Heuristic Run  - Fail

Dear All,
               Working on SCM 5.0
Whenever i change/load  the T- Lanes , next Day the first Heuristic Run Fails.
After Changing the T-Lane , i do the following,
1. Consistency Check - Planning Areas.
2. Consistency check - Live Cache
3. Low level Code.
Then also i am facing the same problem?
Why ? and how can i resolve the same..
Regards,
Rajesh Patil

Ya ..when u change T-lane/Load new T-Lane first Heuristic Run fails ...and in application log of Heuristic Run ... for some product- locations the source location isnot showing?
But when i rerun(2nd time) the same Heuristic it is working fine?.
As i am taking Daily Run..
plz guide me when i Change the T-lane ...Except the above consistency check is there any thing to do?
So the Heuristic will run smoothly.
Regards,
Rajesh Patil

Similar Messages

  • SNP - Heuristic -First Run Fails

    Dear All,
    I am Working on SCM 5.0 SNP..
    Working on Following ..
    1. Heuristic Run
    2. Deployment
    3.Trasport Load Builder (TLB)
    We are running Heuristic on Daily Basis.
    If i run Heuristic after loading new Tranportation Lane(Master Data) the FIRST run fails?
    Why?
    After loading the New Trasportation Lane..i always Check Low Level Code/Live Cache Consistency Check the also i am facing the above problem.
    Plz help me to resolve the same.
    Regards,
    Rajesh patil

    Hi Rajesh patil,
    From your observations, it is clear that there is timelag required by system to update the master data (TL) newly maintained and the start of heuristic run.
    1)  Once the new TL is maintained, run consistency check (F9) to check for any errors
    2)  After maintaining the lane, ensure that the same is available in the active model
    3)  Once after maintaining the lane, clear all inbound and outbound queues before start of heuristic run.
    4)  Also run low level code/cons checks before start of the heuristic run.
    Please confirm with your findings.
    Regards
    R. Senthil Mareeswaran.

  • ORA-3113 while running export (first run ok, second run fails)

    Hi,
    I'm running 10g (10.1.0.2.0) on gentoo Linux.
    After a restart of the database I can do an EXP for any user without errors. But when I repeat the same command after the export I get the following error:
    . . exporting table WEB_SESSION_DATA 0 rows exported
    . exporting synonyms
    EXP-00008: ORACLE error 3113 encountered
    ORA-03113: end-of-file on communication channel
    EXP-00000: Export terminated unsuccessfully
    It's always the same error on the same task (exporting synonyms) but always just for the second and any later export, while the first one is ok.
    I read through some forums and found, that ORA-3113 is a standard error which just hides the real error. So I look into the trace files and found:
    ksedmp: internal or fatal error
    ORA-07445: exception encountered: core dump [jox_lookup_known_object()+413] [SIGSEGV] [Address not mapped to object] [0x1AD14034] [] []
    Current SQL statement for this session:
    SELECT SYNNAM, DBMS_JAVA.LONGNAME(SYNNAM), DBMS_JAVA.LONGNAME(SYNTAB), TABOWN, TABNODE, PUBLIC$, SYNOWN, SYNOWNID, TABOWNID, SYNOBJNO FROM SYS.EXU9SYN WHERE SYNOWNID = :1 ORDER BY SYNTIME
    If I call this SQL from sqlplus I get the same ORA-3113, so this seems to be the cause for the export failure.
    When I remove the DBMS_JAVA.LONGNAME calls from the statement, it runs fine. It also runs fine, when I add a "and 1=0" to the EXU9SYN view. But this will not really solve the problem, because then all synonyms don't get exported.
    I also checked all the synonyms and they are valid, the referenced tables exist and can be queried.
    Because we use JavaStoredProcedures I cannot remove the Java Features in Oracle. But I reinstalled it (rmjvm.sql and initjvm.sql) but this did not help.
    Does anyone have an idea what's happening here?
    Especially the "first run ok, second run fails" seems to be very strange, because DB objects including DBMS_JAVA should be ok, if the first export can be done. So what changes in the database during or after the first run?

