Help Zen nano p

<p align="center">[img"]http://img37.imageshack.us/img37/4588/zennanoitaliaqu5.jpg" width="95" height="35">
Hello ! I?m italian !
I must buy a ?Creative Zen nano plus GB? and i am searching some information...
)? Have the Zen the possibility to load songs like usb pen ? Or it needs the installation of the software ?
2)? Have the Zen the possibility to divide the songs in folders ?
3)? Have the Zen the possibility to visualize the titles of songs on its little screen ?
4)? Have it the FM radio and vocal recorder ?
Thanks to all and excuse me for my bad English !

)? Have the Zen the possibility to load songs like usb pen ? Or it needs the installation of the software ?You can cut/copy paste music from usb pen to Zen using windows explorer. The same as copying from dri've to the other. 2)? Have the Zen the possibility to divide the songs in folders ??You can create and name folders and put your songs in the folders using windows explorer. 3)? Have the Zen the possibility to visualize the titles of songs on its little screen ?The titles do scroll across the screen when the song is playing. 4)? Have it the FM radio and vocal recorder ?Access this from the menu. Select FM Radio for radio and select Microphone to record. To play recorded tracks, select Recorded tracks from the menu. Access the menu by pressing the gray button.

Similar Messages

Help, Zen Stone and Nano Plus not recognized on my PC (XP) have tried everything I can f

Hi,
I recently bought a Zen Stone but I cannot get my PC to recognize it. Everytime it is plugged in I get taken to the "Found New Hardware Wizard" and it cannot find a driver. I have gone through all the help and none of the proposed solutions makes any difference. The Stone charges fine, but I cannot access it: in Device Manager it appears in Other Devices and does not appear in My Computer. The Safely Remove Hardware icon appears in the tray but when I right-click on it, nothing happens. The same thing is also happening with my older Zen Nano Plus which I am sure was recognized a couple of months ago. Both the Stone and the Nano PLus play music and I tried the Stone on a friends computer and her Windows XP recognised it fine. I am running Windows XP with Service Pack 2 and I automatically do all the recommended Windows Updates. Things I have tried: * Unplugging all other USB devices * Using USBs at back of computer * Using a paper clip to reset the Stone * Changing the Power Management options for USB as advised on Creative Media website * Updating my chipset device drivers * In Other Devices trying to reinstall drivers * Downloading new drivers and other software for my Zen Nano * In the BIOS switching off USB 2.0 * Rolling back from Windows Media to 0, removing Microsoft User-Mode Driver Frameworks Feature Pack .0, and downloading "Update for DRM - enabled Media Players (KB8922)" * Downlaoding Iomega patch * Running msconfig to remove all startup and Service files apart from Microsoft to ensure there is no conflict with other loaded software (still didn't work) Something has defintely changed in my computer to stop Zen from working and yet the USB ports work fine with my digital camera, printer, keyboard and mouse. Please, please, please, does anyone have any ideas about what may be causing my problem Thank you Stephanie

Hi, Quick update, have also gone through everything in http://forums.creative.com/creativel...cending&page=3 and tried downloading the Fixup but with no success. Made the major mistake of following advice to delete USB controllers and ended up with no USB ports working (not good since my keyboard and mouse use USB). Had to do system restore to get back to square one. I have contacted Creative support several times and tried everything they suggested and they have tole me that there is nothing else I can try. Can find nothing else to try and with so many people experiencing the same problem with the Creative Zen's, I have come to the conclusion that the Zen is not compatible with many people's XP and only wish I had known all this before I bought it. If anyone has any other ideas I can try, please let me know, otherwise I will have to send my new Zen Stone back to Amazon as completely unusable. Goodness knows how anyone who doesn't know their way around a computer is ever supposed to get one working. I am really disappointed with Creative about this. Anyone recommend a good MP3 player make that actually works in Windows XP Regards Stephanie.

Problem with zen-nano-plus!! please help

i have the zen-nano-plus 52mb. and i try to update the firmware with latest version but i don't delete the music files in it.
i have started the instalation and the program asked me to delete the files on zen. (i didn't care keeping the files, so i continue the instalation)
when the program began to delete the files, after in few seconds i received an error messege from windowsoperating system reported error. the limit time on semaphore it's over.) now i have an 0.00.00 firmware version and i can't use the zen-nano because it's not starting. i have tried with the recovery tool but same situation it happend again. please help me if anybody knows something!!!!

Go to Creative.com and click the Support link. Look for the firmware driver for your Zen Nano and follow the directions. I had to do this to fix my Zen Nano Plus, because it had the exact same problem that yours had.
Good luck!

