Hetis 965 and large-screen displays

Has anybody tried to use Hetis 965 barebone (or any MSI motherboards based on Intel 965G chipset) with 24" LCD monitors? I wonder whether the barebone provides native support for 1920x1200 resolution.

From: http://www.intel.com/products/chipsets/gma950/index.htm
Quote
If you want to watch video on your PC, then utilize Intel GMA 950 graphics for smooth video playback, native 16:9 format support for wide screen flat panels, motion compensation for smooth DVD playback and support for popular HDTV display formats.
I guess the answer is yes then
FYI, you can find the latest 965G graphics drivers here:
http://downloadcenter.intel.com/Product_Filter.aspx?ProductID=2576&lang=eng

Similar Messages

HT4623 why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

You are in Recovery Mode. Follow the instructions below to recover your iPad.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

Downloaded photoshop elements 12, installed ok and activated, started it and splash screen displayed and app launched then shutdown

Downloaded photoshop elements 12, installed ok and activated, started it and splash screen displayed and app launched then shutdown immediately.
Repeat and crashes again. Help it won't start!

Solved! Tried everything in the support documents and none of it worked. Massive frustration with Adobe Chat staff who know nothing and just kept telling me to look at the support documents over and over. They also gave me a contact number in Australia that has a recorde d message saying the product is not supported! What is that about?
Finally Anand from Adobe tech support called me (from when I reopened the original support case that gave me the serial number).
Just had to rename folder SLCache in c:\program files(x86) and reaccept the EULA and reactive. Now everything works fine. Way to hard.

I turned on my iphone this am and the screen display is larger than the phone and I can't resize it. How can I make it smaller?

The screen display on my iPhone won't resize. How can I make it smaller?

You have Zoom on... double tap with three fingers to turn it off. Go into Settings > General > Accessibility to disable it.
See p. 243... http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf

10.4.9 and corrupted screen display

I updated my 1.83Ghz MacBook Pro to 10.4.9 today, but when I wake it from sleep, the screen display is severely corrupted. I need to hit the power button, and get it to sleep/wake up again before the screen clears and the machine is usable. Anyone else notice this?

I am experiencing the same issue on a new MacBook Pro after going to sleep.
However, you can actually enter your log-in details (if you've set up log-in after sleep under security), and access the Finder, but the screen is still corrupted.
However, if I close the lid, and reopen, the problem resolves itself, i.e. the screen is no longer corrupted, and I can log-in as normal, i.e. so, you don't need to power cycle.
Previously, I tried resetting P-RAM, and that also seemed to temporarily resolve the issue, but it occurred again about a week later.
I have a feeling it may be something to do with the "Safesleep" file being corrupted, and I have tried to disable that via Terminal using the following command (usual disclaimer about making changes via Terminal): sudo pmset -a hibernatemode 0
(NB. default setting is 3 if you want to turn this feature back on).
I tried that yesterday, and the issue hasn't re-occurred yet, but will keep you posted. I suspect that isn't really the issue, because I'm not always trying to recover from the safesleep file, i.e. just normal sleep after a few minutes without any power loss.

Hi, Kindly assist my phone went frozen and no screen display

Hi,
what do i do i am using iPhone 5 and it went dead and frozen no screen or bottom display.
regards

Reset, hold both home and power buttons for about 10 seconds until the iPhone begins to start. If still nothing, connect iPhone to Wall Charger for 10 minutes, it may turn ON itself. If still nothing, keep on Wall Charger and Reset, hold both home and power buttons for about 20 seconds until the iPhone begins to start.

Ipod permanetly on hold and DND screen displayed - Help!

hooked up my iPod to my PC and then attempted to start up iTunes. After several failed attempts to start up iTunes (i.e., double-clicked several times, waited, and nothing happened), I disconnected my iPod. Only then I was able to start up iTunes. However, the "Do Not Disconnect" notification is frozen on the iPod screen. I tried to reconnect the iPod to my PC (with and without iTunes running) and the iPod screen remained frozen. The computer no longer recognised the ipod as a drive, nor in itunes. The hold icon remains permantly on even after toggling the hold switch on/off several times. Resetting the ipod does not work as the click wheel is not responsive (ipod on permanent hold)

If holding the MENU and SELECT (center) button doesn't work, you might just have to let the battery completely discharge. This will force the iPod to reset the next time you connect it to power.

