Here we go again- 3g AND Edge data problems - NYC area

Just great.... been having great 3G data speeds for the past several weeks (after the data outage) and since last night (10/12) I cannot get a page to load. Sometimes it doesn't load at all, other times it takes about 5 minutes. What the heck is going on? I am in Woodside, Queens. I tried restarting/Restoring/etc...all that usual good stuff. Also, Edge seems to be affected as well. Anyone else having the same problems?
By the way- Same problem on my wife's 3G phone.

Symptoms for a week and a half:
-Full 3g signal but zero data throughput. I'll try to visit a page and there's zero progress for a few minutes so I give up.
-Dropped calls, sometimes 5+ within a minute while you're helplessly trying to redial someone.
I've done multiple soft-reset efforts such as 3G off/on, airplane mode on/off, rebooting, etc. to no avail. Nothing seems to help so I'm convinced it's ATT and their network.
I live near Times Square and work in SoHo. 5 full bars of 3g everywhere I go and the sad thing is... I've resorted to using edge only since the 3G isn't functional.
So yea... right now I paid a pretty penny to upgrade my 1st gen iPhone to essentially have GPS, a flush headphone jack and slightly improved speakers.

Similar Messages

My daughter register her ipod with my account and now all my contacts are gone?

my daughter register her ipod with my account and now all my contacts are gone and I have her contacts in my iphone I need my contacts back!!

If you are sharing the same iCloud account your data will be merged. Then if she deleted your contacts from her device, they would have been deleted from yours too.
The first thing to do is migrate your daughter's iPod to her own iCloud account (you can continue to share the same iTunes ID; it does not need to be the same as the ID you use for iCloud). To do this, start by saving any photo stream photos she wants to keep to her camera roll (unless already there) by opening her my photo stream album, tapping Select, tap the photos, tap the share icon (box with upward pointing arrow), then tap Save to Camera Roll. Then go to Settings>iCloud, tap Delete Account (which only deletes it from this device, not from iCloud), choose Keep on My iDevice and provide the password to turn off Find My iPhone. Then sign back in with a different Apple ID to create her new account and choose Merge to upload your data.
Once she is on her own account, you may be able to recover your contacts from your iCloud backup by following these steps: https://discussions.apple.com/docs/DOC-4841.

Is it possible to install ios 5 on a 2nd gen touch,i would love to give this to my daughter for her to play games with and none of the games are supported

is it possible to install ios 5 on a 2nd gen touch,i would love to give this to my daughter for her to play games with and none of the games are supported

Sorry, no. 4.2.1 is the highest possible for that model.

Turning off 3G and EDGE Data

I'm considering buying an iPhone from Fido (in Canada) and would never need the data. I'm able to buy it for the $200 and pay $35 a month for just a phone plan, but even without data, you can still access 3G and EDGE at 5cents per KB.
I want piece of mind that I won't rack up a $5000 phone bill accidentally, and want to have my iPhone set so that it will never ever use 3G or EDGE. Is there a method to doing this?
I plan on calling and asking that they do it, but I can never trust phone companies, especially the reps on their 1-800 numbers.
Thanks.

Well considering the fact that my iPhone is on pre-paid, and i only use the internet programs (safari/maps/appstore/stocks/youtube/ etc) when it's really urgent, would I still end up with a substantial bill?
If you don't have a data plan and you are paying for data access as you go, then it depends on how much data is downloaded and uploaded when connected to the internet via the cellular network, and you will be charged by the KB uploaded and downloaded.
The only app that can run in the background accessing data via the cellular network is the Mail client - if you have an email account or accounts automatically being checked for new messages.
If you don't have Safari launched and running downloading a web page, Safari is not accessing any data. The same for the Maps application, Stocks, YouTube, Weather, etc.
Keep in mind that Safari downloads much more data than browsers available with other phones. If a website you are visiting doesn't have a mobile version of their website available, you will be downloading the full version of the website - graphics and all, just like accessing the website on your computer, except for Flash content. Many websites are graphic intensive, so the data downloaded when accessing a graphic intensive website can be substantial with the iPhone.

