14 12:36:02.738 PM com.apple.XType.FontHelper[91728]: FontHelper: message received. (<dictionary: 0x7fbb9b606ce0> { count = 2, contents =
"query" => <string: 0x7fbb9b605720> { length = 109, contents = "com_apple_ats_name_postscript == "Roboto-Regular" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
"restricted" => <bool: 0x7fff7912f320>: true
11/16/14 12:36:02.738 PM com.apple.XType.FontHelper[91728]: AutoActivation: scopes (
"/Library/Application Support/Apple/Fonts"
11/16/14 12:36:02.878 PM com.apple.XType.FontHelper[91728]: FontHelper: message received. (<dictionary: 0x7fbb9a41d950> { count = 2, contents =
"query" => <string: 0x7fbb9a41d2e0> { length = 108, contents = "com_apple_ats_name_postscript == "Roboto-Medium" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
"restricted" => <bool: 0x7fff7912f320>: true
11/16/14 12:36:02.878 PM com.apple.XType.FontHelper[91728]: AutoActivation: scopes (
"/Library/Application Support/Apple/Fonts"
11/16/14 12:36:02.889 PM com.apple.XType.FontHelper[91728]: FontHelper: message received. (<dictionary: 0x7fbb9b102580> { count = 2, contents =
"query" => <string: 0x7fbb9b100580> { length = 107, contents = "com_apple_ats_name_postscript == "Roboto-Light" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
"restricted" => <bool: 0x7fff7912f320>: true
11/16/14 12:36:02.889 PM com.apple.XType.FontHelper[91728]: AutoActivation: scopes (
"/Library/Application Support/Apple/Fonts"
11/16/14 12:36:02.898 PM com.apple.XType.FontHelper[91728]: FontHelper: message received. (<dictionary: 0x7fbb9a41d1d0> { count = 2, contents =
"query" => <string: 0x7fbb9a41d2e0> { length = 106, contents = "com_apple_ats_name_postscript == "Roboto-Bold" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
"restricted" => <bool: 0x7fff7912f320>: true
11/16/14 12:36:02.898 PM com.apple.XType.FontHelper[91728]: AutoActivation: scopes (
"/Library/Application Support/Apple/Fonts"
11/16/14 12:36:03.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91723 [cfprefsd]
11/16/14 12:36:03.784 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91721]) Exited: Killed: 9
11/16/14 12:36:03.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91721 [SleepServicesD]
11/16/14 12:36:08.471 PM com.apple.launchd.peruser.501[159]: (com.apple.tccd[91730]) Exited: Killed: 9
11/16/14 12:36:08.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91730 [tccd]
11/16/14 12:36:09.592 PM com.apple.launchd[1]: (com.apple.xpcd.F5010000-0000-0000-0000-000000000000[91727]) Exited: Killed: 9
11/16/14 12:36:09.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91727 [xpcd]
11/16/14 12:36:13.129 PM com.apple.launchd[1]: (com.apple.XType.FontHelper[91728]) Exited: Killed: 9
11/16/14 12:36:13.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91728 [XType.FontHelper]
11/16/14 12:36:14.996 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91739]) Exited: Killed: 9
11/16/14 12:36:14.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91739 [SleepServicesD]
11/16/14 12:36:20.120 PM com.apple.launchd[1]: (com.apple.cfprefsd.xpc.daemon[76618]) Exited: Killed: 9
11/16/14 12:36:20.000 PM kernel[0]: memorystatus_thread: idle exiting pid 76618 [cfprefsd]
11/16/14 12:36:23.433 PM com.apple.launchd.peruser.501[159]: (com.apple.cfprefsd.xpc.agent[76616]) Exited: Killed: 9
11/16/14 12:36:23.000 PM kernel[0]: memorystatus_thread: idle exiting pid 76616 [cfprefsd]
11/16/14 12:36:26.261 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91752]) Exited: Killed: 9
11/16/14 12:36:26.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91752 [SleepServicesD]
11/16/14 12:36:37.691 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91764]) Exited: Killed: 9