    Maybe description for bug 3953108 (ORA-7445 AND ORA-3113 DURING DIRECT FULL DATABASE EXPORT OF PUBLIC SYNONYMS) is helpful.
    Werner

  • Issues in Heuristic Run

    Hi Friends,
    I am having a small problem during the Heuristic Run.
    System is showing error when I try to take a Heuristic Run for a period (say May) if there are some planning results lying in the system for that product in other period (say April).
    Is there any specific setting required so that when I run Heuristic for the month May, system will give result for May althogh there is planning results lying for April.
    Guidence solicited.
    Thanks & Regards
    Kumar

    Hi All,
    Thanks for this prompt response.
    I am talking about SNP Heuristic. I am giving an example to understand the matter :
    1. Say I have a product X for which I manually enter a Forecast quantity of 100 in the month of April. Then I run a locational Heuristic. The product is Inhouse manufactured. So system generates a Production Planned Figure of 100 in April.
    2. Now I put a forecast qty. of 150 in the month of May for the same material. Then I run locational Heuristic. Now I am finding that system is giving error and not generating any Production Plan.
    But if I delete the Planned order of April and again run Heuristic, system generates Planned order for both April & May.
    So, the problem is, when there is already an order existing in the system, system does not generate orders for other periods.
    Hope this is now clear.
    Looking forward to your suuport.
    Thanks - Kumar

  • Heuristic run @ destination location is creating the purchase requisition without source plant

    Hello All,
    Trust you are doing well.
    Believe this is the good time to connect with you all get some advice on the below mentioned scenario:
    Material (XXXXXX) is discontinued at source location (Plant specific material status: 90) but the same material
    (XXXXXX) is still used in destination location (plant specific material status: 60). Here heuristic run @ destination location is creating the purchase requisition without source plant.
    Here the customer expectation is that “SNP should not create the order, since the material is discontinued in source plant”
    Could you please advise?
    Regards,
    Prabin

    Hi Prabin,
    You can change the SNP profile to NO PLANNING automatically and exclude the target location from the SNP run. Maybe you can try using Badi: SMOD_APOCF005.
    This is what I would do:
    1- Do not exclude the status 90 in the iModel.
    2- Then when you change the status in order to discontinue a material at the source location you will be changing the status from 60 to 90 and you will CIF this modification to APO. At this time, I would use the BAdI: SMOD_APOCF005 to identify this situation. You will need to add a code in order to identify what are the possible target plants of your source plant and you will need to change the SNP Profile at the target location.. look for a BAPI for this...
    Take a look of this document to see an example code of SMOD_APOCF005:
    APO SNP - Master Data Automation
    Kind Regards,
    Mariano

  • Continuation of aborted change run failed in BW 3.5

    Hello experts,
    everytime when an attribute / hierarchy change run has been aborted (by means of unexpected runtime errors) I failed in starting it next time. Error RSENQ 2 ("Lock not set for: activation of hierarchy") occured in this case. I found a way to overcome this by manually setting flag CLOSEDFL = X in table RSDDAGGRMODSTATE.
    Now I found SAP note 903886 which forbids to do so by reason of potential inconsistencies.
    Does anybody know how to handle the specified situation in a right way?
    Thanks in advance for your help,
    Oliver

    Hello Shabar,
    I implicitly postulate that the reasons for the failure always have been detected before trying once more.
    For example, implementing a wrong SAP note (1006192) caused runtime errors. After resetting the note implementation the error disappeared.
    Sorry, this was not my question!
    The point is that change run failes as long as the flag has not been set in RSDDAGGRMODSTATE even if the reason for the failure has been fixed.
    Yours,
    Oliver

  • When running labview's test executive I recieve runtime error: Call to step "PRE-RUN" failed. Could someone explain this error?

    I have a set of vi's that work when run under labview. However, when calling these vi's from labview's test executive I recieve runtime error: Call to step "PRE-RUN" failed. in Assign Connector Pane.vi->Call Test.vi->Execute Pre-Run.vi->Test Executive. Could someone explain this error to me? (or ideally tell me how to fix it?) Thanks.

