Hepl !!! "File system error" on the Muvo TX FM 128

every time, I turn on my MP3 player, display "file system error" on the monitor and then it turn off. I was download firmware latest (ver. .9.0) to reinstall flow introduction. But it'sdidn't complete, and display error on the board: "please put device in recovery mode before running firmware update", althought I was connect mp3 player to PC. I was also format mp3 player several time before, but have no changed !Please tell me how the way to solve this problem!?

Recovery Mode is needed as per the message.
Download and install drivers.<
Press and hold Play button while connecting to PC.<
Keep holding Play until New Hardware Wizard starts.<
Complete driver installation.<
The run firmware upgrade.<
During upgrade select Format Data Area check box.<
PB

Similar Messages

  • File system error on Zen MuVo

    Hi,
    When I switch on my player a message come on the screen saying "file system error", does anybody know how to fix this problem?
    Thanks

    Try downloading the latest driver and firmware from the website. Install the driver file. After you have installed the driver, press and hold the PLAY button, continue holding the button while inserting the player into the USB port for about 0-5 sec. Run the firmware update file and check/tick the 'Format Data Area' check box and click on 'Start'.

  • File system error on MuVo TX

    After I transfer files to my MuVo TX FM, and I try to play the music, I get a message "File System Error. I have followed the instructions and formatted again, but I still get the message. Any suggestions?

    This is a post by Surfn, which helped me:
    I've had a similar problem with MuVo TX that is about one year old. When I let the battery run down low, I started having the problem. First what didn't work, then what worked:
    -Replacing the battery didn't work.
    2-Trying to turn it on gave "File System Error."
    3-I am on Windows 2000 OS. When I tried to click on the removable dri've in Windows explorer, it caused that program to freeze up.
    4-When I tried to double-click on "My Computer" and right-click on the removable dri've and select "format," nothing happened.
    5-When I tried to download the latest firmware and install (with the device plugged into the USB port), after a long time of searching it said that no devices were found.
    This is what WORKED for me: I downloaded the firmware NOMAD MuVo TX Audible Firmware Upgrade .0.05 from http://www.nomadworld.com/downloads/drivers When I ran this self-extracting executable, it gave some comment to the effect of "searching for devices." At this moment I held down the pause/play button and plugged the MuVo into my USB port and continued to hold the button down for another 5 to 20 seconds. This was how I was able to finally get it to find the device. At this point I was able to follow the rest of the instructions that were posted previously: check/tick the 'Format Data Area' in the dialog box and click on 'Start'.
    I think I ran the firmware executable a second time without checking 'Format Data Area' in order to make sure the Firmware was installed on the newly formatted flash dri've, but I might not have needed to do that last step.
    This has gotten me up and running where none of the other suggestions worked for me. I hope this works for you.
    I am happy to say that my muvo is working fine now.
    The only thing that I didn't do exactly like surfn described is that I didn't
    press the play/pause button during the detection of the mp3 player.
    I tried pressing the button, but the player was not detected, so I decided
    not to press it and see if it works.
    The player was detected, I selected the "Format data area" option, and pressed
    start. It worked like a charm.

  • File system error: The record ID is incorrect. Physical file: . Logical file:

    Hi,
    I face this error message when I try to 'process update' a dimention, sometime it works but sometime it failed with the error below:
    Description: File system error: The record ID is incorrect. Physical file: . Logical file: . 
    My environment: Window Server 2008 R2+SQL Server 2008 R2.
    Note: this issue can be resolved by full cube process, but I can't to that every time if it failed, just want to know what happen at backend of SSAS, It block me neary 2 week without any finding, really appreciate that someone can help on this.
    I have do some research with google, I think the root cause here is not TopCount function(It may be a problem with SQL Server2005), also not the size limitation of 4GB size of .astore file.(I check the size of my cube under 'Data\XXX.db\' folder, which only
    have few MB size).
    Thanks,
    Tom

    Hi Tom,
    Here is a microsoft fix
    FIX: "File system error" occurs when you try to run a process update operation on a dimension in Microsoft SQL Server 2008 Analysis Services and in Microsoft SQL Server 2008 R2 Analysis Services
    In your acenario, in order to fix this issue, please apply the latest Cumulative update and Service Pack according to your SQL Server version. Besides, there are two workarounds in that fix, plese try it and check if it works or not.
    http://support.microsoft.com/default.aspx?scid=kb;en-US;2276495
    Regards,
    Charlie Liao
    TechNet Community Support

  • Analysis Services failing to Start . File system error: Error occurred during the creation of directory

