Helppppppppp

I couldn't connect to wifi on ipad 3 it always message incorrect password . pls need your help

The correct password is printed on the router's label.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

Float type problem helppppppppp

I have a jsp page, which retrieves values from a html page, my problem is that
i can insert the values in database, but the problem is that it does not insert the flot type values...
like 21.21, 242.52. It shows only 21,242
it does not shows in float type.
html form:
<input type="text" name="code" size="5" maxlength="5">
<input type="text" name="Description" size="65">
<input type="text" name="DrAmount" size="12" >
<input type="text" name="CrAmount" size="12" >
<SELECT name="type">
<option value="" selected></option>
<option VALUE="C">C</option>
<option VALUE="O">O</option>
<option VALUE="OI">OI</option>
<option VALUE="OR">OR</option>
<option VALUE="S">S</option>
<option VALUE="SB">SB</option>
<option VALUE="SG">SG</option></select>
<input name="pct" type="text" size="6" maxlength="5" >
jsp page:
<html>
<head>
<%@ page
     import = "java.io.*"
     import = "java.lang.*"
     import = "java.sql.*"
%>
<title></title>
</head>
<body>
<h1></h1>
<%
     String Code,Description,Dr_Amount,Cr_Amount,Pct,Type, sql1 ;
     ResultSet results;
     PreparedStatement sql;
     try
          Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
          Connection conn=DriverManager.getConnection("jdbc:odbc:pf","scott","ttlscott");
          try
               int gl_code;
               Float db_amt,cr_amt,gl_pct;
               String gl_descr, gl_type;
               boolean     doneheading = false;
Statement s=conn.createStatement();
Code = request.getParameter("code");
Description = request.getParameter("Description");
Dr_Amount=request.getParameter("DrAmount");
Cr_Amount=request.getParameter("CrAmount");
Type = request.getParameter("type");
Pct=request.getParameter("pct");
PreparedStatement pstmt = conn.prepareStatement(
("INSERT INTO gl_mast VALUES (?, ?, ?, ?, ?,?)"));
pstmt.setInt(1,Integer.parseInt(request.getParameter("Code")));
pstmt.setString(2, request.getParameter("Description"));
pstmt.setFloat(3,Float.parseFloat(request.getParameter("Dr_Amount")));
pstmt.setFloat(4,Float.parseFloat(request.getParameter("Cr_Amount")));
pstmt.setString(5, request.getParameter("Type"));
pstmt.setFloat(6,Float.parseFloat(request.getParameter("Pct")));
pstmt.executeUpdate();
               sql = conn.prepareStatement("SELECT * FROM gl_mast WHERE gl_code = '" + Code + "'");
               results = sql.executeQuery();
               while(results.next())
                    if(! doneheading)
                         out.println("<table border=2>");
                         doneheading = true;
gl_code = results.getInt("gl_code");
gl_descr = results.getString("gl_descr");
db_amt = results.getFloat("db_amt");
cr_amt = results.getFloat("cr_amt");
gl_type = results.getString("gl_type");
gl_pct = results.getFloat("gl_pct");
                    out.println("<BODY bgColor=blanchedalmond text=#008000 topMargin=0>");
                    out.println("<P align=center><FONT face=Helvetica><FONT color=fuchsia > <BIG>GL MASTER INFORMATION</BIG></FONT></P>");
                    out.println("<P align=center>");
                    out.println("<TABLE align=center border=1 cellPadding=1 cellSpacing=1 width=\"75%\">");
                    out.println("<TR>");
                    out.println("<TD>Code No.</TD>");
                    out.println("<TD>Description</TD>");
                    out.println("<TD>Dr. Amount</TD>");
                    out.println("<TD>Cr. Amount</TD>");
                    out.println("<TD>Type</TD>");
                    out.println("<TD>Percentage</TD></TR>");
                    out.println("<tr><td>" + gl_code);
                    out.println("<td>" + gl_descr);
                    out.println("<td>" + db_amt);
                    out.println("<td>" + cr_amt);
                    out.println("<td>" + gl_type);
                    out.println("<td>" + gl_pct);
               if(doneheading)
                    out.println("</table>");
               else
                    out.println("No matches for " + Code);
          catch (SQLException s)
               out.println("Dupliacte Entry<br>");
     catch (ClassNotFoundException err)
          out.println("Class loading error");
%>
</body>
</html>
error:
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: Unable to compile class for JSP
An error occurred at line: 13 in the jsp file: /gl_master/gl_save.jsp
Generated servlet error:
D:\Program Files\Apache Software Foundation\Tomcat 5.0\work\Catalina\localhost\abhi\org\apache\jsp\gl_005fmaster\gl_005fsave_jsp.java:100: incompatible types
found : float
required: java.lang.Float
db_amt = results.getFloat("db_amt");
^
An error occurred at line: 13 in the jsp file: /gl_master/gl_save.jsp
Generated servlet error:
D:\Program Files\Apache Software Foundation\Tomcat 5.0\work\Catalina\localhost\abhi\org\apache\jsp\gl_005fmaster\gl_005fsave_jsp.java:101: incompatible types
found : float
required: java.lang.Float
cr_amt = results.getFloat("cr_amt");
^
An error occurred at line: 13 in the jsp file: /gl_master/gl_save.jsp
Generated servlet error:
D:\Program Files\Apache Software Foundation\Tomcat 5.0\work\Catalina\localhost\abhi\org\apache\jsp\gl_005fmaster\gl_005fsave_jsp.java:103: incompatible types
found : float
required: java.lang.Float
gl_pct = results.getFloat("gl_pct");
^
3 errors
     org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:84)
     org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:332)
     org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:437)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:497)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:476)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:464)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:511)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:295)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
note The full stack trace of the root cause is available in the Apache Tomcat/5.0.30 logs.
Apache Tomcat/5.0.30