    Hello,
    There are any number of possible causes to this problem. Which version of Test Executive are you using? Have you upgraded your Test Executive recently? The latest version is 5.1.1. If you have changed anything about Test Executive on your computer recently, I recommend you perform a mass compile of all your VI libraries, as having different versions of the VIs on your system could often result in the "Call to Step XYZ Failed" errors. Also, are you using any DAQ or Analysis VIs in your steps? We have seen problems where the use of DAQ or Analysis VIs in the sequence can cause intermittent "Call to Step...Failed" errors. There are some KnowledgeBase entries on our website that discuss this problem. Are you using the Test Executive in the VI environment, or
    as an executable? Again, there are some problems with using Test Executive as an executable that result in these errors, and there are also KnowledgeBase entries that discuss these problems.
    If you have a pared-down application that demonstrates the problem, feel free to send me your VIs and your .seq file and I will try to reproduce the problem.
    Alternatively, I would suggest you visit www.ni.com/teststand to learn about TestStand, our state-of-the-art Test Sequencing software that completely outperforms Test Executive. It is very easy to use and much more powerful, and we have a top-notch support team available dedicated exclusively to supporting TestStand. As you are probably aware, we are no longer developing Test Executive, and instead are concentrating our efforts on making TestStand the penultimate solution for all our customers' test sequencing needs.
    I appreciate your patience on this issue. Please let me know if I can offer further assistance.
    Have a pleasant weeken
    d.
    Sincerely,
    Darren Nattinger
    Applications Engineer
    National Instruments
    Darren Nattinger, CLA
    LabVIEW Artisan and Nugget Penman

  • Attribute change Run Failed/Scheduled

    Hello All,
    For a process Chain Attribute Change Run has failed in BW 3.5,and I Repeated the Change Run in Chain only
    where Repeat option is ,now the problem is in RSA1 it is now that change run is scheduled
    and sm37 it is showing that Canceled.
    Now there is Other Process Chain in BI7.0  which picks data from  3.5
    Should I repeat the Master data Chain in BW 3.5 followed by in BI 7.0
    Or any other way is possible as in BI7 the chain has run successfully..
    Thanks,
    Kiran

    Hi Kiran.......
    BI 7.0 and BW 3.5............totally two seperate systems..............here BW 3.5 is just act as a source system of BI 7.0.............if change run fails in BW3.5...............it is not going to effect BI 7.0.............
    As ajeet already said............it will effect the SID s in 3.5.............because attribute change run activates the master data...........and SID get generated during the activation of master data.......
    Also it will effect the aggregates............because aggregates also get adjusted during change run.......if any of the aggregates contains the master data.........which are getting activated in the change run....
    Now u r saying........that in SM37 it is showing that the job got cancelled............So it will not locked the master data..............terminated change runs generally lock the master data............then we hav to repeat the chain run to release the lock.........and u hav already repeated the change run............so no issue........
    Hope this helps..........
    Regards,
    Debjani........

  • Attribute change run Failing in Process Chain

    Hi guys,
    Every day my process chains is failing due to Attribute change run and I am maually running attribute change run.
    And one more thing when the attr. change run is triggered automatically,then it is generating 2 change counters in RSATTR tcode instead of 1.
    One is successfully completes and one is still in schedule.After 2days days it is showing like completed change count id.
    Please help me.
    Regards,
    Tiragati.

    Hi,
    As you said Attribute change run step is failing every day.
    can you post the error message. is it failing because of Lock issue or some other issue.
    Mostly attribute change runs fails with lock issues. if its the same problem in your case. make sure that no master data objects runs at the time attribute change run runs.
    Try to put some delay in the process of the Attribute change run so that it will not get failed.
    Check if its the same ACR scheduled or diff objects?
    Regards
    KP

  • Error in Heuristic run SNP

    Hello,
    In SNP after executing Heuristic run it gives me error message "Invalid product-location combination (peagging Area)".
    (/n/SAPAPO/SNP94)
    can any body help me to reslove this issue.
    Thanks,
    Nikhil

    Hi Senthil,
    I have created pagging area for location product( planning version 000  /n/SAPAPO/RRP_NETCH ).
    but i  am not able to assign location product to planning version 000.
    It is already assign to Model 000 active model.
    I am getting error message "No simulation parameters could be set for the active version".
    i am getting error message in Heuristic run because of location product is not assign to active version 000?
    Thanks,
    Nikhil

