Het gaat over Adobe Premiere Elements 10

Ik gebruik Windows 8.1. De PC heeft een intel Core i5-4460 processor en een NVIDIA GeForce GT720 DirextX grafische kaart.
Als ik de binnengehaalde scenes naar de tijdlijn sleep krijg ik geen beeld in het voorvertoningschern. Ook niet als ik ze laat renderen door op enter te drukken. Wel loopt de rode lijn met het puntje erop. Ook hoor ik het geluid dat bij de scenes hoort. Als ik dubbelklik in een van de opgehaalde scenes krijg ik ook een leeg voorvertonings sche@rm waar wel weer het geluid loopt.Premiere ElementsNewsgroup_User

johanderuijter
For your convenience, the following is a copy/paste of the Premiere Elements 10/NVIDIA GeForce Announcement
at the top of this forum
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you
are experiencing Premiere Elements 10 display and/or unexplained program behavior, then your first line of
troubleshooting needs to be rolling back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained
workflow glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce
video card. If this applies to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card
driver as far as is necessary to get rid of the problems. The typical driver roll back has gone back as far as
March – July 2013 in order to get a working Premiere Elements 10. Neither NVIDIA nor Adobe has taken any
corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the
driver roll back can be found http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
ATR

Similar Messages

I have recently had problems in getting my Adobe Premiere Elements 10 to run. One of the gentlemen was able to take over control of my computer, and got it working for me, however since that time the program will sometimes open but most times it just free

I have recently had problems in getting my Adobe Premiere Elements 10 to run. One of the gentlemen was able to take over control of my computer, and got it working for me, however since that time the program will sometimes open but most times it just freezes the computer and I have to shut it down and re open without any success with opening the elements program.
Can you help

Sosure
What computer operating system is your Premiere Elements 10 running on?
What video card/graphics card does your computer use? NVIDIA GeForce? If so, please read the Announcement about the Premiere Elements 10 NVIDIA GeForce issue which is found at the top of this web site. Does that apply to you? The explanation for the situation and the fix (roll back of the driver version) are all included in that Announcement.
We need to rule in or out this factor at the onset before we get to other questions
a. non NIVIDIA video card/graphics card driver
b. project preset and properties of source media
c. computer details
More later.
We will be watching for your reply.
Thank you.
ATR

Adobe Premiere Elements 9 has encountered a problem and needs to close.

Adobe Premiere Elements 9 has encountered a problem and needs to close. Asked to be debugged no response an then the program don not respond.
If i Run an old project direct from the file PE 9 it works and then go to a new project it works but from the start up it just closes down.
Bridge is also starting to do it

From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
•What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 12 with the 12.0.1 update).
•What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac"
•Has this ever worked before? If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
•Are you using an account with Administrator Privileges?
Run as Administrator http://forums.adobe.com/thread/969395 (Encore + "All" Premiere)
•Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
•What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
•If you are getting error message(s), what is the full text of the error message(s)?
•What were you doing when the problem occurred?
•What other software are you running?
•Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
And some other questions...
•What are you editing, and does your video have a red line over it BEFORE you do any work?
•Which version of Quicktime do you have installed?
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

Can't open Adobe Premiere Elements 9

I've had some problems with Adobe Premiere Elements 9 recently, and right now I'm not able to use it. I'm not sure what the problem is really or how to fix it so I'll just write down what has happened here and hopefully someone knows what to do.
A week or so ago my laptop started to crash repeatedly, but fortunately that was solved. But then I noticed that when I opened Adobe Premiere Elements, that's when it crashed and only then. It stopped crashing altogether except for when I opened this program (if it is of any importance I also tried opening Windows Movie Maker to edit there in the meantime but the same thing happened there, which seems strange and kinda random to me). I decided to get an antivirus software and install that and see if that took care of it, which I have now done. That didn't exactly take care of it though. The laptop did stop crashing when opening the Adobe software, but nothing happens once it's opened. The tabs on the top right are there but the whole program is just grey (where you would normally have the timeline on the bottom, video to the left, and the files etc. to the right) and nothing else comes up. I then tried to uninstall Adobe Premiere Elements 9 from my laptop altogether and then re-install it with the CD I still had from purchasing the laptop a couple of years ago. But after re-installing there is no change. Just a grey screen once again, except for the tabs and all that on the top. Now I'm not sure what else to try. It's frustrating as I need this program to work right about now. Does anyone know what to do? Thanks.

