Here's some fruits of my work...

This was a lot of fun to create (but also a lot of headache uncovering bugs...)
I think there's no question that the CS SDK is really cool technology!
http://in-tools.com/wordpress/script-bay/script-panel-replacement-for-the-entire-creative- suite
Harbs

You're the man! I can clearly see what you're talking about!
Just one question. When I open your panel for the first time and create my first script, then click "save". Where does it save the script to?
And the second is the suggestion - it will be cool to be able to see if my script ran properly till end. Some message, may be in the status bar, like "17:33 script ran successfully".
Anastasiy

Similar Messages

After upgrading to Firexfox 35.0 all vine videos, instagram videos and some webplayer videos dont work anymore.

After upgrading to Firexfox 35.0 all vine videos, instagram videos and some webplayer videos dont work anymore.
I get messages like:
ERROR 1
-Error Loading Media: File Could Not Be Found
http://i.imgur.com/5OaxOFC.jpg
ERROR 2
-Video can't be played because file is corrupt.
http://i.imgur.com/cqRpJOp.jpg
Before I start, I will like to point out some things Ive tried already so this doesnt end up being a back and forth of things already tried.
*Ive uninstalled adobe flash player
*Ive tried the whole
media.windows-media-foundation.enabled to false or to true
*Ive gone into safe mode and nothing
*Ive tried toggling off the plug-ins to see if anything I have problems with works. Nothing.
All the media that plays from different various players:
https://www.youtube.com/watch?v=v7IXmV6A6Bk
http://bestanimes.tv/mushishi-zoku-shou-2nd-season-episode-10/
http://www.watchcartoononline.com/mushishi-episode-26-english-dubbed <-- 2 embedded videos that both play.
All the media that wont play:
http://www.jwplayer.com/ <---- that front page video : I get ERROR 1 for this
http://videomega.tv/?ref=AJWOLaJQKbbKQJaLOWJA <--- I get ERROR 1 for this
And every vine and instagram video. Since I will be asked to post something from it here is something from vine and something from instagram
https://vine.co/v/OqxKQBJd3lm <---- I get a still image
http://instagram.com/p/up3CG6ooDP <----- I get error 2 if I go into page info and click the media tab and look for the video.
All my enabled plugins:
http://i.imgur.com/9fCZ1s2.jpg
Everything on my permissions even on the pages of the media I cant play is set to : Use Default.
Now, I thought this was just some kind plug-in problem, I even thought it was just something with the updated made Firefox incompatible with some of the webplayers. Of course I found out this was wrong. Keep on reading:
If your flash plugin crashes or if you terminate/end process in the Task manager, your video will be replaced by this grey message:
http://i.imgur.com/vudnNIM.jpg
https://www.youtube.com/watch?v=v7IXmV6A6Bk
http://bestanimes.tv/mushishi-zoku-shou-2nd-season-episode-10/
http://www.watchcartoononline.com/mushishi-episode-26-english-dubbed
http://www.jwplayer.com/
http://videomega.tv/?ref=AJWOLaJQKbbKQJaLOWJA
Now, all these videos I listed before, If I had them all open in tabs and then proceeded to terminate my flash plugin in Task Manager, they would all be replaced by that grey message window that the plugin crashed.
Now, after I updated firefox to 35.0, if I did the same thing
https://www.youtube.com/watch?v=v7IXmV6A6Bk
http://bestanimes.tv/mushishi-zoku-shou-2nd-season-episode-10/
http://www.watchcartoononline.com/mushishi-episode-26-english-dubbed
These three would show that grey message and these are the ones I can play
But these 2 the ones I have a problem with.
http://www.jwplayer.com/
http://videomega.tv/?ref=AJWOLaJQKbbKQJaLOWJA
they wont even be affected by it. Its like they arent even using the flash plugin.
Whenever I would terminate/end process my plugin from my task manager in 34.0 EVERYTHING, EVERYTHING would not work including every vine video and instgram video, it would either show that grey message that says the plugin crashed or it would not work. They would all work again when I refreshed the page. Everything, in 34.0 in my firefox was using the flash plugin.
Now, as I stated above I thought it was just some kind of webplayer and firefox 35.0 conflict that was causing these problems.
Until I saw this:
http://www.watchcartoononline.com/mushishi-episode-26-english-dubbed
http://i.imgur.com/gCaUMXm.jpg
http://i.imgur.com/V9w7ulS.jpg
http://www.jwplayer.com/
http://i.imgur.com/dqZtoTX.jpg
They are both using the same exact webplayer. THE SAME ONE.
I can play the first one
but the video in the front page of http://www.jwplayer.com/ I cant play it.
Which brings me to my final conclusion.
The reason I cant play some that fron page video of http://www.jwplayer.com/
videos from videomega.tv
and instagrams and vines
IS because of their file extension, their file types.
I went to the firefox options and clicked the Applications tab:
http://i.imgur.com/uWWKelX.jpg
http://i.imgur.com/HYBjwdZ.jpg
http://i.imgur.com/IK4C2WR.jpg
Shouldnt all those video file types be in : Use Shockwave Flash (in Firfox) instead of : Always ask
When I try to toggle it to something else I dont even get the option to use Shockwave Flash
http://i.imgur.com/gTH18S1.jpg
In Conclusion, what gives??
-In 34.0 Everything worked.
-If I terminated/ended process the Flash plugin in 34.0 everything would be affected by it , either by not working anymore or showing me that grey crash message.
-This all started when I upgraded to 35.0
-Has nothing to do with webplayer conflicting with 35.0 as proven above.
-The reason for all of this not working is the type of video extension they have. Judging from the examples I gave of the things I cant play, it would seem I cant play mp4, flv and whatever vine uses. Which I think its mp4 as well.
Anyways, how do I fix all this so it works like it did before I upgraded to 35.0

