Hey all. I have two 22" Acer monitors that I picked up pretty cheap from A
Hey all. I have two 22" Acer monitors that I picked up pretty cheap from Amazon. Currently I run on my laptop with one of the monitors off to the right. Works pretty well but I'd like to do the following:
I wanted to set it up so that when I'm at my desk I can use an external keyboard and mouse and both of the monitors side-by-side. Basically I want to be able to just close the lid on the MacBook and use it as a CPU only when I'm at my desk.
I'm wondering what the best way is to accomplish this. I think I'd need one of those "splitters" perhaps (I think Matrox makes them, maybe others). However I'm also wondering how that would work with MBP and how easy it would be to dock and un-dock the laptop in that sort of arrangement.
Maybe this is just too difficult to get working properly but I'm thinking there has to an option.
Also, it's crazy to me that the Matrox devices are so expensive. Costs more to buy those then the actual monitors...
I suspect that most of the people using the Matrox devices are also using pretty good monitors, and are used to paying more for quality. Look at it this way: by buying cheapo monitors instead, you've saved yourself enough money to buy the matrox box you need to use them (assuming, of course, that it's compatible — about which there does seem to be some question).
Similar Messages
-
I have a MB Pro that is running Lion; I also have two external DVI monitors and a DVI splitter in hopes that I could run the two monitors with my MB Pro. This actually works fine, but I am unable to "extend" the desktop. Any insights?
You cannot have a extended desktop using a splitter. All that does is mirror the pair attached to the splitter.
You can do this however using a Matrox DualHead2Go.
Other solution would be to attach one monitor to your video out as you do the splitter and attach the other via USB (assuming the adapter supports the monitor's resolution).
Newer Technology USB to DVI / HDMI / VGA HD Video Display Adapter -
Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks. -
Hi All, I have two questions. First of all my CS3 is saying that it is installed on more than one machine, is there a way of seeing what machines my serial number is registered to? If i want to buy another CS3 serial number how do i go about it? I cannot afford to move to the creative cloud.....
there's no way for you to identify which machines have or had cs3 activated, and you can no longer purchase a cs3 license from adobe.
you can request an activation count reset (Contact Customer Care) and deactivate your cs3 on all your computers. you can then install and activate on up to two computers. -
Dear All,
we have two apple computers (iMac) in our office. Why does my colleague see my e-mail drafts? How can I change that?Dear All,
we have two apple computers (iMac) in our office. Why does my colleague see my e-mail drafts? How can I change that? -
I have a 21" Samsung monitor that needs a 1680x1050 resolution connected to a 13" MacBook Pro os 10.8.2. My display preferences do not offer this resolution. Is there an app. that will give me this resolution or other way to solve this problem. Thanks, JHM
Uninstall Genieo:
http://www.thesafemac.com/arg-genieo/
See if that makes a difference.
Ciao.
DawnHerbie wrote:
Also is Safeboot ok to use?
Yes, it will do no harm, but it is meant for trouble shooting and you should not have to use it all the time.
Message was edited by: OGELTHORPE -
I work for the County and we purchased a copy of Adobe Photoshop CS2 long ago. The person that did the order is no longer here. All I have is the CD Disk that is new but i did not know the key code is. Is there a way to get the keycode for this?
It would not work anyway. The activation servers have been retired and Adobe has provided a new CS2 download along with a new serial number for CS2 owners.
Download Acrobat 7 and CS2 products
Gene -
my ipad stopped working... all i have is a gray bar that moves from top to bottom then over again
And which update?
After you get your problems straightened out, recommend that you update to OS 10.6.8, check software update for all the other updates that goes along w/it. -
I have two songs I downloaded that are not the songs I wanted. What can I do to correct it?
Delet more content from your iphone or update via itunes on your computer.
-
Hello all,
I have a 14.88G iPod Nano that I currently use as my primary watch. A week or so ago I started to experience a blank white screen when I press the "sleep/wake" button instead of the watch face (I have it set to wake from sleep to display the clock). When I hard reset it, it will come back fine and the screen will respond and work as normal, as soon as I manually put it to sleep by pressing the "sleep/wake" button and then try to wake it the same thing happens and I have a blank white screen that doesn't respond to touch gestures or anything.
What I have tried so far to no avail:
Numerous hard restarts (holding the "sleep/wake" button with the volume - button).
Tried this: iPod nano (6th generation): Hardware troubleshooting
Changed the watch face to display.
Recharged the device overnight (without full discharge).
Since none of this works I'm out of ideas. Eventhough I have a 6G Nano it should no longer be under warranty since I was sent it as a replacement for a different (older) product.
Any ideas? Is this a known problem? Thanks in advance for any insight any of you could provide. Also, what time is it??
Regards,Hey,
I have the exact same problem as you have described. I also used my ipod as a watch but starting from today, whenever I unlock it the screen turns white until a reset is done. Even a factory reset through itunes didn't fix it.
Have you found any solution?
Bah, this is annoying.
//Gubbar -
Please help, all I have is WSDL, URI and that's it...!