  • 'ant'  run failed

    Hi
    I am running Retek App R13 on Unix machine.
    The DB and AS have been installed and upgraded.
    When running RMS module , I get the folowing error message:
    Error running the install , Ant run failed- examine the error log for details
    rg.tp23.antinstaller.InstallException: Error running the install, Ant run failed - examine the error logs for details
         at org.tp23.antinstaller.runtime.exe.AntLauncherFilter.exec(AntLauncherFilter.java:88)
         at org.tp23.antinstaller.runtime.ExecInstall.exec(ExecInstall.java:85)
         at org.tp23.antinstaller.runtime.ExecInstall.main(ExecInstall.java:157)
    Caused by: org.tp23.antinstaller.InstallException: Ant run failed - examine the error logs for details
         at org.tp23.antinstaller.runtime.exe.AntLauncherFilter.exec(AntLauncherFilter.java:78)
         ... 2 more
    --- Nested Exception ---
    org.tp23.antinstaller.InstallException: Ant run failed - examine the error logs for details
         at org.tp23.antinstaller.runtime.exe.AntLauncherFilter.exec(AntLauncherFilter.java:78)
         at org.tp23.antinstaller.runtime.ExecInstall.exec(ExecInstall.java:85)
         at org.tp23.antinstaller.runtime.ExecInstall.main(ExecInstall.java:157)
    The files under the error logs contain:
    FRM-91500: Unable to start/complete the build.
    Any help?

    Hi,
    Same error stack message is reported in the following, have a look at it as it might be helpful.
    Note: 473692.1 - Network Integrity 3.4 install fails with java.net.NoRouteToHostException
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=473692.1
    Regards,
    Hussein

  • Supply shortage, after heuristic run

    hi guru s,
    i run heuristic (for loc. product). then i c planning book, i c that for every product heuristic has planned, except one loc-product combination (say product A loc B). analysis .... i found that for that product (A), no planning object found(err msg). then i run consistency check, again run heuristic, and faced the same problem, e.g, no planning for 'A', showing supply shortage in the planning book at loc 'B', but demand was their.and this time no err msg.
    there are valid transportation lane for tht (A) product . procurement type at source loc is 'E' , at desti loc. "F (loc B).
    any help will be highly appreciated.
    Regards,
    Satyajit

    Harish,
    Thank you for your answer. No i didnt create planned order in rrp3, coz, i dont have setting for ppds, so i m not so confident to create planned order in rrp3 (actually i dont have much idea on apo), thinking that it might change the requirment. we r very near to go-live and on final testing.
    no the all other products dont have PPMs in the model, but some of the products have PPMs.
    And one thing what is special procurement type?.. I hve planned order setting -'apo order type' 31 (that is 'in-house production' ) for heuristic run (to genarate Planned order), in the destination loc. (plant).  'Model consys check' completed before.
    Satyajit

  • [6:01:13 PM] Status: Error UVSC Internal Error Detail: [UVSC_DBG_ENUMERATE_BP, MSG: 0x2000, STATUS: 0x1] (1) Status: Run failed.

    sir,
     we are working in arm 7 mcb2300. we get an error "[UVSC_DBG_ENUMERATE_BP, MSG: 0x2000, STATUS: 0x1] (1)
    Status: Run failed." during downloading. we dont know whether it is a software or hardware error. please guide us to rectify it. 
      thank you

    Figured it out.  Somehow the projects that I was working on got corrupted somehow.  After another reinstall I opened an example project, not one of the many that are my own, and it worked.  I had to copy and past the code out of the one project and into a new one, but it is working.  Don't know how my projects got messed up in the middle of working on them.  
    Now back to actually getting work done.

  • ListenThread.run() failed on shutdown

    Hello,
    Could anyone please let me know if getting the following is the expected
    result when you are shutting down WLS? Specifically, I'm interested in
    the ListenThread.run() failed message. I'm using WLS 5.1 on Solaris 5.6
    with JDK 1.2.1_04. The main reason I'm bringing this up is when I
    shutdown my WLS on NT (WLS 5.1, JDK 1.2.2) I don't get the
    ListenThread.run() failed message. Can anyone shed some light on this
    issue? If I shouldn't be getting that failed message, any suggestions
    on how to remedy the situation?
    Thu Aug 24 10:35:42 PDT 2000:<I> <WebLogicServer> Server Logins are now
    disabled
    Thu Aug 24 10:35:42 PDT 2000:<I> <WebLogicServer> Server shutdown by
    system
    Thu Aug 24 10:35:42 PDT 2000:<I> <WebLogicServer> Server shutdown
    commencing NOW
    Thu Aug 24 10:35:42 PDT 2000:<A> <ListenThread> ListenThread.run()
    failed:
    java.lang.ThreadDeath
    Thu Aug 24 10:35:42 PDT 2000:<!> <ListenThread> **** The WebLogic Server
    is no longer listening for connections.
    Thu Aug 24 10:35:42 PDT 2000:<!> <ListenThread> **** You should probably
    restart it.
    Thu Aug 24 10:35:42 PDT 2000:<A> <SSLListenThread> ListenThread.run()
    failed:
    java.lang.ThreadDeath
    Thanks for your help.
    Jeff

