Here's how I restored my mini from the dead (Win XP)

When I installed the 1.4 updater on my iPod, it erased everything on it. Here's what I did to fix it:
1) Uninstall the 1.4 software
2) Disconnect the iPod from the computer, but do so safely, even if you have to reboot the computer.
3) Reset your iPod. There are specific instructions on how to do this here(http://docs.info.apple.com/article.html?artnum=61705). You may have to do this several times throughout the following process. You can only perform a reset when your iPod is disconnected from your computer or other power source.
4) Install the original software from the CD that came with your iPod. Follow the instructions to the letter. The software will format your iPod, but may come up with an error box explaining that it cannot complete the format. Click "OK" on the error box, then try the installation again. It should now say that the iPod has been formatted. Allow the installation to complete, then reboot. Leave your iPod connected to your computer during the reboot.
5) When you are rebooted, hit "CTRLALTDEL" to bring up the task manager. Under the processes tab, end the processes "iTouch", "iPodServices" and "iTuneshelper". These are programs that prevent the updater from "locking" the iPod.
6) Use the updater to restore your iPod to its factory settings. You may see several different error messages, including "Firmware update failure. Disk write error.", an error message telling you that the software you're trying to apply isn't the correct version for your iPod, and the "Can't lock iPod" one. Keep trying. You may need to reboot to safely disconnect your iPod from your computer in order to reset it. My advice is to perform this reset according to the directions, and to do it several times.
7) Once your iPod is restored, reboot to disconnect it safely. The iTunes software will not recognize it immediately because you have yet to set your language preference on your iPod. Reconnect it after you are rebooted and have started iTunes. There you will be able to restore your music.
It took me a long time, a lot of frustration, and pure dumb luck to get my iPod working again. I'm no genius. I just hope that these steps might help someone else in the same predicament.
Thanks.

"You can only perform a reset when your iPod is disconnected from your computer or other power source."
Just one small point. That statement you made is incorrect. In fact in the instructions on how to reset your iPod clearly state that if you are having difficulty resetting you should connect to power, either the a/c charger or your computer.

Similar Messages

  • How to restore one table from the previous backup in 9.2.0.8 version.

    Hi,
    How to restore one table from the previous backup in 9.2.0.8 version.
    Thanks
    -Ganga

    Hi,
    What is the table you want to restore?
    Using export/import is supported with Oracle Apps database (for full database exp/imp, and certain schemas like custom ones). For the Apps schema, I believe it is not supported due to object dependencies and integrity constraints.
    Regards,
    Hussein

  • HT1491 \how to restore app purchased from the ipod

    how to restore purchased app from the ipod

    Not sure what you are asking?
    Where is the app now?
    Where do you want it to be?
    Please explain

  • How to restore my data from the blackberry protect back up archive

    Hi, my phone recently crashed, so I reloaded my OS & tried restoring my data from the blackberry protect app but noticed I could only restore from my last backup. I'd like to restore from another backup point in my archive & not my last. How do I go about it?

    Only backups which are displayed can be restored to your phone. If you don't see any older ones, something might have gone wrong with the backups being loaded to the site. Perhaps you have an older backup done with BlackBerry Desktop Software which you could reload?
    Cheers.  
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • How to restore a song from the "Project File Backups"

    Help! I recorded onto an external harddrive, then copied all the project folders to a different drive. Now, I can't find the project files, but I can find the "Project File Backups" in the Project Folders. I suspect the original project files were saved separately from these folders on the original hard drive, but that is long gone, so I am hoping some one can tell me how to recreate the project from the files in the "Project File Backups" folder.
    ANOTHER CLUE: Stranger still, I can't find any of my logic song files using FILE>OPEN, SPOTLIGHT, nor FINDER- Only those that still populate the "open recent" list.
    Any ideas? Thanks friends!

    Hi there
    Your Project File Backups are simply the previous Project files you've saved. These files are essentially the strip settings, layouts, midi, and pointers to the audio files of your Project.
    If you have trashed the audio files then your are outta luck. This is why you should Consolidate (File-->Project-->Consolidate) all of your projects into one Project Folder on your HD. That way all of your Audio files as well as your sample files and UltraBeat files remain consolidated within a Project Folder. You can then Copy that entire Project folder to another location and have all of the respective files for that Project.
    Sorry for your loss.
    Regards,
    bb

  • TS1702 How to restore my applications from the App Store after changing my country?

