HERE Drive stops nav during lockscreen after 20 Mi...

There is a "similar" post regarding HERE Drive not working AFTER being in the background... however I am having a slightly different issue.
When I am using HERE Drive and I lock the screen on my Lumia 520 (running Amber GDR2) the HERE navigation will work for about 15-20 minutes and then all of a sudden it just stops navigating and giving directions. If I unlock the phone HERE will re-calculate and start navigating again, lock the screen and 15-20 minutes later... stops navigating again.
I've tried disabling the "Battery saver" feature in HERE Drive with no improvement, and it doesn't make a difference if HERE Drive is in the Background while the screen is locked or in the "foreground" while the screen is locked in either case 15-20 minutes into a drive it will just stop navigating.
HERE Drive is ALMOST the perfect solution because when using offline maps and running under lockscreen I only use about 1-2% of the battery every 20-30 minutes. But if the application is going to just stop functioning under lockscreen then there is no value in that feature.
Anyone have any ideas as to what may be causing this or any advise on a fix/workaround?

When reading my report, I forgot to mention how the external hard drive is formatted :
Hard Drive FW/USB:
Manufacturer: LaCie
Model: 0x0
GUID: 0xD04B78070AD64B
Maximum Speed: Up to 400 Mb/sec
Connection Speed: Up to 400 Mb/sec
Sub-units:
Hard Drive FW/USB Unit:
Unit Software Version: 0x10483
Unit Spec ID: 0x609E
Firmware Revision: 0x110
Product Revision Level:
Sub-units:
Hard Drive FW/USB SBP-LUN:
Capacity: 298.09 GB
Removable Media: Yes
BSD Name: disk1
Mac OS 9 Drivers: No
Partition Map Type: APM (Apple Partition Map)
S.M.A.R.T. status: Not Supported
Volumes:
Aristotle:
Capacity: 297.97 GB
Available: 164.85 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s3
Mount Point: /Volumes/Aristotle
Raf

Similar Messages

  • Adobe BRIDGE CS 5 PHOTO DOWNLOADER freezes and/or stops working during download after 2 years of use

    Adobe BRIDGE CS 5 PHOTO DOWNLOADER freezes and/or stops working during download after 2 years of use. I have uninstalled/re installed twice, cleaned system, adjusted Bridge settings with no change. And I have found no helpful troublshooting tips in forum or on web.

    Does it freeze with other type of cards.  Have seem some post that suggest an imbedded CODEC on the flash card can cause file corruption in Bridge and Mac Finder.
    To access the crash log it is officially called the event log.  To access us OS Help. 

  • AMD Display Driver Stopped Responding Pop Up After Monitor Goes Black

    HP Pavilion Elite HPE 400z PC
    [Edited for Personal Information]
    AMD Athlon X4 635 quad-core (2.9GHz)
    512MB ATI RadeonHD5450
    Windows 7 Home Premium 64 Bit
    Purchased 1/2011.  Early on and continually getting worse to the point this happens several times a day.
    Screen goes black instantly.  Within seconds it boots back up and pop up says AMD Display Driver Stopped Responding.  This happens under all conditions, every day, usually when on the internet.  I tried to download an updated driver on your site and it detected my computer and printer but when I went to download updated driver software it said it did not detect my computer.
    Please give me exact steps to take.   Thank You!!

    You are getting low on system resources and it is affecting your onboard video memory allocation. Perform the steps in this document and things should improve:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&​dlc=en&docname=c01817290&lc=en
    ... an HP employee expressing his own opinion.
    Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

  • External hard drive stopped working on Mac after attempt to connect it to a PC

    I have an external hard drive that is new and has been working beautifully.  It is formatted for a Mac.  Forgetting this, I tried to plug it into a PC. Of course it didn't work, but now when I try to plug it into my Mac it doesn't mount. How can I fix it?

    Try repairing it, per #6 in Using Disk Utility.

  • HERE Drive + Beta constantly crashes after upgrade...

    After i upgraded to Here Drive + Beta on my Lumia 920, the app constantly crashes when i start it!
    I have tried to restart the phone, uninstall the app, and reinstall....but it still crashes! The other Here-apps is ok, and works fine!
    Didn't anyone at Nokia tested this properly before releasing the upgrade!!!???
    I hope you guys at Nokia have an upgrade to fix this problem quickly because one of the main reasons that i bought a Nokia again was the Maps and Drive function with offline maps!!
    Solved!
    Go to Solution.

