Here's How I Finally Got Muse CC to install on my Windows 7 Pro 64bit machine! Weeee!

Hey all! Good news!
Just had to share how I finally broke through to the other side with a mixture of suggestions from the adobe community.
1. I deleted my previous Adobe AIR version in C:/Programs (x86)/Common Files/Adobe AIR files (just pitched version 1.0 file in the trash and emptied it).
2. I went to Task Manager, then clicked Services tab, then clicked on the Services... button, then made sure Windows Installer service was set to Auto and Enabled (we should all be so enabled).
3. downloaded, and ran Windows Fixit, found Adobe AIR on the list (God help you if it's not on the list) and told it to go take care of my Uninstall/ install problems. It found a registry problem and an instal problem and fixed them (good boy Fixit ap!)
4. While Fixit Waited, it asked me to tell it how the install went (such a caring little app) I ran the Adobe AIR Installer as an administrator.
5. It finally installed, yipee!!!
6. I finally Installed Muse CC via my Creative Cloud Apps manager. Yipee again!!!
7. I gave windows Fixit an attaboy and sent it on its way back to Microsoft with a heartfelt thank you.
And Viola! Half a year of struggles came to an end!!!
Hope this helps you poor folks who have gone through the same thing. I know how frustrating it is to not be able to use an app you are paying for.
Happy Thanksgiving, truly!
David G

1. Hotsync can send documents to the phone SD card. Or if you use docs to go it can send that though its program.
2. Phone as a modem is possible to do but base on if your carrier will allow you to do it on the plan you are on. Here is a link on how to do that: http://kb.palm.com/wps/portal/kb/na/treo/755p/sprint/solutions/article/44803_en.html
3. If you have an SD card port on your computer you can transfer files this way as well.

Similar Messages

How to install Oracle7 on Windows 2000 Pro??

Hello all,
I got the following message when install Oracle7 on Windows 2000 Pro.
"oback.vrf(379) OS_ERROR while getting service status portmap"
How to solve it?? Thank you.

Oracle7 ???!!
Really you need that (so old) version ? Reason ?
Anyway, see if Re: Oracle 7 on a Pentium 4 may be of some help.

On how many computers am I allowed to install a copy of Acrobat Pro?

On how many computers an I allowed to install a copy of Acrobat Pro?

According to the End User License Agreement (EULA) law, it is recommended to install the Adobe Software on only two computers and that is mentioned on the End User License Agreement when installing the Software provided the Software is not used simultaneously.
However, you can install the Software on the third Computer by de-activating the Software from one of the older one and then install it on the new one so that you can avoid any error message while activating the Software.

Finally got Photoshop Elements 11 installed

I recently purchased PSE11 and just like everyone else in this forum I had massive problems trying to install this programme with the 'Shared Technologies' error. I spent three days reading everyone's suggestions and trying everything that was suggested. Nothing worked. I have three other computers at home one is XP Home Edition, one is Vista Ultimate and I also have an IMac. The computer that I really wanted this programme to work on is Windows 7 32bit as this computer does have a faster processor and other stuff. I am not an advanced computer user and am barely an Intermediate level so the description of my computers is just the basic info that I know.
After 2 days of trying to install this on Windows 7 I decided to try and install it on the other three computers. This programme (the trial version only) installed on all three other computers with no issues whatsoever. It all installed within 5 minutes. I figured that I would most likely have to use the computer with Vista Ultimate OS so that I could use this programme.
I decided to give it one more shot so looked at some other forums and found this:
1 posts
14/01/2013
Currently Being Moderated
9. got it working,
14/01/2013 7:54 AM in reply to ShefaliG
Report
Using Windows 7 64bit
I had the same problem but I was able to fix it by renaming a folder and reinstalling
Location: program files(x86)/ common files/ adobe/ locate the folder OOBE and rename it to OOBEold
Reinstall Photoshop Element 11 or Premiere Element 11, I had the same problem with both
I hope it works for you guys, it worked for me
>>>>>>>>>>>>>>>
So I tried the above suggestion and also looked into the program files and program data for Adobe in the C drive. I deleted everything in the Adobe files and data that related to PSE11 and anything else that I thought might need to go. Restarted my computer and this programme has now sucessfully installed on my Windows 7 computer with no issues whatsoever.
I have no idea whether it was the 'OOBE' thing or deleting Adobe files and data in the C drive or if it was a combination of both things. I opened up the trial version programme I had just installed, entered my serial number and thankfully everything now works with no problems..
I hope this helps someone..