    I had changed my country inside my Apple ID and I couldn't retrieve my purchased applications after that
    Anyone have solution for such a case

    So I guess it will only be new apps that I download that are allowed to give me their updates while 13 updates wait for me on an ID I can no longer access.
    Yes...  sorry.
    In the future, if need be, you can re download your purchases for free  >  Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Good rule of thumb is to back up your purchases regardless  >  Mac App Store: Backing up your app purchases

  • HT201272 Having a bad day my iTunes library got corrupted and my back up disk has failed how can I restore my purchases from the iTunes store

    Having a bad day my iTunes library got corrupted and my back up disk has failed how can I restore my purchases from the iTunes store? When I try it tells me the pruchases have already been downloaded to this computer.

    Does your purchased rmusic appears under the Purchased link under Quicklinks on the right-hand side of the iTunes store home page (music can't be re-downloaded in all countries) ? If they do and you don't have the cloud symbol against them so as to re-download them, then do you still have the entries for them in your library i.e. where you would normally click on them to play them ? If you do then try deleting them from there (iTunes will be seeing them and assuming that you still have them somewhere) and they should then get the cloud symbol for re-downloading in the Purchased link.
    If you aren't in a country where music can be re-downloaded then you could try contacting iTunes support and see if they will grant you a re-download : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page,

  • I just got a new computer, restored my music from the old computer...how do i get my transferred music into itunes?

    i just got a new computer, restored my music from the old computer...how do i get my transferred music into itunes?

    Hi,
    See this link.
    http://support.apple.com/kb/ht1449
    Jim

  • HT1766 Hi I am trying to restore my iphone from the itunes back up and it is asking me for a password, I don't ever remember putting a password in. how do i get the password reset?

    Hi I am trying to restore my iphone from the itunes back and  it is asking me for a password, I don't ever remember putting a password in. how do i get the password reset?

    Marrtin S wrote:
    Hi I am trying to restore my iphone from the itunes back and  it is asking me for a password, I don't ever remember putting a password in. how do i get the password reset?
    You can't get it reset; if you could there would be no point in having it. If you have an encrypted backup there are two ways this could have happened:
    You checked "Encrypt Backup" in iTunes at some time in the past, either intentionally or by accident
    You have a corporate MS Exchange account and your Exchange administrator installed a security profile on your phone that requires the phone'a contents to be encrypted. This, in turn, requires the backup to be encrypted for obvious reasons.
    In either case you were prompted for a password the first time you backed up after whichever of these happened. So think about what you might have entered for a password at that time. Fortunately you get an unlimited number of tries. Other threads on this subject have shown that it is always a password known to the user, so it wasn't something made up by iTunes. Also, everyone who has figured it out has found it to be a different password type, so try your Apple ID password, your computer's login password, your WiFi password, your corporate domain password, etc. And try passwords that may have been changed since your first backup. As a last resort there is a professional password cracker available, but it isn't cheap - it's targeted at the law enforcement market - from Elcomsoft. There are also some scam password crackers available that don't actually work and possibly steal your information. It's likely that a developer of one or more of these will post a response with a link (possibly hidden) to their "product". So before clicking any links you might want to install the Web of Trust plugin that keeps track of scam sites and warns you. http://www.mywot.com.

  • How to Restore Data Deleted  from Time Capsule Hard Drive

    This question is more about the time capsule in general as opposed to a specific time machine issue.
    I'm using my time capsule as an external hard drive that I can access wirelessly and I have accidentally deleted a folder. It didn't go into the trash can on the computer I used to delete the file from my TC, it just disappeared. I have data recovery software (Data Rescue III) but it is unable to locate the TC since it is not a plugged in device. I've tried connecting my computer to the TC via wireless, ethernet, and usb but Data Rescue still won't detect the TC.
    How can I get the files back? Is there a way to restore files deleted from the TC when it's being used as a hard drive (not as a time machine for backups)?
    THANKS!!!
    Message was edited by: jenniex
    Message was edited by: jenniex

