Here's a possible solution for those w/Ellipsis 7 memory problems

My husband is having the exact same problem with his Ellipsis 7 tablet that MANY of you have posted about: not enough app space memory. Meanwhile, I have the same tablet, purchased at the same time and place with NO PROBLEMS.
After help from ANTHONY (amazing assistance) thru Verizon Tech Support, we found the difference in our tablets and a SOLUTION.
CHECK YOUR TABLET'S SOFTWARE VERSION by:
1. going to Settings,
2. clicking on About Tablet, and
3. scrolling down to Software Version.
You want it to say MV7A_31D25_422A (my tablet) and NOT MV7A_31D26_422 (my husband's).
My husband's tablet is going back for his software to be reconfigured to match mine. I understand your frustration and truly hope this solves your problem as well.

I spent 6 hours trying to get itunes to recognize my
nano the first time and none of the "troubleshooting"
tips worked. I was getting the message "the software
to connect with your ipod is not installed properly"
when I'd try to connect my nano. Windows was
recognizing it, but iTunes wasn't. Here's how I
solved the problem.
1. click on the start button in the lower left
corner.
2. select Settings and click Control Panel
3. select Administrative Tools (you may need to
switch to "Classic Look", located on the left hand
side if you're using XP before you can see the
Administrative Tools folder)
4. select Services
5. scroll down the list of services on the right hand
side of the Services window and look for iPodService
6. look across the iPodService for the Startup Type
column (it should will say either Automatic, Manual,
or Disabled)
7. double-click on whatever it has listed for
iPodService under Startup Type (it will probably have
Manual, or Disabled)
8. a pop-up window will appear, under the General tab
in the middle of the window will be a drop-down
window, select Automatic
9. click Apply
You should be good, to go from here. It worked for
me. I recommend re-starting your computer, but it
might not be necessary. After I switched iPodService
to Automatic I haven't had a lick of trouble
connecting my Nano.
I hope this helps.
HP Pavilion 8756c (I
think) Windows XP Pro
I have windows XP and I don't have settings only control panel, but its different. It's for changing the color of your desktop background and all that. Do you know any other way to get to it?

Similar Messages

10.5.3 update -A possible solution for those who have hard spinning fans!!!

Hey people!
I've been diggin around the internet for a solution to this problem... I couldn't find anything at all till I started to mess with my macbook around... I tried to reindex the spotlight by deleting the previous indexed list of files with an app called "spotless" but nothing happened. I even tried to reset the SMC - system management controller - but still nothing happened... I tried some other things out but I had come out unsuccessful TILL... I remembered myself to try all this out in safe mode....
This was so far the strangest thing I've ever experienced on a mac... by entering in safe mode the fans just started to ramp down and my laptop returned to what it used to be! Just that - entering on safe mode! After entering and after listening to the fans loosing speed, I rebooted in normal mode and my laptop was healthy again!
To start up into safe mode (to "Safe Boot"), do this:
- Be sure the computer is shut down.
- Press the power button.
- Immediately after you hear the startup tone, press and hold the Shift key.
Tip: The Shift key should be held as soon as possible after the startup tone but not before.
Release the Shift key when you see the gray Apple and progress indicator (looks like a spinning gear).
P.S. - if you get lucky with this procedure just reply me and spread the word!
Good luck!
Rui Caldeira
Message was edited by: Caldeira

Actually... it really solved the problem for me! My computer have sounded like a jet plane for the last couple of days. But I'm not sure if the only solution is to boot into safe mode. I recommend you to do like this:
1.) Remove the spotlight indexes and disable the service if you don't use it. You can use Spotless to do this. You find it here: http://mac.softpedia.com/progDownload/Spotless-Download-9834.html
2.) Reset the SMC. Om a MacBook, you turn the computer off and remove AC and the battery. Hold the power button for about 10 seconds. Insert the AC but NOT the battery and boot the computer. Shut it down and install the battery.
3.) After the SMC reset, boot the computer into safe mode by holding the shift key during boot up.
4.) Let the fans spin down in safe mode for a couple of minutes.
5.) Restart the computer into normal mode and the fans should now be spinning normally again!
This worked for me, but only in the order above!
/D

Possible solution for those suffering from poor battery life - data dropouts etc...

I was having the same bizarre data dropouts - an FDR and cache wipe with no app/data/settings restore fixed it for me, yes it IS a pain in the rear - YES it will take a couple hours if you have a ton of apps and accounts - YES it IS worth it, phone is working as it should now!
Cache Wipe:
Press and hold the Power button and turn the phone off.
When the screen turns off, press and hold Volume Down and Power.
When the white HBOOT screen appears, use the volume button to move down to “RECOVERY.”
Press the Power button to select “RECOVERY.”
When the triangle and exclamation appears, hold the Volume Up and Power button at the same time.
Using the volume button, scroll down to “Wipe cache partition” and select it.
Select “Reboot system now.”
Before doing the FDR do this:
Menu-->System Settings-->Privacy-->under the Backup & Restore items clear the Automatic Restore checkbox.
***NOTE*** By doing this you will lose everything on the phone and internal storage(NOT on the microSD) - you will have to manually reinstall all apps, setup all accounts etc...it take awhile to do but it has solved 99% of the issues I was having: dragginess, dropped 4G, poor battery life etc...
Factory Data Reset
From the screen of your phone, press the Menu button
Tap System Settings.
Scroll down and tap Privacy
Tap Factory Data Reset
Check Erase internal storage if you would like to erase all the data on the phone internal storage such as applications, music, movies or photos.
Tap Reset Phone