From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
•What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 12 with the 12.0.1 update).
•What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac"
•Has this ever worked before? If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
•Are you using an account with Administrator Privileges?
Run as Administrator http://forums.adobe.com/thread/969395 (Encore + "All" Premiere)
•Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
•What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
•If you are getting error message(s), what is the full text of the error message(s)?
•What were you doing when the problem occurred?
•What other software are you running?
•Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
And some other questions...
•What are you editing, and does your video have a red line over it BEFORE you do any work?
•Which version of Quicktime do you have installed?
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
Some of the below is for Premiere Pro, but the idea is the same for Premiere Elements
Dual video problems - Do you have dual graphics adapters?
Go to the Windows Control Panel and select Hardware and Sound and then select Device Manager... In Device manager you click the + sign to the left of Display Adapters... and see if 2 are listed
IF YES, read below
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2
-HP Fingerprint/Password conflict http://forums.adobe.com/thread/911575

Sorry, a serious error has occured that requires Adobe Premiere elements to shut down. We wil attempt to save your current project. This error occures when Im adding a .mov movie.

Hello everybody
I have a new laptop and when I want to add a .mov movie to Adobe premiere elements, this error occures. Im trying to solve this problem now for days but I dont know how to continue. Im working with Windows XP, Version 2002, T2250, 0.99 RAM and an old Premiere elements 2004 version.
On my old computer I was able to add this same .mov movies, but not on the new one.
I also tried to convert this .mov movies, but the quality was to bad...
Does anybody know this problem? Im appreciating every little advice and help.
Thanks a lot
Sabine

Sabine
Sorry for all the delays getting your thread moving forward. I suspect that it got lost in the daily thread traffic and Adobe's major updating of the forums.
Do your issues still exist. If they are the same as when you posted on May 8th, then
1. When you used HandBrake for the converslion of your .mov file, did you leave the Container = Mp4. And under Video Tab, did you set the Videc Codec = H.264 (x264)? All you needed to do at that point was dot the Constant for the frame rate and designate a frame rate and select the Start button and wait for the Queue Finished message in the progress bar at the bottom left of the HandBrake workspace.
2. What model iPhone is the video coming from? Your iPhone is probably giving you HD video (probably 1080p). So increasing the computer's installed RAM from 2.00 to 4 GB would be expected to help the overall workflow. Only if you have a 64 bit computer operating system, 8 GB installed would be even better. The 4 GB installed RAM is the maximum supported by a 32 bit computer operating system.
3. Specially for
The movie is stopping and jumping.
When you are playing back the Timeline content, are you looking at the "rendered Timeline"? Is there an red line over the content during that playback? If so, press the Enter key and wait for the render process to complete. This rendering process gives you the best possible preview of what you are seeing. The red line could be due to your editing the content, or it could be due to an incorrect selection of project settings. If you supply information about your video properties, we can suggest the best possible project settings. I do not recall seeing that you mentioned what version of Premiere Elements that you are using 1, 2, 3, 4 or other?
Please review the above and then let me know what supplemental information and/or clarification would help.
Thank you.
ATR

Adobe Premiere Elements 11 Playback Stops

I'm using Adobe Premiere Elements 11 on a new HP workstation. I've created several projects without problems. I've recently had some lost media files and re-installed Premiere Elements. Now when I click play, it plays for a short time and then stops. I click again and it plays for a short time and stops again. Any suggestions?

