Help! Zen Micro stops in the middle of rebuilding- missing half of mus

My Zen froze a few days ago. I went to reset it like I always do, but this time when it was rebuilding, it stopped about half way through.. starting making this clicking noise and then went back to the now playing screen. But now i am missing like half of my music because it won't rebuild for some reason. I am also not able to add music from my computer to it anymore. Every time I turn it off and then turn it back on it starts rebuilding but never finishes. Has this happened to anyone else? Any advice? Please help!!
Thank you!?

I think it might be. Is that fixable?
I also forgot to mention that when I hook it up to my computer it isn't says that it isn't there. It still charges but other than that it's like it's not even connected.

Similar Messages

Help! AME Stops in the Middle of Encoding - AME 5.5

Hello - I am hoping someone can help me as I am hitting a brick wall with my production suite! I am going to be as detailed as possible however I am not an expert in how software and my hardware interact.
Issue - My Adobe Media Encoder stops in the middle of encoding and does not complete the task in the queue.
Software -
1. Adobe Production Premium - Premiere Pro CS 5.5 (v5.5.2) and Adobe Media Encoder (v5.5.1.12)
2. Mac OSX v10.7.5
Hardware -
1. 12GB Ram
2. ATI Radeon HD 5770 1024MB Graphics Card (obviously not supporting Mercury Engine)
3. 2x 2.4GHz 6-Core Intel Zeon
Issue History
- Until this point, all of my projects, videos, and exported media have been 78 minutes or less. I am now working on a project that is 112 minutes of full HD footage. Before Thursday, AME has performed flawlessly for me. The project in Premiere Pro has source video footage that is 1920x1080 29.97 (50mbps). On this Premiere Sequence there are several dynamically linked AE compositions with upper and lower thirds and titling. Finally, there are maps that are in native 720p size movies that are scaled to fit throughout the program at the beginning of each chapter.
- I am attempting to export and encode this video for use in Encore. I have queued the project for export out of Premiere into AME using the following settings:
H.264 Blu-ray
Video Only
VBR 1-pass
Custom Bitrate - 26.5 target, 35 max
Render at Maximum Depth
Use Maximum Render Quality
Prior to Updates in Software:
- On Thursday I queued 4 files for export: 2- PCM audio only files, 1-H.264 Blu-ray video only, and MPEG-2 DVD video only
- AME ran over night and produced the following: 2 audion files completed successfully, 1 H.264 file completed successfully, MPEG2 file seemed to be 'hung up" and AME was not responding.
- Shut down/forced quite AME and tried to encode only the H.264 file. The encode failed as it hung up at different points in each attempt in AME.
- I searched and installed updates for my adobe production suite (premiere pro, AME, and others were updated to the versions listed above).
- Friday I attempted to export the H.264 file from Pr to AME and it encoded successfully!
After Updates were Installed:
- I had to make some additional revisions to the project in Pr after reviewing a draft Blu-ray. Now trying to export the revised video has failed each attempt:
- On Saturday, I experienced the following results with AME:
2 PCM Audio Only files - encoded successfully in AME (with Pr running)
H.264 Video Only file (specs above) failed - the AME froze about 1/3 through the composition.
At this point I shut the computer down and let it sit overnight.
- Today (Sunday), I tried again and experienced the following:
H.264 Video Only encode (same specs) though this time I shut down Pr thinking this would save RAM and the encode failed again. I did notice that it locked up at the same point as the previous attempt on Saturday which was a new symptom.
RAM usage was 7-9GB during the encode.
The place where AME locks up is immediately before a transition from the source video to the 720p map footage. Although there are two other segments with the same transitions and 720p footage that it did encode through.
I have researched this issue on this forum and have read the following thread thoroughly: http://forums.adobe.com/thread/856263
The above thread described the issue I was encountering before I installed the updates precisely. But now I am still unable to successfully encode this project in AME to H.264?
I am hoping someone can provide something to help, I have a completed project and I can't get it encoded! (I contacted Adobe and they said my SW was now unsupported from their customer service).
Thanks for any help with this!!!
Chris

Thank you Todd for your quick reply - I contacted Adobe via Live Chat and never got a case number... I did however send the transcript of the conversation to my email...
Khongyairong: Please give me 2-3 minutes while I check and see what best I can do to resolve this issue.
Christopher Kratzen: sure - I have checked the forum for similar issues and found that there was a large thread on the subject - but no clear solution. I am starting to panic because I can't get my project to export
Khongyairong: Okay . Thank you.
Khongyairong: Thank you for your patience.
Khongyairong: Christopher, I am sorry to inform you this, we don't have support for CS5.5 , we have support available only for CC and CS6 . I request you to please refer support portal or forum where you can repost your issue and our experts will be giving you the answers.
Khongyairong: You can also purchase the phone support if you want a support.
So your advice would be to pursue Adobe Technical Support on this issue? I wasn't sure how to go about this since I really haven't had an issue until now... the production suite does a spectacular job with everything else! Just need to get my finished program encoded....