I looked at that but it only shows for Windows 8.1 , 8.0 , 7 , i have Vista , 64 bit Ultimate , would the Windows 7 one work ?? , or am i out of luck ?
And what plug-in icon in the address bar ?? , i don't see anything that pertains to any plug-ins
This is a example of one of the videos i was trying to watch , basically when you click the arrow in the center , it just goes away for a second then comes back and the video never plays , it just sits there , in the lower left corner i see a small popup that says javascript;
http://instagram.com/p/zAA6W8DAR9/?modal=true

I want to reset my ipod touch 4th gen but i have forgotten the restrictions passcode and for some reason its not working on my laptop on itunes and the restore thing wont work! any help?

I want to reset my ipod touch 4th gen but i have forgotten the restrictions passcode and for some reason its not working on my laptop on itunes and the restore thing wont work! any help?

Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...Re-Sync your Content
Note:
To remove a forgotten Restrictions passcode you will need to Restore the Device as New...
OR... From a Backup created Before the Restrictions Code was set....

Here are scripts for getting OAS302 working on RedHat 6.0

People have said this doesn't work. It works. It's just the
owsctl that doesn't work. I'm not saying that oas302 on RedHat 6
is the best solution anyone could come up with, but it does work,
and if you want to do it, here are some scripts that you can feel
free to modify and use as you wish. Various variables should be
updated with however you system is configured. Remember to start
the wrb (i.e. the second script) before you start any listeners.
Linux has a tendency to crash if you don't kill -KILL all the wrb
processes at the same time (i.e. the kernel gets an uncaught
exception and dies).
Erik
<disclaimer>
I do not guarantee these will work. I do not guarantee that
they will not destroy something important. I assume no liability
for what these scripts may or may not do. Use them at your own
risk. There is no expressed or implied waranty.
</disclaimer>
#!/bin/ksh
# Script to start the oraweb http servers to listen for requests
# because owsctl is kind of unpredictable under RedHat 6.0
# set this variable to be the directory that the webserver
# configuration drivetoryies are under (i.e.
# /db/app/oracle/admin/ows/web/httpd_my.host.com)
WEB_HOME=/db/app/oracle/admin/ows/web/httpd_my.host.com
LISTENER="$2"
if [[ -z "$LISTENER" ]]
then
echo "No listener name to start."