Mary
Thanks for the replies.
Typically, I think about Scratch Disks as storage places to where the project automatically sends its files generated as part of one of its activities - thinking
preview files, conformed audio, autosaves, encoded files. An Adobe document describes them as per the following link.
Adobe Premiere Elements 11 * Working with scratch disks
You do not want your computer bogged down by pile ups of these files from project to project.
With your next projects, I would look at beforehand pointing all the Scratch Disks (Edit Menu/Preferences/Scratch Disks) to that E drive with the 1.8 TB space (assumed
most of it free).
With those clips with the .mod file extension, right click the file name, select Rename from the drop down list.
When you select Rename, typically the name part of the file, not the file extension, is highlighted for the type in.
file name.mod. In that case, with your mouse cursor, click between the . and the mod and drag the mouse curser
to the right over the mod. Then type mpeg or .mpg.
A good starting place to explore for best settings for your described source might be
Project Preset set manually to
NTSC
DV Standard
or you might want to experiment with
NTSC
FLIP
Flip Mino and Ultra 29_97p
Please check out the how to for manual setting of the project preset. That is found at bottom of the following link
ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
We will be watching for your progress. Please let us know if you are OK with the above information.
Thank you.
ATR

Adobe Premiere Elements 10 not working on both my Computer

I just bought Adobe Premiere Elements 10 to use with my Sony Handycam HDR-XR160 but it just dont work
I first try to install on my PC: Intel Quad Q6600 with 8 Gig of Ram and a 500 Go WD Black Edition and a GeForce 9800 GT with 1 Gig of Video Memory .... really jerky video editing interface and the play back is really bad a lot of pixellization all over and also really realy jerky
then I tried with My Mac Pro 2008 2XQuad Core Xeon 10 Gig of Ram 2 x 1TB WD Black Edition (Scratch Folder on second HD) and a ATI Radeon HD 3870 same problem but now the video play back just stop every 5 seconde it s also hard just to drag the video in the time line at the botom of the screen
This is computer I use for My Recording Studio and it's working like a DREAM. I did the same manipulation with other program like IMovie and so on with NO PROBLEM AT ALL .... and the interface was responsive unlike Premiere
I bought your programe thinking I was going for a upgrade from what I was using before and now I can't take it back cause the box is open so please tell me you have a fix or someting cause at the moment ... i'm really not to impress
Thanks for the help

Hello Steve
Thanks for a your help
I still have the same problem I did change the recording from 60p to 60i but the video are still jerky , I know i'm probably the one who's got the problems but I just don't see it !!!
This is the setting I have on my Camera:       Image Quality/Size
                                                                  Image Quality = HD
                                                                  Frame Rate = 60i
                                                                  Recording mode = High Quality FH
                                                                  x.v.Color = On
                                                                 Connection
                                                                 TV Type = 16:9
                                                                 Component = 1080p/480i
                                                                 HDMI Resolution = Auto
                                                                 CTRL FOR HDMI = On
From thoes Info can you tell me what's the Best Preset in Premiere or if someone is using premiere with a Sony Handycam HDR-XR160 can you tell me your exact settings for both the Cam and Premiere
Thanks

Adobe premiere elements 10 install error on mac

I have tried to install the Premiere elements 10 on mac and fails every time with the following error
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 8 error(s), 7 warning(s)
WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Camera Profiles Installer_6.4_AdobeCameraRawProfile6.0All 6.4.0.0 will be uninstalled now.
WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Camera Profiles Installer_6.4_AdobeCameraRawProfile6.0All 6.4.0.0 will be uninstalled now.
----------- Payload: {68FE2517-2E45-4B03-8241-D0634F43878B} Smartsound1 1.0.0.0 -----------
ERROR: DW006: Apple Package failed to install successfully.
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Smartsound3: Install failed
ERROR: DW050: - Photoshop Camera Raw for Elements 10: Install failed
ERROR: DW050: - Smartsound1: Install failed
ERROR: DW050: - Adobe Premiere Elements 10: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Premiere Elements 10_LangPacken_US: Install failed
ERROR: DW050: - Smartsound2: Install failed
I have downloaded and installed the Adobe support Advisor and it reported the following ,.
Trying to select the link in the report above takes me to the following ..
http://helpx.adobe.com/creative-suite/kb/installation-error-dw050-dw020-cs5.html
Which reports an error in a Windows environment ? and advices we ignore this error. However the installation does not go any further.. it quits and does not ask for the other disks to be installed.
Its been several times I have already tried to install and in between every install a restart of my mac pro
Any help would be appreciated.
Thanks
Murali Vallath

