Helpful hint for new owners of any creative player.

. This may be old news to many but if you really want top quality sound upgrade the headphones.
Two really good ones you can get for around ?20 online are
A) Sony MDR-ED2LP
B) Sennheiser CX300
The Sony are very good but once I ran my Sennheiser's in the difference was amazing.
Sorry Creative,your supplied headphones are ok but do spend the little extra yourselves
and notice the difference!
ZENFLASH

Hi,
I'm from germany so no 'best buy' but I think I will lock around sleeve/bag for a different product with same measures. Any tip?
The clear plastic case is not what I want. I would like to use the player without such protections. I just want a sleeve to protect the player while its in my jacket/pants.
Btw, i have bought this version: Creative Zen (maybe european version?). I also doesn't seem to have your mentioned sleeve. I also couldn't find it on the website.
Anyway, thank you,
Chris

Similar Messages

Helpful hints for new Creative Zen MP3 2/4/8/16/32 GB (flash) Users On

Summary of helpful hints (from this forum and me) for new Creative Zen MP3 2/4/8/6/32 GB (flash) Users Only!
Rev..
Date: 4/28/2008
Author: ZenAndy
Creative terminology:
MP3 Player Recovery Tool - A program that resolves the majority of player problems quickly.
One click is all it takes to update your player to the latest available firmware, and to give your player a clean bill of health.
Link: http://www.creative.com/products/mp3...me.asp region=
Note: You can also go to "Creative" "Support" "downloads" choose your MP3 Player type to obtain the latest firmware and software releases.
Note: On your Zen you can look under "System" & "Information" and then compare the firmware download
releases OR you can have the "MP3 Player Recovery Tool" (above) do it for you automatically.
Note: Creative Zen 4/8/6 GB "MP3 Recovery Tool" DOES NOT stop on a firmware comparison match.
Note: All firmware releases/revisons for the 4/8/6 GB Zen also works (is the same as) for the 2 GB & 32 GB Zen.
Recovery Mode - If you experience one or more of the following symptoms, it is recommended that you boot the player into its unique Recovery Mode, and then clean up, format or reload the firmware.
. The player is not detected in Creative MediaSource or Windows Media Player
2. The battery does not last as expected
3. Your computer stops responding during file transfers
4. There is a power outage during file transfers
5. There is an error about firmware
6. LCD displays a "Firmware Problem" message
7. Your player is not responding.
8. The player is performing erratically.
Getting Started
. Load your Creative Zen software from CD FIRST and BEFORE plugging the Zen MP3 player, using the short cable, into the PC USB port to charge it.
2. Try charging the Zen MP3 player directly from the USB port on the PC. If not, make sure the USB Hub you are using is adequately powered to provide full charging current to the Zen player. Also, try to have the Zen MP3 player as the only USB device, if possible, on the USB hub.
Some/most Creative Zen flash MP3 Music players come "fully discharged" so, in the mean time, just read the manuals.
FULLY charge the Zen MP3 player for several hours (~4.0 hrs max) until the battery symbol is NOT flashing AND the battery symbol/icon has a small plug/key symbol in the middle.
After the first full charge - additional charging is much quicker about 2 /4 hours. (From 0% empty to full)
3. Go to Creative/Support/Downloads and check for the latest software releases for the Creative Zen. Then check on your Zen MP3 player under System/Information for your firmware revision. Make sure you have the latest software downloaded on your PC and firmware on your Zen MP3 player. < Latest revision [.2.0] 28Feb08>
OR
You can run MP3 Player Recovery Tool - see above.
4. In some cases you might have to do the Recovery Mode "paper clip reset" to get the Zen MP3 flash player started.
See the Zen User's Guide FAQ. The paper clip reset hole is on the bottom edge below the music pause/run switch.
(Not the slotted mic hole on the top edge of the player near the earphone jack and SD card slot!!!)
5. My preference is to have the player shutdown/off before inserting and removing the earphone/headphone plug.
Recovery Mode Using The Paper Clip OR
Alternati've Method For Recovery Mode Without The Paper Clip.
Why use it's
If you experience one or more of the following symptoms:
. The player is not detected in Creative MediaSource or Windows Media Player
2. The battery does not last as expected
3. Your computer stops responding during file transfers
4. There is a power outage during file transfers
5. There is an error about firmware
6. LCD displays a "Firmware Problem" message
7. Your player is not responding.
8. The player is performing erratically.
Save a copy of your player's content, if possible, before cleaning up the memory!
Recovery Mode Using The Paper Clip Reset Method
#. Turn off player if not already turned off
#2. Press/hold play/pause button. If you accidentally release
the button, start this reset procedure over again.
#3. Gently push the end of a metal paper clip into the reset hole on
the botton edge below the play/pause switch.
(Do not use the slotted mic hole at the top edge near the earphone jack)
#4. Slide the on/off/lock switch towards the on position - slide it to the botton hold
until the display lights up and then release.
#5. The recovery mode screen appears and four menu items are shown - see below
<Alternati've Method For Recovery Mode Without The Paper Clip>
#. Turn off player if not already turned off
#2. Press/hold play/pause button. If you accidentally release
the button, start this reset procedure over again.