There is a little easier Way to Navigate in Doing an F.D.R. than that Method: I listed it here if you prefer going this Route..
2. Re: FACTORY RESET FOR RAZR AN RAZR MAXX

Possible solution for those of us who can't pause our purchased songs

Well, a bunch of us can't play songs purchased from the iTMS store. One workaround i found is to use this program called "HYMN" (http://www.hymn-project.org/) which will strip the protection from the song and allow you to play it. However, it doesn't work if you're using iTunes 6.0. seems a little drastic, but believe it or not, we want to be able to listen to the songs we buy.
iBook G4

Interesting my n75 syncs with Missing Sync. But my friends does not and it won't pair with the Mac running Leopard as well. Sounds just like the firmware issue that the n73 has.
My n75 has firmware V 10.2.055 connects and syncs to Leopard
My friend has firmware V 20.1.172 connects to Tiger, does not connect to Leopard.
To see your firmware version, type *#0000#
n73 issue here:
http://discussions.apple.com/thread.jspa?messageID=7382399&#7382399
https://support.markspace.com/index.php?m=knowledgebase&a=viewarticle&kbarticleid=298

PrintWindow api with possible solution for capture screenshot Google Chrome window

Hi,
as all you know, PrintWindow api give us a black image when us want a capture screenshot of Google Chrome window. So, a friend said me that a possible solution for this problem is:
Reduce Google Chrome window for -1px in both sides and after this, reset to original size. And so, will repaint again.
Based on code below, someone could help me make this? sincerely I don't know where begin.
[DllImport("user32.dll", SetLastError = true)]
static extern IntPtr FindWindow(string lpClassName, string lpWindowName);
[DllImport("user32.dll", SetLastError = true)]
static extern IntPtr FindWindowEx(IntPtr hwndParent, IntPtr hwndChildAfter, string lpszClass, string lpszWindow);
[DllImport("user32.dll")]
private static extern IntPtr GetDC(IntPtr WindowHandle);
[DllImport("user32.dll")]
private static extern void ReleaseDC(IntPtr WindowHandle, IntPtr DC);
[DllImport("user32.dll")]
private static extern IntPtr GetWindowRect(IntPtr WindowHandle, ref Rect rect);
[DllImport("User32.dll", SetLastError = true)]
[return: MarshalAs(UnmanagedType.Bool)]
static extern bool PrintWindow(IntPtr hwnd, IntPtr hDC, uint nFlags);
[StructLayout(LayoutKind.Sequential)]
private struct Rect
public int Left;
public int Top;
public int Right;
public int Bottom;
public static Bitmap Capture(IntPtr handle)
Rect rect = new Rect();
GetWindowRect(handle, ref rect);
Bitmap Bmp = new Bitmap(rect.Right - rect.Left, rect.Bottom - rect.Top);
Graphics memoryGraphics = Graphics.FromImage(Bmp);
IntPtr dc = memoryGraphics.GetHdc();
bool success = PrintWindow(handle, dc, 0);
memoryGraphics.ReleaseHdc(dc);
return Bmp;
private void button1_Click(object sender, EventArgs e)
IntPtr WindowHandle = FindWindowEx(IntPtr.Zero, IntPtr.Zero, "Chrome_WidgetWin_1", null);
Bitmap BMP = Capture(WindowHandle);
BMP.Save("C:\\Foo.bmp");
BMP.Dispose();
Any suggestions here is appreciated.

