Helpful tip for using Windows computers w/Airport Extreme
Not sure if this has been posted before but I would suggest that windows users or mixed use users (windows/mac) that want to use the airport extreme basestation should uninstall any security software (antivirus/firewall) that is on their windows computers before setting up the Airport Extreme Basestation.
I was having a lot of trouble getting my windows computers to see each other (or any other computers for that matter) despite them being able to connect to the internet and the fact that they were both on the same workgroup.
I figured out that by uninstalling the norton software and then replugging them into the basestation that miraculously I could then see the other computers on the network ("view computers in my workgroup"). Then reinstall the security software and you should be good to go.
Hope that helps someone and prevents hours of frustration.
Now that I have the Airport Extreme basestation running it is phenomenal. All computers (mac and windows) can see each other and share files.
There is another way to use the AE.. that might help your problem.
The first thing though is to use static IP .. even in bridge that might fix it.
You would need to use DHCP Reservation in the main router to set the IP of the Airport. This can be called different names in different devices but it is usually there.
Then in the computer using finder, Go, Connect to server. Type in the actual IP address of the Airport.
So
AFP://10.0.1.100 (for example, replace with the actual IP).
You will have a request for the disk password.. once the computer finds the network resource. Type in the password and store it in the keychain so it is not forgotten.
I do find it interesting that apple can acknowledge that networking is that poor.. and do nothing about it.
Similar Messages
-
Help required for set up of new Airport Extreme!
I bought a new Airport Extreme and was assured the set up was super easy compared to the Linksys wireless router I had previously. With my luck, it isn't!
I basically never get to the first step of the airport utility because either the wireless connection can't be found, or the Airport Express can't be found by my computer (I get either of the two error messages). I am able to see the airport xxxxxxx network, but get the error messages even when the computer's airport eventually connects to it. Can someone help and tell me what I am doing wrong? I have tried resetting my internet modem and the Airport Extreme to no avail, I always get the yellow amber flashing light.
Thank youSEE MY ANSWERS BELOW:
System Preferences > Network > AirPort > Advanced > AirPort tab
o Your network should show up in the list under Preferred Networks with Security = None CHECK
o Remember any network this computer has joined (checked)
System Preferences > Network > AirPort > Advanced > TCP/IP tab
o Configure IPv4 = Using DHCP CHECK - CHANGED IT
o Configure IPv6 Automatically CHECK - CHANGED IT
System Preferences > Network > AirPort > Advanced > DNS tab
o DNS Servers = (your ISP's DNS server(s) IP address(es) should be displayed here) If this is blank, may be the reason that you are not able to access the Internet when connected wirelessly ... and may indicate a problem with the AirPort card in your iBook I CAN SEE 3 SERIES OF CODES
Following this, I can still find my network, connect to it (although I got a timeout the first couple of times) but still have no internet access. The airport has been working fine when I was using the Linksys in the past.
Can we try anything else? -
Hi...
My name is Turgay and have been using computer since 1982... 2 years ago, because of my friend's advice, i bought an iMac... It was the first Mac that i use... Till that, i was using normal PC's...
I bought an 24" iMac on July 2009 and started to use... I realized that i spent my 27 years for using (fixing) computers. Because the Mac was perfect. After iMac, i was really fine with my computer... But after something, that doesn't bother me, happened. The screen started to get cloudy and black... And it increased. Because of this i took my iMac to your authorised distributor http://www.bilkom.com.tr...
They changed my screen but in 2 months it happened 3 times and i wanted them to change my iMac with new one, under customer laws... In our country, the device must be changed with new one if the same problem occurs in 3 months. Because i know the customer satisfaction of Apple, i didn' worry about it but Bilkom refused my will... I spoke with them for 2 months but nothing happened, they just told me, it' not our problem.
Because of this speech, i sued them on June 2011... Last week, i won the case but just for the return of invoince... It costs 3.200 Turkish Liras (1.800$) and there's no 24" iMac unused... Bilkom again refused to give me an iMac... I thought that Apple's customer satisfaction can't be like this... I didn't write anything to Apple till now but if i can't get an iMac, i must return to normal PC after 2 years... And i don't want that... I offered an iMac 27" with core i7... No matter Bilkom accepts or not, they don't care of me... I'm a customer, they should do... I've never seen such a like company. I hope the real Apple will help my problem and save me from Bilkom...