Wifi and mobile data problems

Hello
I am reporting a problem regarding the wifi and mobile data on my Xperia Z1. Whenever I lock my phone, the wifi and mobile data keeps turning on by itself again and again. I have tried to turning the "automatic turn on wifi when sleep" to "never" but it keeps turning "always" whenever I lock my phone, so does the mobile data. I look forward to some replies.
Sincerely

Hi @Nick2510 I suggest you to first run a backup of the device information like this: http://talk.sonymobile.com/t5/FAQ/Backup-amp-Transfer/m-p/407253#U407253 Try performing a system repair using PC Companion: http://support.sonymobile.com/gb/tools/pc-companion/ This will factory reset your phone and erase all data. You might need tocharge your device for about 1-2 hours before so the device has at least 80% battery. Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device). Start PC Companion and select Support zone then Update my phone/tablet then in Blue Repair my phone/tablet and follow the on screen instructions - When prompted connect your phone still switched off holding volume down or back button - This should start the repair or reformat process. If you are using Windows 8/8.1 or a 64bit operating system then adjust the settings for PC Companion and run in compatibility mode and chose
Windows 7 or XP. I hope can be useful. I'm at disposal for any question. Best Regards,

Goods Receipt and Goods Issue - Posting Date and Document Date Problem

Hi All,
I was using SDK to build own add on to insert Posting Date and Document Date under Inventory> Inventory Transactions> Goods Receipt and Inventory> Inventory Transactions> Goods Issue, but the UI Screen Posting Date and Document Date shown current date.
My SAP Business One version was 2007A SP00 PL42 and alreadly upgrade to SP05.
End up result still the same.
Is there someone can help me?
Thanks you.
Best Regards,
danny

Hi there,
I already solve it by myself.
Actually is i call the initialization twice:
Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInventoryGenEntry)
Thats what make this problem happened.
Sorry.
Best Regards,
danny

Sales order with Compl.deliv., Lead time and Shipping date problems

Hello, SAP gurus!
We have some concerns with sales orders that won't start processing, and I'm wondering if there's anyone here who have had experience with this problem.
If not, hopefully you understand this scenario.
Scenario:
* A salesorder with three lines, of which two lines are not in stock (itemcategory YBAB), one line in stock (itemcat TAN)
* Requested delivery date is asap, ie 19/03-2014
* Marked with Complete delivery
* In the Shipping tab, it seems all dates are copied from lead time of the YBAB-lines, 11/06-2014.
* We just received the two YBAB-lines on PO, but the date still shows 11/06-2014, almost a month from now.
Is it possible to make SAP automatically change the shipping date to the date we actually receive the items and are ready to process the order?
What we have now is a salesorder made 2 months ago, ready to be packed and shipped today, but SAP seems to hold on to the "expected" date a month from now. It's frustrating!
Hope to hear from you

Hello,
You will need to trigger a av. check again to factor the impact of receipt of YBAB items.
You could evaluate backorder processing to automate this as a daily run to work on the sales order relevant for re-ATP based on new availability situation.
Thanks,
Sudhir

IOS 8.2 and cellular data problem

Sorry for my broken english.
I'm using Ipad mini - cellular data + wifi -16GB
I have a problem with my ipad, when i try to upgrade ios 8.2 , a sign say that ''unable to install update'' and give me 2 choice which is''Close'' or ''settings''(setting means back to GENERAL again) .So i just ignored because i get info from one of the website say ''be patient,because many people try to download i.o.s 8.2'' and when i try to use CELLULAR DATA ,it appear searching....... keep searching until an hour. I have try reboot 2/3 times but still my Cellular data still searching.....but my Wifi lines no problem .
Can someone help me .

I have try to turning off and on but no use because is still keep searching and till now while the ios cannot to install update even thought i have delete some of my application to upgrade.
But when i take my sim and use to my phone, it work and when i insert back to my ipad i keep telling ''searching'.....''

Sql date and util date problem: plz help

Hi,
Following is the scenario I am dealing with....
I have two feilds in the DB, of type Datetime. First field say.. 'DBDate' have date in it, and second field 'DBTime' has time in it. This much part I can not change.... I can change rest of the part so please guide me accordingly....
I am getting both the values from the DB using
long day = rs.getDate("DBDate").getTime();
long tme = rs.getTime("DBTime").getTime();Now I have to create a completly new java.util.Date object using this date and time. So, I am adding both the long values and trying to create a new data object usingjava.util.Date ext = new java.util.Date(day+tme); But the ext date over here is 6 hrs later time than actual text of the Date in the DB. that is if the date and time in the DB is "5/27/2003" and "4:40:00 PM" the resulting date is "5/27/2003 10:40:00 PM", which could be equivalent GMT time w.r.t. the DB Timezone.
But I want the final date to be the same as the DB Time Zone.....
if you need more detailed information reply me... i will post it .....
Thank a lot in advance...
Ri

But the ext date over here is 6 hrs later time than
actual text of the Date in the DB. that is if the date
and time in the DB is "5/27/2003" and "4:40:00 PM" the
resulting date is "5/27/2003 10:40:00 PM", which could
be equivalent GMT time w.r.t. the DB Timezone.
How do you know that that is the date in java?
Are you doing this?
System.out.println("d=" + mydate);
If so, and as previously pointed out, you are printing out a time that is relative to your time zone. Is the time in the database relative to your time zone? If not then you have a problem. And if the time in the database is relative to any time zone other than GMT then your extraction method is incorrect as well.