Ok. So my iTunes started acting up a few months ago. ALL of the songs I purchased from the iTunes store stop in the middle of the song and then go back to the begining (I keep it on repeat one song by the way). Please help!!! (Windows 7)

Ok. So my iTunes started acting up a few months ago. ALL of the songs I purchased from the iTunes store stop in the middle of the song and then go back to the begining (I keep it on repeat one song by the way). Please help!!! (Windows 7) I would really like to hear my songs all the way through, but I can't . I tried the "Convert Protected ACC files to Purchased ACC files fix" but it DIDN'T work. I don't know what to do. It does it when I transfer the music onto my Classic too.

What do you mean "doesn't recognize"?

I just bought my ipod touch and i didnt mean to mess the password up but i did and now it is disabled and itunes wont let me restore it and it stops in the middle of the restoring process can anyone help??? please

ok im in need of some help i had just bought a brand new ipod touch from walmart and when i got it home i was trying to cope with all the new things on it and i was just fooling around like figuring where things where at and i put a passcode on my ipod and i must of not typed it in right and now my ipods disabled because i tryed to many times and im at my tenth time and i misspelled it obvi and now i need help i plugged it into intunes put it into recovrey mode and then restored it and it stopped in the middle of the restore mode and now it wont finish and im still locked out of my ipod and i need help i mean i just got it and it would be nice if anyone knew that could help me.???? please i cannot figure this out and usually i am very good at ipods and stuff but this time i am stummped and i dont want to call apple to hasel anyone ...anything thats helpful im grateful to hear thanks soo much
-Kara :/

Follow the instructions to the letter here > iPhone and iPod touch: Unable to update or restore

When i download the windows support it stops in the middle of the bar and says; Device appears to be offline. HELP ME OUT!!

when i download the windows support it stops in the middle of the bar and says; Device appears to be offline. HELP ME OUT!!

Try downloading from here http://www.apple.com/support/bootcamp/downloads/
Is your device correctly formatted in accordance with the Bootcamp Installaion Instructions?

Creative MediaSource won't recognize my Zen Micro all of the sudden!! What is going o

When I first began using my Zen Micro, Creative MediaSource worked fine. I could start my player and it recognized it right away. Then I was told I had to update my firmware and download an update to MediaSource. I did both but shortly thereafter I started having problems! Primarily, when i plug in my Micro a window pops up where I have 3 options, none of which are Creative MediaSource. The window has "MTP Media Player" across the top bar, but i havn't a clue what the "MTP" stands for. The 3 options given are "Sync your music using Napster", "Synchronize media files to this device using Windows Media Player", and "Take no action". I initialy tried "Take no action" and then opened MediaSource only to find it didn't recognize my Micro any more. I then e-mailed Creative for help and got a reply telling me to.............
Thank you for contacting Creative Technical Support.
In regards to your issue, you can try uninstall and reinstall
MEdiaSource with these procedures.
. Click START -> RUN -> type MSCONFIG and click OK.
2. Click SELECTIVE STARTUP and then uncheck LOAD STARTUP GROUP ITEMS.
3. Apply the changes and reboot the computer when prompted.
4. Uninstall MediaSource from the system using ADD/REMOVE PROGRAMS.
5. Manually delete the MediaSource folders from the computer system :
C:\PROGRAM FILES\CREATIVE\MEDIASOURCE
C:\PROGRAM FILES\CREATIVE\CTCDDB
C:\PROGRAM FILES\CREATIVE\MEDIA MANAGER
C:\MEDIA\MUSIC
6. Right-click your My Computer icon and click Properties.
7. Click the Hardware tab and then click Device Manager.
8. Remove any listings for Creative NOMAD products in the Device
Manager
(they will most likely be located in the Uni'versal Serial Bus
Controllers category).
9. If you have a category call Other Devices, look for listings in
there
called USB Device. If you have any, remove them.
0. Install MediaSource only from the original installation CD.
NOTE: DO NOT OPEN MEDIASOURCE WHILE PERFORMING THESE PROCEDURES.
Also, you can try reloading the Zen Micro's firmware through recovery
mode.
Move and hold the Power button to the Power On position and re-insert
the battery to the Zen Micro. Hold the Power button until the rescue
mode appears.
Clean Up: Performs a disk scan on the players hard disk
Format: Formats the players hard disk All contents will be lost
Reload OS: Reloads the Operating System on the Jukebox. Do not select
this option unless you have downloaded the firmware. Reloading your OS
will not effect the contents of the files stored on your Jukebox Zen
Reboot: Reboots the device
Please attempt the options 'Reboot' and 'Clean Up' first. If they do
not
help, you must try 'Reload OS'. To do this, you must have a downloaded
firmware from our website ready. Please let us know the results after
these steps, as soon as possible.
For faster service please reply with previous correspondence when
replying to this email.
Best Regards,
Technical Support
Creative Labs Americas
"Get Creative"
I followed the directions, but 3 of the folders listed in step 5 didn?t exist (only C:\PROGRAM FILES\CREATIVE\MEDIASOURCE did), there were no Creative NOMAD products listed as in step 8, and there was no ?Other Devices? as stated in step 9. I did everything else for all the steps through step 0.
I then re-installed Creative MediaSource from the CD only to find it still didn?t recognize my player! I?ve now done this twice with the same results!
Zen Micro Media Explorer doesn?t even recognize my Micro when it'ss plugged in! It just keeps saying ?The device is not connected. Please connect your Zen Micro to the computer?.
I?m hardly a tech expert, but it seems to me that something on my PC is detecting my player and decieding for itself that the only 2 programs it will let manage my Zen Micro are Napster and Windows Media Player. If this is the case where do I go from here?!?!
Moderator Note: Removed the name of the Email Advisor. Please do this in the future when posting email responses from Creative.Message Edited by Jason-CL on 07-2-2005 02:05 PM