#3. Slide the on/off/lock switch towards the on position - slide it to the botton hold
until the display lights up and then release. Be patient and wait!
#4. The recovery mode screen appears and four menu items are shown:
< Clean Up> - cleans, rebuilds and reorganizes your player's memory and restores it to optimal efficiency.
When the cleanup is complete, select Reboot. Your player restarts and starts rebuilding its music library.
Note: Your player's firmware is reset to default settings after your player's memory is cleaned up.
Note: This procedure the hide/show password is reset.
<2 Format All>- Warning - Formatting your player erases all content on your player's memory and resets your player's firmware to default settings. If possible, back up all data on your player before proceeding.
Also, you can do this from the PC see Zen User's Guide. FAQ
<3 Reload Firmware> - Caution !!!! Selecting Reload Firmware erases your player's firmware.
DO NOT select Reload Firmware unless you have downloaded a newer firmware version for your player, or have been advised to do so by Creative Customer Support.
Note: My advice when loading/replacing firmware is to connect directly
to the PC USB port without using a USB hub.
<4 Reboot> Restarts the player just like the "on/off/lock switch" when switched ON.
Note: Having NO battery energy/charge/juice this procedure will not work.
Lithium-Ion Polymer Battery Hints
Ref:
http://www.omnica.com/omniview_electronics2.htm
http://en.wikipedia.org/wiki/Lithium_ion_battery
. Allow the battery to completely discharge from time-to-time then recharge it fully.
2. Lithium-Ion batteries loses about 5%- 0% capacity per month.
3. Lithium-Ion polymer batteries have about 300-500 discharge/charge cycles.
4. A half full battery indication (50% @ /2 the battery color) used up about 24 hrs worth of battery. Below 50% the indication goes fairly fast to the max of 30 hrs. Note: The battery level indication seems non-linear through out its range.
5. Battery is Empty~0% - warning screen will appear on LCD and player might shutdown.
6. Battery is Full- 00% with battery symbol NOT flashing AND plug/key symbol in the center of the battery.
7. It takes about 2 /4 hours to charge the battery from empty to full.
8. It takes about 4 hours max to charge a "New" Zen player shipped from the factory.
9. There is a battery manufactuer's failure rate, which is normal ~ % or less, in which the Lithium-Ion Polymer battery refuses to charge. Creative, ships the Zen MP3 players with some or no charge so there is very small probability that you could have one. I call it the "Deep Six Discharge Battery" Contact/call Creative for replacement.
Documentation
There are several pieces of documentation you might need to read to fully understand and use your Creative Zen MP3 flash player to its fullest capabilities.
#. Zen Users Guide "English" - For Zen MP3 Player - download from Creative/Support/Product documentation
#2. Zen Quick Users Guide /Front/Back - download from Creative/Support/Product documentation
#3. Sync Manager (Creative Zen) Click on sync symbol on PC task bar then help
#4. Creative Zen Media Explorer - Just look under the main help menu
#5. Windows Media Player <if used>(Microsoft)Use the help files with this program.
General Tips to increase/decrease the playing time on your Creative Zen flash player.
<Creative Battery Spec: 5 Hrs. Video & "UP TO" 30 Hrs. Audio/Songs>
Please do the following:
. Volume control lower/higher - higher volume settings will decrease playing times. This is logical. More output "volume power" decreases the battery juice.
2. Audio Settings: EQ, Smart Vol, & Bass Boost will effect your playing time but I believe they are not critical as the Volume & Bit Rates(28 kbsp and others) / File Format (MP3,WMA) & Lock Switch.
3. Bit Rates & File Formats Do Matter. Bit Rates and File formats will increase/decrease your playing time.
Per Catherina-CL
"WMA files will use up more power than MP3 files, and higher bitrates more so than standard ones (like 28kbps MP3). Best thing to do is rip an album in 28kbps MP3 and leave it playing in a loop on a normal volume level. See how long the battery lasts then."
Please Note: The main difference between MP3 and WMA is the compression. According to Microsoft a 64KBPS WMA file is the same quality 28KBPS MP3. This is of course up to a person's preference but you may find you can get better compression out of WMA.
4. FULLY CHARGE your Zen. This means the battery symbol is NOT flashing AND there is a plug/key symbol embedded within the battery symbol. The battery is 00% FULL under BOTH conditions. Having just the battery symbol all green will not do it.
From the link:
http://www.omnica.com/omniview_electronics2.htm
Regarding lithium-ion shelf life, one of our engineers recently met with a battery-house representati've. It has come to their attention that repeated charging and re-charging of a less than fully discharged Li-ion cell affects the battery "gas gauge" included with many devices. Over a number of cycles there is a resultant loss in accuracy. Frequently, the indicated remaining charge has little relationship to the actual amount of life left in the cell! Fortunately, according to the battery expert, the gauge will reset itself if the battery is allowed to completely discharge from time-to-time.
5. Having different types of earphones/headphones will increase or decrease the playing time by how much "electronic load" the earphones/headphones create on the Zen player. There are some power hungry earphones/headphones out there.
The 6 ohm earbuds conserves battery power more than the 32 ohm earbuds supplied by Creative. (About 0% more)
