HEX Codes for the Apple Remote

Hallo,
does anyone know the HEX codes for the Apple Remote, so I can connect it with my universal remote control?
Dominik

you can train any remote to control the apple tv.
on the appletv navigate to settings>General>Remotes>learn Remote
handy little feature

Similar Messages

HT3176 What is the numerical remote code for the apple remote? I would like to program another manufacturers remote to control my iPod dock

I would like to control my iPod doc with my Denon remote. Does anyone know he numerical remote code for an apple iPod doc?

Hi kwg06516,
This remote(RMT-B126A) doesn't have programmable codes because its not a universal remote. It is exclusive for your player(BDP-S3200) only. It may control other devices such as TVs but with the same brand only.
Thanks,
>Joffrey
If my post answers your question, please mark it as "Accept as Solution"

How do i find the activation code for the apple tv, i am trying to connect to netflix??

how do i find the activation code fot he apple tv? I am trying to connect to netflix.

Welcome to the Apple Community.
You need to create an account on your mac/PC and then use your ID and passcode to log in on the Apple TV.

Any one has a coupon code for the photo books

anyone has a coupon code for the apple photo book? THANKS

Thanks that helped out a lot; I combined that program with the serial example. It works well, but it seems to want to update very frequently, as I am hearing relays tripping, but if I set the number I want and hit stop it goes there and will stop at that command. Is there a way to just have it send the data and then just have it leave the serial device alone unless you change the angle. As in only send the data once, but not have to re hit run.
Attachments:
GS-232 Controler.vi ‏37 KB

HT1539 I entered the download code for"THE HOST"but instead I got a copy of"Spring Breakers".How can I correct this? I called a friend that has"Spring Breakers"and the codes are not even remotely alike!!! I did not want to download what I received!!What'

I entered the correct download code for "THE HOST" but instead got a copy of "SPRING BREAKERS"! All of the prompts identified it as "The Host" but the final product was "Spring Breakers"! I called a friend who has a copy of that movie and the download codes are not even remotely alike!! How can I correct this error? I 'd rather have SyFy that a bubblegum teenager flick!! HELP ME, PLEASE?!

Hello Old Dogg new tricks,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/ht1933
Best of luck,
Mario

HT1555 how do you connect an iphone to be a remote for Apple TV without the apple remote?

how do you connect an iphone to be a remote for Apple TV without the apple remote?

you can use the remote app.
http://www.apple.com/apps/remote/

Pairing a NEW remote for the apple TV (2nd gen)

We pair all our remotes to our apple products. Our paired remote for our 2nd Generation apple TV was lost, so we bought a new one. How do I pair the new remote, when the Apple TV won't even turn on because our new remote isn't paired with it..? When I press any button on the new remote I only get a double light flash signalling that the remote isn't paired with that product.
Please help!
Thanks!

A classic chicken/egg problem. I see this in the Apple TV manual:
You can also hold down Menu and Right for 6 seconds to pair Apple TV and the Apple Remote.
When you successfully pair your Apple Remote, Apple TV displays a chainlink symbol ( ) above a picture of a remote. Apple TV now works only with the paired remote.
You might have to change your screen name (kidding).

What is the country code for my Apple ID phone number? Normal att phone in austin tx

what is the country code for my Apple ID phone number? Normal att phone in Austin Texas

I hear you. I put a "1", & it won't accept that. Just keeps coming back w/ "Please specify a valid mobile phone number". I tried to put a "+" in front of the "1", but it won't take that @ all...

Remote infrared codes for the Sony STR-DE675 receiver

Where can I find the remote infrared codes for the Sony STR-DE675 receiver? They are not in the Owner's Manual, nor on the Sony.com website. Thanks.GBP

If you were getting sound and no picture when you had the Wii hooked up to your surround sound receiver, your TV was probably on the wrong input. You would have needed to use the source or input button on your TV's remote and changed the input to the component 1 choice, since that is the port you stated you plugged the Wii into on the TV.
Your cable remote may not be programmed to work with the blu-ray player. However, I think you're misunderstanding the function of the buttons at the top of your remote labeled TV, Sat/Cab, VCR, etc. Your cable remote doesn't work like a Harmony remote. Pushing those buttons at the top of your cable remote are not like pushing the Watch TV or Watch DVD functions on a Harmony (meaning pushing them doesn't change the TV's input automatically). All those buttons at the top of the remote are for that you're describing are to tell the remote which components to control. For example, you are watching cable TV and just used the remote to change the channel but now you want to adjust the volume. You would have to hit the "TV" button on the cable remote to switch the remote from controlling the cable box to controlling the TV. Otherwise, you'd hit the volume controls over and over and nothing would happen b/c the remote would still think it was controlling the cable box. Only a Harmony remote (or similar universal remote) can change the TV's input with the click of a function button.
And to explain why one must change the TV's input when switching components, I always compare the process to the way a tube TV used to work for those that are new to the flat screen TVs. Think of the way your old TV probably worked - you had to have the TV on channel 3 for your VCR, 4 for cable, etc. The input changing is practically the same thing with just a few more steps, if that helps to make things any clearer. LOL
Nothing I post is an official statment of Best Buy or Geek Squad, it is only a helpful opinion!