You will find best advice over on the video forum. Most of us here are photographers.
Click on the link below and copy and paste your question again. Good luck.
Video questions: Click here for Premiere Elements Forum

Yosemite upgrade causing issues with Adobe Premiere Elements 10

Hi,
Over the last weekend I upgraded my mid-2010 iMac to Yosemite from Snow Leopard and it seems to have caused an error with Adobe Premiere Elements 10.
Prior to upgrading I was working on a project without issue. Now, when I try to open it I get an error "The project is not compatible with current version of Premiere Elements".
I have tried other projects and some open without issue whilst others also present the same error. The difference between the projects appears to be whether a DVD menu has been selected. If the project has one - it fails to open.
It seems strange that the OS would affect software in this way but that is all that has been changed.
If someone can shed some light on this it would be greatly appreciated.
Thanks

Hi,
Over the last weekend I upgraded my mid-2010 iMac to Yosemite from Snow Leopard and it seems to have caused an error with Adobe Premiere Elements 10.
Prior to upgrading I was working on a project without issue. Now, when I try to open it I get an error "The project is not compatible with current version of Premiere Elements".
I have tried other projects and some open without issue whilst others also present the same error. The difference between the projects appears to be whether a DVD menu has been selected. If the project has one - it fails to open.
It seems strange that the OS would affect software in this way but that is all that has been changed.
If someone can shed some light on this it would be greatly appreciated.
Thanks

Adobe Premiere Elements 7 With Worthless Error Messages.

I have been a programmer since 1984, and if I saw a programmer in my team wrote these worthless error messages, I would go into my office and kill myself.
I Googled them, and I found them discussed; but the responses were of no use to me, mostly.
1. The error message I got that brought me to the edge of a cliff is: "Sorry, a serious error has occurred that require Adobe Premiere Elements to shutdown. We will attempt to save your current project."
Then it crashed.
When I was taking Operating Systems in my computer science class, a crash means you will get no more than 60 (out of 100). At IBM, a crash is always a SEVerity 1 issue. There is no way around it. Crash means the program is worthless.
I Googled it, and Adobe suggested it could be some drivers using virtual audio. I uninstalled everything I could find, and this problem is not going away. I looked at the sound device configuration, and it's using physical audio, not virtual audio.
I uninstalled Premiere Elements 7 five times and reinstalled them. They still failed. Finally, I reinstalled it at a different location, and it managed to "Found default catalog. Trying to open the default catalog." Then crashed.
If I wanted to use the default catalog, I would have said so. If I knew where they are, I would have set them on fire.
Anyway, I have a project due this afternoon, and I am stuck with these worthless Adobe Premiere Elements 7 error messages. No wonder Steve Jobs banned Adobe Flash. They are pretty worthless.
Sorry I am so upset, because none of you need to read my frustration; but I am up to my neck with Adobe. Once I get my project done, and I am switching to SONY Vegas.
But, for now, would someone tell me how to get rid of these problems so I can get the video edited? Thank you.