    Update!
    Today i reset my Lumia 920 back to factory settings, and for a short while.... the Here Drive worked all fine....
    But suddenly... the error came back, and Here Drive was starting to crash again!
    And by the way... restoring the phone is a pretty big job!
    Especially when this happens also:
    http://www.wpxbox.com/how-to-fix-downloading-application-error-code-8000ffff-after-windows-phone-8-r...
    I think the word i'm looking for is.....**bleep**!
    So i really hope that Nokia understand the frustration this is for me and other owners and come up with a quick fix!

  • Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.

    My Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.. I wonder what's the work around or troubleshooting to fix this. Thanks!

    try and Reset the System Management Controller (SMC)

  • Hard drive stop spinning after a while

    I have a Lenovo laptop, running Arch Linux + KDE. I noticed that when I am on battery, the hard drive stop spinning after a while, and it's very annoying to listen the disk starting again, and again. and again. I'm not interested in save energy with this, so how can I deactivate it?
    I thought it was the laptop-mode, but I runned a systemctl status laptop-mode.service, and the service is inactive. Any idea of what could be triggering this?

    man hdparm. Check out -B and -S flags. hdparm -B255 -S0 /dev/your_drive should disable any powersaving settings altogether.
    You could use udev rule to run hdparm when you swithch to battery, but there are probably more elegant solutions as well.
    KDE might handle this via its own power settings as well. I haven't really used KDE ever, so I'm not sure about this, but it's still possible.

  • Lumia 925 ATT Here Drive+ issue after Cyan

    I've noticed that on my 925 Here Drive+ doesn't recognize addresses that it previously did. It can find the address just fine from Here Maps, and will give turn by turn directions when you start navigation from there, but not when you use the people hub to quickly navigate to an address from a contact. Pops up a dialog that says no address was found.
    I've done a soft reset etc, did a full erase and update, not from a backup, everything from scratch.
    I would appreciate any advice you might have, one if my most used features.

    Same problem here.
    Had the Lumia 925 for nearly a year - without any problems ever.
    Since the Cyan update the phone often freezes, which it never did before. The only way to bring it back to life is the Power+VolumeDown button combination.
    On the first few freezing occasions the glance screen was showing and stuck, and it was charging via USB.
    I have reset the phone (from Settings -> Phone), and turned the glance screen to "Peek", which appears to have reduced the occurrences of freezing, but it still happens.
    From my observation freezing is more likely during charging, but that may have been a coincidence. It has also occurred while not charging.
    3G, Data connection, and location were on in all cases of freezing, WiFi and NFC were off in all cases.
    This is a _very_ serious bug that should get lots of attention immediately! The threads about it fill in several locations, at wpcentral, MSDN, etc. (it apparently affects several Lumia models).
    Are there experiences with using the Nokia Software Recovery Tool? It will apparently reset the Lumia 925 to a pre Cyan state. If I then install the updates, including Cyan, again, will there be a chance of the freezing problem to be gone? Or should I refrain from installing the Cyan update again for the time being if I want the phone to be reliable?

  • Here Drive + license after hard reset ?

    I have a nokia lumia 520 and bought a license here drive + after resetting my phone appears not licensed

    Hi @kmisike ,
    The Drive+ purchase is tied to your Microsoft account, just as any other app:
    http://here.com/help/search/purchase/wp8:drive/#howcanigetheredrivebackifihave
    Note that if your phone had initially HERE Drive version and you have purchased an upgrade to HERE Drive+, you don't need to purchase the app again. All of your Windows Phone app purchases are tied to your Microsoft account. You can download and re-install any app you've purchased by logging in to the Windows Phone Store.

  • I restart my mac air accidentally during reinstallation, after I restart the machine again, I lost all the drives in my computer including win OS. what can I do?

    I restart my mac air accidentally during reinstallation, after I restart the machine again, I lost all the drives in my computer including win OS. what can I do?

    This is not a reply. I just want to elaborate on this problem.
    My computer freezes occasionally when it is used after being sleep for a while. The spinning ball appears and everything is totally disabled. Nothing on the keyboard works.
    The mouse moves, but does not work.
    The only solution is to turn the power off and on (losing all data in open applications.)
    I kept the System monitor running on the side to find out which program was running when the computer froze. The Monitor as well as all other applications froze, but the data showed:
    Firefox 18.4%
    Activity Monitor 0.9%
    Firefox Plugin 0.2%
    This is all the information I have. By the way, I am using iMac with OS 10.6.