6. Always, always lock your Zen player while playing music. This cuts off the power drain from the color 2.5" LCD and blank the LCD screen. After all, you can't read the LCD screen if it is in your shirt pocket and playing music!
7. Make sure you have the latest firmware upgrades in order to get the best of your Creative Zen Flash MP3 Player.
Troubleshooting
Your Creative Zen is extremely complex.
Check this link to peek inside player http://www.anythingbutipod.com/archi...isassembly.php
Also, this link:
http://arstechnica.com/journals/hard...ssor-behind-it
There could be a million things that could go wrong with your player so you will not be the FIRST or LAST to have a problem. Keep in mind, there are many, many others that have the Zen with no problems whatsoever. Things happen, but Creative is there to help.
Dropping a Zen or any other player might/will/possibly ruin the player for good!!!
Since this player is solid-state (no moving parts e.g. mini-disk dri've) then the only thing that will keep it from running for years is the non-user replaceable Lithium-Ion battery. I will concentrate on some troubleshooting tips which are battery related but I hope you have already the latest firmware downloaded and installed on your player
Battery - Lithium-Ion Polymer
#. Battery won't charge "out of the box" new player.
A. First, read above "Getting Started"
B. Next, try a different USB mini cable.
C. Next, there is a battery manufactuer's failure rate < %, in which the Lithium-Ion Polymer battery refuses to charge.
Creative, ships the Zen MP3 players with no charge so there is very small probability thatyou could have one.
I call it the "Deep Six Discharge Battery" Call / Contact Creative.
#2. Battery won't charge properly after using the player for some time.
A. When you plug in your player into the USB port via mini USB patch cable, the connection resets the player to the "docked screen" with the battery level gas guage , in the right hand corner.
Sometimes this action does not reset the player properly but there is no indication to you that the player is charging.
Just disconnect/connect the USB cable again.
B. Sometimes, the Zen player gets confused and you have to do a Recovery Mode "paper clip reset" which forces the player into a "special menu screen" to clean-up the player and to reset the player which allows showing the "docked screen" while charging the unit. See Zen User's Guide for explicit instruction und FAQ.
C. Since the Zens came out late in 2007, the maximum of 300-500 charge/discharge should not apply YETbut users beware, as with any other Lithium-Ion Polymer battery it will not charge fully "like new"because of a " fixed shelf life" (2-3 yrs) OR too many charge/discharge cycles. A battery replacement is in order.
Methods of charging the Creative Zen MP3
. The short mini-standard USB cable provided by Creative from the factory. Plugs into a PC USB port.
2. Uni'versal Power Adapter (Creative) plugs into the wall. Works "anywhere in the world"
Note: Different countries have different wall AC voltages and hertz requirements. This has adapters for different countries/locations wall outlets and a uni'versal power supply for all voltage and hertz requirements.
Note: This is a heavy duty high/fast charging wall outlet charging adapter. (2400 ma)
3. Auto/Vehicle 2 VDC charger (Creative) or other compatible vehicle 2 VDC to USB charger.
4. EARHUGGER IPOD POWER POD - MP3-8370 (White compact module)
http://www.earhugger.com/powerPod.html
http://www.amazon.com/Earhugger-MP3-.../dp/B000QTTKSS
This compact module will solve all the following travel modes and conditions:
. Camping, hiking or outdoor travel - no PC or noAC or maybe no auto/car.
2. Airplane travel - no PC or no AC or no auto/car.
3. Train/subway travel - no PC or no auto/car
4. Car travel - no PC or no AC
5. Foot travel - no PC or no AC or no auto/car
It uses 4 ways to charge the Zen:
. Retractable mini-standard USB cord for PC charging. <--- does not communicate with PC! - only for charging
2. Retractable mini USB cord for auto/vehicle charging (Fused)
3. Retractable mini USB cord for wall 0-20 VAC 50/60Hz charging. (non-international use plug style)
4. 9 VDC battery terminal for using standard alkaline 9 VDC or high ma Lithium 9 VDC to charge the Zen via
mini USB cable. Note:You might need several alkaline batteries to charge the internal 550 ma hr Zen battery!
Great for remote destinations.
5. Rechargeable portable battery packs.
Black & Decker has several "Power To Go"models CPI0B-C & CPI20XB (not for international use because of 20 AC 60Hz only charging wall wart)
Note: There are other brands that also do this method of charging.
http://www.blackanddecker.com/Produc...Path=4033.4040
You charge this portable NiMH battery pack from the AC wall outlet so you can carry with you on trips to charge the Zen.
6. Mobile phone chargers. Some have a mini-USB plug for charging the phone but it could be used to charge the Zen BUT BEWARE IT COULD RUIN THE ZEN IF IT IS NOT COMPATIBLE! The output should have a voltage of 5 VDC +- 5% (4.75-5.25 VDC) ON THE PROPER MINI-USB PINS and a charging current at least 200 ma to 2400 ma. See this forum for the recommend phone phone chargers to use with the Zen.
Note: You are charging an internal Lithium-ion polymer 550 mahr battery in the Zen so the lower the charging current the longer it takes to charge.
Note: You will find that charging the Zen from the wall charger is much faster than the "current limited" charging on the standard PC USB port.
Note: For diagnostic purposes and emergency charging of the Zen it is wise to have an external (non-PC) charging device for your Zen.
Note: Only the battery charging symbol shows up on the Zen when using an external charger.
