Heres a new one !make path from selection adobe CS4 problems

Hello Ive had CS4 for about a week and i Tried make a path from selection with alliptical tool and it comes out all wonky only rectangle tool is true to the its shape anything else is bugged. Ive deleted the settings folder on start up,reinstalled , tried all tolerence levels, reinstalled video card driver(nvidia 7600 gt) and turned on and off gl. Has anyone experienced this, can anyome help me?
cheers

bochansan wrote:
That was the first thing I checked . Can someone else help? it would be a pity to give up so quick .Does uninstalling and and using a cleaner help? if so what does one recommend?
OK. That method is not very good anyway.
Make the path using the Ellipse tool set to Paths In the Options Bar.

Similar Messages

Tolerance dialogue missing on "make work path from selection"

I am trying to convert a 1-color drawing to a path so I can put it into Illustrator. I use the magic wand to select the edges and get a nice tight fit. But when I select the "Make work path from selection" button, I get a sloppy fit. I've looked this up, and supposedly I should get a dialogue box asking me to state the tolerance. I have never seen that box - I've tried it and had colleagues come try it. My version 13.1.2 x64. Seems like a bug to me, but maybe I'm missing something. Is there another way to do this? Thank.s

R_Kelly wrote:
If you press the Alt/Option key while pressing the Make work path from selection button, then you'll get the Tolerance dialog.
Other ways are to right click inside the selection and choose Make Work Path or use the flyout menu from the Paths panel and choose Make Work Path.
Hah! I didn't know that RK
[EDIT] As an aside to the above information, having had a play with it, I have realised how poorly the 'Make work path from selection' feature works in Photoshop. It has always worried me that distibution of points that result from using that feature on a Shift drag eliptical marquee circle, appear less than optimal, but I have just lived with that because it is quick and convenient. But having just looked again, zooming right in and activating the point handles, the curve is just plain horrible!
Me thinks I shall take the time to do it properly in future, by using the Shape tool.
It also amazed me how many points were used when setting tolerance to the minimum of .5
Anyway... I am not getting my work done here, so time to earn a living

Can't make playlists from selections in iTunes 8

Can't click on the selections I want to make into playlists and either choose that option from the pull down menu or use the key command. As others are saying, iTunes 8 is quite buggy.

I am choosing a song or songs from the library and then trying to use the key command (shift command N) to make a playlist from them. However, although I've been doing this for years, I can't do it in iTunes 8. Neither can I choose the song or songs and then make a playlist out of them using the pull down File menu item "Make Playlist from Selection." That menu item is darkened, not available.
Yes, I can still make a new folder, manually name it, then drag and drop the songs into it.

My audiobooks keep stopping at about 8mins. Only the older audiobooks in the audiobook section. Not the newer ones if played from Purchased or Recently Added sections. What can I do?

My audiobooks keep stopping at about 8mins. Only the older audiobooks in the audiobook section. Not the newer ones if played from Purchased or Recently Added sections. What can I do? Thank you.

have you ever copied those audio books in another location and played in your computer? May be the audio book file is corrupted. give it a try.
have a nice day.

Im changing my PC to a new one, how can I transfer Adobe Creative Suit from my old PC to my new PC?

Im changing my PC to a new one, how can I transfer Adobe Creative Suit from my old PC to my new PC? I bought it online, so the serial is on my profile.

You need to install the software on the new machine the same way you installed it on the old machine. You are allowed to have two activated installations if you would like to retain the original installation as a backup. If not, then you should deactivate it (Help -> Deactivate in any program),
If you have a download link in your account online you can use that or you can download thru the page linked below...
Download and Installation Help -
https://helpx.adobe.com/download-install.html

Help. Photoshop CC14 on Mac 5k (2014) running Yosemite 10.10.1. Photoshop stops responding when I'm opening files, saving files or creating new ones. Is anyone suffering the same problem? Does anyone have an answer?

