Helppppp I want to upload 2 sites...

Ok, very frustrated with Mobileme and lack of support...I have 2 different sites I want to upload. Do I have to get 2 different mobileme accounts? Both will be using my own personal domains (different domains), forwarded from Godaddy (not sure if it is necessary to still use godaddy, but I have my first site up and running, so not rocking the boat).It was a painful process to get this far, one more site to go...I don't see any options to add another domain in my account. So do I have to pay another year's subscription and have a completely separate account to have more than one site?

BCartgroup,
Thank you for posting your domain name, I've tested it and found the following. While carolbensonart.com resolves correctly to your site, www.carolbensonart.com gives the MobileMe error page. This indicates that there's an issue with the setup of the domain with MobileMe and the domain forwarding URL.
In order to correct the issues you'll need to first correct the domain setup with MobileMe. There are instructions for the MobileMe domain setup at http://docs.info.apple.com/article.html?path=MobileMe/Account/en/acct17114.html and Apple's MobileMe Chat is available at http://www.apple.com/support/mobileme/.
Once the domain is properly setup with MobileMe, you'll need to correct the forwarding URL issue. I've added notes to your account about the correction that needs to be made.
For future viewers of this thread, I've previously listed the full instructions for forwarding a Go Daddy registered domain to MobileMe in the thread located at http://discussions.apple.com/thread.jspa?messageID=9730117#9730117.

Similar Messages

I want to upload HTML code from an existing site and then revise in Muse. Is this possible?

I want to upload HTML code from an existing site and then revise in Muse. Is this possible?

HTML files from an existing site cannot be reused in Muse as Muse works only with files having extension as .muse.
However, you use apps like Dreamweaver to edit your existing HTML files.

IWeb wants to upload the entire site

I'm using iWeb with UK2.net to host my site. The problem I'm having is this; iWeb will take six hours to upload the site to uk2.net, and it seems to fine online but after the upload I get an error message telling me something went wrong. All the side bar icons remain red. So that means I have reload the entire site any time I want to add an update. It seems to want to upload the main hosting folder by over-righting it and that is why it takers so long. Has anyone else experienced this problem and has anyone any suggestion how to fix this?

The iWeb FTP does upload the whole folder of files created by the application although it shouldn't take 6 hours !
The alternative is to publish to local folder and upload using an FTP application. This way you can see the files on the server too to make sure they are all being uploaded and to the correct place...
http://www.iwebformusicians.com/iWeb/Publish-Website.html
An alternative to uploading the whole folder is to upload the contents...
http://www.iwebformusicians.com/iWeb/URLs-Favicons.html
The fact that you are getting an error message and the pages remain red in iWeb means the all the files aren't getting uploaded or the application is not creating the assets.http file correctly. Try the troubleshooting steps under "Fix iWeb" on this page...
http://www.iwebformusicians.com/iWeb/iWeb-Tips.html

How to upload site created with Dreamweaver via FTP to the iWEB server?

Hi everyone,
I recently created a site on Dreamweaver and want to upload the site, via FTP to the iWEB server. My questions are the following:
1. What is the FTP host address?
2. How do I connect to my website via FTP?
Any help on the following questions will be much appreciated.
Thanks!

Hello Lauretta and welcome to the forum.
You do not connect to iDisk via FTP. iDisk uses WebDAV. Also you do not need to manually upload the published files to iDisk as recommended buy others in this thread. Once the site and server is set up in DW you can publish and upload directly through DW.app Check out this post for more info.

Can't see photos in Pictures folder when wanting to upload one

I just got my mac and moved all my photos over via drop box with my old mac. I wanted to upload a photo, but when I go to pictures in finder to find one it just has iPhoto library as the selection and does not let me see any of the photos in the library individually.
What can I do!?