Scratches
All plastic screens will scratch, doesn't matter which type you have.
For minor scratches you could use the Novus three part cleaner, polish and scratch remover system. Do not use the #3 coarse abrasi've in this system! Be extremely careful in using this product !!!! Please check the web.
OR
Low abrasi've toothpase <--- some say this works
OR
CD scratch remover/repair kit <---- have not tried this.
The Zen (Flash) MP3 glass LCD screen is covered by the overlay plastic you see on the front. Worst case, you can have only the outer shell repaired and replaced by Creative.
To prevent scratches in the first place:
Use the Zen cloth bag which comes with the unit (sometimes ) to prevent scratches.
OR
Buy the Zen clear plastic case (Clear Case #70AB2600002). Sold by Creative.< I use this>
OR
Buy an clear plastic overlay. (Screen protector #70AB2600003) which goes over the LCD protector screen for protection. Sold by Creative.
OR
Also, you can cut up a "generic" PDA screen protector to fit the Zen.
OR
Obtain a "digital camera lcd screen protector" from a camera store or internet
OR
"Invisible shield" -The best protection money can buy
http://www.zagg.com/invisibleshield/...ns-shields.php
How to destroy your Zen - WHAT NOT TO DO
. Leave it in the auto/car/vehicle - the vehicle inside heats up 20-35 F higher than the outside temperature.
2. Leave it outside in freezing temperature 0C 32F. The LCD will freeze/discolor/absorb water.
Note: It is remotely possible it could recover when warm-up at room temperature.
Note: Just keep the Zen near your body heat when outside in freezing temperatures.
3. Dropping it might cause the LCD screen to crack or loosen up the internal connections to the electronics or short out the internal electronics.
Note: Use a protecti've case to cushion the blow from dropping the Zen.
4. Dropping or submerging or getting the Zen wet in water might short out the electronics and battery.
You could prevent destruction by immediately shaking the Zen vigorously in open air to dry it out.
5. Sitting on it could flex the electronics and short or open circuits which would cause a defecti've/faulty Zen.
<A bit of humor ... There is No Santa Claus, Easter Bunny or Tooth fairy and Creative does NOT give away money. If you destroy or damage your Zen you will pay not Creative>
How can you tell if your Zen is defecti've/faulty
. A "white screen" or a "totally blank black screen" shows up on the Zen LCD.
2. You cannot force the Zen into the special "Recovery Mode" menu screen.
3. The Zen refuses to "take a charge"(To charge up the internal Lithium-Ion Polymer battery)
4. The Zen LCD is cracked or distorted due to dropping or handling abuse.
5. The Zen clock does not keep accurate time (within 2 mins max per month)
Contact Creative if any of the above faults occur - the Zen is bad and nothing you can do will fix it!
WSOD "White Screen of Death"
The "White Screen of Death" is really caused by a hardware problem. You see, the internal Freescale/SigmaTel STMP3700 MP3 processor has to write to the LCD. If this operation is prevented by internal electronic opens or shorts, bad STMP3700, locked-up firmware, bad LCD or any other electronic component failure then the CPU might/will halt and refuse to write to the LCD which will be reflected in a "white screen of death" I cannot cover all the causes of the "white screen of death" but rest assured Creative should pick these problems up in their quality control manufacturing process with a 99% success rate. Problems do show up after the manufacturing process but Creative has warranty protection for this other % fault rate. (Which is normal in electronics manufacturing)
Media Content
Listening to the built-in music on the Zen is OK but after a while your question now becomes "What else can I do with my Zen "
Note: The "How to" instructions for adding Media content can be found in the Zen documentation.
Terminology:
Album: Collection of tracks or songs under one "album" title.
Artist: Track or song artist
DRM: Digital rights management - copy protection scheme - Zen cannot use music with this music protection scheme. (itunes) (But "itunes plus" will work)
Genres: Type or kind of music
<The following genres are defined in ID3v>
Blues,Classic Rock,Country,Dance,Disco,Funk,Grunge,Hip-Hop,Jazz,Metal,New Age,Oldies,Other,Pop,
R&B,Rap,Reggae,Rock,Techno,Industrial,Alternati've ,Ska,Death Metal,Pranks,Soundtrack,Euro-Techno,
Ambient,Trip-Hop,Vocal,Jazz+Funk,Fusion,Trance,Classical,Instru mental,Acid,House,Game,Sound Clip,
Gospel,Noise,AlternRock,Bass,Soul,Punk,Space,Medit ati've,Instrumental Pop,Instrumental Rock,
Ethnic,Gothic,Darkwave,Techno-Industrial,Electronic,Pop-Folk,Eurodance,Dream,Southern Rock,
Comedy,Cult,Gangsta,Top 40,Christian Rap,Pop/Funk,Jungle,Nati've American,Cabaret,New Wave,
Psychadelic,Rave,Showtunes,Trailer,Lo-Fi,Tribal,Acid Punk,Acid Jazz,Polka,Retro,Musical,Rock & Roll,
Hard Rock
<The following genres are Winamp extensions>
Folk,Folk-Rock,National Folk,Swing,Fast Fusion,Bebob,Latin,Revival,Celtic,Bluegrass,Avantg arde,
Gothic Rock,Progressi've Rock,Psychedelic Rock,Symphonic Rock,Slow Rock,Big Band,Chorus,
Easy Listening,Acoustic,Humour,Speech,Chanson,Opera,Cha mber Music,Sonata,Symphony,
Booty Bass,Primus,Porn Groove,Satire,Slow Jam,Club,Tango,Samba,Folklore,Ballad,Power Ballad,
Rhythmic Soul,Freestyle,Duet,Punk Rock,Drum Solo,A capella,Euro-House,Dance Hall
<A bit of humor: I think the above Genres lists are missing two - "elevator music" & Crying and Whining e.g. Country Western>
ID3 Tags: Internal file information associated with an Mp3 or wav audio file. This format contains