echo "Usage: listen {start|stop} listener"
echo "e.g.:"
echo " listen start admin"
exit 1
fi
case "$1" in
start)
OMN_ADDR=UDP:worf.gcg.com:2649
OWS_ADPCFG="$ORAWEB_HOME/admin/adpspy.cfg"
OWS_ADPSO="$ORAWEB_HOME/lib/ndwfs.so"
OWS_ORAWEB_FREEDOMX=1
export OWS_ADPCFG OWS_ADPSO OMN_ADDR OWS_ORAWEB_FEEDOMX
CFG_FILE=$WEB_HOME/$LISTENER/config/sv$LISTENER.cfg
if [[ -f "$CFG_FILE" ]]
then
oraweb -C $CFG_FILE
else
echo "Could not find config file for $LISTENER:"
echo " $CFG_FILE"
exit 1
fi
stop)
PID_FILE=$WEB_HOME/$LISTENER/config/sv$LISTENER.pid
if [[ -f $PID_FILE ]]
then
kill `cat $PID_FILE`
if [[ $? -ne 0 ]]
then
echo "Could not stop oraweb $LISTENER process."
exit 1
fi
else
echo "Could not find oraweb $LISTENER PID file:"
echo " $PID_FILE"
exit 1
fi
echo "Usage: listen {start|stop} listener"
echo "e.g.:"
echo " listen start admin"
exit 1
esac
#!/bin/ksh
# Script to start up the Oracle Web Request Broker (wrb)
# processes manually because owsctl doesn't work on RedHat
# Linux 6.0
TMP_FILE=/tmp/wrb.pids
case "$1" in
start)
SLEEP=3
if [[ -f "$TMP_FILE" ]]
then
echo "$TMP_FILE exits. Make sure the wrb is not
already"
echo "running, remove $TMP_FILE, and run this script
again."
exit 1
fi
if [[ -z "$ORAWEB_HOME" ]]
then
echo "ORAWEB_HOME is not set. This environment variable"
echo "should be set to the directory where the oracle was"
echo "lives, i.e. /app/oracle/product/8.0.5/ows/3.0"
exit 1
fi
OMN_ADDR=UDP:my.host.com:2649
OWS_ADPCFG="$ORAWEB_HOME/admin/adpspy.cfg"
OWS_ADPSO="$ORAWEB_HOME/lib/ndwfs.so"
OWS_ORAWEB_FEEDOMX=1 # I have no idea what this does; I read
# about it in a newsgroup. Supposedly
# it makes the oas run faster
export OWS_ADPCFG OWS_ADPSO OMN_ADDR OWS_ORAWEB_FREEDOMX
PATH=$ORAWEB_HOME/bin:$PATH
mnaddrsrv -D &
echo -n "$! " > $TMP_FILE
sleep $SLEEP
mnrpcnmsrv &
echo -n "$! " >> $TMP_FILE
mnorbsrv &
echo -n "$! " >> $TMP_FILE
sleep $SLEEP
wrbcfg &
echo -n "$! " >> $TMP_FILE
sleep $SLEEP
wrblog &
echo -n "$! " >> $TMP_FILE
sleep $SLEEP
wrbasrv &
echo -n "$! " >> $TMP_FILE
sleep $SLEEP
wrbahsrv &
echo -n "$! " >> $TMP_FILE
sleep $SLEEP
wrbroker &
echo -n "$! " >> $TMP_FILE
sleep $SLEEP
wrbvpm &
echo -n "$! " >> $TMP_FILE
sleep $SLEEP
wrbfac &
echo -n "$! " >> $TMP_FILE
sleep $SLEEP
wrbdm &
echo -n "$! " >> $TMP_FILE
sleep $SLEEP
stop)
kill -KILL `cat $TMP_FILE`
if [[ $? -ne 0 ]]
then
echo "Could not stop wrb processes. The PIDs are in"
echo "$TMP_FILE. If these are running, please"
echo "stop them manually."
else
rm -rf $TMP_FILE
fi
echo "Usage: wrb {start|stop}"
exit 1
esac
null

