Hey all, new here, some bootup issues.

I am running Windows 7 with 2 hard drives, one is just an extra one that I use to store pictures on, and one is my main. Neither are SSD. I installed Ubuntu alongside my 7, then later I deleted the partition with Ubuntu on it and want to just use Windows 7 again. I went through with my install disc and repaired my bootloader, and it works, but now it is hanging on 99 for about 3 or 4 minutes before it finally goes on through to A2 where it boots no problem at all. I have not been able to get into the BIOS. How can I circumvent this 99 and get it to boot in about 10 seconds again instead of 10 minutes? Thanks in advance.
Z77A-G43 with I3-2120.

Quote
do you need to remove the on-board jumpers to overclock if you are trying to achieve over 1600 Mhz FSB? I currently have the jumpers off.
Removing the jumpers will set the FSB Frequency to 400 MHz and force the system into a default-400 MHz Strap. You should also be able to overclock manually in BIOS starting from other jumper position. Just test and see which one works best for you. It may be the default position or the 400 MHz position (jumper removal).
Quote
2. I've notice that the GTLREF voltage is not within 63% of the CPU VTT using the latest beta bios A7512IMS.153 [v1.5b3]. Is that right?
How did you notice that? What percentage does the BIOS set in your case?
Quote
3. Anyone have any experience using the RAM modules I have? See sig for details.
That is more or less standard DDR2-800 memory which should not make any problems. In terms of overclocking it, you have to see what can be achieved. Memory OC Results usually vary from system to system.
Quote
4. Green Power Center crashes in Vista when making changes. Is there a unknown compatibility issue? I've have installed fresh copy of Vista.
Are you using the latest version?

Similar Messages

Hello all, new here to MSI, some overclocking questions

Hey everyone, new here to MSI products (a mobo, P45 Platinum) and forum. I recently came from the 680i chipset and decided to try out these P45. From reading a lot of things from various forums and here at https://forum-en.msi.com/index.php?topic=119345.0, it seems that there is a challenge (and the rewards !!) to overclocking the P45.
In any case, my questions are:
1. I know this has probably been answered somewhere but I've yet to concisely concluded, do you need to remove the on-board jumpers to overclock if you are trying to achieve over 1600 Mhz FSB? I currently have the jumpers off.
2. I've notice that the GTLREF voltage is not within 63% of the CPU VTT using the latest beta bios A7512IMS.153 [v1.5b3]. Is that right?
3. Anyone have any experience using the RAM modules I have? See sig for details.
4. Green Power Center crashes in Vista when making changes. Is there a unknown compatibility issue? I've have installed fresh copy of Vista.

Quote
do you need to remove the on-board jumpers to overclock if you are trying to achieve over 1600 Mhz FSB? I currently have the jumpers off.
Removing the jumpers will set the FSB Frequency to 400 MHz and force the system into a default-400 MHz Strap. You should also be able to overclock manually in BIOS starting from other jumper position. Just test and see which one works best for you. It may be the default position or the 400 MHz position (jumper removal).
Quote
2. I've notice that the GTLREF voltage is not within 63% of the CPU VTT using the latest beta bios A7512IMS.153 [v1.5b3]. Is that right?
How did you notice that? What percentage does the BIOS set in your case?
Quote
3. Anyone have any experience using the RAM modules I have? See sig for details.
That is more or less standard DDR2-800 memory which should not make any problems. In terms of overclocking it, you have to see what can be achieved. Memory OC Results usually vary from system to system.
Quote
4. Green Power Center crashes in Vista when making changes. Is there a unknown compatibility issue? I've have installed fresh copy of Vista.
Are you using the latest version?

Hi all new here, am just learning and when i activate the dodge or burn symbol i click over the area to be worked and my Mac freezes. only in the elements software. if i go out of elements i cannot get back in and have to force a software close, any sugg

Hi all new here, am just learning and when i activate the dodge or burn symbol i click over the area to be worked and my Mac freezes. only in the elements software. if i go out of elements i cannot get back in and have to force a software close, any suggestions and please help

Please post Photoshop Elements related queries over at
http://forums.adobe.com/community/photoshop_elements

Hi all new here. Newb question...can this be done with flash?

Hi everyone hoping you can help a newb like me out. Thanks in advance for your time. I am trying to make a video exactly like this.
http://www.youtube.com/watch?v=UbMOTNI8tcE
I know in the video it implies he uses a light control thing but I think he is really just animating the cartoon. I just want to animate a "line cartoon" like this one. Can I do this in flash? Its not for a website just like a movie type thing. I have access to pretty much all the other adobe software at my school so if I need to use a different program I can do that. Just looking for someone to point me in the right direction and maybe give some tips on how to go about it. Thanks.

open flash and you'll see a timeline with frames (that are all empty when you start). draw something on the stage. that will be in frame 1. right click on frame 10 and click insert keyframe. your drawing will be in frame 10 now. double click your drawing to select all of it, move your mouse off and then over the select drawing and then drag it to the right and release. right click between frame 1 and frame 10 and click motion tween. test your movie.
now start playing with flash to see what you can do. you're not going to learn how to create your animation by asking questions.
you can get help getting started but you now have enough info to get started. you can get more help if and when you encounter problems.