When importing a spreadsheet with redeem codes into apple configurator, it says it's not the right codes for the app. But it is the right codes. I used one of the codes to purchase the app in itunes.

I have a cart of 25 ipads with a macbook air. I have logged into my VPP account and purchased the needed number of copies. I downloaded the spreadsheet. I took the first code from the spreadsheet, and logged into itunes using a regular account (not my VPP account), and used the code to download the app. I put the app into configurator and then tried to add the spreadsheet with the codes in it. It comes up and tells me that it is not the correct spreadsheet for that app. But it is the correct spreadsheet!! I tried re-downloading the spreadsheet again and even tried re-downloading the app. So I've now used two of my redeem codes and still can't get it to accept it into apple configurator. I removed the app from apple configurator and re-added it. The error message says it's not the right codes for the app "Grammar Games by Tap To Learn" and to please get the codes for "Grammar Games by Tap To Learn." It's the same one!

It won't let me edit my post, so I'm typing this reply to add...
I tried taking the version number out of the title. It looked like there were two spaces in the title "Grammar Games by Tap to Learn". So I even made sure that matched. I still can't import my codes. Any other things to try would be really appreciated.

What is STB Remote Control code for the Magnavox 15MF400T/37 set?

Does anyone know or know where to find the correct remote control code for the 15MF400T/37 set?

If none of the codes worked, your only other option is to do a scan.
WHAT IF NONE OF THE CODES WORKED?
If none of the codes worked, try the following procedure. (As before, we will use the example of a TV. For other devices use the appropriate Device Key instead of the
TV
key in step 2 and 3.)
1. Turn on your TV.
2. Press and hold the TV key.
3. While holding down the TV key, press OK
4. Release both keys. The Device Keys will blink twice.
5. Press 9 - 2 - 2
6. Point the remote at the TV.
7. Press the play button
8. Press FF button . Every time you press the FF button the remote sends out a new power-off command to the TV. Keep pressing FF until the TV turns off.
9. When the TV turns off, you have found the right code. Press OK to store this code.
Note: There are over 300 TV and DVD codes. The most common codes are tried first, but you may still need to press FF over 300 times to find the right code. If you reach the end of the list of codes the entire remote will flash twice and return to normal operation. You can exit programming at any time by pressing EXIT
If you do this and it still doesnt work, then your tv and the verizon remote dont have a common code and it will not work with your tv.
====================================================================================
Error exists between keyboard and chair.

Will the Apple Digital AV adapter work for the DISH Remote Access app?

I have a Sling adapter hooked up to my 722K DISH receiver, and the DISH Remote Access app installed on an iPad 2. Great app, btw.
What I'd like to know is if I'll be able to use this AV adapter to watch my recorded shows on a TV. Hotel room situation, and I would just like a larger screen every once in a while.
So far, my understanding doing some searches here is that the adapter will work for Netflix, but won't for HBO GO (bummer).
Since I'll be phasing out Netflix soon anyway, and this adapter isn't going to work for HBO GO content, I am just wondering if it will for the Dish Remote Access app before I bother to buy one.
If not, is there something that would be a better choice? I did look at the component and composite cables too, but couldn't quite make up my mind.
Thanks for any input.

iphone4 dont support mirror so only apps which support the normal tvout will work on iphone4 witht he hdmi out setup

I can't connect to my iTunes library on my Macbook Pro using the Apple Remote app on my iPhone 4S. Why?

