Here we go again. Need some help please.
Had a lot of probs with first m/b. Finally got them to RMA it at gameve.com now the m/b seems to be acting right but when trying to install windows XP I keep getting BSOD. It has happened like 4 times. Anyone here know a work around for this? I have been trying to put this rig together for a month now and keep running into crazy problems. Any and all help will be appreciated.
Thanks.
-Roll
Oh yea, the specs are:
K8t800
3200+ 64
3200 mushkin black level 2 (1 gig, only trying 5122 atm)
Cant remeber the name but a solid 530 watt psu.
saphire 9800 pro.
Maxtor 80 gig 7200 rpm HDD
he ASCII standards say that the If the FSB can't handle the Memory speed than the CPU operates at a slower rate to try to best accomidate the Bus size. Think about it. The bus gets to much info and the cpu gives two little, which will lead to low efficiency and really serious heat issues. The RAM gets hot, data gets lost, the data times out in RAM. Try replacing them. I know it's a pain in the ass but I've had loads of RAM problems on even slower machines. Might work. Computers have their way of being a pain in the ass.
Similar Messages
-
Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
Already gone through troubleshooting guide a zillion times. Thanks.This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
I got my artwork and saved it to my Desktop
Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
Clicked "resize" and a box for changing it opened up
Checked the box "Pixels" and "Unchecked maintain aspect ratio"
Set Horizontal for 640 and Vertical for 480
Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now. -
Hi! I got Movies on my external hard drive that are AVI kind and won't play on my macbook pro? When I start playing the movie a message pops up and says "a required codec is not available". I tried flip4mac, xvid, divx already and still not playing my video. need some help please!! thanks.
Although vlc mentioned above is a much more powerful and better player you could try installing Perian if you insist on using the quicktime player. It may supply the codec it needs.
Not sure why you wouldn't be able to play straight avi files though in quicktime. -
Ok i got my iPod from my brothers friend and my IPod says "iPod is disabled connect to iTunes" then my computer says cannot get onto iPod because I need the iPod passcode and of course I cannot put it in so I need some help please
Try placing in DFU mode and then restoreing.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
Really really need some help please.
lost all my audio. nothing plays anymore. cant even hear the trash empty any more. no itunes, nothing. no dvd audio. also noticed itunes wont play songs anymore, progress bar just sits there. also movies on youtube dont play anymore. when i try to turn up audio i get a zero symbol with a slash thru it. im stumped. help please. thanks
Whatever has happened, I've assumed it just happened and is systemic.
To start: Go to Applications/Utilities and run Disk Utility, select your startup drive, and click on the Repair Permissions button at the bottom of the window.
If that works, you're done, if not, pull out your Tiger startup DVD, insert it, select the Installer, and Restart your Mac from the DVD. When you get to the installer screen, go to the menus at the top of the screen and select Disk Utility, and this time click on the Repair Disk button. This will check your file system integrity and repair it.
When you've done that, post back.
If those don't work, you may need to do an Archive & Install, from this same DVD. This will preserve your accounts/apps/data, but will require you to repeatedly run Software Update to bring everything current again.
Good Luck... -
I am the biggest "Newb" on this site, and I really need some help please..
Ok, the short of it.... I started training on Database programming about 2 weeks ago. I still don't really know a thing, or even understand the concepts. Now, my boss wants me to fix a bug in Oracle, and I haven't a clue. The ONLY help I've gotten was a link to this forum, and a speech about how I need to help myself. I told him I have the same chance of fixing anything, as monkeys typing hamlet. Anyone up for a challenge?
When I go to Application System, then Application Entry and enter the password a dialog box appears.... "FRM-40039: Cannot attatch library Empower while opening from APPUSRAPP."
That's what I have to fix. I have no clue. I don't even really know how to click around in this program. Please help, someone.
UPDATE: I've been told that everyone's pretty much going to be a jerk to me for asking this, and I'm currently searching old threads and can't find a way to delete this one I posted. So, you could just ignore the post, or jump in and be the internet tough-guy and tell me what I already know.... I'm a newb.
Edited by: user11033020 on Apr 14, 2009 11:41 AMAs this appears to be a Forms error (the error begins with FRM) you might get a better response by posting this in the Forms forum:
Forms
The Community Feedback forum isn't meant for product-related questions (as it says in the title).