LakeTahoeGuy,
Just as SSR mention, if you're using v2.xx.xx (MTP) firmware then you will need to get the correct version of Media Explorer that support this firmware and also install the MTP plugin for MediaSource. Both the software and plugin are available from the site SSR mention.
Jason

Printer stops in the middle of a page

stops printing in the middle of a sheet of paper and error code 0xb981b005 165:hw_interupt-hwv2.c comes up. The printer still says it is printing, but won't cancel or turn off. This has happened over and over. We unplug it and sometimes it will start and print a few things left in memory and then stop in the middle of a paper. Now the error code is 0x8810a620. We really like this printer and will appreciate any help you can give us. Thank you.
doc37324

Hi doc37324,
You don't indicate which printer that you have. Depending on the printer, there is a list of Ox error codes and documents for troubleshooting the associated codes. Most of the codes associate with an ink cartridge failure, but not always.
You could find your product support page for your product and input 0x in the search field. In some cases, two documents might show up. One of them walks you through how to reset your product. I've attached the link to that one here. I believe it is for most Officejets and Photosmart printers.
0x error on front panel
To find your product page, insert your product name at this link and then type in 0x in the search field on the product page:
http://www.hp.com/#Support
Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
I am employed by HP

HT202358 iPhoto Library Upgrader will stops in the middle of operation and will not finish. Now what?

I downloaded iPhoto Library upgrader, installed and attempted to use it. It stops in the middle of operation and will not finish. Now I cannot open my iPhoto Library! I'm freaking out a little. When I try to open iPhoto, it tells me I need to "prepare it" with the upgrader program. When I select iPhoto Library as the Library I want to upgrade, it tells me I don't need to upgrade it and should be able to open it with iPhoto. Ugh. Help??

If your photos have any value to you you should have an ongoing backup program - TimeMachine is a good first choice
For this purpose simply duplicating the iphoto library is adequate since you are not trying to protect against human or hardware failures - just against a rare rebuild issue
LN

I upgraded a week ago and every since it constantly stops in the middle of running and says "Mozilla Firefox not responding" the screen goes grey and the the little blue circle goes around and around,it didnt do this till I updated.

I upgraded a week ago and every since it constantly stops in the middle of running and says "Mozilla Firefox not responding" the screen goes grey and the the little blue circle goes around and around its so annoying and does it all the time like while I'm typing this it has happened twice, it didn't do this till I updated.

hummm never had it do that till I upgraded last week PLUS I lost all my Favorites/Bookmarks that really pissed me off my husband and I lost ALL of them I have had them for years and I upgrade and lose them can't even tell you how mad we were 8o/ very frustrating to say the least. Thanks for your help!! CRAP it just did it again I guess it didn't work........GRRRRRR!!!! I'm atta loss 8o(

HT1339 I have an ipod classic. I have approx. 2000 songs on it. WHen I move the settings to shuffle all music, the music stops in the middle of the song and moves on to the next one. It happens every other song or so.