Hi all,
I've been looking through the forums for help with this problem. There are a couple of threads with similar problems, but no solved threads and the discussion doesn't seem to go anywhere... As far as I can tell, it's been causing a lot of annoyance for many users, including myself, but it looks like the community's in the dark about why it's happening!
I'm trying to connect to my iTunes library using the Apple Remote app on my new iPhone 4S. As you may know, there are two ways to do this:
Connect via Home Sharing by setting up Home Sharing on both iTunes and the iPhone, or
Connecting directly to iTunes using a four digit passcode.
I've tried both methods, and neither work!
Here's what happens for each method:
From the Remote app start screen, I tap the "Turn on Home Sharing" button. I enter my Apple ID details (which are definitely correct), and get a confirmation message on my phone saying "Home Sharing is on using [my email address]. To control iTunes: Choose Turn On Home Sharing from the Advanced menu in iTunes on your computer." I then go to iTunes, turn on Home Sharing, enter my Apple ID again and get a confirmation message saying "Home Sharing is now on", etc. However, there's no connection formed between my iPhone and my Macbook Pro - the Remote app just shows a message saying "Turn on Home Sharing in iTunes on your computer or on Apple TV using the account [my email address].
From the Remote app start screen, I tap "Add an iTunes Library", and the four digit passcode is shown on my phone. I select the new "Quintin's iPhone" item that appears in the iTunes sidebar under "Devices", and enter the passcode on the screen that appears. Once I've entered it, I get a confirmation message saying "Your Remote is now able to control iTunes" with an "Okay" button. Clicking the "Okay" button makes the screen and the sidebar item disappear completely. On my phone, a message that says "Looking for ..." is shown on the screen with a spinning loading wheel, but nothing happens. After a minute or two, it stops and simply says "Could not find".
After trying both methods, I went through all of the troubleshooting steps here: http://support.apple.com/kb/ts1741 . Absolutely no effect.
I should mention that I was experiencing similar problems on my old iPhone 3Gs with an older version of iTunes. I thought it might have been some kind of hardware fault and expected it to clear up once I got the new phone, but the problem is still there. It's a new phone, a new computer, a newer version an iTunes... even a different network I'm trying to connect to it on. Bizarre!
I've even tried using the Mobile Air Mouse remote application instead. However again, the Mobile Air Mouse app on my phone can't pick up the Mobile Air Mouse server on my Mac.
I'm kind of at the end of my rope here. Anyone?

I have the exact same problem trying to use the Remote app on both my iPhone 3gs and iPad 2 with either my Mac or ATV2. My Remote app used to work on my phone - I can't recall if I ever actually used it with my iPad, but when I tried today, I got all the same results as you did (on both iPad, and then iPhone). I was using my ATV2 to play music from iTunes on my Mac and wanted to use the Remote app, but it would not connect to either device no matter what I did.

How do you get the apple remote to STOP always launching iTunes????

After upgrading to Snow Leopard, I have discovered a few annoyances. The biggest one is that the Apple remote is always launching iTunes when I use it. Even when the Finder is not the target app.
I have my entire Star Trek collection on a firewire drive, and I like using VLC to watch them because of the playlist feature. Every time I use the Apple remote to try to skip to the next episode, it launches iTunes and begins playing music. This NEVER happened before in Leopard or Tiger.
I have gone through the iTunes preferences and also looked for some obscure system preference to deal with this issue, but so far, no luck.
Again, the]is NEVER happened under previous operating systems, so I'm going to assume it's a glitch in Snow Leopard.
Does anyone know what's happening here??
Help me obi-wan.

HI,
Open System Preferences/Security and turn Disable remote control infrared receiver.
You may have to click the gold padlock icon to do this. You will be prompted for your
Admin password.
Also, when you come across a "bug", report it to Apple.
http://www.apple.com/feedback/macosx.html
And it seems you are not alone...
http://forum.videolan.org/viewtopic.php?f=12&t=64304
You can try to re "Pair' the remote also.
To pair an Apple Remote with your computer:
Hold the remote close to the computer (3 to 4 inches away) and point the remote at the front of the computer.
Press and hold both the Menu and Next buttons on the remote until the paired-remote icon appears on your screen (about 5 seconds).
To unpair an Apple Remote:
Choose Apple menu > System Preferences, click Security, and then click General.
Open the General pane of Security preferences
Click Unpair.
Carolyn
Message was edited by: Carolyn Samit

If I were to purchase the Apple Remote Desktop with Unlimited licenses, would I be able to install the client software on each of there computers/laptops and have them remote desktop into the server?

I have several friends and family who are looking for a central place to access information from ( Pictures, home movies etc ). So I am considering setting up an OSX Lion Server. There are some other things I can use it for as well.
Here is my question:
If I were to purchase the Apple Remote Desktop with Unlimited licenses, would I be able to install the client software on each of there computers/laptops and have them remote desktop into the server? Or would I have to install the Admin software on each? Do they intend it to be used strictly as one admin to access many clients?
I always could set up a network drive so they can log in and just see the folders they have created with space on the server I provide them. But I want them to be able to log an and actually use it as a Remote Desktop.
Thanks,
Eric

Dave,
Thanks for the feedback. I understand that ARD is meant for Remote Administration, but I was not sure if it could be used for my purpose as well. The reason I was looking to do it this was was because I read several articles online about security and performance issues with setting up VNC and activating screen sharing. Unless I am misunderstood.
As far as people's activities on the server, mostly it is going to be used as a place for them to store their media. I will only allow own person ( Who I trust and I know wont botch the server ), to run applications. Everyone else will be restricted to uploading and downloading content to their designated account on the server as well as a community share on the server.
I appreciate your help.
Thanks,
Eric

HEX Codes for the Apple Remote

Similar Messages

Maybe you are looking for