Help! Yoga 8 - how to remove page?

Can anyone teach me how to remove extra page from the Yoga-8 launcher?
before 4.4.2, I can remove a page by holding the page -> display the pages, then click on the X sign on the page to delete the page;
but now I couldn't see that X, so no way to remove the page.
Can any one using Yoga-8 with 4.4.2 help me on this?
Any help is appreciated! but PLEASE...don't waste your time if you are not using 4.4.2, I know how to remove the page with 4.2.2.

Hi,
Just open the workset from the portal catalogue.
Select the particular workset.
As soon as u select it the delete button will be enabled.Just delete it.
Refresh the portal or logoff and login again
Regards,
Tamil K

Similar Messages

Plz help me how i remove previous id that is stuck in activation process and me not know password and id plzzzz help m,

plz help me how i remove previous id that is stuck in activation process and me not know password and id plzzzz help m

Read this: http://support.apple.com/kb/PH13695
If it is locked with your ID, then re-set the password at https://iforgot.apple.com

I had a very bad experience with apple maps. It is not at all useful. How such application is developed by apple I dont undersatand. Pl help me how to remove it from my Iphone. Vijay from Hyderabad. India

I had a very bad experience with apple maps. It is not at all useful. How such application is developed by apple I dont undersatand. Pl help me how to remove it from my Iphone. Vijay from Hyderabad. India

Tell Apple.
http://www.apple.com/feedback/iphone.html

HELP! How to remove Yahoo search from firefox 36.0.1? HELP!

I guess I made a big mistake upgrading to FireFox 36.0.1! Nothing but grief since trying to remove the Yahoo search from this version.
Didn't appreciate this version removing my default Home page tabs to use on startup. Looks like they are gone forever - not happy!
I have tried many if not all forms of advice to remove this yahoo search from my home page to no avail. I even uninstalled it and made sure I got a non Yahoo version from the Mozilla site. Still no help.
1) I have tried changing keyword.URL via about:config - no help
2) I have tried changing the Search - Change Search Settings - no help
3) I tried bringing up a single tab with Google and using General options to Use Current Page - no help
4) I tried the same using many other tabs without Google - no help
5) I have removed Yahoo and others from the Search options - no help
6) Uninstalled and reinstalled a "CLEAN" version from Mozilla site - no help
7) Retried 1 thru 5 above again - no help
8) Checked the Shortcut Target in Mozilla FireFox Properties - no help
Get the idea? No matter what, Yahoo comes back every time I open FireFox. Which means I cannot use a set of tabs as my default any more. WHY????
Looks like it may be time to severe my long time use of this browser since the beginning with NetScape in the earliest of days with PC's. Too Bad.

This worked. The problem is the user.js file was changed. See below:
User.js file overriding preferences
If you don't have any of the above programs installed, or if you followed the suggestions and single preferences still aren't being saved, you may have to edit Firefox's configuration files yourself. Don't panic, it's pretty easy. Here's how to do it.
Open your profile folder:
Click the menu button New Fx Menu , click help Help-29 and select Troubleshooting Information. The Troubleshooting Information tab will open.
Under the Application Basics section, click on Show Folder. A window with your profile files will open.
Note: If you are unable to open or use Firefox, follow the instructions in Finding your profile without opening Firefox.
Click the menu button New Fx Menu and then click Exit Close 29
Open the file user.js with a text editor (like Notepad).
If there is no user.js file, these steps won't help you.
Remove the lines for the options you want to be able to change. You can delete all the lines if you want to be able to change everything.
Save the file and close the text editor.
You should now be able to change your Firefox settings.

Some help please: how to remove incompatible audio units?

Hello forum readers,
If someone knows, a little help would be appreciated:
When staring Logic Pro X, each time Audio Units are automatically being scanned. All the time I get a window with the message "Incompatible Audio Units found":
"While verifying Audio Unit compatibility, Logic Pro X encountered 1 Audio Unit plug-in(s) which did not pass the Apple AU validation. These plug-ins have been excluded from further usage in Logic Pro X to prevent possible problems or crashes. You can start the AU Manager now to review the validation results or continue the startup process."
When opening the Audio Units manager, I see that "AUSpeechSynthesis (Automap)applttsp" (Manufacturer: Apple, type: generator) couldn't be opened. I don't know how to remove or bypass this plug-in, as the option "disable failed audio units" doesn't seem to work. Now each time I start Logic Pro X, the same message keeps appearing. I also can't find that file on my Mac, a searched for it and also the Finder can't find it.
Does anyone know how to solve this? Thanks a lot in advance!
Kind regards,
Thijs

I have the same problem but I can´t figure out how to unwrap AUSpeechSynthesis. I can´t even find it in the filesystem with spotlight..... ;o(
And yes I have turned on the 64bit plugin friendly option in Automap's Preferences.
Thanks for your help!

