Here are a few thoughts and observstions

1) I can't tell you how many times I have gone to touch the little magnifying glass to search a contact and created an new contact instead. Why put the search button right under the create a new contact button? Maybe we could move this in a future update?
2) Speaking of contacts, the lag time between opening contacts and actually being able to use them is horrible. The lag time can be anywhere from 2-5 seconds. No scrolling. No typing. No searching. Nothing.
3) If I have a Safari page open to a site and select a link, a new page opens, whenever I go back to the original page it reloads it every time. My Desktop Safari doesn't do this unless I click the reload button. Why does iPhone Safari? Is there a setting to prevent this?
4) Why is the dock connector different YET AGAIN! What does this iPhone do that the 2G didn't so that the dock connector had to be redesigned? Do I have to expect that every time I upgrade an iPhone or iPod, I have to upgrade every accessory also? I have an expensive after market connection to my Honda Accord that uses the Dock connector. It is now on 50% functionable. It works with my 5G iPod but not my iPhone. And these connectors are changed without any apparent benefit to the consumer.
5) I know this is kinda an old one but why can't I at least charge from Firewire? I wish I could sync, but I would settle for charging.
6) Volume in the earpiece is too low. And yes, my hearing is great.
7) Battery life stinks with 3G on. Period. End of Story. I can't make it through a whole day/night without it going dead. And why would I turn off 3G? That's why I purchased this phone.
AND THE BIG ONE
7) I don't know if it's the three different antenna's, the fact the EDGE and 3G are different networks, or that iPhone reception is being jammed by Klingons, but the 3G iPhone has reception problems. Yea, some of you have great reception...but there is a group of iPhone users that have dropped calls 4-7 times a day. To ask me to turn off 3G to improve reception is ridiculous. Again, that's why I bought the phone in the first place. I don't recall seeing in Apple's release info that they suggest we turn off 3G to be able to hold onto a call. This really needs to be addressed.

J. Christopher Edwards wrote:
1) I can't tell you how many times I have gone to touch the little magnifying glass to search a contact and created an new contact instead. Why put the search button right under the create a new contact button? Maybe we could move this in a future update?
http://apple.com/feedback
3) If I have a Safari page open to a site and select a link, a new page opens, whenever I go back to the original page it reloads it every time. My Desktop Safari doesn't do this unless I click the reload button. Why does iPhone Safari? Is there a setting to prevent this?
There is no setting to prevent this. Safari on the iPhone appears to treats each browser window as a separate session.
4) Why is the dock connector different YET AGAIN! What does this iPhone do that the 2G didn't so that the dock connector had to be redesigned? Do I have to expect that every time I upgrade an iPhone or iPod, I have to upgrade every accessory also? I have an expensive after market connection to my Honda Accord that uses the Dock connector. It is now on 50% functionable. It works with my 5G iPod but not my iPhone. And these connectors are changed without any apparent benefit to the consumer.
Apple has been gradually phasing out firewire. The older docks and connectors were designed for both firewire and USB. The 3G iPhone connector has no firewire support.
5) I know this is kinda an old one but why can't I at least charge from Firewire? I wish I could sync, but I would settle for charging.
Apple has been gradually phasing out firewire.
6) Volume in the earpiece is too low. And yes, my hearing is great.
You can adjust volume with the rocker switch on the side. A lot of people also have the earpiece obstructed by cases or protective film which can muffle sound.
7) Battery life stinks with 3G on. Period. End of Story. I can't make it through a whole day/night without it going dead. And why would I turn off 3G? That's why I purchased this phone.
3G on just about every device ***** up a lot of juice. It's an energy hog.
7) I don't know if it's the three different antenna's, the fact the EDGE and 3G are different networks, or that iPhone reception is being jammed by Klingons, but the 3G iPhone has reception problems. Yea, some of you have great reception...but there is a group of iPhone users that have dropped calls 4-7 times a day. To ask me to turn off 3G to improve reception is ridiculous. Again, that's why I bought the phone in the first place. I don't recall seeing in Apple's release info that they suggest we turn off 3G to be able to hold onto a call. This really needs to be addressed.
Apple is working on the problem you are experiencing. Until they release a patch, why not just turn 3G off when you need to make calls?

