Help! Z77A-Gxx - Bios

I need some help with a new build that I built only a couple of months ago.
Z77A-G41 (according to box from MicroCenter, but Liveupdate says MS-7758 which is G43)
i3570k 3.2Ghz (4.2Ghz OC)
8Gb DDR3 1600 (800Mhz)
I had flashed my Bios to the lastest ver 2.9 and now I have things missing from bios that were there before including OC Gene All Functionality, Sleep/Hibernate ability, Wake ability, When booting it scrolls through Hex Codes in the lower right of the screen and flashes the Bios Flash Screen multiple times before actually loading Windows.
Someone please help me get my bios reset back to a stable/factory bios version!
before I flashed my bios I had saved the factory version of bios via M-Flash program inside the bios. Trying to load the image gives me an error that it is not a recognized image type. is this!?
I had called MSI Customer Support line and they told me to pull the Bios/Clock battery and let the computer sit without power for an extended period of time, which I did. I was hoping doing this would revert the bios version back to 2.0x but it still says 2.9. I still do not have OC Gene functions, Sleep/Hibernate, wake functions and the Hex codes are still there, but the bios splash screen no longer flashes and it now loads windows quickly like it was before I flashed.

USB stick formatted FAT32. Use the 'Fix My USB Key' feature, the stick will now be properly prepped. Just point the flasher to the BIOS file, do not open it or decompress it, the flasher will set it up for you. At the restart prompt, enter BIOS and set the USB stick as the only boot device, save and exit and it should begin the flash prompt with a screen asking you if you want to proceed. Tell it yes and watch it do it's thing.
There is a new beta, but this was the last final to date;
https://forum-en.msi.com/index.php?topic=161593.msg1238466#msg1238466
Don't forget to use the link in that thread for updating the IME driver after the flash.

Similar Messages

Z77a-gd65 bios/ram

good day to everyone.
first of all here is my spec:
i5 3570k
16Gb (4x4) Corsair vengeance 1600Mhz CL9
z77a-gd65
bios 10.10
problem nr.1
i can't make RAM working faster than default-1333.
i read lot of forums, where ppl able to do changes from 1333 to 1600. but i can not.
problem nr2.
it was only AUTO in timing (few month ago i was able to change numbers. i did nothing with bios, it just became AUTO by itself)
my i5 was working @ 0Mhz !!!
fixed by downgrading bios
i'm wondering... should be number like here?
is anybody can help me? how to make RAM working @1600 and more?
will be nice to receive step-by-step guide (better in pictures)
thank you
ps. sorry for not super English

Quote from: xmad on 24-October-13, 03:24:41
Remove and re-seat all of the components outside of the case on a non-conductive surface. While the cpu is removed, inspect the cpu socket for any bent or mis aligned pins.
Perform a full cmos clear and re-test with only a single stick of ram in DIMM 2, cpu, cooler and psu.
...now my pc is in non stop restart... lol. all i wanted its only make ram 1600.
done. i switched off oc genie and change settings in "standrd" mode. all 4 sticks of ram are working together.
thank you for help.

Msi z77a-g43 bios code b4 black screen

Hi, i have this mainboard update to day with bios 2.12 and this card reader, coolbox cr600v2. Well, the problem is that when i turn on the system i have black screen bios with code b4, any solution?

won't boot with the card reader
Board: MSI Z77A-G43
Bios: Version 2.12
VGA: Asus GTX 780 DCUII
PSU: Corsair hx750
Intel Core i5-2500K Sandy Bridge 3.3GHz (3.7GHz Turbo Boost) LGA 1155 95W
MEM: CDIMM1: Kingston HyperX KHX1600C9D3/4GX x2
HDD: Crucial M4 256GB
COOLER: Noctua U12P
OS: Windows 7 64bit Professional

Z77A-G54 bios not saving dram freq

Hey,
After latest z77a-g45 bios uptade, bios is defaulting dram frequency back to 1333 after restart or shutdown.
It was not an issue with older bios versions, if I set it to 1600 then it stayed 1600
Please fix it.

Wrong addressing here. If you found any bios problem report it to MSI for fixing it: >>How to contact MSI.<<
This is just a Users-to-Users Forum and we don't make bios versions.

Msi Board Z77A-GD55 bios corrupted and my pc now keep infinite rebooting HELP!!

this is the link showing my problem ...
before this happen it's rebooting but i can get to the bios and i tried to update it with the same version in the board and it reach 100% after that it keeps rebooting and i couldn't enter to the bios again. sorry my english is bad

May I ask WHY do you create double posts?
>>Please read and comply with the Forum Rules.<<
https://forum-en.msi.com/index.php?topic=182642.msg1311819#msg1311819
If possible RMA the board. If not, ask local store if they can reflash BIOS for you.
Topic Locked for double thread.

MOVED: Msi Board Z77A-GD55 bios corrupted and my pc now keep infinite rebooting HELP!!

This topic has been moved to MSI Intel boards.
https://forum-en.msi.com/index.php?topic=182594.0

May I ask WHY do you create double posts?
>>Please read and comply with the Forum Rules.<<
https://forum-en.msi.com/index.php?topic=182642.msg1311819#msg1311819
If possible RMA the board. If not, ask local store if they can reflash BIOS for you.
Topic Locked for double thread.

Please help me with Bios problem

I have laptop toshiba Satellite L735-S9311D.
I used windows service station and update bios to the latest version during installion I forgot to unplug my external HDD.
Error message appeared , Now no display on the screen.
So, Please I need help to solve my problem.