Hello,
I would prefer capture the screen rather than get it from that application directly.
It has been discussed in the following thread.
Is there any way to hide Chrome window and capture a screenshot or convert the Chrome window to image?
In this case, you could remove the line "ShowWindowAsync(mainHandle, 0); " since you don't want to hide it.
using System;
using System.Runtime.InteropServices;
using System.Diagnostics;
using System.Drawing.Imaging;
[DllImport("user32.dll")]
private static extern bool ShowWindowAsync(IntPtr hWnd, int nCmdShow);
[DllImport("user32.dll")]
public static extern bool GetWindowRect(IntPtr hWnd, out RECT lpRect);
[DllImport("user32.dll")]
public static extern bool PrintWindow(IntPtr hWnd, IntPtr hdcBlt, int nFlags);
public WhateverMethod()
//initialize process and get hWnd
Process chrome = Process.Start("chrome.exe","http://www.cnn.com");
//wait for chrome window to open AND page to load (important for process refresh)
//you might need to increase the sleep time for the page to load or monitor the "loading" title on Chrome
System.Threading.Thread.Sleep(4000);
chrome.Refresh();
IntPtr mainHandle = chrome.MainWindowHandle;
RECT rc;
GetWindowRect(mainHandle, out rc);
Bitmap bmp = new Bitmap(rc.Width, rc.Height, PixelFormat.Format32bppArgb);
Graphics gfxBmp = Graphics.FromImage(bmp);
IntPtr hdcBitmap = gfxBmp.GetHdc();
PrintWindow(mainHandle, hdcBitmap, 0);
gfxBmp.ReleaseHdc(hdcBitmap);
gfxBmp.Dispose();
bmp.Save("c:\\temp\\test.png", ImageFormat.Png);
ShowWindowAsync(mainHandle, 0);
[StructLayout(LayoutKind.Sequential)]
public struct RECT
private int _Left;
private int _Top;
private int _Right;
private int _Bottom;
public RECT(RECT Rectangle)
: this(Rectangle.Left, Rectangle.Top, Rectangle.Right, Rectangle.Bottom)
public RECT(int Left, int Top, int Right, int Bottom)
_Left = Left;
_Top = Top;
_Right = Right;
_Bottom = Bottom;
public int X
get { return _Left; }
set { _Left = value; }
public int Y
get { return _Top; }
set { _Top = value; }
public int Left
get { return _Left; }
set { _Left = value; }
public int Top
get { return _Top; }
set { _Top = value; }
public int Right
get { return _Right; }
set { _Right = value; }
public int Bottom
get { return _Bottom; }
set { _Bottom = value; }
public int Height
get { return _Bottom - _Top; }
set { _Bottom = value + _Top; }
public int Width
get { return _Right - _Left; }
set { _Right = value + _Left; }
public Point Location
get { return new Point(Left, Top); }
set
_Left = value.X;
_Top = value.Y;
public Size Size
get { return new Size(Width, Height); }
set
_Right = value.Width + _Left;
_Bottom = value.Height + _Top;
public static implicit operator Rectangle(RECT Rectangle)
return new Rectangle(Rectangle.Left, Rectangle.Top, Rectangle.Width, Rectangle.Height);
public static implicit operator RECT(Rectangle Rectangle)
return new RECT(Rectangle.Left, Rectangle.Top, Rectangle.Right, Rectangle.Bottom);
public static bool operator ==(RECT Rectangle1, RECT Rectangle2)
return Rectangle1.Equals(Rectangle2);
public static bool operator !=(RECT Rectangle1, RECT Rectangle2)
return !Rectangle1.Equals(Rectangle2);
public override string ToString()
return "{ + _Left + "; " + " + _Top + "; Right: " + _Right + "; Bottom: " + _Bottom + "}";
public override int GetHashCode()
return ToString().GetHashCode();
public bool Equals(RECT Rectangle)
return Rectangle.Left == _Left && Rectangle.Top == _Top && Rectangle.Right == _Right && Rectangle.Bottom == _Bottom;
public override bool Equals(object Object)
if (Object is RECT)
return Equals((RECT)Object);
else if (Object is Rectangle)
return Equals(new RECT((Rectangle)Object));
return false;
And the key method used is the one shared in
Get a screenshot of a specific application.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Buy my problem of camels Store Lee games possible solution for me my problem?

Buy my problem of camels Store Lee games possible solution for me my problem?

This worked for me, sort of. A while back when I downloaded that windows update that installed the new version of IE, I noticed that IE wouldn't connect to the internet and pages wouldn't load. However, I thought nothing of it because I use Firefox and FF was working just fine.
I went into IE earlier this evening (it still wasn't working) and tried to follow your recommended steps. I got up to step 4 and IE froze. I tried closing it, reopening it and repeating the steps but it would always freeze at step 4. In another thread, someone was saying that iTunes released a security update and that fixed the store for them so I tried opening Apple Software Update and that froze. I tried it several times, nothing. Would always freeze. I even tried updating thru iTunes and IT would freeze.
Finally, I went to the control panel and uninstalled IE7. The iTunes store and the Apple Software Update program are now working! So thank you very much for your suggestion. Otherwise, it may have never clicked with me that IE was the problem.
Windows XP

Solution for those People having sleep and shut down problem.

Solution for those People having sleep and shut down problem.Go CONTROL PANEL
select RECOVERY
select OPEN SYSTEM RESTORE
then restore your laptop
This process work for me Please comment below if it was helpful toyou

As I said, a weak or dead PRAM battery can reportedly cause odd startup issues. If it has never been changed in six years, that's a really long-lasting battery, even if the iMac was kept on continuously.
They are pretty cheap from the right source, so you may want to try changing it.
http://eshop.macsales.com/item-specials/Newer%20Technology/BAA36VPRAM/