Track number, Album name/title, Genre, Artist and Song Title which can be sorted and indexed by
the Zen device.
IPTV: Is a system where a digital television service is deli'vered using Internet Protocol over a network infrastructure, which may include deli'very by a broadband connection. http://zencast.com/
JPEG: Is a commonly used method of compression for photographic images.
This is the only photo format used by the Zen.
MP3 and WMA music tracks: Music format used by the Zen.
Note: Having the wrong bit rates will drain the Zen battery faster. (See above)
MP3: Is a digital audio encoding format using a form of lossy data compression.
Non-protected AAC: Files are regular AAC files without any DRM: they can be converted to other formats (like MP3) and can be played on an unlimited amount of devices and burned an unlimitd amount of times. They have no restrictions.
Podcast: Is a series of digital-media files which are distributed over the Internet using syndication feeds for playback on portable media players and computers. http://zencast.com/
Protected AAC: Files are AAC audio files that contain DRM (Digital Rights Management), most often music purchased from the iTunes store. The Creative Zen cannot use these files.
Note: "Itunes Plus Store" have songs without DRM which the Zen can use.
Ripping CDs: Copying tracks from an audio CD on a PC and downloading tracks to the Zen.
Note: Use the Creative Zen Media Explorer for ripping audio CD is one method.
Song Title: Name of song or track
Track Number: Numerical number of track of CD album.
Track: General name for song or song title.
Unprotected AAC format: Music format used by the Zen
WMA:Is an audio data compression technology developed by Microsoft. The name can be used to refer to its audio file format or its audio codecs.
WAV: (or WAVE), short for Waveform audio format, is a Microsoft and IBM audio file format standard for storing an audio bitstream on PCs.
Note: The Zen's built-in microphone produces this audio file format.
Zen Audio Format:MP3, WMA, WAV, non-protected AAC (.m4a), Audible (2, 3, 4)
Zen Media Content: Video, Music, Audio, Photos/Images transferred/dowloaded into the Zen
Zen Photo Format:JPEG
Note: You can copy/drag/paste JPEG photos from your PC to your Zen for viewing.
Note: You can import photos & view photos from the SD card.
Zencast Organizer: Seamlessly integrates ZENcast media files with Creative portable media players and/or your computer
Zen Video Format:MJPEG, WMV9 and (with transcoding - MPED4-SP, DivX 4/5 and XviD)
Warning - In some countries (including the US) its illegal to do:
Copying audio DVD & DVDs
Defeating DRM MP3 Music (Digital Rights Management)
Intercepting/copying (non purchased) music.
Downloading music/songs from an illegal or "free" rouge website.
General Media Content links:
http://pro-music.org/Content/GetMusi...lineStores.php
Note: Check to see if your music files/tracks contains ID3 tags.
Note: ZEN also supports iTunes Plus tracks from the iTunes store,
Note: The following media content is only a small fraction of means and ways
of collecting/dowloading media content to the Zen.
Media Content from Creative Website(s)
Note: The Media Content can be found under "Fill your Zen" on the bottom of the Creative Zen product page.
http://zencast.com/
ZENcast is the ultimate source for free IPTV channels, video blogs and podcasts on the Internet. It provides quick and easy access to a wide range of interesting and entertaining video and audio content online.
http://www.audible.com/adbl/site/cre...seBVCookie=Yes
Audible.com - Audible.comis the Internet s leading audio provider of bestselling audio books, comedy programs and today s most relevant magazines and newspapers
http://creative.vongo.com/
VONGO is the video download service that gives you instant access to over 2500 hit movie and video selections from Starz .
Watch movies whenever, wherever on your ZEN. A great entertainment venue for watching movies while on the road or on the go.
http://www.napster.com/creative/
Transfer unlimited music to your ZEN without paying per song.
With Napster To Go you can:
Choose from over 5 million songs, plus new releases every week
Play music instantly from any internet-connected computer
Find old favorites and discover new music by exploring playlists, radio, Billboard charts and more
Create a library of your favorite music and build custom playlists.
http://www.emusic.com/ZEN
Choose from over ,500,000 songs
Burn unlimited CDs
Compatible with every MP3 player
No confusing restrictions-Own your music!
http://www.lala.com/frontend/action/...=user:2672@223
Why pay 99per song when you can get the whole album for $At lala.com, you can trade your used CDs for new music.
.8 million titles available for trade. CD quality guaranteed.
Every CD you receive is yours to keep - no restrictions.
Pay only $ per CD received. No monthly fees or commitments. Sign up is FREE.
http://www.amazon.com/b/ &node=62663
Buy or Rent Movies Online
Watch DVD-quality video downloads on your PC or ZEN
Conveniently download from your PC at work to your PC at home
Discover thousands of TV shows & movies available for download
I started this thread in April 08 to help other new Creative Zen MP3 (Flash) users. If there are common threads that are posted from new users then I try to make a section to inform other new users in solving their similar problems. I cannot believe that this thread was viewed over 0,000 times! Thank you for your "viewing" support.
Please note: This thread is constantly changing so check back for any new helpful hints, problem solving, troubleshooting and practical solutions for the Creative Zen.
"The Creative ZenR O C K S"
Zenandy
Message Edited by Zenandy on 08--2008 08:26 AM