Help. Photoshop CC14 on Mac 5k (2014) running Yosemite 10.10.1. Photoshop stops responding when I'm opening files, saving files or creating new ones. Is anyone suffering the same problem? Does anyone have an answer?

First, go install the MacOS 10.10 updates - you should be on 10.10.2.
I haven't heard of Photoshop not responding during opens and saves. Does it stop responding while the open/save dialogs are visible, or while Photoshop is actually reading or writing files?
10.10.1 did fix a crash in the open/save dialogs, but 10.10.2 still has some odd issues (mostly program errors coming from the OS code) in the open/save dialogs.

TS3672 Hi need help, when i am trying to compose any new sms, there is a old sms appearing by default on my phone, it so happens that i have to delete that sms and compose a new one, how can i over come this problem

Hi need help, when i am trying to compose any new sms, there is an old sms appearing by default on my phone, it so happens that i have to delete that sms and compose a new one, how can i over come this problem.
Regds.
Nagaraj

On my iphone, when I get into Messages, I see a list of message thread names and at the top right is an icon with a square and pencil coming out of it. If I tap it, I can begin composing a new message with having to deal with any others.
If on your screen you see one or more message "bubbles", then press the "Messages" button at the upper left to go back to the home page for messages. There you can tap the compose icon.

Touch ID on my ip5s had broken. I added my fingerprints before then I deleted them and add new one. How I can fix that problem? P/s : Fail immediately when I click on Add fingerprints

Touch ID on my ip5s had broken. I added my fingerprints before then I deleted them and add new one. How I can fix that problem? P/s : Fail immediately when I click on Add fingerprints.

problem is "Failed. Sorry, the operation was not succesfull. ... " and now i can't use touch ID in my phone

My computer says it's been synced with another device besides my own, and it wont let me do anything in itunes until I either start up the device as a new one, or restore from another back up, and i dont know what to do!

I got the new ipad several weeks ago, and since i had the ipad 2 before it, i transfered the data from it to my computer and gave the ipad 2 (techinally new since it had nothing on it) to a family member. Now, when I go to itunes on my computer with the new ipad, it says that the computer has already been synced with another device, and my only two options are to set the ipad up as a new one or to restore from a backup (my up-to-date backup for the new ipad does not come up on itune's list of backups that went to my computer). So now because of this, there is no way i can put anything from my computer to the ipad, or even look at it through Itunes on the computer! Is there any other option for me?! I need help now!!

I found this article some time ago when I was trying to help someone else in this same situation. This is a copy and paste from the website. The website is provided below for you to read before you try this.
Plug your phone into iTunes
Click setup as a new device
Immediately unplug your phone from the computer
Give it about 30 seconds and iTunes will give a message (I don’t remember the specific, but regarding you unplugging the device and it not completing)
Plug your phone back in
Viola! no restore occurred and you can access everything again
This computer has previously synced with an iPhone or another iOS device.

Does Apple accept to replace my rMBP with new one? (bought from unauthorized reseller)

I bought a rMBP 13'' from and unauthorized reseller 3 days ago in UAE but the device part number is LL/A.
After testing many things and talking to Apple guy we are almost sure that The rMBP has hardware (wifi) problem.
Now my question is can I ask apple to replace my rMBP by a new one? Is this contain their terms? if so please give me links from apple website that I can ask them for a replace base on that.
Thanks in advance

You have 14 days from the date of purchase to return or exchange w/no questions asked. Doesn't matter where you purchased from as long as you have a legit receipt.

Can I make path from images folder to swf folder?