    Hello All,
    Posting this problem here and hoping for a solution from the experts in this forum.
    When i have restarted the Analysis Services , i see that it has been stopped but never started back. It fails with an error
    "The SQL Server Analysis Services (MSSQLSERVER) service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs."
    When Checked the Event Viewer i see the following error -
    The service cannot be started: The following system error occurred:  The filename, directory name, or volume label syntax is incorrect.  File system error: Error occurred during the creation of directory: '\\?\E:\OLAP\MSSOLAPFactory\OlapData;M:\Test
    Backup'.
    I remember changing the BackupDir value of Analysis Services few days back, and i think it could have impacted. Can you please help me how can i change back the BackupDir value and have the server back?
    Let me know if you need any more details
    SG

    Is this still an issue? If so, I would find msmdsrv.ini and make sure you don't have two folders listed in the BackupDir (or DataDir or TempDir). You'll have to runas Administrator to edit the msmdsrv.ini file and save changes. Once you fix that, it should
    succeed.
    http://artisconsulting.com/Blogs/GregGalloway

  • File System Error on Muvo Slim 51

    Hello. Up until a couple of months ago my player was working fine...until the dreaded file system error message.
    I have a macbook and I have only seen solutions for this problem using Windows platform.
    Can anyone offer any advice... the player is not even showing up in my disk utility when I plug it in.
    Thank you!

    Hi Jason. I forgot to mention this. Windows XP does not format the player. As a matter of fact, the context menu that pops up when right-clicking the storage icon (representing the player) in My Computer pops after a minute or two. Something must be wrong. When I look at the Properties of the storage representing the player, it's capacity is nil with file system as <EM>Raw. </EM>I tried Partition Magic 8 in a friend's pc but it seems that external storage is not recognized or at least I don't know how to use the software. My analysis is that this is similar to the case when you partition a hard dri've during installation of Windows XP Pro (at least on my experience) and forget to specify the file system of the other partitions. Those partitions wont be visible in the disk management tools of windows. I will try your suggestion and update this thread on my progress.
    Thanks very much

  • An error was received while reading backup file- Cancelling Operating system error 995(The I/O operation has been aborted because of either a thread exit or an application request.).

    Hi,
    We have been getting the below error while restoring a database onto SQL Server 2008. We are using lite speed and performing a full restore. When we restart the server, the restore is completed cleanly but every 3 or 4 days once, the restore is failing.
    We have tried everything from installing a patch that was supposed to fix it but it is not.
    Error Message:
    BackupIoRequest::ReportIoError: read failure on backup device 'VDI_7D17E958-2468-45A8-B7F0-EB73D0BF0F3A_3'. Operating system error 995(The I/O operation has been aborted because of either a thread exit or an application request.).
    The backup is getting validated successfully but failing while trying to read it. Any help would be greatly appreciated.
    Thanks,
    Sree

    Hello,
    I would try to get the latest update for the LiteSpeed software, based on the following thread:
    http://www.red-gate.com/messageboard/viewtopic.php?t=5968
    Please read the following article too:
    http://troubleshootingsql.com/2011/02/09/troubleshooting-that-darn-backup-error/
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • How to fix file system error 56635 in windows 8.1

    heelo pls help me to fix this problem i cant install any on my laptop.
    file system error 56635 is showing  up wen i install my kaspersky 2015

    Hello Jay,
    The current forum is for developers. I'd suggest asking non-programming questions on the
    Office 2013 and Office 365 ProPlus - IT Pro General Discussions  forum instead.

  • File system error when trying to connect to a network share

    I am trying to set up a BB Curve (9350) to access a network share (Applications/Files/GoTo) and am getting a message "File system error".  It does not ask for user/domain/password.  I have this working on another BB Curve.  When it works, it prompts for User Name, Domain, and Password.  Is there a setting on the BES that allows some phones to access the network, but not others?
    Thank you.
    JerryK

    Sometimes the devices can get pushed additional policies on accident basically, I would call the carrier first so you guys don't get charged for support and have them transfer you over to blackberry tech support.  If you have access to the server and the device they might be able to figure out whats goin on.

  • File system error message

    When I try to delete a media file it says file system error. Anyone know what this is and how to fix it? Thank you!