Hi,
I'm from germany so no 'best buy' but I think I will lock around sleeve/bag for a different product with same measures. Any tip?
The clear plastic case is not what I want. I would like to use the player without such protections. I just want a sleeve to protect the player while its in my jacket/pants.
Btw, i have bought this version: Creative Zen (maybe european version?). I also doesn't seem to have your mentioned sleeve. I also couldn't find it on the website.
Anyway, thank you,
Chris

Is there any possibility to find my lost serialnumber for new installing the adobe creative suite?

Is there any possibility to find my lost serialnumber for new installing the adobe creative suite?

The new serial number for :
Product Name ADOBE DESIGN STANDARD
Product Description SNL,DSGN,5.5,WIN,ED,D
Platform Windows
Version 5.5
Language German
I have send it to you by personal message. You had recently contacted Adobe & requested for it.
Regards
Rajshree

TS3694 1015 ? I'm trying to update my iPhone 3 and get this error message. The phone belonged to my wife, and I'm trying to restore it to factory settings as new owner. Any ideas?

1015 ? I'm trying to update my iPhone 3 and get this error message. The phone belonged to my wife, and I'm trying to restore it to factory settings as new owner. Any ideas?

Before beginning the download, try temporarily disabling your antivirus, anti-adware, anti-spyware, and any other anti-whatever that is required with the secure OS your computer is running.

How to prepare MacBook for new owner?

I'm selling my Intel MacBook Pro and I would like to restore it to factory-new condition for the new owner.
I know how to install OS X from the included discs, but after the installation it launches right into the first-time setup (name, registration, network configuration, etc.).
I don't want to do this setup — that's information for the new owner to key in. But I see no way to exit out of it gracefully, so should I just power down the machine at this point? I assume the next time it's started (by the new owner) it will simply try the first-time setup again.
Is there a more graceful way to exit the installation and shut down the machine without doing the first-time setup?
Thanks.

Wow, this is really great. Exactly what I was looking for, except that I'm not sure I have another volume (e.g., FireWire drive) I can boot from to delete the administrator account.
If the timing works out such that my new laptop arrives before I have to ship the old one, then I'll be all set.
Thanks.

PCUI 4.0, Search Help Required for New field

Hi everyone
I am working in CRM 4.0 Sales Order application
We created a new field in CRM sales Order in Header level in SAP GUI through EEWB.
The search help for the new field is working fine in SAP GUI. We want to add the same field with F4 help functionaliity in PCUI as well.
The field has been added in structure CRMT_BSP_SLS_OD1_General. It also shows domain value for the field however Origin of input field ie empty
The field has been added in PCUI and is successfully showing data inputted in SAPGUI
However we need search help functionality for the field
i tried these two steps
1) i checked on domain value checkbox and changed the field from input to dropdown. However the dropdown is empty in PCUI. Whenever i check box domain values for some field then all the possible values in SPA GUI are displayed in PCUI, however this is not working here.
2) I put Value_table in F4 of the field
This is also throwing up empty values
Am i missing something in this case
Please let me know how to go about it
TIA
Asad

Hi Frederic
Thanks for your response
I am not sure what is meant by regenerating the field group in this case
I added the entries for my view in the field group and generated the layout of the field group (If this is what you mean)
The field is working fine. I am able to save values to the field and able to see values saved in GUI.
I haven't linked search help of the field in PCUI
I am not sure how to go about it.
I used the data element in the structure for the field.
The data element has Domain entry in <b>Entry Help/Check</b> of the structure
If i check the Domain Value checkbox in my field group then the domain values should be available in dropdown if the field is dropdown
However i am not able to see the possible values of the field (It is present in SAP GUI)
Does something else needs to be done in this case
TIA
Asad

Erase and Install.. Is it now ready for new owner?