11/16/14 12:36:38.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91764 [SleepServicesD]
11/16/14 12:36:48.938 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91777]) Exited: Killed: 9
11/16/14 12:36:49.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91777 [SleepServicesD]
11/16/14 12:37:01.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91788 [SleepServicesD]
11/16/14 12:37:00.821 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91788]) Exited: Killed: 9
11/16/14 12:37:04.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91706 [distnoted]
11/16/14 12:37:15.656 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91795]) Exited: Killed: 9
11/16/14 12:37:15.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91795 [SleepServicesD]
11/16/14 12:37:27.016 PM ReportCrash[91819]: Failed to create CSSymbolicatorRef for Webroot SecureAnywhere[264]
11/16/14 12:37:27.125 PM ReportCrash[91819]: Failed to create dSYM-less CSSymbolicatorRef for Webroot SecureAnywhere[264]
11/16/14 12:37:27.487 PM com.apple.launchd.peruser.501[159]: (com.webroot.WRMacApp[264]) Job appears to have crashed: Segmentation fault: 11
11/16/14 12:37:30.336 PM com.apple.launchd[1]: (WSDaemon[61]) Exited abnormally: Broken pipe: 13
11/16/14 12:37:34.295 PM WindowServer[79]: CGXDisableUpdate: UI updates were forcibly disabled by application "iPhoto" for over 1.00 seconds. Server has re-enabled them.
11/16/14 12:37:34.594 PM WindowServer[79]: reenable_update_for_connection: UI updates were finally reenabled by application "iPhoto" after 1.30 seconds (server forcibly re-enabled them after 1.00 seconds)
11/16/14 12:37:37.648 PM ReportCrash[91819]: Saved crash report for Webroot SecureAnywhere[264] version 8.0.7.78 (8.0.7.78) to /Users/landerson/Library/Logs/DiagnosticReports/Webroot SecureAnywhere_2014-11-16-123737_lukes-MacBook-Pro.crash
11/16/14 12:37:42.660 PM WindowServer[79]: CGXDisableUpdate: UI updates were forcibly disabled by application "iPhoto" for over 1.00 seconds. Server has re-enabled them.
11/16/14 12:37:43.632 PM WindowServer[79]: reenable_update_for_connection: UI updates were finally reenabled by application "iPhoto" after 1.97 seconds (server forcibly re-enabled them after 1.00 seconds)
11/16/14 12:37:50.783 PM WSDaemon[91822]: CGSRegisterConnectionNotifyProc called with invalid connection
11/16/14 12:38:09.909 PM Problem Reporter[91853]: launch_msg returned m -
Windows 8 Pro configure Bluetooth GPS to work with Windows 8 internal maps programs
How do you setup/configure a bluetooth GPS to work with windows 8 internal map programs. So far i,ve been able to connect the GPS device to the tablet, but it only works with Microsoft legacy map programs using the COM ports ie 3,7.
Hi,
The devices used in Windows Store Apps must have special drivers insintalled.
See the following document.
http://msdn.microsoft.com/en-us/library/windows/hardware/hh454840(v=vs.85).aspx
Juke Chou
TechNet Community Support -
I have a iPhone 5C and a PC with Windows Vista.I did pair my phone thru Bluetooth but when I try to connect I get this message:"error establishing connection" What is the reason of this?
Go into Settings>Messages>Send and Receive and make sure that your phone number is checked and iMessage reads as activated. Remove the checkmark from the email address and make sure that only the phone number if checked. It should appear grayed out, but should still have a checkmark. If the phone number does not have a checkmark, then turn off iMessage, wait a few moments and then turn iMessage back on and make sure that it activates.
-
How to authorise more than one machine (1 tablet Android and one PC running Windows XP Pro) with the same Adobe ID ?
Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
-Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
-Windows or Mac does not matter... 2 on the same operating system, or 1 on each -
Need help getting Adobe OnLocation CS3 to work with windows 7 64 bit. Any ideas?
Need help getting Adobe OnLocation CS3 to work with windows 7 64 bit. The program installed ok and the S/N took.
The program does record video and audio HDV M2T.
The problem is video doesn't display or play back on the monitor component @ 16:9 or 720 p. 4:3....
The scopes respond as do the audio components when recording. (with a blank monitor component).
The video does play back on my system no problem.
Any ideas?
DanMoving the discussion to OnLocation
Thanks,
Atul Saini -
X-Fi XtremeMusic and SPDIF bypass with Windows 7
Hello
I moved from Windows Vista to Windows 7 (64 Bit) now I wanted to use the SPDIF bypass option with the Digital I/O Module again, but in the "SPDIF E/A" tab the drop down box "Settings for SPDIF input" is disabled.
What I need to do to get the SPDIF bypass to work again?
(I don't need any Dobly/DTS decoding - it's just a simple?PCM signal.)
Best regards and thanks in advance
AndreasRe: X-Fi XtremeMusic and SPDIF bypass with Windows 7l Hello hwoarang5,
why do you think that this is disabled in Windows 7 and Vista?
It worked fine in Windows Vista, too.
Anyway, I've searched yesterday evening?a little bit more and solved the problem myself. To enable SPDIF bypass you have to do the following:
. enable Digital Input in the Windows 7 sound settings (it'sis disabled by default and I forgot about it).
2. change the FlexiJack mode in the audio settings of Creative to "Digital E/A".
3. now enable the "Recordation with bit adjustment" (don't know how this is called exactly in the English version).
When there is a PCM (DTS and Dolby is not supported) signal now at the Digital Input you should here something now.
Hope this helps somebody.
Best regards
Andreas -
Can i use a thunderbolt display for my macbook pro and hp laptop with windows 7 and what adapters will i need
Hi jayhrab,
Currently, the system requirements listed for an Apple Thunderbolt Display are:
Thunderbolt-enabled Mac computer, including MacBook Air, MacBook Pro, Mac mini, and iMac
OS X v10.6.8 or later
Apple - Thunderbolt Display - Read the tech specs.
Regards,
- Brenden -
My desktop IMac OSX 10.6.8 : IMovie '11: Trying to upload a home movie clip from my Panosonic camera model PV-DV203D. I've had this camera several years, and used it with Windows desktop. Now trying to work with my Mac. I have a USB cable, both ends fit, but iMovie '11 does not recognize it. Is there a driver fix for this?
What kind of Mac to you have? This camera is a tape based DV one that connects best with firewire and I cannot tell if your Mac has firewire. If your mac *does* have firewire, get a camcorder firewire cable and try again.
ETA: Oops, I am pretty sure that all the "desktop iMacs" have firewire, so you should be good to go. You will probably need a cord that goes from FW800 to your camcorder. -
Are Photoshop CS5 and CS6 compatible with Windows 8
Are Photoshop CS5 and CS6 compatible with Windows 8?
Yes, I'm running CS6 on 8.1, and I'm sure CS5 works as well.
-
Can I upgrade to maverick, and still working with windows partitions without any problem?
I have a MacBook Pro runing Mac Os 10.6.8, and a partition runing windows 7, I want to Upgrade to Maverick.
Can I upgrade to maverick, and still working with windows partitions without any problem?yeah I installed win7 64bit pro on lion and have since upgraded osx to mtn lion and then mavericks
and the windows partition to win8 and then win8.1 never done a reinstall of anything -
I need help getting my Thunderbolt display to work with Windows 7 through Bootcamp.