    There is only one USB port on the back of the Time Capsule, and AFAICT from reading Apple's documentation, the only uses for that port are to connect an external hard drive or printer. You could try connecting that port to your Mac directly via USB cable, but nothing I can find indicates it would work, and you would be solely responsible if it somehow damaged either device (which may or may not even be a possible side effect).
    Unfortunately, if connecting the Mac to the Time Capsule via USB does not work, you're probably out of luck. Unless you are willing to crack open the Time Capsule, remove the hard drive and put it in an external enclosure so you can access it with Data Rescue, your data will remain lost. Note for the future that you absolutely *should not ever* keep original, un-backed-up data on a backup drive. It's poor organization and dangerous to boot.

  • How to Restore iPhoto Library from BackUp?

    My iPhoto library has gone blank, although its trash has the 4,555 images. And all organization, albums, keywords, photo names, gone. Recently my backup storage, where library kept, went blank. I got a new backup, and a pro restored most of old data, and transfered to new one. So, I have the Library on the new backup, and need to restore it in the iPhoto Library, rather than create a new one, which as I understand will lose albums, keywords, etc. A friend says that way to hold down a key when opening iPhoto that will have it look for old library and restore? Not in Help or elsewhere.
    I had a MacBook Pro, when this first happen. Now have iMac and have iLife 09, but don't want to instal it until photo library restored.
    Sounds basic, but how to restore.
    Thanks,
    Armando

    Armando
    The simplest way to restore is to put the Library in the Pictures Folder and launch iPhoto.
    Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library' To select a Library.
    Regards
    TD

  • How to restore iTunes Library from Time Machine on Mavericks?

    Please, can someone give me the instructions on how to restore iTunes Library from Time Machine on Mavericks?

    See Pondini's TM FAQs, for details.

  • I upgrade my software how to restore my data from itunes

    i upgrade my software how to restore my data from itunes

    What data?
    Just sync it like you always do.

  • Restore a mac mini from the disk but getting error

    hi, im trying to restore a mac mini from the disk but its giving me the error "You cant open the app "Install Mac OS X" b/c Power PC apps are no longer supported. What can i do? Trying to sell computer.

    Are you booting from the disk? That should work but then you will have to through the the OSX updates to get back to ML
    I would try the mthod recommended by Eustace Mendis first. It just worked on me for ny 2010 Mini

  • When I update itunes it deletes the library file, and when I restore that file from the previous libraries or my backup, itunes will run but tell me "the iTunes library file cannot be saved. A folder was specified instead of a file" How do I fix this?

    When I update itunes it deletes the library file, and when I restore that file from the previous libraries or my backup, itunes will run but tell me "the iTunes library file cannot be saved. A folder was specified instead of a file" How do I fix this?

    Hi there Br0x,
    You may want to try rebuilding the iTunes library as an initial troubleshooting step. Take a look at the article below for more information.
    iTunes: How to re-create your iTunes library and playlists
    http://support.apple.com/kb/ht1451
    -Griff W.

Maybe you are looking for

  • How to add a Parameter to a Module Specificat​ions, programati​cally

    There is a module (based on vi) which I would like to add an additional parameter. As a result of this, I would need to call all the program steps where this vi is specified, reload it, and place a value (or expression) for the new parameter. I wonde

  • Installing and Uninstalling Forte 6, newbie questions..

    Hi, I really did not want to post these questions, but I have had no luck doing this and google hasn't been much help. First off, I have a botched install of Forte C 6U2 that needs to be uninstalled, it says to use the uninstall class in /var/sadm/pr

  • Synch Current Messages and Calls

    I Synched  my iPhone 5s to a 4s backup but my current messages and phone are not updated. Please help

  • RSPAN is breaking my connection to the Internet

    We have two Cisco 2960S switches and I am trying to setup RSPAN to monitor the trunk port to the gateway and send the traffic to a port on the second switch which is setup in a daisy chain.  The problem is that every time I enter the monitor session

  • Quality of replacement

    4 days age i went to sony service center with my SONY XPERIA Z1 because there was some issue related with vibration.At service center they said i have to leave my phone here for some days to fix this problem so i called them the day after then they s