Zen Nano Plus- help can't turn it

I bought a Zen Nano Plus back in May, it worked fine until now. Now it will turn on half way then shut right off. My computer will recognize it, but the software won't. i can use all the help.

thanks, i tried it and now it works

Help detaching Zen Nano P

I am clicking the icon on my taskbar to safely remove my zen nano fromthe usb, but the computer is not letting me remove it, it says the generic volume cannot be stopped right now, try again later
please someone help me

Have you closed any programs that might be connecting with the player?
In Win XP you can right click on the dri've letter for your player and on one of the tabs there is a setting to disable write-caching for the dri've. If you select this option then you don't need to use the Safely Remove Hardware feature in the task bar.
I plug mine in and out as and when I want with no problems at all.
PB

Creative Zen Nano help ple

Hi i'm new here and i'm very sorry if you have seen these post already.
I have a Creative Zen Nano GB for almost a year now. 3 days ago i noticed it started to turn off by itself. I did everything from changing the batteries, to deleting all the songs on it, and updating the Firmware. When i updated the Firmwire it worked fine for about hour then it shut off by itself, i went to turn it back on and no luck. It still wont turn on, but it hooks up to the computer fine. Can anyone please help me with whats wrong? I'm leaving for Florida in the next day, and we are driving and i need my mp3. Please help. Please and Thanks

Are you using WMA files? Many of the problems people seem to have with the Nano Plus are when using wma files. I rarely use wma files on my n200.

My Zen Nano is dead! Help me!

Hello there!
I've got one Zen Nano for almost 0 months and it never gave me any trouble. It was working perfectly till yesterday.
Today, when I tried to turn it on, it turned the backlight on, displayed the Zen Nano logo and right after it, it shut down. I've tought it was a problem with the FAT, so I tried to format it, without any success, windows explorer would freeze when I right click the dri've...
The other thing that could be wrong, was the firmware, so I downloaded the firmware update thingy (I've done it before, but there was a new version I didn't have yet), turned it on holding the Play/Pause button to get in the recovery mode. It recognized my version and said it would update to the new one. I said ok and waited for a while.
A few moments later it showed the following message "Error - could not perform SCSI command."
The updated closed, and since then, my Zen Nano is completely dead.
Is there anything I could try? Any tip? Suggestion?
Thank you for your attention.

I've updated to .2.blahblahblah and right after it was finished updating it turned off only to never turn on again.
With a battery dead
Without a battery (plugged into USB) dead
No recovery
No USB recognition
It's a lifeless lump of crap right now. What a waste of money. Its only 2 months old....argh.

Moderators please help my zen nano dosent work fine anym

OK I own a zen nano for about two months! my zen nano dosent wanna turn on now the computer recognized it the usb cable is ok batteries are good but my zen anono dont wanna turn on! well I t only turn on when I disconnect it from the computer and the recording mode dosent work! no recordings for me!!! sometimes when I can painfully turn it on it turn off!!!:angry: I want to her my music I think isnt fair!!! I had alot of sacrifices trying to buy it and now? is a fiasco!!!!!!!!!!!

You need to install the drivers onto your PC and then connect the player in Recovery Mode. There are lots of posts telling you how to do this. Then reload the firmware which you can get from Support->Downloads.
PB

Help needed please with zen nano p

Hi all I got a new zen nano plus last week and have had a nightmare ever since. I was told that it was very straight forward to use (just cut and paste from windows media player into a bubble!) and I liked the extra features it had over the ipod shuffle. However, I loaded on the software and it loaded on okay, but the media source player went all strange and started to play music at a super fast bitrate. I stupidly thought if I unistalled it and started again, the problem would be solved. It got worse, 5 hours later and after losing loads of music I resorted to a sytem recovery. today i have spent a similar amount of time trying to reinstall the mp3. the player downloads okay however when I put a cd into rip it tells me I have an error and won't play. i have noticed when I do install it it goe's from about 20% to 99% and seems to miss out the rest. My compuetr also dosn't seem to like the fact that the media source won't download properly. however I don't seem to be able to completly uninstall in the control panel . it tells me that setup has encountered a problem and needs to close. anyone got any ideas please - cause i am being dri'ven insane

I use the free version of Music Match(www.musicmatch.com) to get music from CDs to mp3s on my hard dri've. If you want to transfer protected wma files(those purchased one at a time, not subscription music. The player doesn't support subscription music) to the player then use Windows Media Player 0. To Transfer mp3 files to the player, use Windows Explorer(right click on start, then click on explore). Use Windows Explorer to set up folders on the player (File, new, folder) then use Windows Eplorer to drag and drop files to the folders on the player. For music quality almost indistinguishable from the CD use 256 kb
ps.
That will give you around 9 hours of music on a gig player. If you want 8 hours of music but lower sound quality then use 28 kb
ps.
96 kbps is between the two. I use 256 kbps for my music.