  • Macbook pro optical drive stopped working after installation of mavericks

    macbook pro optical drive stopped working, just spins and won't eject, ever since I upgraded to Mavericks, thoughts?

    I have the same problem and was advised by someone to reset System Management Controller (SMC). I haven't tried it yet though. I wish it could fix it. Let's give it a shot!

  • Satellite A500 - Display driver stopped responding

    Hi,
    3 weeks ago I bought brand new Toshiba A500. I post here because I didn't find any helpful solution.
    Here is specification:
    Processor: intel core i3 M330 2.13GHz
    Graphic: NVIDIA GeForce GT 330M (1024 MB)
    Hard drive: MJA2320BH G2 (320 GB, 5400 RPM, SATA-II)
    RAM: 2X 2 GB DDR3-1066 DDR3 SDRAM (7-7-7-20 @ 533 MHz) (6-6-6-18 @ 457 MHz)
    Audio: Realtek ALC272 @ Intel Ibex Peak PCH
    System: Windows 7 64bit - directed from Toshiba
    The issue is: at random situations, the screen is turn black for a couple of seconds, then the message is pop up saying "Display driver stopped responding and has recovered - display driver NVIDIA Kernel Mode Driver, Version 187.98 stopped responding and has successfully recovered." It happens several times per day.
    Sometimes display driver can't be recovered and than system hangs and must be reset. Problem occur at first day after five minutes of using (when there wasn't install anything without OS).
    Problem occurs always during normal working with applications (MS office, firefox, etc.). It's completely random - there in not two the same situations - so when I watch hd films in youtube on full screen it crashes several times, but when I restart OS and than play the same movie it works correctly.
    Application causes this problem is called TDR (Time-out Detection and Recovery).
    This application reset GPU when didn't get respond during 2 sec. But in Windows7 registry doesn't have entries controlled this application.
    Since than I tried following solutions:
    - BIOS update;
    - System reinstall;
    - Display driver update to version 197.16;
    - Checking temperature on graphic card (when issue occurs temperature on graphic card didn't exceed 47deg, and processor 36deg);
    - Java update (older version of Java can causes some device problems);
    - Adobe update (same as Java);
    - Turn off aero;
    - Windows 7 updates;
    - Turn off audio (realtek card);
    None of them works.
    The problem didn't occur during playing games (i.ex. Witcher). I can play 8 hours and nothing weird happens.
    I notice also that problem occurs during opening some applications or entering new tasks (when energy demand rapidly increases).
    I wondering that is some driver problem or I should return the laptop to the service.
    I suspect that problem can be to big difference in voltage on graphic card but I can't verified that.
    If somebody meet with this problem I will appreciate any help.

    hi,
    i had the same issue with my A500-1dn equipped with GT 230 M, getting the message ,,Display driver stopped responding,,. I updated the card graphic driver from nvidia.com 3 weeks ago and since that time it' s gone ( I hope forever).

  • External Drive Stops Responding [sorry, not FCP related]

    Sorry, I didn't realized I posted this under Final Cut Pro. However, if you have a suggestion, heres the link for the new one:
    http://discussions.apple.com/message.jspa?messageID=8913406#8913406
    Message was edited by: oatmealsnap
    I have a Western Digital 500GB Studio Edition. The drive works fine with transferring small amounts of data (a few GBs), but when I try to use Time Machine to back my whole computer up (~70GB), at some point the drive stops responding. There is no pattern as to where when it stops working, it could be 17kb, it could be 69BG, but I have never been able to complete a backup.
    What happens is that after a certian amount of time, the drive just stops responding. The "Ready light" is on, as if it is just waiting for me to use it, and Time Machine thinks it is still backing up, but its not. This also happens outside of Time Machine, if I just have the drive running for a while, the drive stops working. This is also accompanied by Finder freezing up until I unplug the drive. Sometimes (but not every time) I also have to unplug the drive from the outlet in order to get it to respond again.
    This may be unrelated, but I am using Firewire 800, which, as I understand, should be able to transmit data at 800MB/s, but it is dramatically less than that. Again, the speed varies, but it is usually around just a few MB per second. I understand that this vary with the drive and computer, but I think that a year old drive/MBP should be able to transfer data close to 800MB/s.
    I have a windows partition, and I experienced the same problems, especially when playing game stored on the drive. I recently got an eSATA ExpressCard, but unfortunately the drivers are only available for Windows. I haven't had any problems with the drive not responding since I have been using the ExpressCard, and data transfers have been very fast (again, not sure how fast, but games now run like they did on my internal hard drive).
    I made sure my drivers were updated, I even installed the "WD Turbo Drivers". The Partition Map Scheme is GUID Partition Table. Under Energy Settings in System Preferences, I unchecked the box "Put the Hard Disk to sleep when possible".
    I can't seem to find anyone else who has had this problem in the forums, or elsewhere. Any suggestions would be greatly appreciated.
    Thanks