Problems with safair and yahoo screen display

Is anone else having issues with their screen flashing when they use safari and go into their yahoo email account? Only from mail. And only on the inbox screen.

My mac screen flickers in yahoo email

When I try to open a picture it does open but closes very quickly and the screen displays a black border with a white circle and a ! in the middle????? Help!!! GM

WHEN I OPEN A PICTURE FROM IPHOTO IT CLOSES VERY QUICKLY AND A BLACK BORDER WITH A WHITE CIRCLE WITH AN ! IN THE MIDDLE OF IT. WHEN IT START A SLICE SHOW THE PICTURES ARE NOT THERE. HELP!!!!

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Other than that, what version of iPhoto do you have? Assuming 09 or later try
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD
P.S. Please don't type in block capitals. They are harder to read and on the forum it looks like you're having a tantrum

Good morning...all of a sudden my email stopped working and the screen displayed nothing at all.

I tried to log out but it said to try again quit mail and choose log out from the apple menu. I went to quit mail but it was faded out and I could not click on it. I then went to the task bar at the bottom and tried to click on mail but nothing happened. I also turned off my computer and turned it back on again, email still not available. This just seems to be on my iMac. I am receiving email messages on my iPhone and iPad. Oh, Safari still works on my iMac!!
Help.....

You've left out some very basic information: iMac model and Mac OS version.
There are four broad familues of iMac going back to 1998, and they have different troubeshooting procedures. Please do "About this Mac" from your Apple menu to see your OSX version, While there tell what the same window says for "Processor." That will at least narrow your model to its family.

TS1372 I have iPod Classic in Disk Mode and when i connect it to my apple computer it does not appear in iTunes and the screen displays a message saying "Do not disconnect" with a circle with a line through it, flashing. What do I do now?

I have iPod Classic in Disk Mode and what do I do next cause it's not showing up in iTunes?

Does the iPod appear on your desktop as an external hard drive? Has the iPod ever successfully connected before? Disconnect your iPod and reset it using the Select (Center) and Menu button combo. Then reboot your Mac, open iTunes, and reconnect your iPod to a high powered USB 2.0 port and see if it's recognized.
Have you worked through all the troubleshooting here?
iPod not recognized in iTunes and Mac desktop
B-rock

Brand new Thinkstation D10 server fails to boot, no beeps or screen display

This server had been working fine for several weeks and today I needed to reboot it. It has been rebooted several times before so so I wasn't trying something new. I hit the Vista Start button and it immediately shut down. I couldn't recall if Vista prompts you to Stand-by/restart/shutdown but I think it does - this time it didn't. :/ Afterwards, it would not boot.
I tried:
Unplugging and replugging it in: it then attempted to boot but shut itself down again after about 30s.
a Power Supply Reset
Reseating the memory cards
Removing one of the 4GB memory cards
Trying the other memory card
Swapping the two memory cards
Inserting a bootable disk (it never gets to the point of reading anything although the drive spins up)
Checking that everything in the system board was plugged in
Making sure none of the wires were hitting anything else (shorting out)
When replacing that annoying cover from over the memory cards, made sure again I was not pinching any wires
The server does not beep and the (directly connected) monitor never comes alive to display anything when I attempt to reboot.
Per the docs, I observed the power supply Diagnostic LEDs and front panel Power LED while attempting to boot and only the green Diagnostic LED on the power supply is ever activated. The table indicated this means replace the system board.
Aack!
Before I head for the support # and an eventual shipment back to Lenovo, would it be worth my while to try and replace the CMOS battery? Or would a failure of that battery still have resulted in some indication of the problem (beeping and/or screen display)? Can anyone think of something else to check?
Just thought I'd ask around before assuming that I'm stuck with the system board diagnosis).
Thanks