Hi Erick,
Your scripts for running the OAS302 on 6.0 linux had been very
helpful.
In fact, I dont know what would I have done without them.
Now I am able to run the listeners and even able to create the
packages and users in the database via the OAS 3.0.2 but the
problem starts when accessing a procedure in the database using
the pl/sql agent. By the way i am using Oracle 8.0.5.1 RDBMS and
its home is different than the webserver home.
The browser just does nothing and even does not log any error
message ,I have to stop it after a while but all my other
catridges are working.
any insight will be appreciated.
thanks,
Vikram ( Ironically enough I work for Oracle).
Erik Nielsen (guest) wrote:
: People have said this doesn't work. It works. It's just the
: owsctl that doesn't work. I'm not saying that oas302 on RedHat
6
: is the best solution anyone could come up with, but it does
work,
: and if you want to do it, here are some scripts that you can
feel
: free to modify and use as you wish. Various variables should
be
: updated with however you system is configured. Remember to
start
: the wrb (i.e. the second script) before you start any
listeners.
: Linux has a tendency to crash if you don't kill -KILL all the
wrb
: processes at the same time (i.e. the kernel gets an uncaught
: exception and dies).
: Erik
: <disclaimer>
: I do not guarantee these will work. I do not guarantee that
: they will not destroy something important. I assume no
liability
: for what these scripts may or may not do. Use them at your own
: risk. There is no expressed or implied waranty.
: </disclaimer>
: #!/bin/ksh
: # Script to start the oraweb http servers to listen for
requests
: # because owsctl is kind of unpredictable under RedHat 6.0
: # set this variable to be the directory that the webserver
: # configuration drivetoryies are under (i.e.
: # /db/app/oracle/admin/ows/web/httpd_my.host.com)
: WEB_HOME=/db/app/oracle/admin/ows/web/httpd_my.host.com
: LISTENER="$2"
: if [[ -z "$LISTENER" ]]
: then
: echo "No listener name to start."
: echo "Usage: listen {start|stop} listener"
: echo "e.g.:"
: echo " listen start admin"
: exit 1
: fi
: case "$1" in
: start)
: OMN_ADDR=UDP:worf.gcg.com:2649
: OWS_ADPCFG="$ORAWEB_HOME/admin/adpspy.cfg"
: OWS_ADPSO="$ORAWEB_HOME/lib/ndwfs.so"
: OWS_ORAWEB_FREEDOMX=1
: export OWS_ADPCFG OWS_ADPSO OMN_ADDR OWS_ORAWEB_FEEDOMX
: CFG_FILE=$WEB_HOME/$LISTENER/config/sv$LISTENER.cfg
: if [[ -f "$CFG_FILE" ]]
: then
: oraweb -C $CFG_FILE
: else
: echo "Could not find config file for $LISTENER:"
: echo " $CFG_FILE"
: exit 1
: fi
: stop)
: PID_FILE=$WEB_HOME/$LISTENER/config/sv$LISTENER.pid
: if [[ -f $PID_FILE ]]
: then
: kill `cat $PID_FILE`
: if [[ $? -ne 0 ]]
: then
: echo "Could not stop oraweb $LISTENER process."
: exit 1
: fi
: else
: echo "Could not find oraweb $LISTENER PID file:"
: echo " $PID_FILE"
: exit 1
: fi
: echo "Usage: listen {start|stop} listener"
: echo "e.g.:"
: echo " listen start admin"
: exit 1
: esac
: #!/bin/ksh
: # Script to start up the Oracle Web Request Broker (wrb)
: # processes manually because owsctl doesn't work on RedHat
: # Linux 6.0
: TMP_FILE=/tmp/wrb.pids
: case "$1" in
: start)
: SLEEP=3
: if [[ -f "$TMP_FILE" ]]
: then
: echo "$TMP_FILE exits. Make sure the wrb is not
: already"
: echo "running, remove $TMP_FILE, and run this script
: again."
: exit 1
: fi
: if [[ -z "$ORAWEB_HOME" ]]
: then
: echo "ORAWEB_HOME is not set. This environment variable"
: echo "should be set to the directory where the oracle
was"
: echo "lives, i.e. /app/oracle/product/8.0.5/ows/3.0"
: exit 1
: fi
: OMN_ADDR=UDP:my.host.com:2649
: OWS_ADPCFG="$ORAWEB_HOME/admin/adpspy.cfg"
: OWS_ADPSO="$ORAWEB_HOME/lib/ndwfs.so"
: OWS_ORAWEB_FEEDOMX=1 # I have no idea what this does; I read
: # about it in a newsgroup. Supposedly
: # it makes the oas run faster
: export OWS_ADPCFG OWS_ADPSO OMN_ADDR OWS_ORAWEB_FREEDOMX
: PATH=$ORAWEB_HOME/bin:$PATH
: mnaddrsrv -D &
: echo -n "$! " > $TMP_FILE
: sleep $SLEEP
: mnrpcnmsrv &
: echo -n "$! " >> $TMP_FILE
: mnorbsrv &
: echo -n "$! " >> $TMP_FILE
: sleep $SLEEP
: wrbcfg &
: echo -n "$! " >> $TMP_FILE
: sleep $SLEEP
: wrblog &
: echo -n "$! " >> $TMP_FILE
: sleep $SLEEP
: wrbasrv &
: echo -n "$! " >> $TMP_FILE
: sleep $SLEEP
: wrbahsrv &
: echo -n "$! " >> $TMP_FILE
: sleep $SLEEP
: wrbroker &
: echo -n "$! " >> $TMP_FILE
: sleep $SLEEP
: wrbvpm &
: echo -n "$! " >> $TMP_FILE
: sleep $SLEEP
: wrbfac &
: echo -n "$! " >> $TMP_FILE
: sleep $SLEEP
: wrbdm &
: echo -n "$! " >> $TMP_FILE
: sleep $SLEEP
: stop)
: kill -KILL `cat $TMP_FILE`
: if [[ $? -ne 0 ]]
: then
: echo "Could not stop wrb processes. The PIDs are in"
: echo "$TMP_FILE. If these are running, please"
: echo "stop them manually."
: else
: rm -rf $TMP_FILE
: fi
: echo "Usage: wrb {start|stop}"
: exit 1
: esac
null