Possible solution for problems printing with ICC profiles - esp. R2400

(N.B. This is long because I've decided to go in to details about the background of the problem etc.. Also note that whilst my experience is with the Epson R2400, anyone with problems printing using ICC profiles in Aperture may find this post helpful, as will be explained further down the post.)
Ok, here's the situation. I've been an Aperture user for over a year, and an R2400 owner for half a year. In that time I have done a huge amount of experimenting, but I've never managed to get Aperture to work perfectly with Epson's 'premium' R2400 ICC profiles - the ones you can download from their site which are better than the ones provided 'in the box'. This hasn't been too big a deal because, in fact, the R2400 does a rather good job just set to 'System Managed' in Aperture and 'Epson Vivid' with a gamma of 1.8 in the printer driver. Nevertheless, it really annoyed me that something that should work wasn't, which is why I've spent a lot of time trying to figure out what's going on. Having said that, I have come across a method which will give you pretty good prints out of your Epson R2400 using the premium profiles in Aperture - it's not perfect, but it's the best you're going to get if you want to use those profiles in Aperture. I understand the words 'it's not perfect' aren't what photography experts would probably want to hear, however, I have seen a few anguished posts from R2400 owners in here before, so I think some people may find it useful.
The whole reason why Aperture is hopeless at using the R2400's premium profiles is because - unusually - their default rendering intent is set to 'relative colorimetric' rather than 'perceptual'. You might say 'but that's good - it means you get more accurate colours!', and if you do, you're right... however, there's a snag. To get an image to reproduce well using Epson's premium profiles and relative colorimetric rendering, you really need to use black point compensation. This is where the trouble lies: Aperture's black point compensation is diabolical to the point of being unusable when used with relative colorimetric rendering - I feel I need to be awarded compensation every time I've ever tempted to use the setting. So because BPC in Aperture is unusable, that effectively makes the premium profiles unusable too, because Aperture always uses the default rendering intent specified in the profile.
The solution? Use perceptual rendering instead. Ok, so you can't change the rendering intent in Aperture, which makes that sound a tad difficult. However, as I said in the above paragraph, Aperture always obeys the default rendering intent specified in the profile... so you can see where we're going with this: we need to change the ICC profiles' default rendering intent from 'relative colorimetric' to 'perceptual'. I did some digging around and found one or two expensive pieces of software that could do that... but then I found that, lo and behold, the Mac OS has a command-line utility which can do the job for us, for precisely £0.00. It's called SIPS or 'Scriptable Image Processing System', and you can find out some information about it here: http://developer.apple.com/technotes/tn/tn2035.html#TNTAG58 For those who don't like reading technical jargon however, here's what you need to do to convert a profile's rendering intent. First go to terminal, then type in the following command:
sips -s renderingIntent perceptual
Do not press 'enter' yet. Instead, add a space after 'perceptual', find the ICC profile you want to modify, and click and drag it into the terminal window. You should then find that your command looks something like this:
sips -s renderingIntent perceptual /Users/yourname/folder/RandomProfile.ICC
At which point you can then press 'enter', and the command will execute, giving you an ICC profile which will now make Aperture use perceptual rendering.
There is just one further thing to be aware of after doing this: for some crazy reason, you then need to turn on BPC in Aperture for the prints to come out as good as possible. Black point compensation shouldn't make any difference when using perceptual rendering as the idea of perceptual is that it takes account of things like that anyway, however, in Aperture BPC does make a difference, so remember to turn it on to get a half decent print. In general, I find that prints made using this setup come out pretty well; they almost perfectly match prints made using the profiles with a perceptual intent in Photoshop Elements, except for the fact that Aperture blocks up the shadows a bit more than Photoshop. However, if you can live with that, you might find this is quite a workable solution.
Now, I said near the beginning of this post that all the above can apply to other printers too. Most printer profiles have 'perceptual' set as their default rendering intent, in which case everything I've just said won't be of much help. However, If you are reading this because you're having problems with ICC profiles in Aperture, but you don't use an Epson R2400, find your problematic ICC profile, double-click on it, and take a look at the window that opens: specifically, at the 'Rendering Intent' the window mentions. If it doesn't say 'Perceptual' then it may well be worth trying the steps I've outlined in this post to set it to perceptual, to see if doing so produces an improvement when using the profile in Aperture.
Finally, just one note of caution: if you decide to try out the steps I've detailed above on a paid-for custom-made profile, please back your profile up before messing with it. I haven't experienced any problems when using SIPS to change a profile's rendering intent, but I obviously can't guarantee that it won't do something weird and corrupt your expensive custom-made profile.
If you have any questions, feel free to ask, although (contrary to any impression I may give) I am not a colour-management expert; I'm just someone who doesn't give up when they have a problem that should be solvable.
Thomas
Mac Pro 2.0GHz with 30" ACD; 15" MacBook Pro 2.0GHz Mac OS X (10.4.10)

Thomas
Wow - thanks for such a comprehensive post.
I have Aperture and a 2400 so this information is exceptionally useful to me.
Again - thanks for caring and sharing
Brian

Possible upgrade solution for people who have HD and problems in general.

OK, for me, Leopard has been as painful as going osx from OS9, at least the upgrade has been , dunno about the retail copy., bugs, bugs, bugs with the upgrade for sure.
Here is what happens generally., you upgrade and basically you need to run disk tools from a external drive or the Leopard DVD., the problems move on still.
Solution i found was to back up to another drive, that is right guys, spend another hundred bucks no one warned you about., get a external HD or if your living it high and collect macs as Apple assumes you may just have a second Intel mac laying around with a Sata drive in it to start up in "Firewire Target Mode", (hold the "T" at start up)and start cloning your drive with SuperDuper (also need to purchase)..
Ok
1- once you clone your drive (usualy a hour for the base system alone).
2- erase it as one partition,
3- in the options make sure it is set as GUID partition (takes about a hour) and
4- then as well zero out all the data., takes about 2 hours there as well.
5- Now run disk utilities from the Leopard DVD or the computer or booted up drive you used to do all this., if you can not fix permission of th volume you seen to reformat the Drive again 7 pass!, could take 4 hours.
Finally you will be able re clone it, and run disk tools after a days work no one warned you about.
*This disk utilities operation may take about 1 hour but say 11, and look like this below;*
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/bottom.jpg", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/content.html", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/Description.plist", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/English.lproj/DisplayName.stri ngs", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/thumbnail.png", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/top.jpg", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/English.lproj/DisplayName.strings", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/bg_letter.jpg", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/bg_pattern.jpg", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/bottom.jpg", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/content.html", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/Description.plist", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/English.lproj/DisplayName.strings ", should be 80, group is 99.
*Good luck*
*My ADVISE:* if you experienced these problems, as above, reformatting by zeroing out the data works. as for those who want Leopard. *DO NOT UPGRADE but install a RETAIL version of LEOPARD* until apple has a update,
I read posts where people who have the retail copy (full DVD) have not experienced these problems, mine was a upgrade from Tiger since i got a mac in the last 30 days.
WARNING: it has been hard to trust Apple fanatics with these things now days, many posts are denials to things not working so i could be wrong there as well, been honest saves time is all i can advise them.
If anyone has beter advise please do post it.