Still, you should consider searching Metalink as well. If you've paid for support, you have every right to use it. -
2100 WLC 1130 APs - need some help please
It's been about 5 years since I took my CCNA course and could use some help on a wireless set up for church.
We have a Catalyst 3550 that is running fine, just a few VLANs, including 30 for public wireless. I've then got a 2100 WLC and (3) 1130 AP's. After much head banging, I've got the WLC set up correctly (i believe)
VLAN 30 is a 10.0.3.x segment
switch is 10.0.3.1
WLC mgmt interface is 10.0.3.20 - connected to the switch on port 1
WLC ap mgmt interface is 10.0.3.21
APs pull 10.0.3.30, 31,32. - they are plugged directly into the switch
I can obviously see the APs while in the WLC GUI.
The AP's SSID don't show up wirelessly. The AP's circle is red/orange
The detail on the AP in the WLC shows them operationally down.
What additional information can I provide?
Much thanks.flashfs[0]: 28 files, 8 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 6973952
flashfs[0]: Bytes available: 9025024
flashfs[0]: flashfs fsck took 28 seconds.
Base ethernet MAC Address: 00:0a:b8:12:30:3c
Initializing ethernet port 0...
Reset ethernet port 0...
Reset done!
ethernet link up, 100 mbps, full-duplex
Ethernet port 0 initialized: link is up
Loading "flash:/c1130-k9w8-mx.124-23c.JA4/c1130-k9w8-mx.124-23c.JA4"...#########
File "flash:/c1130-k9w8-mx.124-23c.JA4/c1130-k9w8-mx.124-23c.JA4" uncompressed a
nd installed, entry point: 0x3000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C1130 Software (C1130-K9W8-M), Version 12.4(23c)JA4, RELEASE
SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Fri 27-Jan-12 19:52 by prod_rel_team
Proceeding with system init
Proceeding to unmask interrupts
Initializing flashfs...
flashfs[1]: 28 files, 8 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 15740928
flashfs[1]: Bytes used: 6973952
flashfs[1]: Bytes available: 8766976
flashfs[1]: flashfs fsck took 4 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.
Radio0 present A506 7100 E8000000 A0000000 80000000 3
Radio1 present A506 6700 E8000100 A0040000 80010000 2
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-LAP1131AG-A-K9 (PowerPCElvis) processor (revision A0) with 27638K/51
20K bytes of memory.
Processor board ID FTX1027T1S2
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 7.0.230.0
1 FastEthernet interface
2 802.11 Radio(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:0A:B8:12:30:3C
Part Number : 73-8962-09
PCA Assembly Number : 800-24818-08
PCA Revision Number : A0
PCB Serial Number : FOC102618H2
Top Assembly Part Number : 800-25544-06
Top Assembly Serial Number : FTX1027T1S2
Top Revision Number : A0
Product/Model Number : AIR-LAP1131AG-A-K9
% Please define a domain-name first.
Press RETURN to get started!
*Mar 1 00:00:05.580: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self t
est passed
*Mar 1 00:00:07.185: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self
test passed on interface Dot11Radio 0
*Mar 1 00:00:08.783: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self
test passed on interface Dot11Radio 1
*Mar 1 00:00:08.860: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log
(contains, 135 messages)
*Mar 1 00:00:08.889: status of voice_diag_test from WLC is false
*Mar 1 00:00:10.995: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to
up
*Mar 1 00:00:11.052: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1130 Software (C1130-K9W8-M), Version 12.4(23c)JA4, RELEASE
SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Fri 27-Jan-12 19:52 by prod_rel_team
*Mar 1 00:00:11.053: %SNMP-5-COLDSTART: SNMP agent on host CenterHall is underg
oing a cold start
*Mar 1 00:00:11.133: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Mar 1 00:00:11.312: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Mar 1 00:00:11.312: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:00:11.312: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:00:11.552: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to r
eset
*Mar 1 00:00:11.552: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to r
eset
*Mar 1 00:00:11.999: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
et0, changed state to up
*Mar 1 00:00:12.316: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
0, changed state to down
*Mar 1 00:00:12.316: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
1, changed state to down
*Mar 1 00:00:19.436: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D
HCP address 10.0.3.30, mask 255.255.255.0, hostname CenterHall
*Mar 1 00:00:29.995: status of voice_diag_test from WLC is false
*Mar 1 00:00:30.070: Logging LWAPP message to 255.255.255.255.