FINALLY - Boot Camp 2.1 Installed Successfully. Here are some stats....

Well, I believe I have finally successfully installed Boot Camp 2.1 for Windows Vista 32-bit on a MacBook Pro. After trying last Friday to install it, failing miserably, and a weekend spent reinstalling operating systems, etc. I feel a bit better. Although, these problems shouldn't have to happen to begin with, in my opinion.
I have learned to backup even more religiously than I have before -- you don't know how many restore points, complete PC backups, etc. I have done over the past few days.
Anyway, here are some stats that I would like to compare with other folks to make sure that I have everything that this update was supposed to offer. I wish Apple would provide the details about the update, but they don't. Here are my statistics, many probably Windows Vista 32-bit specific.
_Miscellaneous Notes_
I have a MacBook Pro 2.2 GHz, 15", 4 GB RAM -- I bought it in June 2007 (I forget what the chipset is - Santa Rosa? - but it was a new model then)
I have Vista Ultimate 32-bit
I had Vista SP1 installed before installing the BC 2.1 update
I did not have any other language packs installed
If I right click on the Boot Camp icon in the taskbar and say "About", the version I see is Version 2.1 (Build 210A12)
Drivers
Apple Built-In Bluetooth: 4/6/2008, version 2.1.0.1
NVIDIA GeForce 8600M GT: 1/24/2008, version 7.15.11.6763
Apple Keyboard: 3/10/2008, version 2.1.0.0 (I had two of these listed)
Apple Trackpad: 8/28/2007, version 2.0.1.4
Apple IR Receiver: 11/1/2007, version 2.0.1.1
Built-in iSight: 6/21/2006, version 6.0.6001.18000
Apple Trackpad Enabler: 8/28/2007, version 2.0.1.4
Atheros AR5008X Wireless Network Adapter: 4/15/2007, version 7.2.0.204 (there may be an update to this that I haven't installed yet)
Marvell Yukon 88E8058 PCI-E Gigabit Ethernet Controller: 3/23/2007, version 10.12.7.3 (there may be an update to this that I haven't installed yet)
Realtek High Definition Audio: 11/14/2007, version: 6.0.1.5512 (Note: This was disabled after the install of BC 2.1. I had to reenable it in the device manager. I think maybe my virus scanning program might have done something, but I am not sure)
Note: I had 3 monitors listed in my Device manager, but I only have two -- the laptop monitor and an external monitor connected to it. That is weird, I think.
_Windows Experience Index_
Processor: 5.1
Memory (RAM): 4.8
Graphics: 5.9 (This might have went up with the new driver, I don't remember)
Gaming Graphics: 5.4
Primary Hard Disk: 4.6
Base Score: 4.6 (because of hard drive)
_Final Words_
This wasn't a smooth update at all by any means.
I hope this helps a little. Please let me know if you have the same sort of statistics.
Thanks.
Message was edited by: jmFightSpam
Message was edited by: jmFightSpam
Message was edited by: jmFightSpam

In my quest to figure out why my keyboard backlighting is not working, I decided to extract the BC 2.1 installer using 7-zip to see all of the individual drivers separately. Now, I don't know which driver is for the keyboard backlight, but I did try to install the TrackPad separately, and guess what, the original installation did not update the trackpad driver for some reason.
So now the the stats for the Apple Trackpad are:
10/9/2007, version 2.0.1.5