Hi, I need help on how to remove my credit card data on my friend's iPad?

Hi, my friend borrowed my credit card to purchase smart office 2. I need help on how to change or remove my credit card details on her iPad. It turned out when I tried purchasing a game that i was again automatically charged. Thanks for helping me.

Settings->iTunes and App Stores->Apple ID->View Apple ID->Payment Information, Set the Payment Type to "None".

How to remove page in the workset

Hi all,
Currently, I have removed an old page from the workset which has a Delta track to the workset to a Role in the Content Administration tab.
However, the role still able to view the old page.
How to remove unwanted page in the workset which is allocated to a role properly?
Can advise?
Thank you.

Hi,
Just open the workset from the portal catalogue.
Select the particular workset.
As soon as u select it the delete button will be enabled.Just delete it.
Refresh the portal or logoff and login again
Regards,
Tamil K

How do Remove Pages 5.0?

How do I remove 5.0 from my iMac and going back to 4.3 as 5.0 is so horrible?
I have real work to get done and it's like testing some non-APPLE Beta product.
I have a friend buying a new Mac. Can they just buy an older version of iWorks?

Thanks for the advise.
I used a free app called AppCleaner to remove all connected files.
I have now removed Pages 5.0 and now I'm getting my work done.
I really tried for hours on 5.0 and it just was just too difficult for me.

Help on how to remove case on iPhone 6 Plus

Hello, I bought the "Barely There" case from Case Mate for my iPhone 6 Plus, and the buttons on the side are terrible. So, I've found a new case I want to switch over to. The problem is, I can't get the case off. When I do get it to move, the phone starts to bend. I'm terrified that this phone will break, so I'm not sure what to due.
Any help is greatly appreciated.
Thank you in advance

I found instructions here for the removal of the two piece case:
http://support.case-mate.com/index.php?pg=kb.page&id=80
Lex

How to remove page breaks in converted document

This is probably more a Microsoft Word problem, but it started out as an InDesign document, so I thought it wouldn't hurt to post the question here in case someone else has encountered a similar problem.
I formatted an epub on Amazon for my job. Since I am more familiar with InDesign, I used it along with Amazon's script to turn it into an epub.
Since then, I've noticed the cover has inexplicably rotated 90 degrees on Amazon. I asked about it in Amazon's forums, and they said InDesign isn't really reliable for epubs.
So I'm trying to recreate everything in Word. The original Word document isn't up to date with all the editing and corrections I did, so I exported each InDesign chapter document into a PDF, then used Adobe Acrobat to save each PDF as a Word document.
Some of the resulting Word documents seem to be littered with multiple page breaks and/or section breaks. I'm able to delete most of them, but some of them fall right in the middle of a sentence and won't delete. I've selected the paragraph icon in the ribbon to turn on invisible characters, and I can't see a page or section break indicated in most of these breaks.
Anyone know what might be causing these and how to delete them?
Maybe I should just copy everything from my InDesign documents and paste them into Word instead?

Hello,
If your reports is executed in the MODE CHARACTER , the "Page Break" generaed in the output is the one defined in the prt file
Code Name : after page
http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwrefex/files/printing/printer_def_file_syntax.htm
regards

How to remove Pages, Numbers, Garage Band etc from my Iphone

I'm was buy new iPhone 6 with 64Gb Storage and after activation, find that it have pre-installed app:
- Pages
- Numbers
- Keynote
- iMovie
- GarageBand
I don't need all of this. This use more than 4Gb space and I can't remove this.
How to solve this problem.
I am feeling deceived, because now have problem with store music and photo content, I need upload it in cloud every day.
I can't accept advice to buy new 128Gb model.

Those apps should be removeable from your iPhone.
Hold one of the apps (e.g., Pages) down for perhaps about 2 seconds until it wiggles on your iPhone. Then press the "X" in the upper left. The other apps should have "X's as well.

How to remove pages when combining 2 pdfs into a single document?

I renewed my subscription to Acrobat for $89.99 in order to combine 2 pdf documents while removing a page from one. I used to be able to select the pages from a document prior to combining the 2 documents. Now there does not appear to be an option to select pages for combining... What am I missing?

You said in your first message that you subscribed to Acrobat. Our replies were about Acrobat. Indeed, PDF Pack doesn't enable any of those things.