Please..............

Z77A-GD65 BIOS recovery

I attempted to update the BIOS to rev A8 (previous version was A6) using M-Flash.
The update failed and the board no longer boots from BIOS A
Switching to BIOS B lets the board boot properly.
How can I repair the A BIOS ?
System Config is :
MB: Z77A-GD65 (MS-7751)
CPU: QuadCore Intel Core i7-3770K, 3700 MHz (37 x 100) at stock frequency
RAM: 4 x G Skill F3-1600C9-8GAR (32451 Mo (DDR3-1333 DDR3 SDRAM) for system memory (32 GB minus HD4000 video memory))
Graphic card: None
Hard disks: 4 x WDC WD1002FAEX-00Z3A0 ATA Device (1000 Go, 7200 RPM, SATA-III) (2 of them are attached to the Z77 chipset and configured as RAID 0, the other ones are attached to the AS-Media controller and configured as Windows 8 Striped volume)
Sound card: None (Integrated audio chipset is used)
OS: Windows 8 Pro + Media center

https://forum-en.msi.com/index.php?topic=160450.0

Need help for reset bios password

hello
i need help for reset my bios password
my laptop is HP Pavillion tx 232
code 59637760
thank you
This question was solved.
View Solution.

Try
46795366
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Need help with a bios/cmos

Hi guys
Having a problem with a backlight which does not turn, I have reached a conclusion that i need to reset bios/cmos..
Looked through the manual guide, nothing there about the bios and stuff like that
Tried to take off the system battery which is inside of a laptop and was not able to do that cuz its stucked or something
Any suggestions??
kind regards
Laptop: x121e

hey Almas87,
is your unit's bios at version : 1.09/1.11 ? If it isn't do update.
Also, try uninstalling and reinstalling the Hot Key software.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Hi . plz help me. after bios update. i could work till I shutdown

After bios update I could work till I shutdown my laptop g510 . Now when I press power button. White light near camera shows but again it goes off. Plzzzzz help me
I also pressed one recovery. Then pressed f2 and f9 f12 nothing working.

take it to point of purchase with proof of purchase if you can't find a Nokia care point near you
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

I need your help with the Bios password!

Hi,
I'm using a satellite l305D-S5895 and i have a problem with the bios password. I was setting a password in the Bios or CMOS ( i don't know exactly). Every time i start up my computer, a blue box appears and ask me for the password. I know the password but I think it complicated and i want to take it off, and clear it. Please help me with that. If you guys have a way by turn of the battery or push the reset key inside the laptop, please give me some pictures to show that. Thanks a lot.

This does not sound like a Toshiba Bios password. The Toshiba passwords come on a black screen with white writing and say "Password =". Toshiba Service Centers have the tools needed to remove the password. provided that you can prove the computer is yours. So bring a proof of purchase and be prepared to pay, because password removal is not covered under warranty.

Help with x230 BIOS.

I just can't get into the BIOS, i've tried all the key's. I have updated the BIOS to the latest release. My system comes with intel i5 3210.
I need to get into the BIOS to enable virtualisation to run XP on windows 8. I can't seems to install Hyper-V platform without this feature enable.
Solved!
Go to Solution.

Good morning.
Did your X230 come preloaded with Windows 8? If so, the process is a bit different than in the past.
Have a look here: http://www.makeuseof.com/tag/how-to-access-the-bios-on-a-windows-8-computer/
Does this help?
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

[help] Z77A-GD65 not starting fully

ok so when i turn on the motherboard all the fans in my PC turn on and the LED1 light turns blue for about a second then everything shuts off. My power button stays green even when everything else shuts off and the alarm LED is OFF. I have tried re plugging everything in and am placing only one stick of RAM in the correct spot. here are my system specs:
CPU: intel i5-2500 3.3 (3.7 turbo boost) i5-2500 Sandy Bridge
GPU: GeForce GTX 560 - ASUS ENGTX560
RAM: 8Gigs @ 1600 - G.Skill Ripjaws X Series
PSU: 550w - XFX Core Edition Pro
HDD: 500G @ 7200RPM - Seagate SpinPoint F3
ssD: 60G @ 525MB/s read, 475MB/s write - OCZ Agility 3
MotherBoard: MSI Z77A-GD65
Tower: Corsair Carbide Series 400R
OS: w7-64bit Home Premium
DD: ASUS DRW DVD:RW

Hi
I just got that same board.
If you keep looking at the Diagnostic display on the board while starting the PC, then just notice what the code is when it stops. The display should change code according to what init state its in.
That way you can determine at what initialization step it fails. Check the manual for the error codes.
For example if it stops at Cpu Initialization, there is a good chance that the CPU is faulty or simply overheating if cooler is not properly seated. From what you explain, it could sound like Overheating CPU.
Are you using the H80 cooler in this build? It can be a bit tricky to mount properly.
You can also try the Bios switch to swap over to the backup Bios. In case the bios is corrupt.

Please help me update bios

Hey, i got an MSI N560GTX-Ti Twin Frorz II/OC (S / N: 602-V238-16SB1101161349).
sins Live update dont work and i havent updated my card seens i bought it, i was hoping for some help here.
my current bios is 70.24.0A.00.00 (jfr GPU-Z)
where can i find the newest bios for my card?
THX
Tovalb

Quote from: Svet on 03-November-11, 20:20:03
no
Okei i see.. You dont make it easy for me

Help! Z77A-Gxx - Bios

Similar Messages

Maybe you are looking for