Brooks lansing if you create a new Administrator account does the same issue occur? If so then it is likely that there is a file permission failure and file permissions have been set for the existing Users instead of the groups they belong to.
Have you removed and reinstalled Photoshop Elements 11? This may reset the file permissions to the correct state to allow it to work under new accounts.

How to install Windows 7 Pro 64bit from a Retail DVD

Good afternoon
I have got a Lenovo X201 which unfortunately cannot locate a recovery disc
I mtherefore purchased a retail version of Win7 Pro 64 bit and put into my external DVD player to install
I changed the boot option to look at the wxternal dvd and it start to work but when i get to aprox the screen saying copying files the computer shuts off
Do you know how i can get round this issue of installing Windows 7 Pro 64 Bit
I even tried downloading the Lenovo Windows 7 Pro 64 bit iso and the same result
Many thanks

The X201 does not have UEFI bios.
ThinkPad W540 (20BG) - i7-4800MQ/24GB // ThinkPad T440s (20AQ) - i7-4600U/12GB
ThinkPad T440p (20AW) - i7-4800MQ/16GB // ThinkPad Helix (3698-6EU) - i5-3337U/4GB
ThinkPad W520 (4282-W4Q) - i7-2720QM/32GB // ThinkPad T400 (2767-W1C) - P9500/8GB
ThinkPad T61 (7665-CTO) - T7700/4GB // ThinkPad T60p (8741-C2G) - T7400/4GB

How to install clusterware on windows 2008 R2 64bit

Hello all,
As you know at otn there is only 10.2.0.4 clusterware setup for windows2008.
I want to install oracle clusterware on 2008R2. I know that there is a patchset 10.2.0.5 for windows 2008R2.
But before using it I must have alredy binary setup for oracle. (I assume)
So when I trying to setup clusterware on 2008R2 I got error
OUI-35073: Exception occured while starting service in the remote nodes. Could not start the service 'OracleClusterVolumeService' in the remote cluster
So I want to know , Is there any way to apply patch to setup files ? So I can install clusterware.
Or how can I install clusterware on 2008R2

Hi,
Do not install Oracle Database/Clusterware 10g Release 2 on Windows Server 2008, Server 2008 R2, 7 or Vista using the 10.2.0.1 version. You must use the 10.2.0.4 (64-bit) x64 version specifically created for these operating systems. After installation, for Windows 7 and Windows Server 2008 R2, patchset 10.2.0.5 or higher must be applied.
Regards,
Levi Pereira

Got my 160 Classic to cooperate with Windows XP Pro SP2

I came across this by accident, unfortunately it will not work for all. Had all the issues with computer freezing, iPod corruption, Windows Explorer freezing, etc. One time I shut down my computer with the iPod connected, the message came up asking if I wanted to terminate res.exe, once I selected "End now" iTunes, which was automatically started when I plugged in the iPod, but never displayed,suddenly came to life and the iPod was correctly recognized. Continued to do my music transfer without any issues. To confirm that res.exe was, in fact, the culprit for all my iTunes/iPod issues, I shutdown completely, disconnected the iPod and then booted up. Once the system was fully loaded, I terminated the process "res.exe" using Task Manager and then connected the iPod. Voila! No more problems. Hope this helps some of you. res.exe is NOT a core Windows file but is installed for an application for USB connectivity, not sure which one. Feedback would be appreciated.

Got the error message 3256 after downloaded latest itunes version 8.xx.
After days of reading logs and bullentin boards, uninstalling, hard resets,firewalls experiments, etc, I found solution for me. Following firmware upgrade to airport express solved. When you go to Apple download center and search for airport revisions only the MAc version pops up. However they do have this one for windows. Give it a try. Good luck.
http://www.apple.com/downloads/macosx/apple/firmware_hardware/airportexpressfirm wareupdate63forwindows.html

How do I set up a localhost for Dreamweaver in Windows 7 Pro?