Please help with how to remove attribute

Hi to all,
I am having some serious problems with removeAttribute (or more like remove anything). I want to remove an attribute from an element, but it just doesn't seem to work no matter what I do.
The following is an example of the xml:
<diffgr:diffgram xmlns:diffgr="urn:pgwc-gov-za:diffgram">
<DataInstance>
<ROW diffgr:id="3240DEAFE594482B86B3A31E77A13975" diffgr:hasChanges="inserted">
<VALUE>VALUE 1</VALUE>
</ROW>
</DataInstance>
</diffgr:diffgram>
I want to remove the diffgr:hasChanges attribute. I have searched high and low and can't find an example of how to do this. Could someone give me a quick example?
Thanks,
DayneO

You can make use of DELETEXML
scott@mydb> create table sun_xml(xmlcol xmltype);
Table created.
scott@mydb> insert into sun_xml
2 values(xmltype('<diffgr:diffgram xmlns:diffgr="urn:pgwc-gov-za:diffgram">
3 <DataInstance>
4 <ROW diffgr:id="3240DEAFE594482B86B3A31E77A13975" diffgr:hasChanges="inserted">
5 <VALUE>VALUE 1</VALUE>
6 </ROW>
7 </DataInstance>
8 </diffgr:diffgram>'));
1 row created.
scott@mydb> update sun_xml
2 set xmlcol = deletexml(xmlcol,'//DataInstance/ROW/@diffgr:hasChanges','xmlns:diffgr="urn:pgwc-gov-za:diffgram"');
1 row updated.
scott@mydb> select * from sun_xml;
XMLCOL
<diffgr:diffgram xmlns:diffgr="urn:pgwc-gov-za:diffgram">
<DataInstance>
    <ROW diffgr:id="3240DEAFE594482B86B3A31E77A13975">
      <VALUE>VALUE 1</VALUE>
    </ROW>
</DataInstance>
</diffgr:diffgram>

Help! how to remove a movie effect for other scene

Hi I am working on an e-card. I have 2 scene where "Scene 1"
has snow fall effect and "Scene 2" has message and greetings but do
not want the snow fall effect. So far the snow effect run through
out both scene but I need to stop it on scene 2.
The script that i got online is put under frame-script at
Scene 1. How can i make it stop at scene 2 and when the movie loop
back to scene 1 , the snow effect will run again?
Please help. thanks a lot.
Below are the script that i got from a tutorial to create
snow effect. It is put under scene 1 first frame.

rap onEnterframe with if statement testing what scene you are
in if not scene one animation stops. or put snow animation in its
own movie clip.
this.onEnterFrame = function() {
if(scene == 1){
for(var i=0;i<anzahl;i++) {
if(this["schnee"+i]._x>breite+10||this["schnee"+i]._y>hoehe+10
|| ersterlauf<anzahl) {
this["schnee"+i].speed =
(Math.random()*max_speed)+min_speed;
this["schnee"+i]._x = Math.random()*breite;
this["schnee"+i]._y = ersterlauf<anzahl ?
Math.random()*hoehe : 0;
this["schnee"+i]._xscale = this["schnee"+i]._yscale =
this["schnee"+i]._alpha = (Math.random()*max_groesse)+min_groesse;;
this["schnee"+i].r_xy = random(2) == true;
ersterlauf<anzahl ? ersterlauf++ : ersterlauf = anzahl+1;
} else {
if(this["schnee"+i].r_xy) {
this["schnee"+i].go += Math.random()*-0.2;
if(this["schnee"+i].go < -schwing_faktor)
this["schnee"+i].r_xy = false;
} else {
this["schnee"+i].go += Math.random()*0.2;
if(this["schnee"+i].go > schwing_faktor)
this["schnee"+i].r_xy = true;
this["schnee"+i]._x += this["schnee"+i].go;
this["schnee"+i]._y += this["schnee"+i].speed;
something like this.

Help please - how to remove the case....

I am working with my son to remove the case on his powerbook g4 17 1.5 to replace the hard drive. there is apparently a screw somewhere in the middle of the keyboard.
Without having to remove too many keys, can someone please give me a clue? Thanks in advance.
Powerbook g4 17 Mac OS X (10.4.7) replacing hard drive

You really want to be following this ...
http://www.ifixit.com/Guide/55.0.0.html
... which is a full disassembly guide for this PowerBook. I used it to replace my hard drive, and while it was a bit scary, it would have been impossible without that awesome guide.
PowerBook G4 Mac OS X (10.4)

Help! Yoga 8 - how to remove page?

Similar Messages

Maybe you are looking for