Similar Messages

  • A few thoughts and experiences after a few hours using my new ThinkPad E440 with Win 8.1

    After waiting 36 days for my new ThinkPad to arrive, I guess I'm just "eh" about it after using it some. Here are some of my thoughts, opinions, and experiences I've had after using it for a few hours... Hope this helps other people.
    I should not be surprised because I read all the reviews, but the touch pad really sucks. I hate everything about it, the way it clicks - it's so loud and clunky! - and it's insensitivity (and I adjusted this to be more sensitive). Thank goodness for the track point. I love that thing.
    The touchscreen stopped working after a few hours of use. After I rebooted it came back. Is this a bad omen? Or did I inadvertantly turn it off? Is that even possible? I am new to Windows 8 so anything is possible.
    The touch screen, when it's working, is not very responsive. It's MUCH LESS responsive than my Samsung Galaxy Note 2 Android phone or my LG G Pad 8.3 tablet. This is very disappointing.
    I ran the hardware scan that is in the Lenovo Solution Center and got a warning under the category "Local Connection Test". I looked at the list of System Events and it's very long. The first application error event name is MpTelemetry. Response is "Not available". The next one is "PnPRequestAdditionalSoftware". Response is "Not available". And the list goes on and on and on for pages. I have no idea what to do about this or what it means.
    Also in the Lenovo Solution Center, under Software, there is a Critical Alert that says I never updated Windows. But I did when it prompted me to while it was first booting up and it was updating and installing things. Where it says "To update your operating system, you must run Windows Update", I click on the Launch button and it takes me to Windows Update where it says No Updates are Available. Go figure. It also says there have been 9 Windows updates made to the computer. I guess I'll have to just always ignore that Critical Alert.
    In the system tray, it says "ThinkPad OneLink Dock Detached!". I don't have a dock... So, yes, that's true, it is detached.   I'll have to hide that one.
    I realize there is a Lenovo Recovery Partition on the hard drive but I would really like to create a set of recovery disks before I start customizing this thing, installing apps, and moving my files over. I can't find anything that tells me how to do it. Under the control panel, there is the Recovery icon. The only choice there for creating recovery media is to create a Recovery Drive, not disks. I'll post a separate item to get information on this.
    On the positive side, I have had it in my lap the whole time and it's not gotten too hot for my legs. That's a big improvement on my old Toshiba Satellite Pro.
    This locating the Fn key to the left of the CTRL key decision must have been made by someone smoking crack. Why would anyone in their right mind want to do this? We've had the CTRL key on the outer left edge like, FOREVER, why move it now?? This will be something that will take me a long time to adjust to - if I ever do. I use the CTRL a lot for cutting, pasting, and formatting things in Excel and Word. It's going to be a battle. I wonder if any software exists that allows you to redefine the keys? Speaking of location of keys, I keep hitting the Page Down key when I want the Page Up key. I'm used to the Page Up key being above the Page Down key instead of to the left.
    After being told here in the forum that the fingerprint reader was not an option in the US I am pleasantly surprised to see one on my new ThinkPad.
    I use the right-click on my mouse often. For example, to open a link in a new tab instead of switching to the new URL. For some reason, when I click on the right part of the touch pad when the mouse is located over a link, it just opens the new URL instead of giving me options for opening the URL. I'll have to figure this out.
    So anyway, I guess that's more than a few things... hope this is useful to someone...

    You can change FN and CTRL key in the BIOS

  • Here is a few tips and tricks I have picked up over the time of having a blackberry.

    In any message application, scroll onto the message and press T to go to the top of the conversation. And B to get to the bottom.
    On your photos click I to zoom in and O to zoom out.
    Hold alt and press LGLG (not capitals) and this will bring up you event log. Press the blackberry button and clear log. ( This makes your phone faster and removes any bugs )
    If your display picture does not change within 10 minutes follow these steps applications>files>device>I M in the (I M folder) delete the whole thing! This just automatically saves things you do not need.
    DO NOT save chat history to device! This makes bbm incredibly slow and its common knowledge to.
    If your memory card is full or over 4 gb. It should not be in the phone. This also makes your phone slow.
    The app "screen grabber" is a vrius! It has very good rating, but it is full of bugs!
    Want to save battery?
    Turn your backlight brightness to 10.
    Turn off the LED indicator
    DON'T download battery saving apps, they do not work there is no way possible to save battery by having something on your phone that takes battery life to power.
    Make sure you have blackberry protect app! If your phone is ever stolen/lost you can trace it from blackberry desktop.
    Delete all call logs, and texts to make phone run faster.
    Most helpful tip I can give anyone for battery saving is DO NOT CONNECT TO 3G! Sounds stupid? Why have a 3g option if you don't want to use it? ... Connecting to 3G takes the most battery out of anything. Because 3g is on it constantly searches for full signal, which takes it out on your battery. Try it, connect to 2G only! Not 3G or 2g and 3g... Just 2g!
    To ping someone quick on bbm click blackberry button press "P" and hit enter!
    To paste quickly press blackberry button double click "p" and hit enter!
    To get up your phone number quickly press my number. ( No space between my and number ) after doing my""nospace""number click space and your number will pop up, also do it for your bbm pin ( my"nospacehere"pin and to get the model of your phone its " my"nospace" ver ...
    That's all I know! Might be helpful to some of you, to others it may be knowledge, just trying to help