               Float db_amt,cr_amt,gl_pct;
found : float
required: java.lang.Float
db_amt = results.getFloat("db_amt");The messages are self-explainatory. You are having objects of type Float. and the ResultSet.getFloat() would return float.
Cheers
-P

Helppppppppp!!! - FCHR - Online Cashed Checks

Hi All,
In Dev, transaction FCHR for Online Cashed Checks works fine. The 'Posting Log' displays the document number that was posted after FCHR has been run.
In QA however, the 'Posting Log' displays four asterisks '****' instead and no posting seems to be made.
Could you help me with this please?
Thanks in advance,
Deki

The issue was related to field status.

Wen i charge movies and i start to ply,this unknow error message appears(1718449215) and the movie donem't starts. how so? what do i do? helppppppppp

wen i charge movies and i start to ply,this unknow error message appears(1718449215) and the movie donem't starts. how so? what do i do? helppppppppp

wen i charge movies and i start to ply,this unknow error message appears(1718449215) and the movie donem't starts. how so? what do i do? helppppppppp

HT204400 I am trying to set up my apple tv and i am unable to connect to the internet because i need to get to an internet page to put in my password. HELPPPPPPPPP

I am unable to connect to the internet because to log in i need to put in a password and to do that i need to get to a internet page. helppp

There is no web browser on the ATV, as a result, it cannot be used with such Internet connections.
Contact whomever provides support for the Wi-Fi service, they may be able to add the ATV to a whitelist to allow it to connect.

Iphone locked by apple helppppppppp

i downloaded iOS 4.3b3 and i updated the firmware as my phone was not registered with apple dev program it has been locked by apple
wat to do now plzz help me
or how to install ios 4.2.1 again

About the locking : I don't know. But downgrade seems impossible. We had to buy another iPhone just because of that.

Treo 755p helppppppppp me please!!!!!!!!!!!!!!!!!!!!!!!!

I woke up today to find my phone all kinds of messed up. My phone can turn on, but it can't turn on the make a call or send a text message. Also, my phone will not charge the battery and it will always remain dead. I even tried taking my battery out for an half hour and charged it in my brothers phone. As soon as I put the battery back into my phone it instantly went to red! this is more... my phones screen is like faded in color, then it is constantly feeling like its on fire when its in my hands.... please help me!!!! thanks
Post relates to: Treo 755p (Sprint)