    First off, your question really doesn't belong in this topic; you should post in something more appropriate.
    That said ...
    Where is the file located?  On a microSD card or on the BB.  How are you trying to delete it?
    Message Edited by AndyDufresne on 09-10-2008 11:39 PM
    If you've found a solution through a post; please mark it as a solution.
    If someone's was particularly helpful, give them kudo's!.
    Get busy living, or get busy dying.
    http://blog.port3101.org/hdawg/

  • File system error while creating a virtual server

    Hi
    I get the following error when I create a virtual server:
    File System Error: Could not create directory /opt/SUNWwbsvr/https-web-content (permission denied)
    The admin server is owned by root but the instance that I want to create should be owned by webservd - like the other instance that is installed.
    this error shows that web server is unable to create a directory under SUNWwbsvr folder. Any hints pls?
    thanks!

    sorry this error is while creating a new server instance - not a new virtual server.
    File System Error: Could not create directory /opt/SUNWwbsvr/https-web-content (permission denied)

  • File System error while restoring a backup from analysis server to another

    Hi
    I have restored an analysis database backup to from server 1  (sql server 2008) to server 2(sql 2008) and its working fine 
    and now am trying to restore another database from analysis server server 3 (sql 2005) to  server 2 (sql 2008 )but its giving error that 
    File System error occured while opening the file G:\ProgramFiles\MSAS10.MSSQLSERVER\OLAP\Backup\Workordermodule.0.db\WomDW1.7.00 ..etc

    Hi Maverick,
    According to your description, you are experiencing the error when restoring the SSAS 2005 database on SSAS 2008 server, right?
    In your scenario, how do you backup your SSAS 2005 database? Please ensure that you backup and restore steps are correct. Here is a blog which describe how to migrate a cube in SQL Server Analysis Services 2005 to SQL Server Analysis Services 2008 step by
    step, please refer to the link below.
    http://blogs.technet.com/b/mdegre/archive/2010/03/31/migrating-a-cube-in-sql-server-analysis-services-2005-to-sql-server-analysis-services-2008.aspx
    Besides, you can import SQL 2005 AS database in SQL 2008 BIDS Project. Then fix AMO warnings and deploy that database on SQL 2008 Server.
    http://technet.microsoft.com/en-in/library/ms365361(v=sql.100).aspx
    Regards,
    Charlie Liao
    TechNet Community Support

  • File System Error

    Hi guys I reali need help with my bb 8520...had it 4 almst 4mnths now been workin fine all the time but now suddenly I can't download anythin orh take pix at all....if I do any of those it will show me file system error nd cancel my download nd with the pix itl save bt won't open in my gallery....I need help what should I do I'm out of options

    Hi,
    First check what is the dm-0 disk on your server:
    # ls -l /dev/disk/by-id/
    lrwxrwxrwx 1 root root 10 Feb  1 22:12 dm-name-vg_rh6u4-lv_root -> ../../dm-0
    In my case: it is the partition vg_rh6u4-lv_root which is mounted on /
    # df -h
    Filesystem                    Size  Used Avail Use% Mounted on
    /dev/mapper/vg_rh6u4-lv_root   41G   33G  6.0G  85% /
    Then, it is so good to check the file system with the fsck, (The command fsck can check unmounted partition)
    Note:
         - If the partition contains Oracle database, then make a full backup on an other partition or shutdown the database and copy all your data.
         - Force the check during the boot of your Server by modifying the file /etc/fstab.
    Best regards

  • I ran an iTunes update.  It failed with the message  System Error.  The program can't start because MSVCR80.DLL is missing from your computer.  Try reinstalling the program to fix this problem.   I tried reinstalling but get the same message.

    I ran an iTunes update.  It failed with the message  "System Error.  The program can't start because MSVCR80.DLL is missing from your computer.  Try reinstalling the program to fix this problem."   I tried reinstalling but get the same message.  I looked in my Recycle Bin for that file name but there is none there.  Is this a new file that iTunes wants?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99683)

  • Hpqdirec.exe – System error. The program can't start because ATL90.DLL is missing from your compute

    Hello,
    The following has only transpired recently. It concerns Windows 7 and my C6380 All-In-One.
    It appears to be a registry issue. I am experienced and have tried even more than that listed below.
    On launching the "HP Solution Centre", I receive the following error message:-
    “Hpqdirec.exe – System error.  
    The program can’t start because ATL90.DLL is missing from your computer. Try reinstalling the program to fix this problem."
    Are you able to advise on how I can resolve this issue. Clearly, I want to avoid a complete clean install of my PC.
     What I have tried
    - Complete Install, Reboot, Install of the HP Software
    - Restore points
    - Running virus scanners
    - Windows "Start-up Repair"
    , - Running RegZooka

    I can think of a couple of possibilities here.
    One, if this was an upgrade from XP or Vista, then it is possible that the file is just not there in the operating system. Or if some other uninstallation removed it unknowingly. Not likely but possible.
    More likely, some sort of security software (firewall/antivirus/malware) blocked part of the installation. This could result in missing HP items and/or missing linkage to operating system necessities. You might try reinstalling with the security software disabled or off completely. At the minimum, with options to allow the HP installation full access during the install.
    Hope that helps.
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

Maybe you are looking for