Heterogenous Transport Management System

Hi All
Some one can help us with the doubt concerning with the Transport Management System with a Heterogenous Systems. We want to know if it is possible and what we need to do to have the next landscape:
DEVELOP System with IBM Server with AIX 5.3 O.S and Oracle 9.2 DB Server
QUALITY and PRODCUTIVE Systems with SUN Servers with Solaris 9 O.S. and Oracle 9.2 DB Server.
Best Regards
Reynaldo Rebolledo

Hi Reynaldo,
We are planning to go for a similar setup of DEV running on IBM AIX and QAS & Production running on Sun Solaris 10 X64/x86. Is there any specific challenges or bottlenecks that you have faced with this setup? Could you please share your experiences?
Thanks.

Similar Messages

  • Transport Management System Configuration

    Hi,
    I have a question here, on Transport Management System.
    We have new 64 bit boxes. I first migrated our dev SCM 4.0 box from 32 bit to 64 bit, it asked for being a Domain Controller. Configured it as a Domain Controller, and continued with the upgrade and completed the upgrade.
    Now, I am going to the second box (QAS). I have performed the migration from 32 bit to 64 bit. Now, when I login to this box, in my understanding, TMS should offer to make this system part of the already existing domain right? It doesn't happen that way. It is forming itself again as a domain controller. After some changes and update configurations on both the boxes, the QAS box now says, "Waiting to be added into the domain by the domain controller" something similar to this. But, when I go and login to the domain controller (DEV), it doesn't show anything there.
    In the QAS system when I go to the System Overview, I see both the systems but, they both show under the two different transport groups. I am totally confused here. Am I doing something wrong here? The only problem I see here is, the domain controller (DEV) is on SCM 5.0 as it is already upgraded from SCM 4.0 but the QAS is still in SCM 4.0 and waiting to be upgraded. Do you think this could be a potential problem? If so, what is the solution to continue with the upgrade because, I am sure the upgrade won't work without the Transport Management System configured properly.
    Please help.
    Thank you.

    Hi Gus,
    Thank you for the prompt response. Thank you.
    There are couple of things to be considered before following your suggestion.
    1. Our QAS box is in Kernel 6.40 (32 bit) and my DEV (upgraded) is in Kernel 7.00 (64 bit). In this kind of heterogeneous environment, I am sure the R3trans versions should be different. Is it possible to configure the transport management using the shared transport directory (Transport Group)?
    2. Now, when I login to the QAS box, as I said in my previous message, I see two entries. One it should the APD (Domain Controller) with a different transport group. And I see the APQ in a different transport group. The problem here is, I cannot edit or delete any of the entries in the APQ - STMS because, it keeps saying all changes could be made only in the domain controller. A point to be noted here is, even though it shows two different transport group, it points to the same transport domain 'DOMAIN_APD'. Another thing to be noted here is when I look at the domain controller (APD), I don't see an entry for APQ or any awaiting approval requests.
    Kindly suggest what needs to be done here.
    Thank you.

  • Transport Management System with Solution Manager

    Dear all,
    Do you know the function transport management system(TMS) with solution manager, I already search in SAP document but not found this function.
    Do you know how to config solution manager for TMS and documents related with this function please guide for me!
    Thanks all very much !

    Hi,
    Check this link.
    https://websmp103.sap-ag.de/~sapdownload/011000358700000508502008E/ChangeRequestManagement.pdf
    Hope this answers your questions.
    Feel free to revert back.
    -=-Ragu

  • All Information regarding Change and Transport management System in SAP

    Hello Experts,
    Iam into Basis . I need all information ,fundamentals and concepts over Change and Transport management system in SAP .Its fundamentals,the way it works ,how requests r transporteded etc.  I want more of this information in regards to practical scenario. Plz dont provide help link as iam aware of that. I need good explanatory content ,in your own words shall be appreciated more. If any body has any self prepared good explanatory and procedural matter , tat will be of help.requested to revert at earliest as this is a bit urgent. My Email Id is [email protected]
    Useful answers shall be rewarded points.
    Thanks and Regards,
    Somya

    check this link
    http://help.sap.com/saphelp_47x200/helpdata/en/d7/8eb9361a75ea43e10000009b38f839/frameset.htm

  • Setting up of Transports Management System  in EP7.0

    Hi Experts!!!!!
    Can you please provide the documents or links for configuring the transport management system for EP 7.0 Systems.
    Regards,
    Vamshi.