Welcome to the Apple Discussions.
Since iPhoto 7 (iLife 08) the old iPhoto Library Folder is now a Package File. This is simply a folder that looks like a file in the Finder. The change was made to the format of the iPhoto library because many users were inadvertently corrupting their library by browsing through it with other software or making changes in it themselves.
Accessing the iPhoto Library Folder directly has never been supported in any version of iPhoto.
There are many, many ways to access your files in iPhoto:
*For Users of 10.5 and later*
You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
Uploaded with plasq's Skitch!
*For users of 10.4 and later* ...
Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
*If you want to access the files with iPhoto not running*:
For users of 10.6 and later:
You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu. Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and later:
Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
All of the above are a: faster and b: Safer than rooting around in the old Library Folder.
Regards
TD

I want to upload my resume which i have on pages. the "choose file" to upload is grayed out. how do i choose a file?

i want to upload my resume which i have on pages. the "choose file" to upload is grayed out. how do i choose a file?

Safari on iPads has no facility to upload files to web sites. You need to use an app made specific for that site or use a computer.

Error message when I try to upload site changes...

I'm using iWeb '09 3.0.3 (9833). When I click "Publish site changes", I get an error message stating: "Couldn't reach the MobileMe configuration server. Try publishing your site again later." This is the first time I've ever gotten this message. I checked the MobileMe status page and it says that all MobileMe services are up and running. My site is published on MobileMe, with a custom personal domain that I purchased from GoDaddy.com. My domain still works and my site is up and working fine, but I can't get iWeb to upload any changes. What is going on with iWeb? Any help will be much appreciated, as I have some site changes I want to upload immediately. Thanks.

OK, I've just checked my MobileMe System Preference Pane and there seems to be a problem logging into MobilMe from there. This must be what's going wrong with iWeb. Is this a problem with my iMac or the MobileMe servers?
I'm able to log in without problem on my MacBook but not on my iMac for some reason. On my iMac, when I try to log in using the MobileMe Preference Pane it states that my username and password may be invalid, but my account is working everywhere else (i.e., email, MoblieMe web services, etc...)

Upload site from Fireworks ?

Hi,
This is probably a really dumb question, but I need to ask
it.
I have designed a site in Fireworks now I want to upload it
to my host can I do it straight from Fireworks or do I need to use
fireworks in conjunction with Dreamweaver. ?
What is the difference between Fireworks and Dreamweaver ?
Thanks in advance.
Justin.

mettam wrote:
> Hi,
> This is probably a really dumb question, but I need to
ask it.
>
> I have designed a site in Fireworks now I want to upload
it to my host can I
> do it straight from Fireworks or do I need to use
fireworks in conjunction with
> Dreamweaver. ?
> What is the difference between Fireworks and Dreamweaver
Fireworks was developed for creating images for the web, and
not entire
sites. Dreamweaver is an HTML editor, and the program you use
to build
Web pages and sites. The normal workflow is to export your
images from
Fireworks to your Dreamweaver site, and then use Dreamweaver
to add the
images to its pages.
Linda Rathgeber [PVII] *Adobe Community Expert-Fireworks*
http://www.projectseven.com
Fireworks Newsgroup:
news://forums.projectseven.com/fireworks/
CSS Newsgroup: news://forums.projectseven.com/css/

I've made a video about 3 minutes long but when i try to download it youtube it fails (-error 108) how can i fix it? convert? downsize? helppppp, i want to make full hd videos longer than 3 minutes long.

I've made a video about 3 minutes long but when i try to download it youtube it fails (-error 108) how can i fix it? convert? downsize? helppppp, i want to make full hd videos longer than 3 minutes long. i manged to upload a short 1:43 min video to youtube but the quility was poor compared to the camera a was using wich was hd?

I've made a video about 3 minutes long but when i try to download it youtube it fails (-error 108) how can i fix it? convert? downsize? helppppp, i want to make full hd videos longer than 3 minutes long. i manged to upload a short 1:43 min video to youtube but the quility was poor compared to the camera a was using wich was hd?