And what is yaml all about, shows up in disk utilities for hundreds if not thousands of issues?
showed up as a user as well.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/proxybasicauth-i.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/ProxyAuthenticator/cdesc-ProxyAuthenticator.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/ProxyBasicAuth/cdesc-ProxyBasicAuth.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/ProxyDigestAuth/cdesc-ProxyDigestAuth.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/ProxyDigestAuth/check_uri-i.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/UserDB/cdesc-UserDB.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/UserDB/get_passwd-i.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/UserDB/make_passwd-i.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/UserDB/set_passwd-i.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPProxyServer/cdesc-HTTPProxyServer.yaml", should be 0, group is 99.
------------------------------------------------------------

A possible solution for pushing subscribed calendars to iOS devices

This one has been bugging me for a while and the solutions I've found here and elsewhere didn't work for me.
The problem: I subscribe to four sports schedules via iCloud. I have them set up on an iMac running 10.9.5 and all are configured as iCloud subscriptions. All events show up on the iMac and also on my MacBook. Events from two of those calendars would show up on my iOS devices. Two would not.
Looking into it today, I noticed that on the two that worked, the URL for the subscription (the "subscribed to" field when you do Get Info for the calendar on the Mac) is a URL that ends at the file suffix ".ics". The two that did not work had HTTP parameters that followed the ".ics" at the end (a '?' after ".ics" and a bunch of text following).
On the iMac, I tried removing the parameters so that the URLs ended in ".ics" for those two calendars. And just like that, all of the events now show up on my iOS devices.
Just thought I'd put this out there in case it is the same situation others are running into.

I've done something similar, but I couldn't never get rid of the buffer delay. I had to go to UDP and a custom sliding window protocol, but the the clients have firewall troubles.
TCP stream, client opens?

Safari hanging up? Here's one possible solution.

This report contains one possible solution to Safari hanging up on certain web pages.
Over the past couple of days, my PowerMac G4 started hanging up when I attempted to load certain pages from CareerBuilder.com.
The bottom of those CareerBuilder.com pages always reported that only xx of yy items (say, 32 of 37 items) were completed, then the spinning ball would appear, indicating that Safari had hung up, requiring me to Force Quit it. Those same CareerBuilder.com pages did not cause Safari on my iMac G5 nor my MacBook Pro to hang up, so I concluded that something had gone awry with Safari on the PowerMac G4 only.
Since other postings related to this topic appear to require a Crash Log to analyze what is going on, I checked for a Crash Log both via Console and by searching for one in the Crash Report folder, but there was none to be found there.
I tried pasting the "Problem Details" report that resulted from my most recent Force Quit, but whenever I tried to Post the Message, I would get a message telling me that "We're sorry, Apple Discussions is temporarily unavailable. We'll be back soon." Other users have reported getting the same message, perhaps because the clipboard contains way too much text. I suppose I could have chopped that long Problem Details report into pieces and passed its information along that way, but I'm not sure that the Problem Details report gives quite the same analytical information as a Crash Report. Besides, from what I could glean, the myriad of well-meaning solutions that were offered seldom, if ever, appeared to cure the problems users were reporting.
Instead, I took a cue from a guy who reported in another thread on Apple Discussions that he cured Safari from hanging by disabling Java and JavaScript in Safari's preferences. That seemed efficient and reasonable, so I implemented his solution.
It seemed to work at first, but a short time after disabling Java and JavaScript, the Mac froze up. I could not access any open applications, nor could I force quit anything. My only choice was to press the power on button for over five seconds to force the computer to shut down. Exhausted from trouble-shooting, we both took a long nap after that. (Recommended trouble-shooting step.)
Upon refresh and restart, I launched Safari. It was now able to access the page in CareerBuilder.com which was causing the hang. However, because JavaScript was now disabled, I could no longer see the rollover button function on my own portfolio website, nor could I see who had visited my website at StatCounter.com, a web analytic service I use to monitor web traffic.
I wanted those abilities back.
So, with tabs open to both the offending CareerBuilder.com page and to StatCounter.com, I re-enabled JavaScript. When I refreshed the StatCounter.com page, the previously unavailable data updated fine. When I refreshed the Career-Builder.com page, all 96 of 96 items updated fine: most importantly, the page did not cause Safari to stall, as it had consistently been doing before.
I switched back to the StatCounter.com page, I enabled Java, and I refreshed that page. No issues to complain about there. I moved back to the problematic CareerBuilder.com page, and I refreshed that page. Safari re-loaded all 96 items again—this time pausing momentarily to report "1 error"—without hanging up.
I cannot know for sure, but perhaps the Java programming "error" contained on that CareerBuilder.com page was the trigger for causing Safari to hang up. Perhaps there was nothing wrong with my Safari configuration after all. This explanation is plausible, because the only hangs Safari has experienced over the past couple of days have occurred on two different CareerBuilder.com pages.
Thirty minutes later, refreshing that same problematic CareerBuilder.com page resulted in only 80 of 81 items being completed, as a new bunch of advertising messages cluttered up the page. Perhaps that one item which failed to load is related to that "error," which continues to be reported. However, at least the page is no longer stalling Safari.
In any event, these were the steps that "cured" the problem of Safari hanging:
1) In Safari preferences, disable Java and Java Script.
2) Shut down the computer.
3) Take a long nap while the computer is powered OFF.
4) Restart the computer and relaunch Safari.
5) Optional: Enable Java Script, then Java, if certain sites require them to be enabled for full functionality.
6) Optional: Visit pages that had caused Safari to hang, and see if Safari functions fully on those pages.
I have no technical understanding of what may have caused Safari to hang in the first place, or if switching Java and Java Script off and then back on, is the true solution to the problem. Maybe letting the computer take a long, overdue nap did the trick! I had been placing it in Sleep mode for several days, so it's missed a good shut down and re-boot routine.
But I am pragmatic about success, so I am merely reporting what worked for me and what I did. Your mileage may vary.
I will monitor the situation and report any future Safari hangs should they occur, since that might be an indication that the problem was not related to Java or Java Script at all.
bowlerboy_jmb