    Thanks for reply,
    It's truely a disestar for me to kill my phone myself by so called bloody upgradation.
    Iwish I have not upgraded.
    I baught it from here in Bangladesh and now I’m ina mess to get at least a minimum support.
    Thanks for your valued suggessions but it didn’tmade any difference to my situation.
    So now I have an ipod in the price of an iPhone4. Crap.
    Is there any chance of fixing this bug by apple?As the same problem has already been faced by a lot of iPhone Users.

  • Where are my movies on my iPad...they are sync'd according to iTunes...I just can't find them!!!  Help...I'm going on holiday in a few days and want to watch the movies I paid for and thought I downloaded!!! :-}

    Where are my movies on my iPad...they are sync'd according to iTunes...I just can't find them!!!  Help...I'm going on holiday in a few days and want to watch the movies I paid for and thought I downloaded!!! :-}

    They should be in the Videos app :
    If they aren't in there then have you got a film age rating set in Settings > General > Restrictions that is hiding them ?

  • Hi there, i installed a system update earlier on my MacBookPro and now it wont connect to wi-fi, working through Network Diagnostics hasn't solved the issue.  all other devices here are connecting normally.  any ideas?

    hi there, i installed a system update earlier on my MacBookPro and now it wont connect to wi-fi, working through Network Diagnostics hasn't solved the issue.  all other devices here are connecting normally.  any ideas?

    Hi, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    10.4 instructions...
    Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
    If using Wifi/Airport...
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.

  • A very good friend of mine dropped her iphone into water and now it is not working.Her husband recently passed away and text messages from him and from well wishers after his decease are feared lost. Is there any way to retrieve them?

    A very good friend of mine dropped her iphone into water and now it is not working.Her husband recently passed away and text messages from him and from well wishers after his decease are feared lost. Is there any way to retrieve them?
    I suggested contacting Compub in Nassau St as the info is priceless and worth the trouble of trying to regain?
    Any thoughts? The poor lady is very distress

    If she has backed up her iPhone she can replace that iPhone and set up the new iPhone from her backup.
    You can put the iPhone that went into water into a plastic baggie with either new silica gel packets (preferred) or raw rice and let it sit for  4 - 5 days. After that time remove the phone and connect it to power for at least a half hour. While it is still connected to power reset it by holding down the power and hold button, wait for the Apple logo then let go of the buttons. Might take several tries. If it revives immediately back it up.

  • On my iPhone 4S, my headphones are not plugged in and yet I still have no sound out of the phone receiver. I've reset the phone a few times and still the same thing. HELP?

    On my iPhone 4S, my headphones are not plugged in and yet I still have  no sound from the phone receiver. I have reset my phone a few times and it still tells me when I push the volume buttons that it is my headphone volume. I have even tried turning off my  Bluetooth setting and it still tells me that my headphones are where the volumes is. AHHHH!!!! I can not talk on my phone unless I use my blue tooth. Nothing is coming out of the receiver of the phone. HELP !!!!

    Hi LittleBuffalo!
    I have an article here that describes your issue and can provide you with some more troubleshooting steps:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • In iTunes under my device, under the apps tab, Why are all the options shaded out?  I cannot make any changes, select any apps or do anything with the apps.  I was able to load a few apps and sync but cannot sync anymore to my phone.

    In iTunes under my device, under the apps tab, Why are all the options shaded out?  I cannot make any changes, select any apps or do anything with the apps.  I was able to load a few apps and sync but cannot sync anymore to my phone.