I am using Flash CS3 and Actionscript 2.0.
I want to make a photo.jpg that is in my images folder load into a swf that is in a swf folder. It works fine when I have the photo.jpg in the same folder as the swf. But it does not work when I have the photo.jpg in a different folder.
What must I do to the AS2 to make this happen?
I really do apprecaite an anwer to resolve this issue.
Here is the path:
mcLoader.loadClip("swf/images/photo1.jpg",mcHolder);

When you load those swf's into the main swf, they now live where it lives, and because the main swf is loaded into the html page, that's where it lives (whether it is in that folder in real life or not). The files are essentially working someplace different from where they live.
You don't have to move anything, but you do have to target everything properly, and for swf's that get placed in an html-based home, that html-based home defines root of the relative path the swf's need to use.
I believe you have an html that embeds an swf file in the same folder, and that swf file loads swf files from a subfolder, let's say it's called swfFolder. And I believe the images also lie in a parallel folder to the swf's subfolder. Then if those subfolder swf's load images from that images folder, call it imagesFolder,, then the path in those swf's to target the images would change from ../imagesFolder/ to imagesFolder/ because when they are loaded into the main swf which is loaded into the html page's folder, they essentially exist in the html page's folder

Create clipping path from selection

I'm driving crazy!
Why this script does not work?
tell application "Adobe Photoshop CS3"
tell current document
make work path selection
make clipping path (path item 1) flatness 0.5
end tell
end tell
The work path is created with no prob.
But the clipping one returns this error:
"The command »Define« is not avalaible"
What's wrong?

I've found the solution!
You have to name the work path to memorize it in order to be able to create the clipping path.
This is the code:
tell application "Adobe Photoshop CS3"
tell current document
make work path selection
set name of path item 1 to "Détourage"
make clipping path path item "Détourage" flatness 0.5
end tell
end tell

Action with new file with size from selection

Hello,
I try to record an action that takes a copy of the current image and creates a new file with the same dimensions. The action I record always has the file size of the new image hardcoded in it. I tried to set Preset to Clipboard, but this is not recorded in the action. This is with CS3.
How can I create a new file that takes the current image size into account?
Thanks for your help,
Daniel

You can record the menu 'Image-Duplicate' to make a copy of the whole image without recording the size. If the doc only has one layer you can also record the flyout menu of the layer's panel to duplicate the layer to a new document. The size will not be recorded.

Can any tell me how to make Collage from selected images

Hi
I need to make a Collage of selected Images. Can anybody tell me how to proceed or point me a finger in the right direction. If there is an example then it would be great.
Thanks in advance
praveena

One way you can do this is to override Panel, and set up clips, like this (mind you this is a very crude example. If you used this method, you'd want to set up loops and calculations to set the Polygon dimensions:
private class MySubPanel extends Panel {
    private Image[] images;
    private MySubPanel(Image[] _images) {
      images = _images;
    public void paint(Graphics g) {
// Just for a test, let's just assume only two Images are past in.
      int[]   xPnts = new int[] { 0,30,50,70,80, 95,75,60,45,30,15, 0},
              yPnts = new int[] {20,35,15,35,20,110,75,95,70,85,55,30};
      Polygon p     = new Polygon(xPnts, yPnts, 12);
      g.setColor(new Color(50,150,20));
      g.setClip(p);
      g.drawImage(images[0], 0, 0, this);
      xPnts = new int[] { 0,15,30,45,60,75, 95, 80, 70, 50, 30, 0};
      yPnts = new int[] {30,55,85,70,95,75,220,130,145,135,155,130};
      p     = new Polygon(xPnts, yPnts, 12);
      g.setColor(new Color(50,150,20));
      g.setClip(p);
      g.drawImage(images[1], 0, 0, this);

HI I use my IPAD new one to print from, well my IPAD prompt me load paper and the prompt wont go a

I have the prompt on my my new generation ipad from officejet4620 series 1D9F2B that does not let me cancel or continue ,i already tried to reboot my ipad,i did the same to the printer. WHAT SHOULD I DO NEXT PLEASE HELP THANKS

HI vp11,
Are you trying to print a photo, email, or webpage ?
What exactly does the message say ?
Here is a link to a support page that will help you with troubleshooting your AirPrint issue.
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

Heres a new one !make path from selection adobe CS4 problems

Similar Messages

Maybe you are looking for