Hi,
You could also try resetting your airport express.
http://docs.info.apple.com/article.html?artnum=107418
Worked for me.

Possible solution for white C2D iMacs with screen artifacts or lines

I have a white 20" Core 2 Duo iMac with the famous screen artifacts issues. Screen tearing, horizontal lines, goofy pixels, you name it. From my research it seems there are countless others with these problems.
I tried running the SMC fan control app to boost fan speeds. This helped a little, but did not completely solve the issue. A lot of people think these issues are related to heat, and I agree, but only partially. When a graphics chip overheats it is eventually damaged. I have damaged my share of graphics chips while overclocking them in my PCs. In the case of my iMac and maybe plenty of others, I still have issues if the GPU is hot or cold.
I installed WinXP using bootcamp. I finally found an application which will change the clock speed of the GPU on the fly. The X1600 GPU in my iMac has a 475Mhz core speed and 500Mhz memory speed. I cut these down to 400Mhz on the core and 400Mhz on the memory. At these lower speeds I no longer have any issues with screen tearing, horizontal lines, or random crashing. I do still have a few wierd pixels here and there, but they are not all that noticeable and I can live with them.
Now for the fun part. I wanted to permanently fix these speeds into my GPU so when I boot back to Mac OS X, I don't have any issues, and I no longer have to boost fan speeds or run any additional apps. I spent most of today taking apart my iMac, putting DOS on a spare SATA hard drive, and running an external monitor while booting my iMac with the spare drive hanging out the side. All this so I can run ATIflash, and use it to dump an image of the GPU BIOS ROM file.
Well, I ended up finding out the ATI GPU has no ROM to flash. My best guess is open firmware or something like that passes this data on to the GPU when the system boots.
So, in my case slowing the GPU down significantly reduced my problems while running within windows. I am 100% confident slowing the GPU down will also improve issues within Mac OS X, but I have no way to pull this off.
If Apple reads this, or if anyone has any connections at Apple, can we please get an optional firmware update to reduce the speeds of the X1600 GPU? It won't fix all the iMacs with these issues, but it will fix quite a few, and for those out there who don't have any issues at all with their white C2D iMacs, lowering the GPU speeds will most likely prevent damage from inevitably occurring, keeping them a happy customer.
Now, some of you may not like the idea of a slower GPU, but if I have to pick between a slower GPU and an $800 logic board, I will take the slower GPU any day.

There is a little easier Way to Navigate in Doing an F.D.R. than that Method: I listed it here if you prefer going this Route..
2. Re: FACTORY RESET FOR RAZR AN RAZR MAXX