    Hi,
    ( I search for iChat questions when I have finished in the iChat Forum)
    So the menu bar reads iChat, File,  Edit,  View, Buddies, Video, Window and Help
    There is no Buddy List open.
    There is no other window for iChat open.
    In the iChat Menu you only have access to Status.
    Is an item ticked in the list ?
    Is this a green (Available item) or  Red ( an Away one) ?
    Can you access the Accounts option ?  (Sitll in the iChat Menu)
    Is anything in here ticked ?
    In the Window menu any Logged in account should appear in the list  (Between the Next Chat and File Transfer items)
    It would be useful to know which version of iChat this is.
    If no account is ticked (iChat Menu > Accounts) or not showing in the Window Menu, plus you cannot determine the Status and you cannot access the Preferences then you need to access your Home Folder/Library/Preferences
    As the Library in the Home Holder is Invisible in Lion you will need the Finder's Go Menu > Go to Folder option  (you can use it in earlier OS versions if you want)
    Type in:-
    ~/Library/Preferences
    Find the file called com.apple.ichat.plist
    Drag it to the Trash and Restart iChat.
    This will lose all the settings in iChat that you have changed from Defaults but there is no way around this.
    9:23 PM      Saturday; August 27, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Cannot edit event, add new event and when save the unit says Sorry, we are experiencing technical difficulties. Please wait for a few moments and try again. Er

    When I hit save on the edit block or new event , the following warning is shown:-" Sorry we are experiencing technical difficulties. Please wait for a few moments and try again. Error: 0000". The system locks up and can only be cleared by hitting the reload button

    Hi,
    Unfortunately we had a data base error today and lost some user accounts when we had to go back to our backups. If you have started this thread, your's is one of those. Since we can not recreate your account, please sign-up for a new account here to reply to the forum messages:
    https://support.mozilla.org/users/auth
    You can use the same username and email address as before. We are very sorry for the inconvenience.

  • Site Survey Theory .... All Comments, Thoughts, and Theories are welcome

    Hello All,
    I am seeking opinions about a survey methodology that was told to me today.  I have my own thoughts about it but I just want to make sure I'm not off base so any help is greatly appreciated.  The requirements for the wireless network are as follows:
    - Data and Voice
    - Clients will utilize all bands but newer devices will be pushed to 5GHz 
    - Clients are laptops and iPads right now but the future goal is to implement BYOD
    So, here is the methodology that was told to me ... "We survey only in the 5GHz spectrum because if you have coverage in that spectrum (5GHz) the coverage in the 2.4GHz will be the fine or even better than that.  Therefore, we feel comfortable not capturing the data in the 2.4GHz spectrum." 
    Thoughts about the above statement are welcome!!!
    Thanks,
    Malwan

    The essential question for a high-density design is how many channels for each band will be needed to match the client base? This can be a tricky question since even dual band capable clients do not always select the faster 5 GHz band. Since bandwidth in 2.4 GHz is going to be limited, 5 GHz must be relied on to reach the goal.
    Dual band adapters have been shipping with most laptops for some time. This does not mean that every laptop is a dual band client, but many are. Simply having a dual band client does not guarantee that it will choose 5 GHz over 2.4 GHz. The Microsoft Windows operating system defaults to a Wi-Fi channel search that starts with the 5 GHz channel 36 and continues searching through all of the 5 GHz channels that the client is capable of. If no 5 GHz AP is found then it will continue the search in 2.4 GHz starting at channel 1. Unless the Windows default is changed or the user has chosen a third party Wi-Fi utility to set spectrum preference to 2.4 GHz, the client radio will first try to associate to a 5 GHz AP. Apple Computer's latest release for Atheros and Broadcom chipsets also searches 5 GHz first.
    The Cisco BandSelect feature enables the infrastructure to optimize these types of client connection choices. Where possible, it helps make sure that devices are attaching to the 5 GHz spectrum channels where interference sources tend to be significantly lighter. A much greater channel selection leads to the alleviation of bandwidth challenges.
    Tablet computers and smartphones have begun entering the market at a staggering rate. The vast majority of smartphones shipping today operate in 2.4 GHz only. While many of them are 802.11n clients, of these most have implemented a single input single output (SISO) rather than Multiple Input, Multiple Output (MIMO). A SISO device is only capable of supporting MCS7 data rates, or 54 Mbps.

  • I have GarageBand for iPad 2 and noticed that there are far fewer loops for iPad than for apple laptops. Is there a library available of apple loops? I haven't been able to find any if there are. Any help would be greatly appreciated.

    I have GarageBand for iPad 2 and noticed that there are far fewer loops for iPad than for apple laptops. Is there a library available of apple loops? I haven't been able to find any if there are. Any help would be greatly appreciated.

    Update: An Apple rep called me today to update the status of my return. I was told that the replacements for the BLACK iPad 2's was still another 3 weeks out (at least) so they offered me a brand new WHITE 16GB iPad 2. I could have that or continue waiting. I opted to go ahead and accept the offer of a new white one. Worst case scenario if I don't like the white one I have buddy that just bought a 16GB black one that he would be willing to swap it.