I recently bought a thunderbolt display and it works great in my Mac environment. But I recently added Bootcamp and Windows 7 (I need since my Broker Dealer only uses Internet Explorer). Unfortunately, I can't seem to get Windows to recognize my Thunderbolt display. Today, I spent 2 hours with a very kind advisor from Apple Support but we didn't have any success.
Here's my setup:
MacBook Pro (purchased new in 2011) with i7 processor
Thunderbolt Display
Lion OS (all updates installed)
Bootcamp with Windows 7 Ultimate 64-bit (all updates installed)
With the help of Apple Support, I downloaded and reinstalled (through the repair option) all the Bootcamp drivers. I shut down my computer, plugged in the Thunderbolt display, turned it on and booted into Windows 7. When the Windows Welcome screen appears, it shows on my Thunderbolt display for about 2-3 seconds. But the thunderbolt quickly goes black. My MacBook Pro changes to a 640x480 resolution and the Thunderbolt remains blacked out--with no signs of even a single flicker. Once the computer finishes the start-up, my MacBook Pro remains in a 640x480 resolution, with no option to change the resolution (it's grayed out in Windows control panel). If I unplug the Thunderbolt cable from my MacBook pro, the high resolution of my MacBook pro snaps back to normal.
To me, this seems like some type of driver problem but I must be missing something simple because it appears that Thunderbolt works with Bootcamp and Windows 7--based on some of the readings I've found here in the Apple support community. I'm most appreciative of anyone's help here.Moving the discussion to OnLocation
Thanks,
Atul Saini -
How to change startup disk for a 2012 Mac mini with dual HDD and clean installed with Windows 8.1?
Hi,
I have a Mac-mini (late 2012 model), originally with Mac OS X Maverick Server installed (with two HDD). Recently, I had clean installed Windows 8.1 on one of the HDD (worked perfectly, just slow) and swapped the other HDD (with Mac OSX) with a SSD. I then cloned the Windows OS HDD in to the new SSD. Now I am trying to boot this Mac mini from this SSD, however, since this Mac mini do not have BIOS for me to change the boot sequence at the startup, is there any one can help?
Thank you,
LiuscIf you boot with the Option key depressed what boot options are shown?
Also:
Restart your computer
After Windows is installed, you can switch between OS X and Windows. Use the Startup Disk preference pane in OS X, or the Boot Camp system tray item in Windows to select your startup disk, then restart your computer
How to install Windows using Boot Camp - Apple Support -
Bad PBR sig and dual booting with Windows
This site's menu config is too difficult for me...
fyi.
=>
Below is the cases that happened in my environment
when installing Solaris 8 Operating Environment, Intel Platform Edition
Some will help you, and some may be just for your thinking.
Bad PBR sig
You know what it means?
I don't know.
If you know, let me know please...
@ Case 1
My Seagate ST39236LW 9.2GB HARD DISK fdisk info
Total disk size is 14342 cylinders
Cylinder size is 1251 (512 byte) blocks
Partition Status Type Start End Length %
========= ====== ============ ===== === ====== ===
1 IFS:NTFS 0 7165 7166 50
2 Active x86 boot 7166 7182 17 0
3 Solaris 7183 14341 7159 50
(I use cylinder number to partition hard disk. Why?
When I use % and insert 1% to partition 2 then
fdisk makes start cylinder 7155.
It overlays with partition 1's end cylinder number.
So fdisk save(menu no 4) fails...
because the partition 1's start cylinder number is 0 ?)
After rebooting, bizarre Bad PBR sig, and my system dies...
So I boots my PC with Windows(or Dos) booting diskette.
A> fdisk
First Hard Disk partition info
1 NTFS 4377 50%
2 NON-DOS 10 0%
3 A NON-DOS 10 0% <= Solaris created x86 boot
4 NON-DOS 4363 0%
Solaris created extra X86 boot partition 3 and made it active.
But partition 3 could not boot...
I made partition 2 active from dos fdisk menu,
and pc boots well.