I noticed these errors were reported years ago, and Adobe has done NOTHING to improve it.
Go back to my little list of how problems, crashes and errors sort out. That was how it was way back with Premiere programs, and how it still sorts out.
Even the patch for PrE 8 was mainly to get it functioning with nVidia and ATI graphics cards. Yes, those "fixes" probably straddle the line between Bugs and system, with a nod towards Bugs. I know that Adobe takes their Bugs very seriously, and work overtime trying to find fixes for those, that do exist. Though it took a bit of time, as they gathered info, still Adobe had a patch, and that is rare for PrElements, due to the normal lifespan of that program.
I provide some of the same answers today, that I did years ago, to fix the problems. In nearly every case, things sort out per that list. As "system" is both #1 and is also by far the largest segment of causes, that is where I begin looking. With PC's, there are myriad configurations, and most are not suited for video editing. Too many load up their e-machine and expect to edit HD material. Obviously, that is not the case here, but there could still be equipment incompatibilities, or just some tweaking needed. I see similar in the PrPro forum, as the Mac-users put the program on their MacBook Pros, with one tiny HDD, and a very weak CPU, and things go horribly wrong. If PrE was ported for the Mac, we'd have the same issues here. Usually, my first question will be about the I/O sub-system, i.e. the HDD's, their size, speed, free space, controller type and how they are allocated. Video editing is highly I/O intensive, and most computers are not even close to being able to efficiently handle it. I recommend a minimum of 3x SATA, physical HDD's, and suggest that they be setup to spread the I/O workload over all three. Some manage with a 2x I/O, but that is below MY minimum, and is the real minimum from Adobe. A single HDD I/O is just going to cause bottlenecks, and there is no way around that.
Once, it was more the domain of the PC, that one had system issues, as Mac's were so limited and controlled. Now, as they have gained the ability to expand beyond the absolute control of Apple, those users are finding out that systems DO matter.
Notice #2 - Assets. Not all AV material is meant to be edited. Some, like AVCHD (a consumer format) will require a pro-level computer, just to get smooth playback! The second most common issue is trying to edit material that has something like the Xvid, or DivX CODEC.
Number 3 - Project, is very important too. One must match their Project Preset to their source footage. If not, then there will be problems. The failure to do this match is one of the biggest causes of issues, though usually not crashes, or hangs.
Number 4 - OE, is when a user decides to push a button, and expects something else to happen, and often because that's how it worked in another program. Many argue with me that #2 and #3 are OE too, but I am much more lenient, than they are.
Then, there ARE the Bugs. PrPro CS4 had a bunch. CS4.1 fixed a few, but broke some other things. It was not until CS4.2, that things got corrected, mostly, with that version. Then, CS5 hit, and seems quite good, but has a few Bugs too. Some were left over from CS4. A new update for CS5 is coming, and soon. Will it also fix those lingering Bugs? Only time will tell. Will it be a perfect program? Doubtful, but I'll bet that it'll be a "better" program.
Think back to when you started programming. You were writing apps. for the majority of the install-base. However, what happened if the user had Extended Memory? What happened if they had Expanded Memory? What happened if they had both, and a software manager to handle those? Most still had 640KB. By that time, I had 2GB, though my MoBo could only handle 1GB with the managers. How could you write for me? I was 1:1000000, or maybe even less. I had to do my programming on the fly, and often had boot discs for different programs. It's not that much different now, except that I would not be such a rarity any more, but hardly mainstream.
I'll bet that we can sort much out, by tackling the "Big 3," and then working down, if necessary.
I like doing test Projects, keeping things simple, and testing as we make them more complex. That helps isolate the issues in most cases. In another thread, the poor user says that all Project Presets, all formats and all Export setting yield issues. My first thought is to isolate on one Project Preset, one set of Assets, and see if it's a system issue.
Sometimes it's easy, and that is good, 'cause the user gets to editing and not fritzing so much. Just nailed one in Encore, but the poster gave me all the data necessary, and my memory did not fail me (maybe it was not "wine-thirty yet?). One post, and one correct answer. Life is good. Sometimes, it takes days, and many posts, to narrow things down. In but a few, there is an answer. In those (like the PGC error in Encore) one never does really solve the issue, and the only hope is to get the OP to start over, do everything by the book, and hope for the best, this time around.
Good luck, and be assured - I do feel your pain. If I have not had one of THOSE error messages, believe me, I have read of them too many times.
Hunt

Adobe premiere elements 10.0 uses more than 100% cpu on macbook pro lion osx 10.7.3

Hello All,
We have a macbook pro 17" 2.66Ghz Core 2 Duo, 4GB DDR3 running lion osx 10.7.3.
When trying to run a video in adobe premiere elements 10.0, the video really lags. I checked the activity monitor and the cpu usage for the elements app process goes above 100%. Sometimes even 170%.
No wonder why its struggling to render the video.
Anyone noticed this issue too?
All suggestions welcome.
regards
Ankit