    FW800 has a theoretical limit of 800 mb/s - that's mega bits (not bytes). The firewire bridge chip and hard drive's ability to spool do not usually even come close to that theoretical limit.
    Still it sounds like your hard drive is not working. I'd get everything off it, reformat it and start over.
    The reality of the situation is your mybook is not designed for video editing. I guess they do back ups fine but not much else. Your best path would be to either a) get an external hard drive designed to be used for editig - Caldigit, granite digital, etc or, if your computer suppports them, populate your internal bays with sata drives and use those as media drives.
    Good luck.
    x

  • External Drive Stops Responding

    I have a Western Digital 500GB Studio Edition. The drive works fine with transferring small amounts of data (a few GBs), but when I try to use Time Machine to back my whole computer up (~70GB), at some point the drive stops responding. There is no pattern as to where when it stops working, it could be 17kb, it could be 69BG, but I have never been able to complete a backup.
    What happens is that after a certian amount of time, the drive just stops responding. The "Ready light" is on, as if it is just waiting for me to use it, and Time Machine thinks it is still backing up, but its not. This also happens outside of Time Machine, if I just have the drive running for a while, the drive stops working. This is also accompanied by Finder freezing up until I unplug the drive. Sometimes (but not every time) I also have to unplug the drive from the outlet in order to get it to respond again.
    This may be unrelated, but I am using Firewire 800, which, as I understand, should be able to transmit data at 800MB/s, but it is dramatically less than that. Again, the speed varies, but it is usually around just a few MB per second. I understand that this vary with the drive and computer, but I think that a year old drive/MBP should be able to transfer data close to 800MB/s.
    I have a windows partition, and I experienced the same problems, especially when playing game stored on the drive. I recently got an eSATA ExpressCard, but unfortunately the drivers are only available for Windows. I haven't had any problems with the drive not responding since I have been using the ExpressCard, and data transfers have been very fast (again, not sure how fast, but games now run like they did on my internal hard drive).
    I made sure my drivers were updated, I even installed the "WD Turbo Drivers". The Partition Map Scheme is GUID Partition Table. Under Energy Settings in System Preferences, I unchecked the box "Put the Hard Disk to sleep when possible".
    I can't seem to find anyone else who has had this problem in the forums, or elsewhere. Any suggestions would be greatly appreciated.
    Thanks

    You're probably right, that it's some problem with the drive. You might want to search this forum for similar posts, also see what Western Digital might have to say. I don't have any experience with WD, but some drives have sleep/inactivity settings that don't play well with TM.
    But to be sure there isn't a TM problem, like a file it doesn't like, download the +Time Machine Buddy+ widget from: http://www.apple.com/downloads/dashboard/status/timemachinebuddy.html. It shows the messages from your logs for one TM backup run at a time, in a small window.
    If you see something there that seems suspicious, copy and post the messages here (be sure to get them all, as sometimes they overflow the small window).

  • Lumia 1520 + here drive+ tooo hot - switch off

    With the latest version of Here Drive, i can't use it as it get very hot around the camera, then, the phone switch off and the windows button pulse every 1 second... Once cooled down? The phone restart automatically
    if i restart here drive, enter my destination and start the navigation, the phone switch off again about 1 to 2 min later and the same cycle happen again... Also, my battery drained very quickly (even if plug on the car charger via usb!)
    it is quite annoying when the sat nav stop and you don't know where you are... Restarting while driving is quite dangerous as well...
    if i don't use here drive, the phone behave as expected... I didn't had this issue with the previous version...
    how can this be fixed... Otherwise here drive, an app which i love an make me choose Lumia, become useless...
    please help

    happytoon,
    Presumably the warranty is still valid for your 1520, you may send it to a Nokia Care Centre to get it checked. Information on Nokia Care Points can be obtained by following through this link http://www.nokia.com/global/support/locations.
    Good luck

Maybe you are looking for