1 )   Hello, i think i saw the answer to my question in a previous post but as it is the first time i have installed a system i would like to make sure i understand properly. I am preparing a computer for sale or giveaway. At the end of the installation it carries on to the Welcome /Registration process, i presume it is at that point i stop, which i did, what baffled me was that there was no way to exit the page and no way to shut the computer down. I turned it off at the power button, is it ok now to pull the plug? And when it is turned back on will it start at the Welcome page and the new owner go on from there?
2 ) Before doing the Erase and Install i had a play around with removing my account. I deleted all private data and browsing history and anything i could find to delete, disabled auto login then i set up a fictitious account and used the admin rights given to that account to remove my proper account. That was all good except when the computer started again it still displayed my name on the panel that comes up saying e.g Joe Bloggs computer.   Is there a way to remove my name from that panel ?   The reason i ask is that a computer can be given away with the OS still in it ready to use with previous details removed but the new owner wouldn't want to see a previous owners name come up.( It didn't appear on the accounts page)
The name must have been put in during the configuration process, how or at what point do i avoid it or perhaps choose just to enter something general such as " my computer" ?    Thanks .

Gidday or i should say good evening.. i didn't leave a computer behind(?)... Before i did the Erase and Install i had as i described it a "play around". I think it was at that point my name still appeared on the start up pane. Then i put the disc in and yes the first time it was just an Upgrade ( i didn't realise) 10.3 to 10.4. I had a look and found the option to Erase and Install which has been done, it will have erased my name but that wasn't the first question... there was no way to exit the Welcome process so do i just pull the plug (its currently just been turned off at the machine itself) leaving it at that point of Welcome/ Registration, and is it now ready to go to a new owner?
As to the other query i am just curious to know if is there a way to remove the name from that pane? I presume i filled in the name somewhere during the Welcome process.
Yes i am aware that recovery can be done and that Erasing etc is the safest way but there was nothing to be of concern on the computer. I wasn't even doing internet banking back on the 10.3.       I have 3 eMacs and will be keeping the other two.

Erase HD for new owner?

I'm giving my old MacBook Pro to my daughter. I want to give it to her "like new," so she can set it up the way she wants it. In Disk Utility, the option to erase is greyed out. Any suggestions? Thanks!

Clean Install of Snow Leopard
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
     5. If you are planning to sell or give your computer away, then do the following:
        After you reformat your hard drive and reinstall OS X, the computer restarts to a
        Welcome screen and asks you to choose a country or region. If you want to leave
        the Mac in an out-of-box state, don't continue with the setup of your system. Instead,
        press Command-Q to shut down the Mac. When the new owner turns on the Mac,
        the Setup Assistant will guide them through the setup process.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
If this computer came with Lion or later pre-installed:
What to do before selling or giving away your Mac - Apple Support
Follow the initial steps in this link to be sure you have signed out of your iCloud account, etc.

Helpful advice for new high definition camcorder owner

I recently purchased a new camcorder to record games for our high school basketball team. (Canon vixia HF R10) I have been playing around with the settings to find the best setting for recording fast moving action. Any advice on settings?

classact wrote:
I recently purchased a new camcorder to record games for our high school basketball team. (Canon vixia HF R10) I have been playing around with the settings to find the best setting for recording fast moving action. Any advice on settings?
Really for a camcorder there isn't anything special. Only things I can think of are:
1) Make sure you do not use any modes (such as "night mode") that can potentially drop the framerate below normal.
2) You probably have the option of 24p and 30p framerate modes - choose 30p for sports.
That's basically it for video.
For still pictures, it's all about the fastest shutter speed, but for video - not important as long as your shutter speed doesn't go so slow as to reduce the framerate.
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

Help needed for new project

Dear members
I am looking for a developer who can help me (rebuild) and
administrative back-end based on an existing MS SQL database in
either PHP or ASP classic.
I am pretty much a novice, more a designer than a programmer
but know my way around DW and some ASP code, I am new to PHP. I do
have experience with building databases, not much however with
building databases for e-commerce purposes.
I purchased WebAssist E-Commerce Suite if someone knows what
it is and work with DW MX 2004 on a Windows XP Professional SP2 m
achine.
I am not asking for free help but help me get the job done.
There is a time frame and the money I can spent on help is not
unlimited.
Pref. someone in Europe who I can keep in contact with via
MSN Messenger and/or Skype.
I can build myself the insert, update and delete pages on
various tables.
However certain things are unclear to me wether they are
absolutely a nescessity or can be done without.
Please if you have the time and not looking for a fast buck..
contact me.
Yours sincerely
Anthony

Hi,
I did a project on jsp and EJB called Dataminig implemented in Online shopping. Dataminig is an upcomming technology for Customer Relationship management. You can also do some kinda project like online patient monitering. In this project you can even see how to communicate through COM port.

Flash Builder - No Code Hinting For New Flash Professional Project??