Waiting for your reply... Thanks and regards...
Turgay Kala
General ManagerUnfortunately, you are not communicating with Apple here - we are all other users volunteering our time to help with technical problems.
Here is a list of Apple contacts; there is no email address - you will need to write a letter to their corporate headquarters or call them:
http://www.apple.com/contact/
Although, it appears that your problem is with a third party store and that you have won in court - did you get your money back? 24" iMacs have not been made since 2009 or 2010. Now there are 21" and 27" iMacs. -
Prerequisites for Using Windows NTLM Authentication
Hi,
One of the prerequisites for using Windows NTLM Authentication, mentioned on help.sap.com documentation, is:
- The users Web browser must be a Microsoft Internet Explorer
This means that users not using Internet Explorer cant authenticate using other web browser (Firefox and Netscape).
In PAM, SAP says that web browser based on mozzila 1.7.x is also supported, and from this version on, Firefox and Netscape, both, support NTLM.
NTLM Authentication in portal, still be supported with IE web browser?
Thanks and Regards,
PaulHi Paul,
I suspect that although it may not be officially supported, it will work. The main thing is that a frontend web server perform the NTLM authentication and pass the header variable back to the J2EE engine. By the time the header gets back to the J2EE engine, I dont think the portal has any idea how the header REMOTE_USER was generated, just that it was.
Not positive though, as I havent tested the scenario you describe below..just thought I'd throw in my two cents.
Marty -
Is it possible to use time capsule or airport extreme as a wireless hard drive for iphone?
Is it possible to use time capsule or airport extreme as a wireless hard drive for iphone.
I would like to strem movies from the hard drive to iphone.
I have already seen the Goflex Stellite, which works this way.
Is there any other device that could do this?I did a typo. My current computer is a 2010 1/2 iMac. The stand alone monitors are still out of my price range so I'm looking for other options. By buying an external hard drive and a broken iMac, I'm still ahead. Still, if I understand you right, the 27" 2010 and earlier iMacs would be possiblities.
Are there adapters that would allow me to run a 2011 and newer iMac as an external monitor from my 2010 1/2. There are so many adapters out there these days. -
Tips for using Galil Tools with Labview
This post is not a question, but below is a link to Galil's site that provides various methods and tips for using Galil's software for communicating with their controllers using LabVIEW. Hopefully it will assist others in the future.
http://www.galilmc.com/techtalk/software/using-labview-with-the-galiltools-communication-library/
Enjoy!
-AK2DM
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~Thank you very much!
This is the information I was looking for. -
Can I boost the DSL signal using my 1st Generation Airport Extreme or Express?
I just moved into a house where they have ATT DSL and it is really slow in my room. I am hoping that I don't have to purchase a booster and I might be able to use my Airport Extreme or Express to boost it. I don't think they want my Extreme as their router, though. They are PC.
I am also hoping that I can set up a wireless printing situation in my room using the Express or Extreme.
I am running 10.4.11 on my old MacBook Pro laptop, 10.5.something on my old desktop (MacMini).
Thanks for any help ahead of time,
CaroleCan I boost the DSL signal using my 1st Generation Airport Extreme or Express?
I just moved into a house where they have ATT DSL and it is really slow in my room. I am hoping that I don't have to purchase a booster and I might be able to use my Airport Extreme or Express to boost it.
Unfortunately, this won't work especially if you want the connection between the routers to be wireless. The two are just not compatible for configuring an extended network. However, it could work if you can have them interconnected by wire. In that case, you could configure them into a roaming network.
I don't think they want my Extreme as their router, though. They are PC.
This shouldn't be an issue as the AirPorts support wireless clients regardless of which operating system they are running. -
I am having problems setting up airport extreme.
What ADSL modem do you advise to use with my new airport extreme? I have tried a basic TP-Link ADSL2+ modem and I can't get the configuration working. What modem does Apple recommend?Ok well I have looked around some more and have found this to be the most up to date official response to my question as seen at this link here:
http://www.actiontec.com/support/product_details.php?pid=41#q27
Can I Bridge the Actiontec MI424WR router that Verizon provided, when I signed up for FiOS service?