The list of things that will make a computer power down on it's own before it can ever get into the OS or initiate a video feed is a short list.
A CPU thermal trip usually occurs within 30 seconds. This can be cause by a loose or improperly seated heat sink or a failure in the thermal grease coverage. If your D10 arrived with one CPU and you recently installed a second CPU, try taking the second CPU out. Should this work, verify the second CPU is the exact match to the first CPU and that the thermal grease is properly applied to the heat sink and the heat sink is securely mounted.
Ambient temperature thermal trip usually takes longer, but can be significantly shorten if the air baffle for the memory is not installed. Computers with high Front Side Bus frequencies result in memory DIMMS that get very hot.
DC power trip. This can happen if too much power is being drawn through any of the PCI ports or through the power supply itself.
When you are using a highend video card, check to see if the video card has it's own power connector(a small six lead box). If it does, there is a power connector, from the power supply, to plug into it. Without that power plugged in, the video card may appear to hum, and the it will draw too much power through the PCI slot.
Should you have added any additional PCI adapters, try removing these for a test. If that works, add one card back in at a time to isolate the offending PCI card.
Disconnect any USB or Firewire devices you may have attached, including the mouse and keyboard. If it comes back up and you have video, power down and reconnect the keyboard and mouse only and try again.
If you have the memory card reader option and kids, check to make certain no one has inserted something into the memory card readers. My kid inserted a quarter into one of the slots on my reader. My workstation powered down pretty fast. Consider moving the workstation to higher ground.
Last by not least, disconnect any additional optical drives you may have added. Some SATA devices have both the standard PC power connector and the SATA power connector. Do not connect both of these power sources to the same drive. The drive will be damaged and your computer will not stay powered on for very long.
Should this all fail to resolve the issue, contact Lenovo support. To make your support experience faster and more pleasurable, send them this list of things you tried. If this list of possible fixes fails, it's probably a power supply or system board issue, and I would start with the power supply.
If an electronic device has a defect it will fail within the first 90 days. Once you get it past the first 90 days, it is generally good for years.
I hope this helps!!!
Digitaloz

Windows 7: No On-Screen Display

I have updated my T60 to Windows 7 and have installed all the latest drivers for my system. I have installed the latest drivers for hotkey and system interface, but still cannot get the on screen display to show up. I do get the on screen display tab on my thinkpad display settings, but if I apply them nothing works. Any thoughts?

I had the same problem on my T61P. This site had the solution.
http://superuser.com/questions/83367/lenovo-t61-mute-button-and-on-screen-display-mute-indicator-doe...
Basically insert shortcuts to
c:\drivers\hotkey\osd\lvosdsvc.exe
c:\drivers\hotkey\osd\tponscr.exe
c:\drivers\hotkey\osd\tposdsvc.exe
into your startup folder and it works.

Please help! printer error- screen displays "C4EB8000" anyone know what is going on?

I have a project due tomorrow and I haven't been able to get my printer to work! It is an HP Photosmart C5550 All-in-One and whenever I turn it on the buttons flash and the screen displays a blue background with a white power sign (the rotated Q or circle with line thing) and below it says "C4EB8000".
Not sure what is going on! I know nothing about computers and printers so anything would help
Thank you so much!
-Grace

Check in System Preferences>Displays if the 'Automatically adjust brightness' is checked.
That may be the reason.
ciao.

As a stockholder, I would like see the development of iTV with Retina display and integrating Siri control, internet access, and iTunes apps. This new product would be a large screen, thin wall mounted television, much like a oversided iPad.

As a stockholder, I would like see the development of iTV with Retina display and integrating Siri control, internet access, and iTunes apps. This new product would be a large screen, thin wall mounted television, much like a oversided iPad.
Do you think this product is possible?

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

Hetis 965 and large-screen displays

Similar Messages

Maybe you are looking for