You can try a hard reset to bring the device back to factory defaults, and then test for same issue without hotsyncing. If the problem reoccurs then there is a hardware issue with the device, and it will need a repair / replacement. If the hard reset resolves this problem then there is a software issue. All data on the device will be lost with a hard reset and the device needs to be backed up first. Follow theses steps to perform a hard reset:
You may need to hard reset your device and rename your backup folder. Go to http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=887 and follow the directions to do a hard reset. Next before you hotsync your data back over you will need to rename your backup folder, to do that go here;
XP
C:\program files\palm or palm one\[hotsync username]\ and rename your backup
folder to backup.old
Vista
Start-->documents\Palm OS Desktop\[hotsync username]\ and rename your backup
folder to backup.old
Then hotsync to your current hotsync name and all your contacts, calendar,
tasks, and memos will come back over.
Show file extensions for XP or Vista
XP
If you can not view file extensions on your PC I would like you to open a
folder go to Tools-->Folder Options--> View (tab) and under show hidden
files and folders uncheck hide file extensions for known file types.
Vista
Open control Panel go to Folder Options--> View (tab) and under show hidden
files and folders uncheck hide file extensions for known file types.

Photostream not syncing on windows 8 64 bit

I have tried everything I can think of to get the photostream synced. Signed in, signed out, signed back in, no good. Uninstalled, reinstalled, no good. Deleted cache files, no good. My photostream folder will show 5 pictures most of the time, and the most I got it up to was 39. Please Helppppppppp!! Apple products are supposed to be seemless.

As of version 2.1 of iCloud Control Panel, it IS supposed to support Windows 8. It says so in this Apple Support article:
http://support.apple.com/kb/DL1455
That being said, there's obviously some issues with getting it to run on Windows 8. Since I made this post I eventually did get it working, but I tried SO MANY different troubleshooting steps trying to fix it, that I have no idea what it was that actually solved the problem.

Problem Instaling Microsoft Apps 2.1 5616

Can not install update Microsoft Apps 2.1 5616 and previously used the 2.00 version.I've tried to solve the problem with reinstal Belle Refresh but again it was the same through the Nokia Suite and via OTA Helppppppppp!!!!!
Solved!
Go to Solution.

We removed the many posts with screenshots as your description is quite clear and these posts do not really add any extra information. Have you attempted to do a fresh install of your device? Follow the procedure below to do a full device reset and (re)install of the system firmware:
If you have data on the phone you wish to keep create a backup using Nokia Suite but when asked deselect the option to include settings in the backup. You can start a backup through Tools>Backup in the Nokia Suite menu.
Now disconnect your phone from the PC and select the offline profile, press the on/off switch and from the menu which appears select and activate the profile offline.
Enter the code *#7370# followed by the security code 12345. Please be aware this reset may take a while. Your phone will restart when finished.
After the phone restarts go through the Device First Use sequence to setup the phone correctly.
Now connect the phone to your PC again and let Nokia Suite install the requires files on phone. After this (re)install the latest system update. When you go to the update screen in Nokia Suite your will either be presented by a system update or you can choose to re-install the current (up to date) version again.
After the update verify if there are any additional updates and install these as well.
After this you can restore the backup if you made one.
It is possible that your device storage area requires a full rewrite to allow the installation of these apps, if the above does not resolve the ability to install the apps please visit a Nokia Care point for further assistance. You can find the nearest one through the 'Contact us' section on this page.
Kosh
Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

Flush method with URLConnection

Hi everyone
I've wrote a few time ago a HTTPClient program, it works fine, but there is a little problem :
When i read a file for send it thru an DataOutputStream made with the OutputStream of an HTTPUrlConnection, all data are fully buffered.
They are sent when the close() method is invoked on DataOutputStream.
If i put a flush() method (see code below), there is no change.
I need to send the data as soon as i read them for two reasons :
- first there is an MemoryOverflow problem with big files
- I have a progress bar linked with data stream, it reach 100 % and then wait for data to be send when close() is invoked. Not good...
Please, any help appreciated : is there a solution ? use another kind of outputstream ? have to specify "Content-Length" when creating URLConnection ???
Here is the piece of code of Stream creation :
connection = url.openConnection();
connection.setDoInput (true);
connection.setDoOutput (true);
connection.setUseCaches (false);
connection.setRequestProperty("Content-Type","java-internal");
streamOut = new DataOutputStream(new BufferedOutputStream(connection.getOutputStream()));
And code of data reading and streaming :
while( (total-progress) > 0 ){
i = fileinputstream.read(bytes, 0, ( bytes.length >= (total-progress) ? (int)(total-progress) : bytes.length ));
out.write(bytes, 0, i);
out.flush();
progress+=i;
fireProgressChanged();
HELPPPPPPPPP !!!! THANKS

i think u shouldn't use BufferOutputStream...
<code>
//change this
streamOut = new DataOutputStream(new BufferedOutputStream(connection.getOutputStream()));
//into this
streamOut = new DataOutputStream(connection.getOutputStream());
</code>