The MI424WR does not have a bridging option, and neither Verizon nor Actiontec support attempting to bridge it.
The desire to bridge the MI424WR is based on a misunderstanding that it is a modem as well as a router. Actiontec does produce DSL Gateways that have a Transparent-Bridging option, which bypasses or disables the router function and allows the Gateway to act simply as a DSL modem, when it is enabled. Many consumers do not realize that with FiOS, the ONT (typically outside the home) is the device that handles changing the FiOS signal from Fiber to either Ethernet or Coax, and that the Router is just a Router, and if it was bridged or bypassed, it would be a device without a function. For most Verizon FiOS customers their service would completely stop if the MI424WR was bridged, because the Video on Demand service is dependent on it to work.
If your ONT is connected to the Actiontec MI424WR router via Coax, the MI424WR is required due to the Coax connection. But if the ONT is connected to the MI424WR via Ethernet, then in most cases some other router can be substituted for the MI424WR, and it can be removed."
So it looks like I will be calling Verizon support to see about getting the Ethernet connection installed and getting another modem... -
Can I use my iPad with airport extreme to retrieve files from a USB connected hard drive?
Can I use my iPad with airport extreme to retrieve files from a USB connected hard drive?
Yes, I believe so. Please check out the NetPortal app. I don't have an iPad, but I use it on my iPod Touch to access files on my Time Capsule. It is available from the iTunes App Store.
-
What type of repeater should I use with my new Airport Extreme?
what type of repeater should I use with my new Airport Extreme? Thanks.
If you want to repeat both bands of your dual band AirPort Extreme, another AirPort Extreme would meet these requirements.
If you only need to extend one of the bands that the AriPort Extreme provides, then an Airport Express would do that nicely. -
Can i use my old round airport extreme as a WiFi extension?
i have my new airport extreme plugged into the modem via ethernet and wish to extend its WiFi network in my house using the older round airport extreme.
is this possible, and if so how do i configure this?
thanks all - TIt will depend on if this "older round" AirPort is an 802.11b or 802.11g model. If it is an 802.11g version, then yes you could use it to create a WDS extended network.
-
What is the default ip address for the Time Capsule and Airport Extreme?
What is the default ip address for the Time Capsule and Airport Extreme?
Open Airport Utility to find out the real IP address of the network connection. DHCP addresses are assigned by the router in the range chosen in Airport Utility.
-
Can't connect Windows computers to Airport Network/Base Station
I'm looking for some help with my Airport Extreme. I presently have it set up and working on my MAC. I can connect to the internet with no problem. But when I have tried to allow 2 family members to connect their windows computers to the internet (I give them the WPA2 key, etc...) using our wireless network they are unable to do so. Their computers detect our wireless network but when they type in the key it gets stuck "acquiring the network address". Any ideas what's happening? I greatly appreciate your help.
I suggest using the following instructions to re-check your AirPort Extreme Card/Antenna cable installation in your G4 iMac just to be sure nothing was missed: iMac (17-inch 1GHz) and iMac (USB 2.0): Customer-Installable Parts Instructions
Also, check that the antenna cable is firmly attached per this Apple Article: http://docs.info.apple.com/article.html?artnum=108039
I have the base station connected to a pc so I can't download iStumbler.
For the PC, you can use NetStumbler instead.
I'm not sure how to check if a signal is being sent through Airport utility.
Instead of the AirPort Utility, you can use the Internet Connection utility to verify signal strength of your base station. To access this utility, just right-click the AirPort status icon in the menu bar, and then, select it from the drop-down menu. -
Can two macs use same disk for Time Machine backup with Airport Extreme?
Hi
I use a Western Digital disk as a wireless Time Machine backup connected to the USB port on my Airport Extreme and it works great. My question is: can my girlfriend use that same disk for Time Machine backup from HER computer too? (I don't mind formatting the disk if needed.)
If she can't, is it then possible to connect a USB hub and have two disks hooked up to the Airport Extreme?
Thanks for helping. I am constantly in awe of all the help people like you give people like me. Thanks!!!