I have an Ipod classic 120gb. I have approximately 2000 songs on it. When I put it on shuffle to play it, it stops in the middle of songs and moves to the next. This happens every other two songs or so. Please help!

Try playing the song again and if it does it in the same spot on both your ipod and itunes then you have a corrupted file. You need to re-download the song. Don't worry, this is free if you bought it on iTunes. First, verify that you did buy the song on iTunes and not anywhere else. Go to the iTunes store. On the right hand side of the window there is a column named quick links. Look for "Purchased" about 2/3 of the way down. Click on it. The next window that shows up should show you all the tunes you have bought. Find your tune and you'll see that is says "downloaded." Now you know you have the tune.
Now go back to your music library on the left hand column of the window. Click on Music. Find that tune that is giving you the problem. Delete the song.
Now go back to the iTunes store like before and go back to your "purchased" list. The page needs to be reloaded Press the back button and then click "purchased" again on iTunes so the list reloads. Find your tune again. Now instead of it saying "Downloaded," it has a picture of a cloud with an arrow pointing down. Click on it and the tune will download again with, I hope, no problems. I hope this helps.

My scanner is stopping in the middle of a scan. it then gives me an error message

my scanner is stopping in the middle of a scan. it then gives me an error message that communication cannot be established and to restart my printer. restarting printer/scanner did not gelp

What printer?
Can you make a copy from the front panel of the printer?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

LaserJet 1536dnf scan stops in the middle

hi
while scanning the first page scans correctly, when you return the scanner stops in the middle. The second sheet scans only half!
have to press back and scan again! scanner then not all scans leaves 5 cm below
which fault?
WIn_xp_sp3 - USB

Hi @Rus636 ,
I understand that you are having issues scanning on the Windows XP computer. I can help you today.
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
If the issue persists, I would disable all the start up programs and temporarily turn off the Antivirus Software to see if that is causing the issue. How to use MSCONFIG . Click on the start up tab and click disable all.
Restart the computer.
Try scanning again.
Then you will have to go back in and turn the start up programs and Antivirus Software back on again.
Please provide the following information so I can assist you better, if you are still having issues.
How is the printer connected? (USB/Ethernet)
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
Are you having any issues printing from the computer or copying?
Were you able to scan multiple pages when turning off the start up programs and Antivirus Software?
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Apple TV 5.2 update stops in the middle of Step 1 of 2

It look like Apple TV 5.2 updat stops in the middle of Step 1 of 2: Preparing update... It's been sitting there for over an hour. Why and what can I do?

Welcome to the Apple Community.
You can't do much else besides pull the plug. If it causes further problems you should be able to restore as below:
Get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    1.    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    2.    Connect the micro USB cable to the Apple TV and to your computer.
    3.    Reconnect the power cable (only for Apple TV 3)
    4.    Open iTunes.
    5.    Select your Apple TV in the Devices list, and then click Restore.
On the other hand you may be able to simply start the update again. If however the update continues to fail, you should try the restore routine above.

I have had two movie rentals, stop in the middle of downloading tonight, both giving me the error message "(err = 50)" -- It looks like its a network connectivity message, but I'm connected. Any idea on what could be causing this? No info anywhere!

I have had two movie rentals, stop in the middle of downloading tonight, both giving me the error message "(err = 50)" -- It looks like its a network connectivity message, but I'm connected. Any idea on what could be causing this? I cannot find info anywhere!
Thanks for any help

If you have anti virus software installed, disable that.
Try turning off the Firewall in System Preferences > Security
iTunes: Advanced iTunes Store troubleshooting
It would help when you post to tell us which Mac OS X you have installed. Thank you !!

Preloader stop at the middle

When I put a preloader into my project, preloader="", the preloader stop at the middle and not continue. But when I quit this command the preloader basic load perfectly. I need a help!
Thanks!

Try this, it's called SMC reset:
Shut down the computer.
Disconnect the MagSafe power adapter from the computer, if it's connected.
Remove the battery.
Press and hold the power button for 5 seconds.
Release the power button.
Reconnect the battery and MagSafe power adapter.
Press the power button to turn on the computer.

Help! Zen Micro stops in the middle of rebuilding- missing half of mus

Similar Messages

Maybe you are looking for