HT2242 I can't read which is Edit or Preferences!!! duh! its in a foreign language!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1

Can someone please help as apple itunes support would not accept my serial number which I entered correctly. Why does everything have to be sooooo difficult? I downloaded itunes and unistalled and installed several times with the same problem. Agreement comes up in a foreign language. I must have clicked the right one but now I can't work out which is Edit and Preferences or know how I click on Australian english from the language on the screen. Please helppppppppp...................

"Edit" is the second menu counting from the left.
"Preferences" is the bottom item in the Edit menu.
In the leftmost preferences tab, go down to the drop down menu at the bottom of the tab. Counting from the top, English UK is the 8th entry in the list.
Click the leftmost of the two buttons in the bottom-right-hand corner of the tab. (That's the OK button.)
Now restart iTunes. Are you back in English?

Can i go a CPU upgrade in Compaq presario C707tu ?

i have a compaq presario C707tu laptop with intel pentium dual core T2310 @ 1.46 hz Cpu
i want to upgrade the processor to about 2 Ghz or more as it is 4 yr old and running slow with programs demanding high CPU usage
i found out that the laptop has a HP manufactured 30D9 motherboard and a GM965 Chipset
the laptop is in a very good condition and i can't go for a new one
please helppppppppp...........

Hi:
Here is the link to the maintenance and service guide for your notebook.
Supported processors can be found on page 1.
http://h10032.www1.hp.com/ctg/Manual/c01301275.pdf
Paul

ODBC? TSN??

Alright so I just installed oracle 10g enterprise edition on my home pc (windblows xp pro - no service packs eh :* )
I can connect to the database's sqlplus with system / password / orcl
my tnsnames.ora looks like
# tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = DNTFCUKWITHMYIP)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
so Now i want to add a system dsn so that I can use toady to work with my database right?
but when i go to add the Oracle in OraDb10g_home1 and throw in the TNS service name as ORCL it bombs out and says
Unable to connect
SQLState=IM003
Specified driver could not be loaded due to system error 998 (Oracle in OraDb10g_home1)
what does one need to do here?
helppppppppp!!!!!

Hi,
Read this thread ODBC error
Cheers

Noobie here... How do I register my HP Touchpad for the warranty

Noobie here... How do I register my HP Touchpad for the warranty. I've no ideal where to register my details.....So... Helppppppppp...lol
Post relates to: HP TouchPad (WiFi)
This question was solved.
View Solution.

When you sign into your hp webOS account device information is sent back to HP servers to basically register the device to you. This in a since does all the registration for you. You will then receive an email that will help you confirm your email address for your profile and validate it.

Rating and Reviews not showing up!!!!

HELPPPPPPPPP PLEASE
I have been stuck on 53 reviews for over a month now and Itunes will not post any others. To test this out I have even sent test reviews in from other accounts. I have even told ALL my listener just to send in a test and still Itunes will not post the new reviews.
Can someone please help.
Thanks,
Cousin Ed
https://itunes.apple.com/us/podcast/mr.-moodys-neighborhood-presented/id29992624 5?mt=2
https://twitter.com/mrmoodyshood
http://www.myndn.net
Ps. I did verify that my country is set to US when leaving and checking for reviews.

Thanks for looking into it. This has me SMH too.
https://itunes.apple.com/us/podcast/mr.-moodys-neighborhood-presented/id299926245?mt=2
Podbay: http://podbay.fm/show/299926245
Stitcher: http://www.stitcher.com/browse/feed/18504
Facebook: https://www.facebook.com/mrmoodysneighborhood
Itunes: https://itunes.apple.com/us/podcast/mr.-moodys-neighborhood-presented/id29992624 5

Helppppppppp

Similar Messages

Maybe you are looking for