    Hi,
    I am getting the same error too. I am using wls510 sp8 running on NT. And IIS plug
    in works with WLS cluster (2).
    How to fix it?
    Thanks
    Jeff Van Dorn <[email protected]> wrote:
    Hello,
    Could anyone please let me know if getting the following is the expected
    result when you are shutting down WLS? Specifically, I'm interested in
    the ListenThread.run() failed message. I'm using WLS 5.1 on Solaris 5.6
    with JDK 1.2.1_04. The main reason I'm bringing this up is when I
    shutdown my WLS on NT (WLS 5.1, JDK 1.2.2) I don't get the
    ListenThread.run() failed message. Can anyone shed some light on this
    issue? If I shouldn't be getting that failed message, any suggestions
    on how to remedy the situation?
    Thu Aug 24 10:35:42 PDT 2000:<I> <WebLogicServer> Server Logins are now
    disabled
    Thu Aug 24 10:35:42 PDT 2000:<I> <WebLogicServer> Server shutdown by
    system
    Thu Aug 24 10:35:42 PDT 2000:<I> <WebLogicServer> Server shutdown
    commencing NOW
    Thu Aug 24 10:35:42 PDT 2000:<A> <ListenThread> ListenThread.run()
    failed:
    java.lang.ThreadDeath
    Thu Aug 24 10:35:42 PDT 2000:<!> <ListenThread> **** The WebLogic Server
    is no longer listening for connections.
    Thu Aug 24 10:35:42 PDT 2000:<!> <ListenThread> **** You should probably
    restart it.
    Thu Aug 24 10:35:42 PDT 2000:<A> <SSLListenThread> ListenThread.run()
    failed:
    java.lang.ThreadDeath
    Thanks for your help.
    Jeff

  • Optimizer Run Failed

    Dear,
    We are using TM 8.0. In transportation Cockpit after I choose the freight units ,when I click on the button "Transportation Proposals", I get "Optimizer Run Failed" error message. Do you have any idea to correct this issue.
    Thank you very much
    Mehmet

    Dear Vikas,
    When I have a look at the RFC log, I see the below message. It seems " /SAPAPO/CSOPT_INPUT_DATA" function module is not available in TM 8.0 System. However, when we look at the other APO systems this function is available. Is there any add on needs to be installed on the TM server?
    <i> 16:20:12 caruso_script.cpp(307) 'MsgMgr' ***** Start optimization run *****
    <i> 16:20:12 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 801 to OutputInterface from [CarUsOMainScript]
    <i> 16:20:12 caruso_script.cpp(310) 'MsgMgr' ***** Load parameters *****
    <i> 16:20:12 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 802 to OutputInterface from [CarUsOMainScript]
    <i> 16:20:12 caruso_script.cpp(321) 'SuperVisor' Setting optimization time to 60 sec.
    <i> 16:20:12 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 803 to OutputInterface from [CarUsOMainScript]
    <i> 16:20:12 caruso_script.cpp(339) 'MsgMgr' ***** load planning data *****
    <i> 16:20:12 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CSOPT_INPUT_DATA
    <e> 16:20:12 caruso_script.cpp(360) 'SuperVisor' <!> CORE EXCEPTION : 14 =
    #RFC_RC (RFC_EXCEPTION) Exception raised
    #RFC_ERROR_GROUP (RFC_ERROR_APPLICATION_EXCEPTION) The called function module raised an exception
    #RFC_ERROR_INFO Function module not found
    #exception=FU_NOT_FOUND
    <i> 16:20:12 optsvr_main.cpp(1169) 'MsgMgr' Current check values:
    Regards,
    Mehmet YILMAZ

Maybe you are looking for