I want to upload one and only that one specific file

Hi everybody,
this may sound like a silly question, but I got a problem which is driving me mad I can't figure out a way to solve it.
So here it comes.. :-)
Every time I upload files within my DW file manager it not only uploads that specific file but also all the others files. For example I change one html file, upload it and when its done it also loads all the embeded mp3s and videos and css and all that crap which takes hours.
I'm sure there is a way to tell DW to only upload the file I want to upload, but I can't find it in the setup.
By the way, I'm using DW CS4.
Thanks for your help!
Cheers!

I don't have CS4, but if you look in the Preferences in the Site section it may have something there to adjust in that regard (Edit -> Preferences -> Site). In CS3 it provides for allowing one to select whether they want to be prompted to upload dependent files. In CS3, deselecting these options is supposed to not transfer any dependent files (mine is unchecked, but still prompts). It may be different in CS4, but in that section there is a Help button that leads to explanations of the settings.
The wondering I have is whether you are getting a prompt or not regarding uploading dependent files when you try to upload the file. If so, then that would be where you indicate not to do so.

I want to upload data from excel to R.12 tables

Dear All,
We have implemented R.12 we have already migrate data from legacy to EBS but during go live period many transaction cannot be record.
I have data in excel I want to upload. What is the best & save way please let me know.
Regards,
Muhammad Faraz
EBS Coordinator I.C.T

Hi Muhammad,
The easiest way to upload data into a table from excel is to use Import Data feature of SQLDeveloper.
What you need to do is :
Right-Click on the table name in the Navigator.
Select Import Data
Choose the excel file you want to load the data from.
Map the columns of the xls file to the columns in the table
Upload.
Thanks
Pushkar.

Hi i want to upload my music from my i-phone to i-tunes so i can then transfer to my new samsung phone. However my i-tunes is linked to another computer which i no longer have. PLEASE HELP!!!

Hi i want to upload my music from my i-phone to i-tunes so i can then transfer to my new samsung phone. However my i-tunes is linked to another computer which i no longer have. PLEASE HELP!!!

The iphone is not a storage/backup device. The sync is one way - computer to iphone. The only exception is itunes purchases. File>Devices>Transfer Purchases

Want to upload company logo into ICON table

hi
i want to upload my company logo into ICON table
how i can upload it .
thanks in advanced.

Hi,
refer
Create and Add Icons to table ICON?
Or
Logo Upload: Problem with the Format
Hope this solves your purpose.
Award points if it helps.
-Gaurang

HT201240 I just got my Mac yesterday. My kids want to access sites that need the adobe player. When I try and download it asks for a password. I do not even remember setting one up? How do i find out what it is?

I just got my Mac yesterday. My kids want to access sites that need the adobe player. When I try and download it asks for a password. I do not even remember setting one up? How do i find out what it is?

FYI this is the legitimate Flash Player installer:
This one is bogus:
As X423424X wrote do not download it from any site other than the one he linked.
Adobe does not require a password to download the Flash installer. Generally speaking passwords are not required to download software, unless you must register with the website so as to log in. In that case you should never use the same name and password you use to administer your Mac.

I want to upload documents from my pc (windows vista) to the cloud so I can see and edit them on my iPad 3. How do I do this?

I want to upload documents from my pc (windows vista) to the cloud so I can see and edit them on my iPad 3. How do I do this?
I have the cloud on my pc and I've moved documents to it, but they don't update when I update the one on my pc.
And I don't know how to get them on my iPad. I have the new ios7, btw. Just got it but couldn't find my documents with ios6
Thanks

You can upload files to Dropbox and edit them with Quickoffice Pro HD.
http://i1224.photobucket.com/albums/ee374/Diavonex/aed9d078ffa732f02b48eebd3b723 95d_zpsa0036f7b.jpg

Helppppp I want to upload 2 sites...

Similar Messages

Maybe you are looking for