After rebooting, my disk partition info is like this
Total disk size is 14342 cylinders
Cylinder size is 1251 (512 byte) blocks
Partition Status Type Start End Length %
========= ====== ============ ===== === ====== ===
1 IFS:NTFS 0 7165 7166 50
2 Active x86 boot 7166 7182 17 0
3 x86 boot 7183 7199 17 0
4 Solaris 7200 14341 7142 50
Then after installation?
Partition Status Type Start End Length %
========= ====== ============ ===== === ====== ===
1 IFS:NTFS 0 7165 7166 50
2 Active x86 boot 7165 7181 17 0
3 Solaris 7200 14341 7142 50
Partition 2 and 3 changed...
Where did partition 3 go???
Just deleted?
Then why partition 2 Start cylinder changed?
@ Case 2.
Another queer thing....
Total disk size is 14342 cylinders
Cylinder size is 1251 (512 byte) blocks
Partition Status Type Start End Length %
========= ====== ============ ===== === ====== ===
1 IFS:NTFS 0 7165 7166 50
2 Active Solaris 7166 14341 7176 50
In Solaris x86 format fdisk menu,
if I've allocated remaining disk space all to Solaris(without x86 boot),
then Solaris also makes x86 boot partition(size 10MB), reboots well.
But install fails due to not enough free disk space
when install begins slicing Solaris partition.
error log says
Installing 32 Bit Solaris Packages
- Configuring boot device
- Using disk(c0t0d0) for "rootdisk"
- Deleting x86 boot fdisk partition (c0t0d0)
- Creating x86 boot fdisk partition (c0t0d0)
ERROR:Not enough free space to create x86 Boot fdisk partition(c0t0d0)
Why does Solaris delete and create x86 boot partition?
Why did it exist?
Case 3.
If I've fdisked like this, what will happen???
Total disk size is 14342 cylinders
Cylinder size is 1251 (512 byte) blocks
Partition Status Type Start End Length %
========= ====== ============ ===== === ====== ===
1BAD PBR SIG message comes from your BIOS - no partition boot record.
Sorry but it's not clear what else is going on - might be worth running a ODS based fdisk to clear the disk before installing Solaris? -
PIXMA330 and new computer with Windows 8.1. Error Code 2,148,0 when trying to scan
I have a PIXMA330 and bought new computer with Windows 8.1. I get error code 2,148,0 when trying to scan. I tried to download updated driver but still have the problem. Is this common? Thank you.
You may have a BIOS problem, but there are no drivers for the BIOS. The BIOS is the system firmware. You will have to go to the support website of the computer/motherboard manufacturer to look for a BIOS update as Windows has nothing to do with
the BIOS - that is the sole responsibility of the computer/motherboard manufacturer.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”
Maybe you are looking for
-
How do I see all options in the Inspector?
How do I see all options in the Inspector? I have gone to Preferences and checked Show Advanced Options. I am also selecting a clip in the Project window. But when I pull up my Inspector, I only have options to change the background color or the Dura
-
Hello Sir, I am Developing One Report In ALV, But I want One Column Of ALV Should Be In Checkboxes .How Can I set Check Box In Field Catalog. Plz Help Me.
-
I copied my Domain onto my laptop and wanted to upload parts of that site onto a new MobileMe account. I deleted all of the other files and tried to upload. I already set up a dedicated User Account with all of the Mobile Me info. Gallery is working
-
Key Command for "Bold" / Helvetica Neue is "Bold Cndenced"...
As the title reads...with Helvetica Neue the command "shift+command+b" is set to bold in my preferences....but with this fond it changes it to condensed bold...as I've read this might be implanted into the font itself......anyone have some ideas how
-
Urgent: New database with restored tape backup - step by step
Hi Oracle: 9.2.0.6 OS: AIX 5 There is an old full cold database backup on the TAPE drive which includes spfile and control files etc. I have been asked to restore this database to a new server (AIX 5). I am a new dba with less hands on restore/recove