I would like to use subversion on a localhost with dreamweaver. I used svnadmin at the command line to set up D:\localhost. When I inspect it using Window explorer , it was created.
In Dreamweave cs6 Diyrrd//ManageSites/ I double click on billykbaker then click the version Control tab. amd emter
Access" Sibversopm
Protocol: HTTP
Server Address:/repos/billykbaker.com
Server Port: 80
UserName: AnnMaybury-- my admin name
Password: my admin password.
When I try test, I get an error:
Server and project are not acessible (175002)
Please help.
Ann Maybury [email protected]

Hi Ann,
VisualSVN Server does not require you to install any additional applications I mean that you don't need to install WAMP unless you use it for website testing, that's up to you.
Installing VisualSVN Server and setting Dreamweaver to access it's repositories is actually a task of a couple of clicks. However you need to check wheter you use correct URLs and/or created a user account with access to the repository.
* What is the exact URL you enter in Adobe Dreamweaver? You can use the Copy URL context menu command in the VisualSVN Server management console to get the correct URL of your repository(ies).
* Make sure you created a SVN user account and use the correct password.
Basically I advise you to double-check the Getting Started guide at http://www.visualsvn.com/server/getting-started/
NOTE: Subversion repositories can be contacted locally via 'file://' protocol. I don't remember whether Adobe Dreamweaver supports this access method, though. However it definitely should. If you are the only developer who is going to work with Subversion repsitories you can set Dreamweaver to access a repository using such URI: file:///D:\repository (make sure you use correct path to a repository). However with such method you don't have any authorization and you can't allow remote users to access the repository.

How to revert back to windows 7 home premium 64bit from windows 7 pro 64bit. Window 7 home premium came preinstalled on my dell inspiron N4110

Please assist me; I need to revert back to windows 7 home premium service pack 1 running a 64 bit system from windows 7 pro service pack 1 running a 64 bit system. Windows 7 home premium came preinstalled on my dell Inspiron N4110. I added
4GB of DDR3 1333MHZ speed memory. My processor is a Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz 2.20GHz.
FYI the windows 7 pro disk and key don't match and pro expires in a few days.
Thanks for your assistance

Hi clinvestigations,
I recommend posting your question in the
Windows 7 forums. The forum where you posted this is focused on discussing general software architecture.
Esther Fan | Visual Studio | If a post answers your question, please mark it as the answer. Thanks!

Finally got my Globe Trotter Connect Rocket Stick to work Snow Leopard

On Sept 29th at 10:00 pm I wrote this email to Rogers.
Please pass on this very important information. The Rogers download for icon 322 from your site for Globe Trotter Connect does not work with Snow Leopard. Snow Leopard is 10.6 version . Recommend download for Snow Leopard by Rogers is 10.4, icon 322. Which is for Leopard and Tiger so this is the wrong download for Snow Leopard. Believe me when i tell you that i have devoted 10 hours to figuring out what the problem is. I have worked with Technical Support at Rogers, Apple Care Specialist and Options Tech Department. Here is how I finally fixed the problem. Please share this information with your Tech Support Department. Customers calling in with the same problem. They should go to the ATT website. ATT has the version 10.6 which is the right download for Snow Leopard and it listed in red on the left hand side of their site. Once customer has removed the wrong application for Globe Trotter then downloaded the 10.6 version for Snow Leopard (off the ATT website) then instruct your customers to go to Globe Trotter Preferences. Under roaming then enter the following: Under 3G/EDGE/GPRS change to read APN: internet.com. username: wapuser1 Password:wap. IMPORTANT do not press reset, or it will not work. Just ask customer to close that window. Now the Globetrotter will initialize and ask to connect. After a few seconds internet will now work on Rogers Network. Hope you use this information and hopefully Rogers will install the link that ATT has onto their site and save everyone a lot of valuable time.
Regards,
Colleen Williamson

Here is the right link. look on the left hand side in it will read New (in red) GT connect for 10.4 10.5 10.6- (10.6- is the right version for Snow Leopard)
http://support.option.com/att/i
Then simply go to Globe Trotter/ Preferences. then change the settings to Rogers. ie type in under APN: Internet.com etc.
Gt2go. good luck.

How do I install lion on a macbook pro that has a MBR instead of GUID.

Not sure how that happened. Maybe when I installed parallels and Windows XP, but Lion apparently requires a GUID partition. I've backed up and copied all important files to an external drive. If I reformat the drive for GUID how do I restore Leopard so I can then upgrade to Lion. I lost me original disks. Can I make a boot disk from the current OS?