    Vamshi,
    These could be helpful.
    http://help.sap.com/saphelp_nw04/helpdata/en/44/b4a0137acc11d1899e0000e829fbbd/frameset.htm
    http://help.sap.com/printdocu/core/print46c/en/data/pdf/bcctstms/bcctstms.pdf
    Reward points for handy posts!
    Cheers,
    Sandeep

  • How to Configure Transport MAnagement system in CHARM

    Hi
    How to Configure Transport MAnagement system in CHARM? Here our requirement is when ever a change request approved in the background Transport request should be created automatically. We have configured all the Transport Routes in our lanscape.
    Can any one tell me the detailed process? If you have any Configuration document please share it to me
    Points will awarded for helpful answer
    Thanks
    Bhaskar

    In a two system landscape is it necessary to make development the domain controller always?
    No such compulsion as such exist(correct me if wrong),however why you want to make production your domain controller?
    This is not recommended.
    Regards,
    Ashutosh

  • Transport management system in ABAP

    Hello Abappers,
    Could you please provide me with the guided procedure of how the transport management system in ABAP works?
    Please explain it in detail.
    Points will be rewarded for relevant answers.
    Regards,
    Mansi.

    Hi,
    Try these links...
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCTSTMS/BCCTSTMS.pdf
    http://www.bayerbbs.de/fileadmin/user_upload/bbs_internet/pdf/brochures/Einkauf/TM3%20Broschre_en.pdf
    Do Reward points if useful....
    Regards
    AK

  • R/3 transport management system

    Hi experts,
       can anyone explain about R/3 transport management system and reviewing them in test and production system.if any docs.........plz give me the link.

    Hi Samanvi,
    check the below links may be useful for you....
    Re: Transport Management System (TMS) of R/3
    transport management system
    documents of Transport system
    ~~Guduri

  • Problems with Transport Management System

    Hi All,
    i seem to be having some issues with my Transport Management System, we have a two system landscape DEV & PRD, the operating system is windows 2003 server. i am trying to access the usr/sap/trans on the transport host (DEV) from the PRD system, i have put patches on the DEV server, but i can't access these patches from the PRD server. I have also tried to release a test transport, but the queues are not being updated. the systems are in the same Domain and the same transport group. on the PRD server i have specified the following value for the DIR_TRANS =
    DEVSERVER\sapmnt\trans. i have checked the files and they are shared, what could be the cause of this?

    Can you please check the access of global TRANS directory from your PRD server. Login to your PRD server, goto transaction STMS --> Overview --> Systems. Select your developement system and goto SAP System --> Check --> Transport Directory. If it can access the global directory the tick marks will come otherwise there is some problem with the directory access.
    Regards,
    Abhishek Jain

  • Do we need to setup traditional ABAP Transport Management System on XI?

    I was confused that do we need to setup ABAP transport Management System on XI, since the IR and ID object will use CMS or File to transport between DEV->QAS->PRD. If we still need, could you pls let me know why we need it?
    one more question is: if we maintained some parameter in XI dev, say, we maintained Integration Server patameter to let system can moniter Syn message, if we want this paramter used in XI QAS, is that the only way to maintain it mannully in QAS, or we have other way to make it? thank you for your help

    Zhang,
    You are absolutely correct. You transport all your ID and IR objects using CMS or File transports.
    But lets suppose you have developed some zprograms or abap mapping in XI. This basically reside on the ABAP stack. So for this objects to transport we will follow the procedure what we do normally to transporting the R3 objects. So what ever you develop on the ABAP stack we need to transport to QA and to Prod using ABAP transport system.
    ---Satish

  • Change Request Management without Transport Managment System

    Hello,
    we would like to use the Change Request Management but without using the Transport Managment System (TMS). Means, we do not want that transport request are created automatically, we do not want that it is possible to log on to the satellite systems via the Solution Manager and we do not want to integrate the transport track into the Solution Manager.
    What effort do we have to estimate for such a change? Does anybody already use a process like this? We would be grateful for any idea or solution.
    Many thanks in advance.
    Jenny