Mail rules work for some users, don't work for others

Ready to pull my hair out over this one:
Leopard to Snow Leopard upgrade went uneventfully, except for the fact that server-side mail rules (accessed via browser at FQDN -> Mail Rules) work for several users (two, to be exact) and don't for the rest (about 15 or so).
The usual culprits have been reviewed: 'Enable Server-Side Mail Rules' is checked in Mail -> Settings -> Filters, 'Allow users to configure server-side mail rules' is checked in Web -> Sites -> Web Services, users can create vacation notices and email rules without issue via browser, permissions look fine on the contents of /Library/Email Rules and /var/spool/imap/dovecot/sieve-scripts, logs give no indication of any foul play (at least the Email Rules -> debug.log generates the same entries for both functional and non-functional users), etc.
I have noticed that /var/spool/imap/dovecot/sieve-scripts contains only two items, which - you guessed it - line up with the GUIDs of the two functional users. Theoretically every user with a rule should be represented here.
As suggested in this thread:
http://discussions.apple.com/thread.jspa?messageID=11171395&#11171395
I created both a vacation notice and an email rule for several users, thinking that may force the folder creation for those users, but no dice. I even manually created folders for a few users with their GUIDs as the folder names and assigned each user ownership and read/write access. Still nothing. Created a few new test user accounts just to rule out any legacy account weirdness (although it's worth noting that I completely redid the OD and recreated user accounts after the upgrade) and replicated the problem with these, as well. Lastly, used Inspector to compare OD attributes between functional and non-functional accounts, with no glaring differences.
Help!

Did you find an answer? I encounter the same problem on my new MiniServer. Deleted and created all users several times, but just for some accounts mail is working.
Do you have the answer?
(new to this site, read a lot already, but not found)

Some keys are not working on my laptop

Hello, i am new here and this is my first question. I bought HP Laptop G4-1200TX from a local dealer 2 years ago. It worked fine till last year when i ,manually, upgrade its window from win7 home basic to win7 premuim and then to win7 ultimate. After sometime some of keys stopped working {last row keys - "z", "x", "c", "v", "m" (the last row alphabets except "b" and "n") and the spacebar stopped working}. Its been a long time now also the laptop is out of warranty. I havedone following things :
1) unistalled the keyboard from device manager and then reinstalled it again .
2) cleaned the keys by slightly pulling them up (there was no dust/dirt at all )
3) Removed the battery and hold the power button for full one minute and then reinserted the battery.
I Tried the above methods more than once but no success . I have also read your forum for similar question and answers but they were the same as above. Its really difficult to open on-screen keyboard everytime.Now i want it to be perfect more than ever since i had to go college where laptop is necessary. So i come to you now for some help. Early reply appreciated....
Thanks in advance............

Hi Shawnlegent, Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand you are having an issue with some of the keys on the keyboard. If you connect an external keyboard does it work properly? If so then it is not hardware. Have you run the The HP Support Assistant to help with updates and resolving issues?
Have you tried running Ms Fix it to assist you with resolving this issue?
Here is a link to Notebook Keyboard Troubleshooting (Windows 7) that may also help.
If it is the keyboard that is malfunctioning, here is a link to the HP 2000 Notebook PC Maintenance and Service Guide, please note page 18, item 2 for replacement keyboards.

Some Keys are not working on Lenovo G570

Hello all
I am new here, looking for some help regarding my Lenovo G570.
Yesterday, it was working perfectly, I properly shut is down. I have set a BIOS pasword.
Today, when I switch it on, I was unable to type the pasword becasu some keys were not working. However, I managed to loged in with the help of On Screen Keyboard. After analysing it, I came to know that some keys on numpad includeing 0,2 and on the 2nd line(vertical numerical keys) 1,2,3,4,7,8,9,0 are not working. I tried to re-install the OS but I set a BIOS paswoed containing one of the missing keys.
Please let me know whether it is a software problem or should i take my laptop to some repairing shop?
Thanks
Solved!
Go to Solution.

Hi Asadkhan92,
Welcome to Lenovo Community!
As per the query we understood that you are facing an issue with the keyboard in your Lenovo G570 laptop.
As you have mentioned that the some keys are not working in your laptop, as you have also mentioned that the onscreen keyboard is working, please connect the external keyboard and check for the issue, this is to confirm if the issue with the hardware or software.
If the external keyboard works fine and if the keypad is not working then it’s a issue with the keypad of the laptop.
Please visit the nearest service centre for further details.
Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
Hope this helps!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Some commands are not working nor in illustrator nor photoshop, any advice better than Adobe?