*Mar 1 00:00:30.123: %CDP_PD-2-POWER_LOW: All radios disabled - HIGH_POWER_CLAS
SIC_NOT_CONFIGURED WS-C3550-12T (000a.8a97.f785)
*Mar 1 00:00:31.123: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.
255 started - CLI initiated
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (8.8.8.8)
Translating "CISCO-LWAPP-CONTROLLER"...domain server (8.8.8.8)
*Feb 11 15:46:42.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_i
p: 10.0.3.21 peer_port: 5246
*Feb 11 15:46:43.000: %CAPWAP-5-CHANGED: CAPWAP changed state to
wmmAC status is FALSE
*Feb 11 15:46:44.672: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully
peer_ip: 10.0.3.21 peer_port: 5246
*Feb 11 15:46:44.674: %CAPWAP-5-SENDJOIN: sending Join Request to 10.0.3.21
*Feb 11 15:46:44.674: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*Feb 11 15:46:45.449: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
*Feb 11 15:46:45.718: %CAPWAP-5-CHANGED: CAPWAP changed state to UP
*Feb 11 15:46:45.767: %CAPWAP-5-JOINEDCONTROLLER: AP has joined controller grace
wireless
*Feb 11 15:46:45.815: %LWAPP-3-CLIENTEVENTLOG: SSID GUMC_Guest added to the slot
[0]
*Feb 11 15:46:45.818: %LWAPP-3-CLIENTEVENTLOG: SSID GUMC_Guest added to the slot
[1]
*Feb 11 15:46:45.834: %WIDS-5-ENABLED: IDS Signature is loaded and enabled
User Access Verification
Username: Cisco
Password:
CenterHall> -
I've gone through the trouble shooting questions and still no connection.
My sister can recieve and to facetime from her family
And can you do the same? -
My first java programming - Need some help please!!!
I have to create a simple java program which i am not good at i am ok in C but my java is quite bad. The program need to define a class called Student and with a string called StudentNAme, a integer StudentID(key), An array of 8 integers called Marks that holds the students marks for 8 modules. It also says Include appropriate accessors, mutators and constructor(s) as well as a method to update the student�s marks. Anybody please help me in this question. I prefer an simple example of this program so I can learn faster, I dont even know how to declare a class.. So sorry but please help me out and thanks in advance
I would also suggest you try using an IDE like
eclipse (free)
www.eclipse.org
This will help you get a working program much faster.But please do also tell them that if they have troubles using it, they're supposed to read the IDE manual instead of posting here. -
Just got a new printer and i,m new to all this and i need some help please
Hello everyone since i,m new here and i,m trying to fined out how to fined how to get the printer claim code for my new printer as this is my first time useing 1 please could someone help me fined it as its doing my head in.
My printer is a HP Deskjet 1510 All-in-one series . Thank youHi,
Is this the one ?
http://h10025.www1.hp.com/ewfrf/wc/document?cc=au&lc=en&docname=c03775352#N132
No, it doesn't have claim code. Only printers with ePrint enable/ready have claim codes.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Need some help please, itunes 7.1 and Windows Vista
Hello,
I've got a bit of a problem here with itunes and my ipod nano.
Basically I'm using Windows Vista Ultimate 32bit and when I connect my ipod to my PC the found new hardware wizard pops up but can never find the ipod nano.
In disk management the ipod is showing up but in itunes its not.
Could anyone advise on this please?A little update about this issue and it's good news. I've managed to get the ipod show up in disk management with the ipods name and when I open itunes and plug the ipod in, it pops up in itunes.
Heres it is just like it should be, a result!
http://img291.imageshack.us/img291/1293/untitled1ln0.jpg
Basically what I did to fix this issue in Windows Vista was the following
1.Click Start type run in the search bar and then msconfig.
2.Click on the Services tab and "hide all Microsoft Services".
3.Click Disable All for all the non Microsoft services that are showing.
4.Click OK
5.Click Restart.
6.When your desk top loads up click OK for the msconfig menu which pops up.