A possible solution for the folder exclamation or folder! problem

This worked for Windows XP. Don't know if it will work for the Mac but it may.
Three days ago my wife’s iPod, 4th gen 40gb, stopped working. I got the folder exclamation icon (or folder! as some have described it). I hooked it to my laptop and had no joy with it. The system (XP) would see it sometimes as a removable and sometimes as a hard drive. Disk Manager saw it a couple of times but it always took about an hour for it to show up. I messed with it about 5 hours the first night and then decided to take it to the Apple Store the next day. The guys at the Genius Bar had the same problem, this time on a Mac. Told me it was out of warranty and that the best I could do was find someone who could repair it. I’m a tech and I don’t want to mess with it but I’m not going to pay someone $200+ to replace what is essentially a laptop hard drive. So I kept plugging away and researching on the net. I’ve seen a lot of posts concerning the icon as well as a few concerning the partitioning of the drive. I’ve even seen where some people are advocating opening the iPod and shaking the drive which is never a good idea. Nothing really seemed to help so I kept working on it myself.
I did find a solution and it takes a bit of time. It involves deleting the current partition and formatting it again. Since I’m using this on XP I had to format the partition as a Fat32. In order to do this I had to use the Knoppix operating system because Microsoft limited XP’s ability to format Fat32 partitions to 32GB. If you have an iPod that is less than 32gb you may be able to just format it using XP. I also couldn’t get XP to delete the partition so using Knoppix worked out very well since it has a program called QTParted on it that works like Partition Magic. Knoppix is free and does not have to be installed. It runs entirely off of your CDRom drive. If you have about an hour to try this I’d be interested in whether it works for anyone else.
I believe the problem that most people are having comes from the fact that the Fat32 file system is not good for keeping a “clean” hard drive. It tends to leave bits and pieces around and if you update a lot it can affect the hard drive’s performance. I know that Restoring using the updater is supposed to fix this but it appears that the updater software does a quick format. That won’t always fix the problem. By following what I did you will blow away the existing partition and create a new one and format it to the Fat32. This effectively makes it a “clean” hard drive.
Before I walk you through this I just wanted to say that I’ve purposely blown my wife’s iPod away 4 times to make sure that this works. Works like new now and did so after each time I blew it away. You should have seen her face when I did it.
The things you will need and need to do are:
CD Burner (you need to be able to create a disk from an ISO Image
Blank CD
Download a copy of Knoppix 4.0 from http://www.knoppix.com
Download the current version of iPod updater http://www.apple.com/iPod/download/
Make sure your system can boot from CD-Rom (Check your system docs)
About an hour of your time
1. Using your software of choice, burn the Knoppix image to your CD.
2. Place your iPod in Disk Mode. You do that by resetting the iPod and , on 4th gen at least, once it resets immediately hold down the Select+Play/Pause buttons. You should see it say Disk Mode at the top of your screen. Not sure how to do that on other iPods but I figure if you’ve gotten this far you will be able to figure it out.
2. Shut your system down and place the Knoppix cd in your cdrom. Make sure your system will boot from CD
Note: If you are using a laptop you may not be able to use the mouse by default with Knoppix. You can try to enable it when you first start Knoppix. You do this by typing the following at the Boot: prompt.
Knoppix pci=irqmask=0x0e98
If that doesn’t work for you then you may need to hook another mouse to your laptop.
3. Once Knoppix is up go to the K button (located like the start button on XP) and go to the system group. You will see a program called QTParted. Start that program.
4. On the left of the QTParted screen you will see the hard drives on your system. One of them should be your iPod. It should say something like /dev/sda1. Click on that device. In the bottom on the left side for Drive Info I was given the information that it was an Apple iPod and the capacity. Don’t know if everyone will get that but it stands to reason that you should.
5. You should now see the iPod’s partition information on the right side of the screen. I don’t know about anyone else’s but my wife’s had 37mb free and that turned out to be important. Make a note of any unallocated space you may have and keep it for the next step. Highlight the partition and then delete it. Once deleted you will need to go to the upper left corner of the screen. There is a button there to Commit changes that you have made. Click on this button and wait for the process to end.
6. Now to create a new partition. In the right panel right click again on the drive. Select create partition. It will ask you what type of partition you want to create. Select Fat32 and where it gives you the option for the partition size, use the slide bar to leave the amount of space free that was unallocated in step 5. The reason for this is that when I first partitioned my wife’s I used all of the available space and the iPod didn’t like it. Once you have the size set hit OK (or whatever it is to continue). Go again to the upper right and hit the Commit button. Wait for the changes to happen and then shutdown your system, remove the Knoppix cd and then boot again as normal.
7. Once your system has rebooted start the iPod updater. Once it asks you to plug in your iPod connect your iPod and you should be able to Restore it.
As I said I did this 4 times to make sure it worked and each time both the updater and iTunes saw the iPod with no problems.
At this point you should have your iPod back up and running. I apologize if I haven’t been very detailed here but I’m at work and typing this from memory. I wanted to get this out now while I’m thinking about it because I’m getting ready to go away for a couple of months and won’t have time to do this at home.
Let me know if this works for anyone.
Windows XP Pro
Windows XP Pro