  • Same here, 4s working perfectly, downloaded update 8.0.1 Now no wifi or bluetooth or hotspot. Control on/off icons are muted in colour and don't respond. Tried resetting network connections then total restore, didn't work so still have the same probl

    Same here, 4s working perfectly, downloaded update 8.0.1 Now no wifi or bluetooth or hotspot. Control on/off icons are muted in colour and don't respond. Tried resetting network connections then total restore, didn't work so still have the same problems as before.

    Satellite L505D-S5983
    I would try another restore of the hard disk to its original out-of-the-box contents using Toshiba recovery media. Maybe something went wrong in the process. Make sure everything works before applying any updates and adding any hardware or software.
    Then add things carefully, rebooting Windows and testing the USB and audio at each step.
    Please note this.
    The only info windows gives me for the sound card is that it from Microsoft... with a driver version of 6.1.7601.17514....which naturally doesn't really help me since I have no idea what card or mobo I have . Is there any way for me to find out what I need other than opening up my laptop?
    Every one of them lists my mobo simply as a Toshiba motherboard, with no audio card information. Which I'm assuming that is because it has an internal sound processor. My problem is that none of the properties, or ANYTHING I try, will give me information on what I need to fix this...
    All of the latest drivers for your model are easily found here. This one is for the sound.
       Realtek Audio Driver for Windows 7 (32/64)
    -Jerry

  • I bought my mac book pro 4 years ago and it is really slow now. I have downloaded Etrecheck after reading some threads on here and here are the results

    I got my MacBook Pro 4 years ago and its getting really slow.
    After reading dome threads on this site i downloaded Etrecheck and here are the results.
    Any help would be greatly appreciated.
    EtreCheck version: 2.1.8 (121)
    Report generated 21 March 2015 9:41:28 PM AEDT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (15-inch, Mid 2010) (Technical Specifications)
        MacBook Pro - model: MacBookPro6,2
        1 2.4 GHz Intel Core i5 CPU: 2-core
        4 GB RAM
            BANK 0/DIMM0
                2 GB DDR3 1067 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1067 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 814
    Video Information: ℹ️
        NVIDIA GeForce GT 330M - VRAM: 256 MB
            Color LCD 1440 x 900
            spdisplays_display_connector
        Intel HD Graphics - VRAM: 288 MB
            spdisplays_display_connector
    System Software: ℹ️
        Mac OS X 10.6.8 (10K549) - Time since boot: one day 2:7:40
    Disk Information: ℹ️
        TOSHIBA MK3255GSXF disk0 : (298.09 GB)
            - (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 319.73 GB (150.44 GB free)
        MATSHITADVD-R   UJ-898
    USB Information: ℹ️
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Internal Memory Card Reader
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Computer, Inc. IR Receiver
        Apple Inc. Built-in iSight
    Configuration files: ℹ️
        /etc/hosts - Count: 31
    Kernel Extensions: ℹ️
            /Library/Application Support/MacKeeper/AntiVirus.app
        [not loaded]    com.zeobit.kext.AVKauth (2.3.3 - SDK 10.8) [Click for support]
        [not loaded]    com.zeobit.kext.Firewall (2.3.3 - SDK 10.8) [Click for support]
            /System/Library/Extensions
        [not loaded]    com.devguru.driver.SamsungComposite (1.2.63 - SDK 10.6) [Click for support]
        [not loaded]    com.leapfrog.codeless.kext (2) [Click for support]
        [not loaded]    com.leapfrog.driver.LfConnectDriver (1.11.1 - SDK 10.10) [Click for support]
        [not loaded]    com.wibu.codemeter.CmUSBMassStorage (1.0.7) [Click for support]