I had been using flash builder as an as3 editor and compiling from flash builder. The Flash Professional Project in Flash Builder seems perfect. It will give me the flexibility to compile from Flash Professional, or compile from the flex sdk, use breakpoints, have all my files nicely in the package explorer.
However, it has been a terrible terrible experience. For some reason code hinting is completely turned off on all levels in Flash Professional Projects. I have been looking in every preference panel trying to figure out why this is happening. If it is actually the case that you get no code hinting whatsoever then they really should not have even bothered adding this into Flash Builder because coding in this fashion is a joke.
However, I am still optimistic about it. Can someone help me turn on code hinting?

Ok. Solved it. The issue was that we were using linked source code and library swcs that were all located under the same directory. When you pull up the project's properties and go to "Flex Build Path" under the "Source Path" tab you can add that directory without a problem. However, under the "Library Path" instead of just adding the directory, I added each swc individually and that solved my problem. Now all the code hinting is working perfectly.

Help needed for new (and confused) BT Infinity cus...

Hi,
I upgraded to BT infinity from the normal broadband 3 days ago after being told on the phone my speeds would increase to 38mpbs on the download and the upload would rise up to 10mbps. I have waited the recommended 3 days stabilisation period and currently the download speed is around 17mbps and the upload is barely 1.5mbps. I have tried various methods to try and fix this but with no joy, any help or advice would be greatly, oh so greatly appreciated.
Thanks

Can you post your line stats from the HH5 please? These are in Troubleshooting/Helpdesk on the web interface at http://192.168.1.254
Lines 1-13 will be enough
If you found this post helpful, please click on the star on the left
If not, I'll try again

Exchange Retention Policy Tag for Voicemails - worked for UM but not for new Cisco Unity - Any ideas?

Hi All,
We're in the process of moving from Unified Messaging to Cisco Unity. In the past, I had successfully applied the following Retention Policy Tag which worked with UM:
New-RetentionPolicyTag "Voice Mail 60 Day Retention" -Type All -MessageClass voicemail -Comment "Untagged messages removed after 60 days." -RetentionEnabled $true -AgeLimitForRetention 60 -RetentionAction DeleteAndAllowRecovery
Now, with Cisco Unity, I see that the voicemails show "Expires: Never."
The Cisco voicemails differ from UM in that instead of being *.mp3 files, they are *.wav.
I cannot figure out a way to create a Retention Policy tag that deletes a specific file type. Any ideas?
Thank you,
MrMister

Hi All,
We're in the process of moving from Unified Messaging to Cisco Unity. In the past, I had successfully applied the following Retention Policy Tag which worked with UM:
New-RetentionPolicyTag "Voice Mail 60 Day Retention" -Type All -MessageClass voicemail -Comment "Untagged messages removed after 60 days." -RetentionEnabled $true -AgeLimitForRetention 60 -RetentionAction DeleteAndAllowRecovery
Now, with Cisco Unity, I see that the voicemails show "Expires: Never."
The Cisco voicemails differ from UM in that instead of being *.mp3 files, they are *.wav.
I cannot figure out a way to create a Retention Policy tag that deletes a specific file type. Any ideas?
Thank you,
MrMister
Those don't exist. The tags work on message class. The Cisco VMs are not the same forms as the Exchange UMs essentially.
Twitter!:
Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

6110 Help needed for new maps!

Hello,
I have a 6110 Nav with pre-loaded, maps of Greece and the Balkans on the supplied 512mb card, but I need maps of Italy, France, Germany, UK as well. Is there a package you would recommend I download from Nokia or Route66 for this need? How do I do this??
Also, I have a new 1 Gig MicroSD card, will I need a bigger one?
Lastly, Will I still be able to use my maps for Greece and Balkans if I download additional maps?
Thank you in advance,
Jasvox

it IS true. the maps are there. install route 66 sync software (delivered with your mobile phone on a dvd), it will ask for an update, install that, select in the route 66 sync software "r66 store", select maps, go to europe, and there you get the "Western Europe" map (costs 99,99 euro, 1,64gb, withouth nordics!) or "Western Europe with Nordics (also costs of 99,99euro, 1,78gb, with nordics). so better get with nordics. you will need at least 2gb card anyway...
but currently route 66 got problems, as they did not link the maps correctly last friday. the "Western Europe with Nordics" is in fact the map without nordics (1,64gb, download interrupted at 92-94%), not clear yet what the map "Western Europe (without nordics)" really is.
as western europe with or without nordics does NOT include greece and baltics, you may also need to get that map, or it may work with your old map together (therefore, i guess you need a card larger than 2gb, or you get western europe without nordics, i do not know the size of the greece/baltics map). but that may fit on a 2 gb card. cards of size up to 8gb are supported (and more)
anyway, to make those maps work, you need to update your mobile phone to firmware 4.22.
guess route66 will fix those wrong linked maps soon.
Message Edited by laxlex on 04-Feb-2008 10:11 AM

Help Request for new developer

How to calculate sum of formula column to print at break level and how to re intialize for sum of next group in oracle reports.
Thanks

Hi ,
What have you tried ...????
You should consult the Oracle Reports on-line help..It directs you step-by-step to accomplish it...
However , you should post this to :Reports
Greetings...
Sim

Helpful hint for new owners of any creative player.

Similar Messages

Maybe you are looking for