As you know you must install OS X on a GUID partitioned, Mac OS Extended, Journaled drive. You do not need to reinstall Snow Leopard in order to install Lion if you have a copy of the Lion installer. If you don't have a copy of the installer then I suggest you re-download Lion but save the installer on your external drive. Here's how you do that:
Download Lion Again Without Installing Snow Leopard First
There's an easy method to force a download within the Mac App Store without any tinkering. It seems to be the official method, although I found no description of this in any of Apple's documentation.
So here's how to do it:
Open the Mac App Store.
Navigate to your Purchased page.
Hold down the Option key on your keyboard and click on your 'OS X Lion' purchase link (not on the 'installed' button).
You see the Lion product page. It should say 'Installed,' but that button is clickable. Hold down the Option key again and click on 'Installed.' If you don't hold the option key it will tell you there's already a newer version installed.
Enter your login credentials.
Download.
It's important to hold down the Option key twice. Once on the Purchased page, once on the Lion page. You also can't navigate to Lion directly, you need to open it from the purchases page. But if you follow this procedure you should find the Lion Installer within your Applications folder.
Now, make yourself a bootable DVD or USB flash drive for installing Lion:
Make Your Own Lion Installer
1. After downloading Lion you must first save the Install Mac OS X Lion application. After Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing Lion.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to several hours depending upon the drive size.
3. Locate the saved Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the InstallESD.dmg disc image to the flash drive as follows:
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the InstallESD.dmg disc image file into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable Lion installer that you can use without having to re-download Lion.

I had final cut express 4 already installed on my new macbook but can't open it because it is asking for my serial number which is on the disc. I've put it in with and without dashes and dots and it won't accept it. What do I do?

I had final cut express 4 already installed on my new macbook pro at the shop but I'm trying to open it up and it wants my serial number. I've typed in the number on the disc labelled 'product serial number' but it won't accept it. The number has lots of dots and dashes in it and I've tried typing these as well, but to no avail. What can I do?

You do need the dashes.
Also double check that O & 0, I & 1 are not being confused.
The serial no. pretty much follows a three numbers then three letters approach.
Al

I have a new laptop so I download again iTunes...the problem here is that I just got a cd and I tried to put it on my iPod and it won't let me, how can I fix this?

I have a new laptop so I download again iTunes...the problem here is that I just got a cd and I tried to put it on my iPod and it won't let me, how can I fix this?

The iPod sees the new computer as a new iTunes library. You can only sync with one iTunes library. However, you can manage music among disfferent computers. See:
Using iPhone, iPad, or iPod with multiple computers

Finally got a recovery CD but how to use it?

Hello, after months of trying i finally got my self a product recovery CD
https://backupmedia.toshiba.eu/landing.aspx
I hope this was the right place to get one, as it was the only one i could find. Anyway i as far as i know i have keep pressing f10 when i turn the laptop on, im sure i pressed f10 before. However when i press F10 now i get something completely different.
Edit windows options for: boot micosoft windows vista
path: windows/system/windows.exe
partition 2
hard disk: 48623b6e
[ /NOEXECUTE =option
This is what i get, so how do i use the CD and wipe my hard drive like i have before?

Ok i acually got a hold of there email address and i said it had no data on it. They hadn't even so much sent me a reply since then, until now. I got an Toshiba Shop order confirmation email. On it says;
Thank you very much for placing an order at the Toshiba Europe Backup Media Online Shop powered by arvato digital services.
We have received your order and it is currently being examined and processed.
As soon as your order is dispatched, you will receive confirmation via e-mail which you can then use to view the delivery status of
your order online.
It says the Reference ID is 2010033376-R where as before it was just 2010033376. Under items ordered it says that that i have ordered a recovery CD but the cost is 0.00 GBP. It also says that the order date was the 13.8.2009 which is today.
My point is, is this there reponse? why haven't they asked me to send it back or sent me an email with instructions? because so far they have completely blanked me and i have no idea what to do. Do i send them a letter? do i just send the thing back to them without any instructions?
*EDIT* LOL i looked in my junk emails and found an email from them there, they sent me a free copy WOOT its all coming up good :D
Message was edited by: whitescar911

How do you use passbook? Finally got the app to connect to App Store. Does not seem to allow me to add anything.

How do you use passbook? Finally got the app to connect to App Store. Does not seem to allow me to add anything.

http://support.apple.com/kb/HT5483
Use this

Here's How I Finally Got Muse CC to install on my Windows 7 Pro 64bit machine! Weeee!

Similar Messages

Maybe you are looking for