            /System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
        [not loaded]    com.devguru.driver.SamsungACMControl (1.2.63 - SDK 10.6) [Click for support]
        [not loaded]    com.devguru.driver.SamsungACMData (1.2.63 - SDK 10.6) [Click for support]
        [not loaded]    com.devguru.driver.SamsungMTP (1.2.63 - SDK 10.5) [Click for support]
        [not loaded]    com.devguru.driver.SamsungSerial (1.2.63 - SDK 10.6) [Click for support]
    Problem System Launch Daemons: ℹ️
        [running]    com.wibu.CodeMeter.Server.plist [Click for support]
        [not loaded]    org.samba.winbindd.plist [Click for support]
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.CS5ServiceManager.plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [running]    com.hp.devicemonitor.plist [Click for support]
        [loaded]    com.hp.messagecenter.launcher.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [loaded]    com.google.keystone.daemon.plist [Click for support]
        [loaded]    com.leapfrog.connect.authdaemon.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.skype.skypeinstaller.plist [Click for support]
        [running]    com.zeobit.MacKeeper.AntiVirus.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [running]    com.akamai.single-user-client.plist [Click for support]
        [failed]    com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist [Click for details]
        [running]    com.leapfrog.connect.monitor.plist [Click for support]
        [running]    com.spotify.webhelper.plist [Click for support]
        [failed]    com.zeobit.MacKeeper.Helper.plist [Click for support] [Click for details]
    User Login Items: ℹ️
        LOGINserver    Application  (/Library/Printers/Brother/Utilities/Server/LOGINserver.app)
        InstUtilLaunch    Application  (/Library/Printers/Brother/Utilities/InstallUtility.app/Contents/Resources/Inst UtilLaunch.app)
    Internet Plug-ins: ℹ️
        o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Click for support]
        OVSHelper: Version: 1.1 [Click for support]
        OfficeLiveBrowserPlugin: Version: 12.2.9 [Click for support]
        net.juniper.DSSafariExtensions: Version: Unknown [Click for support]
        Silverlight: Version: 4.0.60129.0 [Click for support]
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        DivXBrowserPlugin: Version: 2.1 [Click for support]
        Flash Player: Version: 16.0.0.305 - SDK 10.6 Outdated! Update
        iPhotoPhotocast: Version: 7.0 - SDK 10.7
        googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Click for support]
        QuickTime Plugin: Version: 7.6.6
        AdobePDFViewer: Version: 10.0.3 [Click for support]
        SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
        JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Check version
    Safari Extensions: ℹ️
        Searchme  [Adware! - Remove]
        DivX Plus Web Player HTML5 <video>
    Audio Plug-ins: ℹ️
        iSightAudio: Version: 7.6.6
    3rd Party Preference Panes: ℹ️
        Akamai NetSession Preferences  [Click for support]
        CodeMeter  [Click for support]
        DivX  [Click for support]
        Flash Player  [Click for support]
        Growl  [Click for support]
    Time Machine: ℹ️
        Time Machine information requires OS X 10.7 "Lion" or later.
    Top Processes by CPU: ℹ️
            14%    firefox
             5%    WindowServer
             0%    ps
             0%    fontd
             0%    DirectoryService
    Top Processes by Memory: ℹ️
        528 MB    firefox
        176 MB    Finder
        159 MB    AntiVirus
        112 MB    WindowServer
        82 MB    mds
    Virtual Memory Information: ℹ️
        1.07 GB    Free RAM
        1.29 GB    Active RAM
        1.01 GB    Inactive RAM
        784 MB    Wired RAM
        962 MB    Page-ins
        3 MB    Page-outs
    Diagnostics Information: ℹ️
        Mar 20, 2015, 07:32:46 PM    Self test - passed