7.Open itunes and connect your ipod.
It should now show it does for me.
Now follow step 1 again and load all services as your pc would start normally again and reboot, again your ipod should show up now as it should.
I hope that's useful if anyone else experiences the same. -
Hello! I need some help please.
Hi there! My problem is the following. As i want to turn the internet sharing on combined with a security password a little window comes up and says : system preferences wants to make changes, put your password in order to do so. The thing is that i have absolutely no idea which password is that i have to put! So now my system preferences is locked! If i want to make changes i have to unlock it! Please, it would be great if someone helped!
Sorry for my english btw.No, it's quite easy to do. If you're running Lion or Mountain Lion, that is. You don't mention which version of OS X you're running. If using Lion or Mountain Lion, simply reboot and hold down the Command and R keys at startup. This will take you to your Recovery Partition.
From the Utilities menu, select Terminal and type
resetpassword
A small app will open allowing you to reset the password for any user that you choose. Type in the password twice and remember to give yourself a 'hint'.
You need an admin password to do just about anything. Maybe write it down somewhere so you won't forget it.
Clinton -
Hello everyone,
I have a line (a little white line) down the screen on my satellite laptop. It appear a little while after installing 2gs of memory. Could someone explain to me what could have cause it and if it is covered by my extended warrenty. I also wants to know if it is covered by the warrenty if Toshiba allows me to take it to a local repair shop that is not their as i am in the caribbean and none of their repair centres are close to my island.
Thank you in advance.What is the complete model number of the laptop and the complete part number of the new ram?
As for the warranty issues, you'll need to contact Toshiba Warranty Support about that. This is User's helping other Users and none of us would have that information.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time. -
Ok, I have my logic pro studio, version 8.0.2. and I have a duet pedal. Now, I have my piano hooked up through the duet pedal, and then going via fire wire to my mac for recording. I opened up Logic Pro, and selected empty Midi Project to record.. it shows a piano in Logic, and says "record ready" yet when i hit record I get no sound, doesn't record anything and this freaking 1000 page book has me lost on what to do!
I'm just trying to record midi so that I can convert and do the Notation Music to turn my music into sheet music. Can someone help me please? On another note, I did save my project so that it was saved....I figured out how to get the midi on there.. but now, I need to figure out how to get sound
-
New and needing some help PLEASE
I just bought a iPod Nano. I went to install the itunes but it wil not let me because I don't have windows 2000 or vista or whatever it takes. I have Windows ME. Is there any way to still download itunes for windows me?? Or if not what should I do?? Any help would be greatly appreciate!!!!
Here are some of the programs taht claim Windows ME comatability for you to check to see if any suit you.
Yamipod
http://www.yamipod.com/main/modules/home/
Foola
http://www.floola.com/modules/wiwimod/index.php?page=WiwiHome
anapod
http://www.redchairsoftware.com/anapod/
Maybe you are looking for
-
Can anyone please help? Every time I start up my imac OSX 10.6 desktop my Aperture 3 programme opens up without being requested. Is it possible to stop this happening and only allow Aperture to open by using the desktop icon? Thank you for any assist
-
Assassin's Creed on MacBook Pro 13 inch
I just bought new MacBook Pro 13 inch and i want to play Assassin's Creed II on it. In appstore i read, that this game is not compatible with my computer, but many peoples say that is playble. Do you know anyting about it, because I don't want pay fo
-
Hi, I ahve a WDA application, with a view. This view has 4 fields, Order Type (AUART), Sales Org (VKORG), Distribution Channel and Division. On click of the button I would like to validate the data enetered by the user in these fields. I have created
-
Request:UEFI / GOP Vbios-MSI R7850 twin Frozr-2GD5/OC Radeon HD 7850
I would like to request a UEFI / GOP Vbios for MSI R7850 Twin Frozr-2GD5/OC Radeon HD 7850 if one is available, my current vbios does not support UEFI / GOP. Thanks. serial number:602-v273-050B1303096145 Gpu-z: h**p://gpuz.techpowerup.com/13/10/29/9
-
I keep gettinbg an event log error CDROM has a bad block, Error 7 and error 51 paging error. Windows 7 freezes up. Is my cd bad? Is there anyway to restore the data on it.?