JakobI've gone through the manual setup and the assisted setup and can't seem to get my MacBook to use the Time Machine. Any thoughts or help would be greatly appreciated.
Well, as the Jolly Giant points out....+this type of configuration is not supported by Apple+, so it's difficult, if not impossible, to provide a fix for something that Apple says that you cannot do. Reference these Apple Support documents regarding this topic:
http://support.apple.com/kb/HT2038
http://docs.info.apple.com/article.html?path=Mac/10.6/en/15139.html
Your situation is not unlike other users who try this and find that one computer may backup...(usually for a limited time before corruption issues start to creep in)...but another computer cannot backup. Count me as one of those users who thought that because things seemed to work that I had somehow "beat the system".
I started getting the corruption error messages after 4-5 weeks of successful backups, so I figured that it did not make sense to continue to try to get a second computer to backup (yes, I too could not setup a second Mac to backup).
Sorry, I could not get a second machine to backup, so can't tell you how to accomplish that goal. If you want to continue to try backing up this way, you might want to also think about a second backup strategy...just in case backups become corrupted on the WD drive.
Maybe if Apple says you cannot do this, they just may be right?
Message was edited by: Bob Timmons -
Proper setup for using two computers and backup drives?
I've just purchased Aperture 3 and want to fix a longstanding problem I've had with my workflow and setup in Lightroom. I've got an iMac and a MBP and what I'd like to do is use the iMac as my main computer for Aperture. My plan is to import my existing files into Aperture and copy them to an external (non-portable) hard drive for back-up purposes. Based on this, I'd have two copies of each file, one each on the iMac and the back-up drive, right?
I also use my MBP for a lot of photo editing work while on the road, but don't have a lot of drive space on it. I've bought a 750GB hard drive and I'd like to have the Library on this drive as well for use on the MBP. I know this would give me three copies of each file, but it would also give me some peace of mind in the event I somehow lost the info on the 750GB drive. I don't want copies of the images on the MBP directly as I don't have enough space.
Can this setup be "easily" done and if I make a change in an image on one computer will it be synchronized between the two computers and the two external hard drives? I guess in plain English, what I'd like to achieve is the ability to work on either computer and have the most recent versions synchronize when I attach the 750GB drive to the iMac, with the non-portable external drive as the back-up for the synchronized Library.
Thanks in advance for any help,
KevinNo, vaults only look after a managed library. A referenced library has to be backed up manually.
There are a few reasons i prefer to use a referenced set up. I use a MBPro on the road for long periods and sometimes high volumes of large image files, so the limited capacity HD is no longer a problem.
Aperture does not slow down with a referenced library as the HD fills.
The Vaults cannot be accessed like manual back ups can, there is no way of knowing what is in there, you hope it is your entire Aperture library.
With manual project backup you have a more manageable size that is much more versatile, and is viewable because of its smaller size. You can delete stuff and then restore it from the backup.
It is safer in my opinion to not have all the library in a single library folder. Much safer split up by project.
When i did use a managed library and Vaults there were times when i wanted stuff off the Aperture library but still kept in the vault, which was not possible.
Allan
Maybe you are looking for
-
Accessing The Chooser In Os9 Classic
How does one access the chooser to change the printers in os9 classic from panther? (assuming the computer is NOT dual bootable in 9) basically I want to be able to switch from 2 different OS9 printers
-
I Bought a iPad and when I turn it on I get the hello scree, then the language page, then the country page then the fourth page says must sign in with Apple id and password and it shows the part of the persons I'd shaded out in grey. It says I need t
-
Hi everyone, I'm trying to use the batch create multiple files command in Acrobat 10.1.3 to create a pdf from multiple word files but when I try to add the files, all Word files are greyed out. Is it possible to batch create from Word files or is tha
-
"HDCP" problems on my macbook.
For some reason, TV shows that I have purchased recently will now no longer play due to apparent "HDCP" problems on my macbook pro, help! This hasn't been an issue before and I haven't changed any settings at all.
-
I am running Visual Studio 2012 I am getting a return code of 0x80070091. This happens when I do a Build 'Deploy Solution'. Visual Studio 2012 worked, until I did a Visual Studio download Visual Studio 2013.