    Hardware Information: ℹ️
        MacBook Pro (15-inch, Mid 2010) (Technical Specifications)
        MacBook Pro - model: MacBookPro6,2
        1 2.4 GHz Intel Core i5 CPU: 2-core
        4 GB RAM
            BANK 0/DIMM0
                2 GB DDR3 1067 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1067 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 814
    ***Hardware looks fine
    ***Increasing the RAM can always help with slowness issues
    Video Information: ℹ️
        NVIDIA GeForce GT 330M - VRAM: 256 MB
            Color LCD 1440 x 900
            spdisplays_display_connector
        Intel HD Graphics - VRAM: 288 MB
            spdisplays_display_connector
    ***Looks fine
    System Software: ℹ️
        Mac OS X 10.6.8 (10K549) - Time since boot: one day 2:7:40
    ***You are running an Operating system over 4 years old but it shouldn't effect the speed of your computer
    Disk Information: ℹ️
        TOSHIBA MK3255GSXF disk0 : (298.09 GB)
            - (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 319.73 GB (150.44 GB free)
        MATSHITADVD-R   UJ-898
    ***Looks fine
    USB Information: ℹ️
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Internal Memory Card Reader
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Computer, Inc. IR Receiver
        Apple Inc. Built-in iSight
    Configuration files: ℹ️
        /etc/hosts - Count: 31
    ***Looks fine
    Kernel Extensions: ℹ️
            /Library/Application Support/MacKeeper/AntiVirus.app
        [not loaded]    com.zeobit.kext.AVKauth (2.3.3 - SDK 10.8) [Click for support]
        [not loaded]    com.zeobit.kext.Firewall (2.3.3 - SDK 10.8) [Click for support]
            /System/Library/Extensions
        [not loaded]    com.devguru.driver.SamsungComposite (1.2.63 - SDK 10.6) [Click for support]
        [not loaded]    com.leapfrog.codeless.kext (2) [Click for support]
        [not loaded]    com.leapfrog.driver.LfConnectDriver (1.11.1 - SDK 10.10) [Click for support]
        [not loaded]    com.wibu.codemeter.CmUSBMassStorage (1.0.7) [Click for support]
            /System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
        [not loaded]    com.devguru.driver.SamsungACMControl (1.2.63 - SDK 10.6) [Click for support]
        [not loaded]    com.devguru.driver.SamsungACMData (1.2.63 - SDK 10.6) [Click for support]
        [not loaded]    com.devguru.driver.SamsungMTP (1.2.63 - SDK 10.5) [Click for support]
        [not loaded]    com.devguru.driver.SamsungSerial (1.2.63 - SDK 10.6) [Click for support]
    ***I'm honestly not super familiar with most kernal extensions but I do see you have MacKeeper running which can slow the computer down
    ****** This next section talks about Launch agents and Launch Daemons.
    ****Something to keep in mind is that when you first get the computer that all of these folders are empty and the files in them are all third party.
    ****If you want to see if the system runs better without them Shut the computer down and turn it on while holding the shift key
    ****This will put the computer into safemode which turns off third party files and extensions and does not let any launch agent/daemons files run.
    Problem System Launch Daemons: ℹ️
        [running]    com.wibu.CodeMeter.Server.plist [Click for support]
        [not loaded]    org.samba.winbindd.plist [Click for support]
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.CS5ServiceManager.plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [running]    com.hp.devicemonitor.plist [Click for support]
        [loaded]    com.hp.messagecenter.launcher.plist [Click for support]
    ***This is the root launch agent folder
    ***I'd remove all but the first three
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [loaded]    com.google.keystone.daemon.plist [Click for support]
        [loaded]    com.leapfrog.connect.authdaemon.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.skype.skypeinstaller.plist [Click for support]
        [running]    com.zeobit.MacKeeper.AntiVirus.plist [Click for support]
    ***This is the root Launch Daemons folder
    ***I'd only keep com.adobe.fpsaud.plist and com.microsfot.office.licensing.helper.plist all the others will reinstall them selves if needed.
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [running]    com.akamai.single-user-client.plist [Click for support]
        [failed]    com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist [Click for details]
        [running]    com.leapfrog.connect.monitor.plist [Click for support]
        [running]    com.spotify.webhelper.plist [Click for support]
        [failed]    com.zeobit.MacKeeper.Helper.plist [Click for support] [Click for details]
    ***This is your users Launch Agent folder
    ***I'd remove everything here
    User Login Items: ℹ️
        LOGINserver    Application  (/Library/Printers/Brother/Utilities/Server/LOGINserver.app)
        InstUtilLaunch    Application  (/Library/Printers/Brother/Utilities/InstallUtility.app/Contents/Resources/Inst UtilLaunch.app)
    Internet Plug-ins: ℹ️
        o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Click for support]
        OVSHelper: Version: 1.1 [Click for support]
        OfficeLiveBrowserPlugin: Version: 12.2.9 [Click for support]
        net.juniper.DSSafariExtensions: Version: Unknown [Click for support]
        Silverlight: Version: 4.0.60129.0 [Click for support]
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        DivXBrowserPlugin: Version: 2.1 [Click for support]
        Flash Player: Version: 16.0.0.305 - SDK 10.6 Outdated! Update
        iPhotoPhotocast: Version: 7.0 - SDK 10.7
        googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Click for support]
        QuickTime Plugin: Version: 7.6.6
        AdobePDFViewer: Version: 10.0.3 [Click for support]
        SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
        JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Check version
    Safari Extensions: ℹ️
        Searchme  [Adware! - Remove]
        DivX Plus Web Player HTML5 <video>
    ***The first extension in safari is adware and can be uninstalled
    ***The second one is a video web player and you could probably remove that as well but it wont effect your speed
    Audio Plug-ins: ℹ️
        iSightAudio: Version: 7.6.6
    3rd Party Preference Panes: ℹ️
        Akamai NetSession Preferences  [Click for support]
        CodeMeter  [Click for support]
        DivX  [Click for support]
        Flash Player  [Click for support]
        Growl  [Click for support]
    Time Machine: ℹ️
        Time Machine information requires OS X 10.7 "Lion" or later.
    Top Processes by CPU: ℹ️
            14%    firefox
             5%    WindowServer
             0%    ps
             0%    fontd
             0%    DirectoryService
    Top Processes by Memory: ℹ️
        528 MB    firefox
        176 MB    Finder
        159 MB    AntiVirus
        112 MB    WindowServer
        82 MB    mds
    Virtual Memory Information: ℹ️
        1.07 GB    Free RAM
        1.29 GB    Active RAM
        1.01 GB    Inactive RAM
        784 MB    Wired RAM
        962 MB    Page-ins
        3 MB    Page-outs
    Diagnostics Information: ℹ️
        Mar 20, 2015, 07:32:46 PM    Self test - passed
    ***Everything else seems fine