    Hi Jenny,
    you can do this with the following activities in your custom Business Transaction (BT):
    - remove un-useful actions from your action list (TA: CRMC_ACTION_CONF)
    - remove the action from the actions depending on user status (TA: starting from SPRO)
    - unlock the switches from your SMI Project CTS Switches (TA: SOLAR_PROJECT_ADMIN)
    The effort, for copying a standard BT and remove the actions and testing it, is about 5 days, if you already know how to customize a ChaRM BT... last but not least if one of the standard flows is what you really need.
    Please let me know if you need more details, otherwise please reward the forum points
    Regards ,
    Giampaolo

  • Business Package for Transport Management System & Travel Mangement System

    Hi,
    Is there any <b>Business package</b> available for <b>"Transport Management System" and "Travel Mangement System"</b>?
    Please provide some link, if it is available.
    Thanks in advance.
    Manish

    Hi Manish,
       travel management is part of the ESS business package.  As far as transport management, if you are talking about TMS capabilities for moving object in the landscape, go to https://www.sdn.sap.com/irj/sdn/developerareas/contentportfolio and search for "transport"  You will find a thirdparty package for this.
    Good luck.
    John

  • Transport Management System

    In the TMS   e.g. we have three systems   APP >  QTS> PRD
    Is all of them have a seprate database installation or same.
    Will the client need to same to transport changes to other system.

    Right, Prince covered the second issue both issues very nice. One of your systems should be selected as the transport domain.
    Here you will find enough information:
    Transport Management System (BC-CTS-TMS)
    http://help.sap.com/saphelp_nw04s/helpdata/en/9c/a544e1c57111d2b438006094b9ea64/frameset.htm
    Rgds,
    Loukas

  • What is Security & Transport Management system?

    Hi,,,,
    Can anyone help me out on
    What is Security & Transport Management system?
    Thanks,
    Swamy
    Edited by: Alvaro Tejada Galindo on Apr 4, 2008 6:02 PM

    Hi Swamy,
    Transport Management System is the process of reflecting the changes done in the Development server into Production Server.
    When we start the development work, we assign the work to a Transport Request Number.
    Once the development is completed the object is moved to Quality Server for Business Functionality Testing.
    If the object meets the all the test conditions then finally it is moved to Production Server for the end user.
    Security can be explained more effectively by any Basis person.
    cheers!!!

  • Central transport management system

    Hi All,
    How do i configure central transport management system within Solution Manager to find out if transports within different environments can be controlled from single system.
    Regards
    Suresh

    Hi:
    You first need to have every SAP system already configured into Solution Manager in a Solution Landscape whereas, to configure the central TMS to handle all the T.O you need to configure the Change Management feature in Solution Manager.
    Additional information and also the installation and configuration guides are located under http://service.sap.com/solutionmanager
    Hope this helps!
    Best Regards,
    Federico G. Babelis
    http://www.gazum.com

Maybe you are looking for

  • Error while transporting Queries

    Hi, I am getting this error while transporting queries!! Object '!ZTIC_UKA' (ELEM) of type 'Query' is not available in version 'A' Message no. RSO252 Diagnosis You wanted to generate an object with the name '!ZTIC_UKA' (in transport request ELEM) of

  • Latency, here we go again...

    So if I were to buy a Mac Pro (4 or 8 core?)... with 8GB ram and the Apogee Duet and I worked only with VIs and Samplers... except for my Vocals (average 6 tracks per song) but i only record my vocals one track at a time but i like to record my vocal

  • Error writing temporary file

    I recently tried installing flash player and hit a problem so I looked it up and found an uninstaller. I was planning to uninstall then install the new version but when I ran the setup I only got the error message "Error writing temporary file. Make

  • How many classes in Java?

    I'm new to Java. Does anyone have a link or know the exact number of classes and methods in the java programming language that we use and their classifications (e.g. how many number of classes are used only for drawing rectangular objects on a form a

  • Adding Tcodes to SAP menu path

    How to add custom T codes and sap T codes to a particular folder in SAP menu path? Here I would like to display new transaction codes in below SAP menu path .  SAP menu path will be the  initial screen of SAP. SAP menu->Information system->finance ac