Hello OgelThorpe,
Thank you for the suggestion. I will try that soon. My macbook meets well over the hardware requirements for that package. Also only the cpu usage is high, i have 4GB ram and only 500-700 MB of that gets used by adobe premiere.
I have have run the hardware test in a loop and it passed everytime, so i dont doubt the hardware.
regards
Ankit

Adobe Premiere Elements 10 Error 1 or [..\..\Src\DirectoryRegistery.cpp-283.

I installed Adobe Premiere Elements 10. When I double click on the shortcut icon , I get configuration error 1 which tells me to uninstall/reinstall and then contact Adobe support if it happens again. Uninstalling/reinstalling did not resolve problem so I contacted Adobe support. First time spent about 45 minutes on hold while the person consulted with other colegues and was then disconnected. After waiting about 1.5 hours for call back, I recalled. After about 30 minutes on hold was told that I should call a different number and pay $39 and I could talk to someone who might be able to help me but that this support line did not support this type of problem. Went to online support. Was told to add a new password protected user account, uninstall/reinstall and try to open program using new user account. No joy. Present status : If I double click on shortcut icon, get configuration error 1. If I rignt click and try to 'run as current user get 'debug error [..\..\Src\DirectoryRegistery.cpp-283. If I 'run as the password protected user account get configuration error 1. Note that during the first call, I was sent an email with a 'case number' and a link to check status but the case number has never showed up on the adobe website. Questions:
1. Any suggestions to resolve problem?
2. If I pay the $39, is it likely that I will get the problem resolved or simply get the same run around? I have now uninstalled/reinstalled/restarted at least 6 times and there have really been no other suggestions from Adobe.
3. Suggestions for alternative video editing software if I can't ever get Adobe to boot up. Thanks for your support.

You will find best advice over on the video forum. Most of us here are photographers.
Click on the link below and copy and paste your question again. Good luck.
Video questions: Click here for Premiere Elements Forum

Adobe Premiere Elements 10 - missing and relinking files

I have adobe premiere elements 10 and I am hoping someone can please help me with an issue I am having with unlinked files.
The problem: somehow the files in adobe premiere elements organizer have lost the link w/ the originals. Whether I manually search or allow premiere elements to search, I am unable to relink the files. I thought I had the original file structure from the camera (Canon Vixia; file structure AVCHD - BDMV - STREAM - then there are the files). However all that is in the original file structure are the .xmp files (not the .MTS files like there normally are) I will be honest and say that the computer files did get rather disorganized w/ multiple copies of things (I was having issues w/ converting files w/ the mac, and I used a duplicate finder to find duplicates about a year ago and deleted what I thought were multiple copies of things). Then left the project alone, and now trying to reorganize the videos and make a DVD.
The goal: relink the files
The importance: Everything links up except for about 4-5 months worth of videos. Which happen to be the videos of my 2nd child's birth (her first moments in the hospital, first bath, first Christmas, first everything!) So this is extremely important to me that I find the files and relink them.
What I've done: Manually searched the mac, the backup drive and the cloud backup. No luck. I also had adobe premiere elements search - no luck. I have used the mac search function looking for key words and later the file name (which shows up in Adobe premiere elements organizer - but it has the little yellow question mark prompting me to relink the files - then I can't find the original to link it to).
Fingers are crossed: that someone can tell me there is something I can do with these .xmp files to relink them? Anything that can be done at all? The premiere elements organizer even shows a picture of what the video is - not just a blank gray screen - where is it pulling these images from if they don't exist on the computer somehow?
I've learned my lesson on keeping original files separate, but please help me save and preserve my daughter's precious first memories!
Thanks so much.