RSA3 data in R/3 and PSA data in BI are different values for same Doc No.

Hello BI experts,
I have a weird situation in BI. RSA3 and PSA are not reconciled for same Doc no.
Data Source: 0FI_AR_4 (enhanced in user exit with some custom fields as well)
Extracting data using Infopakcage in BI as a Init load into PSA.
The values in RSA3 in R/3
Doc No           Amount
1400003125      714.29
The values in PSA in BI
Doc No           Amount
1400003125     581.56
Anyone come across this situation. Any help would be greatly appreciated.
Thanks much,
Anil

1. yes selections are same in RSA3 and in Infopackage
2. Yes pulling all data records in RSA3. Thats only record exits for that doc#
3. Its not a delta, we are pulling in RSA3 all records and Initial load to PSA.
Thanks much,
Anil

Oracle 9i and PreparedStatement Date Problem

Hi, I am working with Oracle 9i and it's version of the classes12.zip driver and I am having difficulties in storing a date value using a PreparedStatement. I only care about the date, but I have tried going the Timestamp route as well and get the same results.
The PreparedStatement's parameters are being set successfully (using setDate or setTimestamp) but when the executeUpdate method is invoked, the process hangs. If I remove the Date (or Timestamp) from the insert, all works as expected.
Has anyone else came across this problem and if so, how did you get around this?
Thanks!
-Brian

That certainly hasn't happened with any other database including Oracle 8.
Perhaps you might want to take another look at your code to make sure that it really isn't hanging but instead appears to do so when an exception occurs.

IOS 8.2 and cellular data problem Iphone 5

Hi team,
I am using Apple 5 32GB, recently I upgraded to IOS 8.2.
From that date onwords my Cellular data is not enabled. It enabled after I restart the mobile. after some time again same proble.
Please look into this issue.
Regards,
Sri.

Does that mean it will not turn on? Does this mean you cannot see the on/off switch in Cellular? Does this mean it is on but not working? Please provide more information if you would like someone to help.

Restore settings and erase data problem

I have set my Iphone 4 to restore all settings and erase all data, however, after 4 & a half hours of this process, it is still not restored. Any ideas please?

now up to around 5 hours

3G & EDGE Data Service

Has anyone else today had problems accessing AT&T's 3G and EDGE data networks? I have full service, and the 3G/EDGE icon is appearing, however I cannot get on the internet, check email, use apps store or anything else that requires data service.

I just switched over from SprintPCS and purchased a brand new iPhone 3G running the latest 2.0.2 sw. I must admit, the phone is great but service is terrible to say the least - and it's not entirely AT&T's fault here.
I have a BlackBerry Pearl with AT&T also and tried both of them sitting side by side (in Central NJ) trying to load Google. Both devices show the same # of service bars.
The BlackBerry on Edge loaded within 3 seconds while the iPhone (in 3G) sat pretty spinning away then finally throwing "backend not responding" in Safari.
I switched the iPhone to the Edge network and same behavior. This clearly isn't an AT&T issue as both the BlackBerry AND the iPhone are both running on AT&T edge. The Berry responded within seconds and the iPhone timed out consistently. The silence from Apple on this issue is creepy! This could make for an interesting YouTube video.
Now, I'm in lower Manhattan and the 3G and Edge services are running intermittently.
Has anyone else encountered this behavior? Has there been any word from Apple on this? Should I bail on the iPhone 3G as being busted? I just signed up for the new contract + phone 5 days ago and haven't been able to go online with it much at all (except when on WiFi).

Need to DELETE and LOAD data of the Last month to

Hi Experts,
I need to delete the last month data from cube because One material is not updated with a Required value. We have made some changes in Update routine for a Value. The Same change must be reflected from last month of data ,
So I need to delate the data based on selection. And reload the data again. And the data flows from
                                           2LIS_13_VDITM (Info Source ) to ZSD_C03 (Info Cube).
I read many SDN threads, but I am getting confused.
How can I proceed for these ?
Thanks,
Utpal.

Hi Srikanth,
Thank you for responding.
I had a problem on one material. So deleted the request and Reload it from PSA. That issue got solved.
And Now the problem is , Now my senior is saying Delete the data from April-09 till date and Reload it. The issue is My CUBE ( ZSD_C03 ) is updated with 4 data sources. 2LIS_11_V_ITM   , 2LIS_13_VDITM   , 2LIS_12_VCHDR , 2LIS_11_VAITM .
And I need to delete data from 2LIS_13_VDITM data source . How Can I proceed for the current issue   ?
Please suggest   ...
Thank you ,
Utpal

Here we go again- 3g AND Edge data problems - NYC area

Similar Messages

Maybe you are looking for