Illustrator is not fuctioning at 100%, some commands do not work ( eg - command open, nor place etc ) and same with photoshop....
Any advice

pcmyhre,
You may try the list, possibly starting with item 7) in 5), which is a list of the usual suspects, which may disturb and confuse Illy so she fails to do even simple things.
The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media, see below. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save current artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html
External media: It is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky (for a while), but the chances of file corruption and other unpleasantnesses are immensely greater when you use anything but the harddisk, and it is better to be safe than sorry.
In addition to the (far greater) risk of file corruption, some issues are mentioned here:
http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html

[svn] 3410: Here are some changes to DataGroup.

Revision: 3410
Author: [email protected]
Date: 2008-09-29 15:27:50 -0700 (Mon, 29 Sep 2008)
Log Message:
Here are some changes to DataGroup.
The big change is the way we instantiate components. We aren?\226?\128?\153t re-using the Group logic anymore. This means there?\226?\128?\153s no display object sharing going on, which reduces the complexity of the code. It also treats renderers differently now. Basically anytime a renderer is specified, it?\226?\128?\153ll attempt to wrap you up in that renderer, even if you are a GraphicElement or a DisplayObject and may not need one.
There are some other changes, like changing an itemRenderer at runtime now works. It?\226?\128?\153s a bit heavy in what it invalidates right now, but I?\226?\128?\153ll go back and revisit some of this logic.
Also, when no dataProvider is given, we don?\226?\128?\153t automatically create one for the user. This means I had to add some defense mechanisms where we were relying on the dataProvider, but doing a check for dataProvider != null was all that was really needed.
QE: Yes
Doc: Yes
Bugs: SDK-16809, SDK-16983
Reviewer: Glenn
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-16809
http://bugs.adobe.com/jira/browse/SDK-16983
Modified Paths:
flex/sdk/trunk/development/eclipse/flex/flex4test/src/flex4test.mxml
flex/sdk/trunk/frameworks/projects/flex4/src/flex/component/Selector.as
flex/sdk/trunk/frameworks/projects/flex4/src/flex/core/DataGroup.as

Hi there,
We had a glitch on our side that was causing some accounts to not be able to log in properly. It should now be resolved. Please clear your browser's cache and try it again. Let us know if it's working for you.
Regards
Mike

Macro won't change the language of some characters - GUI input works fine

I have an issue where certain characters in documents are in the SimSun font and the language is set to "Chinese (PRC)". I wrote a macro that successfully changes the font from simsun to another font, but it doesn't work if the language is Chinese
(PRC) and perhaps others, but this is the only case I have found so far.
It works fine if the language is English to begin with. Even more frustrating is that fact that, if I "Select All -> Language USEnglish" via the GUI after I run the SimSun change macro, the characters that the macro already worked on will change
appropriately.
However, if I try to change the language with a macro it doesn't work. I can literally record my actions that work as a macro, but when I run the macro, it doesn't work.
Does anyone know what causes this behavior? Is there any way to fix it?
This is what I use.
Selection.WholeStory
Selection.LanguageID = wdEnglishUS
Application.CheckLanguage = False
Thanks!

Edit: I'm currently working with Word2013 but I know this same behavior is replicated in word 2010 on a different computer.
Okay, here is some test data:
https://onedrive.live.com/view.aspx?cid=608A603435D13670&resid=608A603435D13670%21111&app=Word
and here is the data after I run the macro:
https://onedrive.live.com/view.aspx?cid=608A603435D13670&resid=608A603435D13670%21116&app=Word
If I manually (through the GUI) select all and set the language, the text comes out fine. However, those steps have no effect when run as a macro, even if I record them and they while they work correctly.
I actually can't seem to change the language of Chinese (PRC) at all with a macro but the GUI does seem to work.
Here is the full code that I am running. It's got a few extra lines in there because I was trying to figure out if I could get it to change the language to English somehow:
Sub charReplacement(charToRep As String, replacementChar As String)
Selection.HomeKey wdStory
With Selection.Find
.ClearFormatting
.Format = False
.Text = charToRep
With .Replacement
.ClearFormatting
.Text = replacementChar
End With
.Execute Forward:=True, Replace:=wdReplaceAll
End With
Selection.WholeStory
Selection.HomeKey
With Selection.Find
.Text = replacementChar & " "
.Replacement.Text = replacementChar
.MatchCase = False
.MatchWholeWord = False
.MatchWildcards = False
.ClearFormatting
.Replacement.ClearFormatting
.Execute
.Execute Replace:=wdReplaceAll
End With
End Sub
Sub changeSimSun() 'N.B.: This method appears not work when the language is something other than US/UK English
ActiveDocument.TrackRevisions = True
Selection.WholeStory
Selection.LanguageID = wdEnglishUS
Application.CheckLanguage = False
Selection.NoProofing = False
Application.ResetIgnoreAll
ActiveDocument.SpellingChecked = False
ActiveDocument.GrammarChecked = False
ActiveDocument.ShowGrammaticalErrors = True
ActiveDocument.ShowSpellingErrors = True
Selection.HomeKey
Selection.Extend
currentFont = Selection.Font.Name
Selection.HomeKey wdStory
Selection.Find.ClearFormatting
Selection.Find.Font.Name = "SimSun"
With Selection.Find
Do While .Execute(FindText:="", Forward:=True, _
MatchWildcards:=True, Wrap:=wdFindStop, MatchCase:=False) = True
Selection.LanguageID = wdEnglishUS
Selection.Font.Name = currentFont
Selection.Collapse wdCollapseEnd
Selection.MoveRight 1
Loop
End With
Selection.WholeStory
Selection.LanguageID = wdEnglishUS
Application.CheckLanguage = False
'simsun character replacement
charReplacement ChrW(8451), "°C "
charReplacement ChrW(12289), ", "
charReplacement ChrW(65287), "'"
charReplacement ChrW(65041), "'"
charReplacement ChrW(65288), "("
charReplacement ChrW(65288), ") "
'symbol character replacement
End Sub