  • I have 2 imac computers and here are my questions: first, how to I transfer the information from my contact directory from my old imac into my new imac and once the information is transfered how can I print it? Second: I have a large music collection in m

    have 2 imac computers and here are my questions: first, how to I transfer the information from my contact directory from my old imac into my new imac?  Once the information is transfered how can I print it? Second: I have a large music collection in my old Imac computer how do I transfer this information to my new computer? Also how can I share this information with other computers at home?

    I think you may find helpful information here:
    A Basic Guide for Migrating to Intel-Macs
    The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
    If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate.  Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
    Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
    Classic Environment, and subsequently any Mac OS 9 or earlier applications
    Screensavers written for the PowerPC System Preference add-ons
    All Unsanity Haxies Browser and other plug-ins
    Contextual Menu Items
    Applications which specifically require the PowerPC G5 Kernel extensions
    Java applications with JNI (PowerPC) libraries
    See also What Can Be Translated by Rosetta.
    In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
    If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
    If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
    The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
    Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior, TechTool Pro , SuperDuper , and Drive Genius  work properly on Intel-Macs with Leopard.  The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries.  Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
    Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
    Additional links that will be helpful to new Intel-Mac users:
    Intel In Macs
    Apple Guide to Universal Applications
    MacInTouch List of Compatible Universal Binaries
    MacInTouch List of Rosetta Compatible Applications
    MacUpdate List of Intel-Compatible Software
    Transferring data with Setup Assistant - Migration Assistant FAQ
    Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking will work better when moving from PowerPC to Intel Macs.  The initial section below discusses Target Disk Mode.  It is then followed by a section which discusses networking with Macs that lack Firewire.
    If both computers support the use of Firewire then you can use the following instructions:
    1. Repair the hard drive and permissions using Disk Utility.
    2. Backup your data.  This is vitally important in case you make a mistake or there's some other problem.
    3. Connect a Firewire cable between your old Mac and your new Intel Mac.
    4. Startup your old Mac in Transferring files between two computers using FireWire.
    5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
    If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
    1. Set up a local home network: Creating a small Ethernet Network.
    2. If you have a MacBook Air or Late 2008 MacBook see the following:
    MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
    MacBook Air- Migration Tips and Tricks;
    MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
    Copy the following items from your old Mac to the new Mac:
    In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
    In your /Home/Library/ folder:
    /Home/Library/Application Support/AddressBook (copy the whole folder) /Home/Library/Application Support/iCal (copy the whole folder)
    Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
    /Home/Library/Keychains (copy the whole folder) /Home/Library/Mail (copy the whole folder) /Home/Library/Preferences/ (copy the whole folder) /Home /Library/Calendars (copy the whole folder) /Home /Library/iTunes (copy the whole folder) /Home /Library/Safari (copy the whole folder)
    If you want cookies:
    /Home/Library/Cookies/Cookies.plist /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
    For Entourage users:
    Entourage is in /Home/Documents/Microsoft User Data Also in /Home/Library/Preferences/Microsoft.
    Credit goes to Macjack for this information.
    If you need to transfer data for other applications please ask the vendor or ask in the  Discussions where specific applications store their data.
    5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
    Written by Kappy with additional contributions from a brody.Revised 5/21/2011

  • HT203175 I have attempted to sync my new iPod touch 4th gen. with my current PC running Windows XP and everytime I attempt it I get the dreaded blue screen, here are the error codes- 0x0000007E; 0XC00000005; 0X00000000; 0XBA51B7C8; 0XBA51B4C4 any suggesti

    I have attempted to sync my new iPod touch 4th gen. with my current PC running Windows XP and everytime I attempt it I get the dreaded blue screen, here are the error codes- 0x0000007E; 0XC00000005; 0X00000000; 0XBA51B7C8; 0XBA51B4C4 any suggestions?

    In the course of your troubleshooting to date, have you worked through the following document?
    iPhone, iPad, or iPod touch: Windows displays a blue screen message or restarts when connecting your device

Maybe you are looking for