Helpppp Please !!!

Hi !
I hope maybe some of you can help me !
3 days ago I was listening music on my Iphone 4S with my monster beats when, all of the sudden, left side of my headsets stopped working well. In fact, it was still working but sound was 3 times lower than on the otherside. I 've tried them on other iphones and on mp3, radio, etc. but it was still lower on the left side.  I thought it was because my headset were old so I took my other headset (Senheiser HD438, barely used) but after 2 days the same problem affected my Senheiser .
I wonder what could be the cause and what should I do ...
Thank you for your help !!!

You could take the iPhone to an Apple store genius bar, explain this behavior, and have the techs test the headphone outlet to see if both channels are balanced or one is getting too much power.

Similar Messages

  • [Athlon64] Ram helpppp PLEASE

    help me guys please
    I upgraded last week from an athlon xp 1800 ti4200 with 768 ddr ram (256x3)
    I'm now on an msi k8tneo2 f with an amd64 3000 and only using 2x256 since it wont work with three. But today I got
    another stick of 256 in the mail to upgrade me to one gig since I can't afford new ram right now really. Now the
    problem is once I add the other old stick which I know works fine and the new stick for a total of four the pc
    doesn't have a display and makes 3 loud beeps. The new stick works fine on its own inside the pc and will only work
    with 1 other stick in single channel mode, 3 beeps still in dual channel
    Any ideas on how to get all 4 to work together? Thakns =\

    Ok update, the single sided 256 is going back to zipzoomfly since it's useless. Now I found someone who's going to send me 512 pc2100 double sided, 8 chips on each side.
    The 3 sticks I have still are pc2100 doubled sided 8 on each side also but only 256.. Will it boot with 3x256 1x512 or will i have to rip out 2 of the 256s and run 1x256 and 1x512 single channel mode? Thanks =)

  • Helpppp please. ASAP

    pod stuck on recovery mode and locked with passcode and won't restore.

    If you use another computer, then you have to press 'No' when it says 'Erase and copy library'. If you want, (if you have your library on your hard drive) go into iPod updater and click 'Restore', will erase all data, then sync with iTunes and everything SHOULD be back to normal.
    Tyson M Moore
    (Please don't yell at me if I am wrong)

  • The majority of my library is gone, Helpppp please

    Hi all, recently I noticed that the majority of my music library has disappeared, both on my Ipod and itunes... The files are not recognized or found when clicked on, your suggestions as to how I could relocate them would be appreciated.

    run the ipod updater and format the ipod,then reload your songs using itunes(I had a similar problem on my ipod mini)

  • When trying to download the new itunes my mac telling me i need 10.6.8 but theres no update for my mac

    need help downloading the new itunes.. it keep telling me to update my mac book pro but it does not need a update... helpppp please ppl

    You need to buy a Mac OS X 10.6 DVD.
    (73183)

  • I lost my photos on my photo stream , how i can get them back? my laptop is a pc, no mac

    this is what happend
    my iphone 4 got stolen about a month ago, soo i buy a new iphone 4s
    i used my 4s only with the feedback given by icloud
    i never connect the new iphone to my latop until today
    today when i connected the 4s, all the information on it get erased!!
    the 4s got all the old information of the 4
    i dont know what to do, i have already put on the syn option for the photo stream in the 4s since the first day a bougth it,
    but now when i look to it it is emty
    the last synchronization to icloud was today at 11am and in that time the were about 174 photos on the photo stream but now there no one!
    what i can do? when i go to my pc i can see the photos on the photo stream!
    helpppp please!!!

    Often a simple reboot will resolve the problem. If it doesn't, do a test copy in the Finder from the source to the backup volume. Is that slow too? Delete the copied files from the backup volume after the test.

  • Condensation on trackpad?!?

    Ok so a little bit of condensation from my drink got on the trackpad of my MacBook Pro and now it's not working! It usually fixes itself after it dries when this happens but it has been 3 hours and the mouse is just jumping around and unresponsive to my touch. Of course this happens when I have papers to right! Is there a way that an external mouse would work until I can get it repaired? Would I be able to just plug it in and have it work or would it require the trackpad to even start using it? I know nothing about computers so helpppp please!