I have a standalone Java application, which needs to call a webservice and several methods on that service. All I have is a WSDL file for the service, and the URI to call it. I have RAD 6, but I haven't done much work with web services. Can someone please tell me what I should be doing? I have generated two objects (a ...BindingImpl) and ...PortType, but not sure how to use them. I understand the principal of setting up a Call and Invoking it - but the WSDL stuff is confusing me!
If you want to take a look at the WSDL then please let me know and I can attach or paste etc. I have been trying (in vain) to use what I know already, i.e. the Call and invoke above, but it's not working (there is no problem with the web service itself).
Many thanks!
MattI'm new to web services but I'll provide steps working for me:
0/ Get jwdsp (http://java.sun.com/webservices/jwsdp/)
You need wscompile from that - in dir jaxrpc/bin.
1/ create config , example
<?xml version="1.0" encoding="UTF-8"?>
<configuration xmlns="http://java.sun.com/xml/ns/jax-rpc/ri/config">
<wsdl location="service.wsdl"
packageName="company.soap.service">
</wsdl>
2/ run wscompile to genrate code :
wscompile.bat -s out -keep -gen config.xml
3/ in *Stub.java set properties:
setProperty(ENDPOINTADDRESS_PROPERTY,"URL");
setProperty(USERNAMEPROPERTY, "login");
setProperty(PASSWORDPROPERTY, "password");
setProperty(SESSIONMAINTAIN_PROPERTY, true);
4/ call the service
company.soap.service.SomeServices_Impl ws = new company.soap.service.SomeServices_Impl();
company.soap.service.SomeServicesPortType wsPort = ws.getSomeWsServicesPort();
String wsResponse = wsPort.ADSLcheck(params);
</configuration> -
I have two Aperture libraries stored on an external hard drive. Using iTunes on my Mac Book Pro can I sync selected projects from both Libraries to the same iPad?
No you cannot. Each device can only be synced with one photo library - Aperture or iPhoto.
You could however merge the two libraries, if you need to sync with photos from both libraries. -
I have two Macbooks that are connected to the same Comcast Wi-Fi network modem. One of the computers has become very sporadic in receiving the WI-FI signal while the other is unaffected. Both have same operating system (10.5.8). I have restarted computer, and unplugged and retarted modem on several occassions to no avail--one still works the other inconsistent. Have spent a great deal of phone time with Comcast and they suggest acquiring latest OS. Does anyone know a solution to this problem?
This does not sound to be a router problem...You should try to uninstall and re-install the ethernet adapter/card installed in your computer...Do you have 2 Ethernet Adapter's by any chance...Check the Device Manager, Click on the Start button >>> Settings >>> Control Panel >>> Double click System, go to Hardware >>> Device manager, click on the plus'+' sign next to Network Adapters and see how many Ethernet Adapters are listed...
Also connect that computer straight to your modem and see check if you get the same message,that 'YOU ARE CONNECTED TO MORE THAN ONE NETWORK'... -
help
OK, try this: First make sure that all anti-virus software & any firewalls are completely turned off...nothing running. Then do the following:
Turn your phone off...in your case, it's already off, so proceed: Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. -
Please help. Is there any other way to reset to factory settings without the disks.
You need the original installation disks specific for each machine or compatible Mac OS X retail disks which you can buy on eBay or from several dealers.
To see which OS X you can use go to thse links and look up the specs on your iBooks.
http://www.everymac.com/
http://mactracker.ca/
Links to sources.
http://www.welovemacs.com/apsyso.html
http://hardcoremac.stores.yahoo.net/
http://www.buycheapr.com/us/result.jsp?ga=us14&q=leopard+10.5+os+x#
http://store.fastmac.com/index.php?cPath=10_5_6
http://oldermac.hardsdisk.net/oldmac.html#hard
http://rescuemyclassicmac.com/index.html
http://www.pure-mac.com/appud.html
http://lowendmac.com/2013/classic-mac-os-downloads-and-updates/
Maybe you are looking for
-
My iPad is slower with iOS 8.0.2 and the battery last lesser than before. Is there any solution for that? Thanks
-
Why is my iPhoto Library duplicating photos
why is my iPhoto library duplicating photo's, sometimes 3 times ?
-
HI Gentlemen, On my 9i DB, 9i DS when I uninstalled JInitiator 1.3.9 through the Control Panel, I could start OC4J Instance (JInitiator was automatically installed when I typed "Yes"). However, when I shut down OC4J Instance, exited from XP and then
-
Diagnostics Workload Analysis - Java Memory Usage gives BI query input
Dears I have set up diagnostics (aka root cause analysis) at a customer side and I'm bumping into the problem that on the Java Memory Usage tab in Workload analyis the BI query input overview is given Sol Man 7.0 EHP1 SPS20 (ST component SP19) Wily I
-
So premiere allows you to use the crop effect, or crop the video during the exporting (on source you can delete pixels on top and bottom). But this only adds black bars to the video, the video is still physically a 16:9 video, just with black. How ca