Zen Nano Help please!!

Well I am actually putting music on my PSP but this also goes for my zen nano too. everytime i put music from the computer on the zen nano it always puts it alphabeticlly. i do not want it like that. can someone tell how could i put it in a order that i want?

You should be able to do it from the organizer yes, or if not for some strange reason i think it's somewhere on the PSP, don't remember because my songs never com e in alphabetic

Problem with transfer and ordering of tracks on new Zen Nano P

I recieved my Gb Zen Nano Plus player on wednesday and transferred quite a few tracks to the player that night. They transferred fine, I was able to customize the playing order and all the songs play fine.
But since then, I have been unable to transfer tracks to the player or change the order of the tracks. The player is recognised when I plug it in, but I am just unable to do anything with the tracks!! I have plenty of memory left and it isn't anything to do with the USB.
I really need to know what's going on and how to fix it :-(
Help!!!

What error message do you get when you try to transfer the extra files?
Are all files in the root folder? If so see the FAQ.
PB

I am having a problem with my Zen Nano P

When I first got the player for my birthday it was great. I transferred a lot of music onto it and would take it to work out or just to listen to it. But like all people I got bored with the list so I deleted all the music and made another one. Well after three lists I can no longer sync it with my computer. I have tried everything. The USB ports are working, I can sync other devices up with my computer, but for some reason I can no longer transfer songs. Its not like other problems I have read about like man I can't transfer all the songs I want no I can't transfer any songs, and the player has been emptied.
So lets recap, no songs on the player, have tried Mediasource and Windows Media Player, and still can not transfer any songs at all. And I think my warranty has run out so I can't get my money back or get a new player.
Please help if someone can.

You are welcome. I am happy that the redownloading of the firmware helped you and fixed your problem. It is the first thing I try whenever my players don't do what they are supposed to do. I use my Zen Nano Plus mainly for audiobooks. It is a great little player.
luvmyrescuedogs

Start-Up problems in Zen Nano 51

Greetings... I just bought?3 Zen?Nano players 2 months ago, everything was working perfectly but now I'm having problems with one of them, when I press the play button to power on my player, the screen shows the Creative logo but immediately it turns off, I've tried to format the player but when I connect it to the PC, the player indeed?appears as?a removeble dri've?in My PC but when I try to explore it, a message appears that says something about like: ...the device cannot be opened due to an I/O error... I'm using XP SP2, and I have tried to format the zen even in safe mode but no response at all, every time the player is detected but the system is unable to open it. I really hope that you can help me. Is there a way to reset physically this player?, I'm going to try updating the firmware but if the system isn?t able to access the device maybe this couldn?t be possible. I expect any comments about my problem, thanks again and have an excellent day. Regards.

I would try [url="http://us.creative.com/support/downloads/download.asp?MainCategory=23&nRegionFK=&nCountryFK =&nLanguageFK=&sOSName=Windows+XP&region=&Product_ Name=ZEN+Nano+52MB&Product_ID=58&modelnumber=&driv erlang=033&OS=0&drivertype=0&x=29&y=8">reloading the Nano's firmware.[/url]
Notes:
* This firmware only works with Creative ZEN Nano players. Do not install this firmware for other players.
* You will lose all content in your player when you install the firmware. Back up any audio or data files in your player to your computer before installing the firmware!
* To install this firmware, do the following:
. Download the ZENNano_PCFW_LF__2_03.exe file into your local hard disk.
2. Make sure your player is connected to your computer.
3. Double-click the downloaded file.
4. If you are prompted to reset your player, click OK.
5. If the Find New Hardware dialog box appears on the computer screen, follow the instructions on the screen to complete the wizard.
6. When the firmware download dialog box appears, click Start and follow the instructions on the screen.

How can I get my itunes library on my Zen Nano Pl

I have a large selection of music in my itunes library and would like to get them into my Creative Zen Nano. I also have alot of music on my hard dri've and am having a hard time getting it to load. Help!? Sloan493

Hi Sloan,
What format is your music in? If the music is in MP3 format then it should be fairly straightforward, you can transfer them across to the player and they should work. Where do you run into issues, and what happens exactly?
If the music is in AAC format it will not work, that format is not supported by the player. Provided the tracks aren't protected, you can convert them to MP3 first, and then transfer to the player.
Cat

Error Message when Trying to Rip to Zen Nano Plus

I use Zen Nano Plus Media Explorer and I get this message:
"Unable to lead database component. The program will now exit."
I can't figure out what is missing in order to correct the problem. Can anyone help me?
I use Windows XP Home on my HP Laptop.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Help Zen nano p

Similar Messages

Maybe you are looking for