    Kansas lol wrote:
    Ok so a little bit of condensation from my drink got on the trackpad of my MacBook Pro and now it's not working! It usually fixes itself after it dries when this happens but it has been 3 hours and the mouse is just jumping around and unresponsive to my touch..
    ...Is there a way that an external mouse would work until I can get it repaired? Would I be able to just plug it in and have it work or would it require the trackpad to even start using it? I know nothing about computers so helpppp please!
    You should be able to use a USB mouse with no problem. My wife uses a Logitech USB trackball in place of the trackpad constantly with no issue. However, if the mouse is jumping around without you doing anything at all, an external pointing device may not fix that. I assume you attempted to carefully mop up the drippings on the trackpad rather than just letting it dry by itself.
    This http://support.apple.com/kb/ts1449 might prove helpful. Even more helpful is the inevitable advice that mixing drinks (or any liquids) and laptops in the same location is dangerous so don't do it.

  • Nokia 1020 Lumia Camera

    I have a problem whit, my lumia camera app, when i take many pictures in 5MP+38MP 4:3 mode the phone after some time freezes, and i have to do the restar, pressing the volume down and power button. And the phone creates corrupted 38MP pictures they turn all green or grey and have no image only the 5 MP have image. HELPPPP please my phone have de WP 8.1 cyan version 8.10.12393.890. 
    I have alredy used the lumia softwere recovery tool actions but the problem still continuessss.........
    In anex is one of the corrupted pictures
    Attachments:
    WP_20140522_04_18_23_Pro__highres.jpg ‏614 KB

    hi mate, in this case you will need to contact the developer of the app, as we are a user to user forum only for Nokia products and services.

  • HT1414 what is error -3 when trying to restore iphone

    I Get an unknown error -3 when I try to restore my iPhone does anyone have anyideas helpppp please...

    iPhone Error 3:  http://lmgtfy.com/?q=iphone+error+3

  • My iphone 4 keeps going into guided acess mode were i cant touch anything. i have for gotten my password and i cant seem to press the home button to go home. it tells me to put a password in but i have no clue. please HELPPPP!!!!!!

    my iphone 4 keeps going into guided acess mode were i cant touch anything. i have for gotten my password and i cant seem to press the home button to go home. it tells me to put a password in but i have no clue. please HELPPPP!!!!!! im getting worried i have no clue whats going on. help and advice would be highly appriciated.

    Just reset your phone:
    Press the Sleep/Wake button & Home button at the same time, keep pressing until you see the Apple logo, then release.
    This should let you use the phone normally, no restore needed.

  • Why isn't itunes loading? The "error" report keeps coming up and when I press "Don't send" it just won't load . PLEASE HELPPPP !

    I jsut downloaded the newst iTunes.
    When ever I ppress the icon or go through the list of programs to open It, I click on it then the "Error report" comes up. Everytime I try to open it the "error report" comes up and the choices are "Send error report" or "Don't send" and iTunes will not end up opening up. PLEASE HELP !

    See this previous discussion
    https://discussions.apple.com/message/3066086#3066086

  • Itunes stopped syncing and says I must restore Ipod. My media videos did not get backed up. I can't replace the videos PLEASE HELPPPP

    I need some serious help, PLEASE!!! While I was syncing with Itunes and my ipod touch everything just stopped.  Then itunes says I must restore.  I didn't get my media file videos backed up and I won't be able to replace the content. (mom 82 YOA playing panio & yodeling etc)  Can i do anything to save them?  Now my ipod won't do anything.  I try to get it to open so I do as told with trying to get the red slider (?) but only get white apple then the itune symbol with the picture of the USB plug & wire below that.  Please someone help.

    Thank you, but I did that. I de-selected and then re-selected but because the 13019 still won't allow the sync, all it did was completely delete everything on my Ipod!  I now have no songs on my Ipod when at least before, I had all my songs but the new 12 songs!  I'm freaking! 