HP 650 NOTEBOOK PC SOME KEYBOARD KEYS NOT WORKING

HELLO, I HAVE A PROBLEM WITH MY KEYBOARD KEYS.
SOME OF THEM DONT WORK, SO I THOUGHT IT WAS THE KEYBOARDs PROBLEM
SO I JUST BOUGHT A NEW KEYBOARD PART. I TOOK OF THE OLD AND INSTALLED THE
NEW ONE...STILL THE SAME KEYBOARD KEYS WONT WORK. PLEASE HELP ME...
THANX, N.
This question was solved.
View Solution.

Hi lialou,
I got your message about the new keyboard failing. I would recommend doing a full System Recovery to see if that restores the function back to those keys. Make sure that you back up your data beforehand.
Performing an HP System Recovery (Windows 7)
Performing an HP System Recovery (Windows 8)
If that doesn't work it could be an issue with the connecting cables and you should give us a call regarding repair options. You can reach HP Total Care at 1-800-474-6836 in North America or start here if you live outside of North America.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

HT201412 my wifi button does not working / it looks grey and can not open it... and my some applications does not working too ... please help me ... I bought this I phone from Beirut/Lebanon and i live in Turkey...

my wifi button does not working / it looks grey and can not open it... and my some applications does not working too ... please help me ... I bought this I phone from Beirut/Lebanon and i live in Turkey...

Here you go:
http://support.apple.com/kb/ts1559

Has anyone tried drawing/painting? post some pics of the work you have done using photoshop touch.

has anyone tried drawing/painting? post some pics of the work you have done using photoshop touch. is it possible. Thx!! :-D i really want this app

Hi kingmj2008,
Not some much drawing or painting specifically, but found some examples of peoples work using the app here:
https://www.facebook.com/PhotoshopTouch?sk=photos
-Dave

My email is changed on my apple id and now some apps do not work anymore incl icloud. What to do

My email address changed so altered it in apple id. However now some apps do not work anymore. And my email there seems not changeable
I.e appstore, icloud, search friends etc
Thx for yr help

Hi frisbo1312
I am in the UK and eventually found the problem was due to my BT Home Hub Router. Not sure where you live, but of you are in the UK, this might work for you.
I found this fix below on https://discussions.apple.com/thread/4604180?start=15&tstart=0
It worked for me. If you can't link to the URL, here is the body of the text
There's an issue related to the BT homehub that is providing a hostname that is "syntactically incorrect" for several smtp server.
Here's how you can fix it.
Using your internet browser, go to the address "192.168.1.254
- Follow instructions to reset your password if asked.
- Then go to "Settings", then "Advanced Settings" and "home network"
You will see there all the devices that are connected or that has been connected before. It's gonna be easyer if yout computer is the only one connected.
Your computer should have a name like "unknown-xx:xx:xx:xx:xx ...
Click on this name, chose another name without any special characters, like "macbook" for exemple.
And then click on "apply"
- restart your computer.
That should fix the issue.
Credit goes to vincentfromcork for providing me with the solution.
Spread the word

Here's some fruits of my work...

Similar Messages

Maybe you are looking for