Thank you so much for your reply.
-When I right click the thumbnail in Elements Organizer & go to "show properties", I see a picture of a folder and the file structure where it should be found (Macintosh HD/Users/ourfirstlastname/Videos/09 30/ 12/ ). When I follow that file structure on our macintosh HD, there is no "videos" folder in the hard drive. As a side note, the file name in Elements is 00029.MTS so it is trying to find the MTS file.
-Yes, I have Premiere elements 10, working on a mac and I work with Elements Organizer 10 as well
-Yes, the problem is that I can't find on the computer hard drive the originals for those 4-5 months of videos. All that is there is the XMP files (which dates match what I'm looking for). There aren't any .mts files that match the dates anywhere to be found. It is unfortunately very possible I over-did it with cleaning but I really am holding out hope that I'm just looking in the wrong spot. I am pretty proficient on a PC but unfortunately rather new to the mac and was holding out hope that they are hidden somewhere and it's just user error that I can't find them.
-I don't actually have a project that is missing files - it's just missing in the elements organizer. I had not yet started the 2012 project yet. I was attempting to start the project this evening when I discovered that the files I had put in organizer months ago were not linking correctly. When I click on files that are present (basically some files after November 2012) and follow the link, I am able to find them (.MTS files and some .MOV files) in the hard drive.
-I very well could have renamed source media files and folders and likely moved them around. I feel like they would have to be somewhere for there to be an image on the Premiere elements organizer (image w/ little yellow question mark on it) - unless that image is part of the .xmp file?
-I do not have the original footage on the camera's memory. We only use the internal memory of the camera & transfer to computer & back up - keeping original file structure so I figured that was enough :-( Unfortunately that footage from 2012 is long gone off the camera.
Thanks again for your help. If it was any other footage I'd chalk it up to a lesson learned, but those first moments of my daughter's life are super important so I hope I can figure this out!

Adobe Premiere Elements - serial number provided by Adobe won't work

Trying to install Premiere Elements ....
Entering serial number provided by email after online purchase (from Adobe) on a Windows 8.1 OS gives "Adobe genuine software verification failure": "The product you are trying to install...appears to be counterfeit"
Tried installing a trial version and then entering serial no. into purchase option - didn't work.
Any help would be much appreciated. I have spent a total of 5 hours (over 2 days) on the customer care chat line to no avail....

PICNetBC
This is not Adobe. Rather user to user. From your description of the issue, it would appear that Adobe is the only one who can resolve your issue.
Please confirm what version of Premiere Elements is involved and on what computer operating system is involved.
If you purchased Premiere Elements 13 from Adobe within 30 days of purchase, Adobe should be able to resolve this problem
a. Chat Orders - for return/refund
https://helpx.adobe.com/sea/contact.html?step=PRE_membership-account-payment_payments-invo ices-orders_stillNeedHelp
Premiere Elements
Membership, Account, Payment
Payments, Invoices, Orders
Chat Panel
If the above link does not hold its set, the you will need to navigate to the Chat Panel using the above titles as guides.
b. Chat - ID, Sign In, Account Help
Contact Customer Care
Premiere Elements
Adobe ID, Signing In
Adobe ID, Sign In, Account Help
Chat Panel
If the above link does not hold its set, then you will need to navigate to the Chat Panel using the above titles as guides.
Just so that I am better understanding your post in the Adobe Premiere Elements Forum today, how was your issue left with
the Adobe Chat people that you reached and spend so much time with on this matter?
ATR

ADOBE Premiere Elements 11 start niet !

Mijn "Adobe Premiere Elements 11" start niet op na herinstallatie door een computerstoring. De installatie is vermoedelijk mis gegaan. Kan de registratie weer vrijgegeven worden?? Bij wie moet ik dat regelen?. Want een mens verdwaald in het klanten servicebos van ADOBE.
Met vriedelijke groet "Vriefoto".

Helaas zijn er maar weinig mensen hier op het forum die Nederlands lezen.
Bovendien is dit het Premiere Pro forum en niet die van Elements.
Graag je vraag en in het Engels hier plaatsen:
http://forums.adobe.com/community/premiere_elements?view=discussions

Het gaat over Adobe Premiere Elements 10

Similar Messages

Maybe you are looking for