  • Please somebody help me lost audio after opened logic 9 and X at the same time helpppp

    helppp please lost audio after opened logic9 and X together can't find the solution  i only have audio in the main output of my audio interface gott a motu 828 MKII somebody help me please

    Hello all looks normal when the problem was presented simultaneously opened LPX LP9 and when you return to open a new project or the same project and I only have audio in my headphones output interface, my interface is a motu 828Mk2 the project exists and the interface looks normal in every normal output comprises all looks normal just never sounds like it had passed but never opened the two programs at the same time not to do, I use a digital mixer yamaha normal surface responds as ccontrolador all seems to work perfect but I only have audio output from the headphones even if I motu channel by channel and I assign output sound headset

  • Pictures are coming out blurry after ios5 dnld. Anyone please helpppp!!!

    When I take a pic it shows up blurry in my camera roll. And when I try to delete I get a saving image icon that shows forever and never seems to go away. Had these problems since updating to ios 5. Someone, anyone please help. I use my camera all day everyday and this is just crap!!

    I found the following post in another forum and tried it this morning and it worked great.  My problem was when I took a picture and viewed in the camera roll it was either heavily pixated or it had a white screen with a box in the middle of it.  It would become clear if I hit edit but if I hit auto enhance it would become a black screen.  Anytime I tried to choose an option, i.e. delete, or email the picture, it would have a saving photo message and stall.  I could at times get it to email the picture to my wife who has same specs as myself, (iPhone 4 iOS 5) and hers was fine.  But I had not synced hers recently, and I had mine.  Only thing that was not the exact same, settings were.   
    http://www.iphoneincanada.ca/how-to/how-to-fix-iphone-camera-roll-crash-and-phot os-turned-to-other-in-itunes/
    The only thing that I would add is when I first did this, when it said to reset I did a Lock/Home reset.  When I opened photos they were the same and when I opened iExplorer the files were still there.  So I deleted them again and did a soft reset and when my phone came back up I opened my Camera Roll and in about 5 seconds all my photo's were there and you could view them like normal.  Very easy and you do not have to restore your phone!!!  Highly recommended to try first. 

  • Ok i bought my phone OMGG... PLEASE HELPPPP

    ummm did the complete activation and it said completion of activation is finished then oh b4 anythin else i cant recieve or make callsz now wat isss thisssssssss

    Hmm...looks like we have this same old thread of complaint going again...
    I too purchased my iPhone the first night, went home, and activation took about 4 minutes. I was already an existing ATT customer though, and I completely understand that it can take up to 48 hours to port over a number from a different provider. That isn't just for the iPhone, that is for ANY ATT phone being ported over from another server.
    But as to the OP, I would suggest calling ATT and letting them know where you are in the process and seeing what they have to say. I would venture to guess not being able to deduce much else from your almost-not-English post that you just have to wait.
    Please use punctuation, grammatical sentences, and no teen speak in the forums, please.

Maybe you are looking for

  • Adobe Bridge problem

    To whom this question may be directed to: Please gidet me in resolving my problem with TRYING to open a file in Adobe bridge CC only to be presented a message telling me that it can NOT be opened because CS 5 is no longer on my computer of which I al

  • Dynamic URL's in RTF Template

    I know I can uset the url:{'c:\logo.gif'} in a picture to dynamically load a gif into by report, but how do I do it if I want the location of the gif to come in on the XML so that I can have different logos or signatures based on the report data?

  • CF10 deployed in JBOSS

    Hi, I deployed CF10 to JBOSS and everytime I need to access the CF admin i need to put cfusion. (eg https://<host>/cfusion/cfde/). even the deployed CF application I need to put cfusion. is there a way my CF application can access without cfusion? e.

  • Cannot pause or preview animation to a certain time point.

    Hello All, I have Adobe Captivate 4. I am leaving my work in 2 weeks time and i have been asked to record and talk about the software applications i use for my job. I record my application (Autodesk Inventor) and it inserts the full motion preview in

  • Custom Combo Box. Error # 2025

    package files{           import flash.display.MovieClip;           import fl.data.DataProvider;           import fl.controls.ComboBox;           import flash.text.*;           import flash.display.Sprite;           import flash.filters.*           pu