mythic: You do NOT have to use FAT32. You don't even have to delete and recreate the partition. All you have to do is format the hard drive of the iPod. That's it. Your procedure will work even if you format the new partition as NTFS.
But don't take my word for it. Try it yourself.
I've done this exact same thing a hundred times, and I never used Knoppix to do it. All you have to do is:
1. Force the iPod into Disk Mode as described here: http://docs.info.apple.com/article.html?artnum=93651 (note that there's a different procedure for 3G and older iPod's!)
2. Start the iPod Updater (on an XP box). Having the Updater open will prevent iTunes from auto-launching and trying to screw around with the iPod.
3. Connect the iPod. It'll show up as a normal drive letter on the PC (if the PC crashes at this point, that's a Windows specific problem, not an iPod one).
4. Use the Disk Management tool (located in Control Panel->Admin Tools->System Management) to format. Doing this as NTFS is perfectly fine. Do not do a quick format.
5. After the format, go back to the updater and hit Restore.
It works every time. I've posted this like a thousand times, but nobody ever seems to pay attention.
Why does it work? It's simple, really. The Updater's Restore process is broken if there are bad sectors in certain locations. Formatting the iPod's partition like that causes it to do a scan for bad sectors. That's why the format takes so long (quick format skips this scan). The reason NTFS works fine is because one of the things the restore process actually does is to rewrite the iPod's partition table, and in the process it converts that NTFS space back into a FAT32 space. So really it makes no difference what that partition is, Restore will overwrite it anyway.
For information's sake, what the Restore process actually does is to write a disk image onto the iPod's drive. This disk image itself is tricky, but the Restore procedure is not particularly complex. You can even extract that image and write it to the iPod yourself in Linux using dd. That works just as well.
Anyway, when the drive won't write to a specific sector, then the Restore program freaks out. Formatting will remap the unwritable sectors and fix the problem. It's the bad sector remapping that's important here, not the partition layout or the filesystem type. Fix the drive problem and the Restore will work.

Possible solution for "iPhone not recognized by iTunes" issue (Vista/7)

This solution is intended for those Vista/Windows 7 users:
- whose iPhone will not show up as a device in iTunes (usually after upgrading to iTunes 10);
- whose iPhone is successfully connected to the PC (appears as a device in Windows Explorer);
- particularly those experiencing the issue where fully uninstalling/reinstalling iTunes will allow it to recognize the iPhone once -- and once only -- but disconnecting the iPhone will cause iTunes to ignore it again (until the next full uninstall/reinstall).
I know there are plenty of people who fit those criteria, as I've been monitoring the forums for a fix for this for weeks.
The solution's pretty straight forward:
1. Disconnect all iPhone/iPod devices and close iTunes
2. Open Windows Explorer
3. Navigate to the folder: *C:\ProgramData\Apple Computer\iTunes*
4. Delete the file: iPodDevices.xml +(I recommend you copy it to the Desktop first, for peace of mind)+
5. Reconnect your iPhone to the PC and fire up iTunes
Fingers crossed, your iPhone should now show up as a device in iTunes after a short pause.
The XML file is recreated each time the iPhone is connected to the PC, so you will need to repeat the file deletion each time you want to sync your phone. So this isn't a permanent fix -- that's up to Apple to fix their buggy application -- only a workaround, but it's a **** sight faster than uninstalling every piece of iTunes-related software each time. (You could even set up a batch file to delete iPodDevices.xml automatically and save the folder navigation.)
Windows XP users: unfortunately, the ProgramData folder only exists in Windows Vista/7. I don't have a copy of XP to hand to locate it myself, but it's a good bet that the same iPodDevices.xml file exists somewhere on your PC (most likely somewhere under Program Files or Local Settings) and is the culprit if you're experiencing the same problems under XP.
So far, deleting that file before connecting my phone hasn't failed to work for me (iPhone 3GS, iOS4.1, iTunes 10.0.1.22). YMMV, but go ahead and reply if it works for you too -- it'll help me get a more detailed and coherent bug report to Apple.

I should also mention: this solution should not be a first step in troubleshooting.
If you haven't already, try the following steps first -- they're more basic and/or more likely to provide a permanent fix for you:
1) Try a different USB port. (One on the PC itself; not on a USB hub.)
2) Try a different USB cable.
3) Reboot the PC. (Sure you've already tried this, but still...)
4) Fully uninstall & reinstall iTunes and related software: http://support.apple.com/kb/HT1923
5) Restart the Apple Mobile Device Service : http://support.apple.com/kb/TS1567
6) Reinstall/update the Apple Mobile Device Driver: http://support.apple.com/kb/ts1538
Reinstalling iTunes fully (4) works for many people so be sure to try that, following the sequence on the instruction page. If you're seeing the issue where reinstallation will allow you a one-time sync before iTunes screws up again, I'm pretty confident that following the solution in the first post will work for you.
PS: Mac users... sorry, I know some of you are seeing the same issue but I don't have the first clue about how iTunes is structured on a Mac. Best case, iPodDevices.xml exists somewhere on your Mac and you can try the same fix... good luck!

Invalid ELF Heder [possible solution, for the unlucky]

well i duno whre to post this, but whatevr..
[woffle]
yesterday i found that for whatever reason a lot of apps stop working ,
and instead started complaining about libc.so..6 having an invalid ELF Header... [?] i dunno, that was before and after the upgrade to the 2.5 version...
anyay, i googled it and found a few random users with this problem, so i knew it had nothign to do with anything.. prolly just the unlucky ones lol..
[possible solution]
anways... i managed to fix it [i think] by linking /usr/lib/libc.so.6 to /lib/libc.so.*2.5 instead of /usr/lib/libc.so
[add]
/usr/lib/libc.so is an ld-script btw. duno if it should be that way..
i'd file a bug report, but as i said.. it just happened out of teh blue, i did no sys up/down-grades , compiles, nothing... apart form install kdebase to get kate...

Hi Florin,
Check person type useage also. coz When Employee.Ex-Applicant' person type changes to 'Employee.Applicant', no other actions can be processed for that person.
Kind Regards,

Here's a possible solution for those w/Ellipsis 7 memory problems

Similar Messages

Maybe you are looking for