I have a itunes 11, iMac, iPad sync issue... all new kit, the itunes library and photos are on a networrk drive but syncing is useless, no music, no photos, no video, sometimes music and videos may be visible but greyed out on the ipad....

This is my first posting so sorry for the messy title... I didn't realise how it all worked here.
I have a shiny new imac, shiny new ipad and have all my media on a network hard drive - itunes works fine on the mac - no problems - photos visible in finder and photoshop - no problems, but when I come to sync the new ipad - several things may happen (I have tried many times now)
1) a long wait - whirly gig round spinner thing - then music visible on the ipad but greyed out and useless
2) no photos at all synced
3) no videos synced
4) info syncs ok
5) apps seem to have synced OK
It is not a data size issue as the same amount of data synced before the new kit from my old windows pc on to an iPod - I daren't try syncing the ipod as I need it for my next business trip.
I tried removing the ipod cache files for the photos - no difference - I tried restoring the ipad - no difference
Have I completely wasted a large amount of money?

ps when syncing it jumps through steps 1 - 4 real fast, i seem to remeber iphone showing the number of tracks transferring and names, but i see nothing? then it sits on 5 saying "waiting for changes to be applied"

Are all New iPad facing the same overheat issue? My new iPad also feels warm at the back.

Are all New iPad facing the same overheat issue?
My new iPad (wifi 64G) also feels warm at the back.

It varies. The difference between 'warm' and 'hot'. As in warmer but I can touch it vs too hot to comfortably handle.
ANd it doesn't seem to be all new iPads. There does seem to be increased heat because of the different battery and the retina display as explained above. There also seems to be some of them - maybe a few from a singular batch/factory that seem to put out what has been termed excessive heat. I would think if it were a universal issue then there'd be something more aggressive being done.
You can always take it into your local apple store and have them look at it and document that you have a concern, but they may say it's just normal heat associated with the prettier display and new battery configuration.

[svn:fx-trunk] 5367: The changes here are mostly fixing some sizing issues.

Revision: 5367
Author: [email protected]
Date: 2009-03-17 15:26:35 -0700 (Tue, 17 Mar 2009)
Log Message:
The changes here are mostly fixing some sizing issues.
For the FlashContainerPlaceholder, the first child is now MyFlexContentHolder, which extends mx.flash.FlexContentHolder but meets the invariant that it has 1 child and that child is FlexContentHolderThumbnail, which I?\226?\128?\153ve added as a swc to the project. I changed this by accident last time to refer to mx.flash.FlexContentHolder, when it should've referred to a concrete instance created by Flash from a swc. I also added a chrome of 151x151 to match the FlexContentHolderThumbnail since otherwise the container itself would have no chrome at all, and this let?\226?\128?\153s it size correctly.
Also, for sizing, in a container, rather than sizing to the size of the chrome, I now size to the size of the FlexContentHolder thumbnail that all FlexContentHolder?\226?\128?\153s have. This means in ContainerMovieClip, I don?\226?\128?\153t need to override bounds anymore.
ContainerMovieClip now implements IVisualElementContainer.
Also, I fixed a resizing event bug in UIMovieClip where the resize event was getting dispatched more than once.
QE Notes: -
Doc Notes: -
Bugs: SDK-19271, SDK-19788, SDK-19789
Reviewer: Glenn
tests: checkintests
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-19271
http://bugs.adobe.com/jira/browse/SDK-19788
http://bugs.adobe.com/jira/browse/SDK-19789
Modified Paths:
flex/sdk/trunk/frameworks/projects/flash-integration/src/mx/flash/ContainerMovieClip.as
flex/sdk/trunk/frameworks/projects/flash-integration/src/mx/flash/FlexContentHolder.as
flex/sdk/trunk/frameworks/projects/flash-integration/src/mx/flash/UIMovieClip.as
flex/sdk/trunk/frameworks/projects/utilities/build.xml
flex/sdk/trunk/frameworks/projects/utilities/src/FlashComponentPlaceholder.as
flex/sdk/trunk/frameworks/projects/utilities/src/FlashContainerPlaceholder.as
Added Paths:
flex/sdk/trunk/frameworks/projects/utilities/libs/
flex/sdk/trunk/frameworks/projects/utilities/libs/FlexContentHolderThumbnail.swc
flex/sdk/trunk/frameworks/projects/utilities/src/MyFlexContentHolder.as

Hello Everyone,
We request you all to try your applications with http://labs.adobe.com/technologies/flashplatformruntimes/air3-5/
Release Notes - http://labsdownload.adobe.com/pub/labs/flashplatformruntimes/shared/air3-5_flashplayer11-5 _releasenotes.pdf
Please let us know how it goes.
-Thanks
Pahup

Hi, I had recently purchased ipad3 and but obviously have been having issues with heating up and some minor issues with video playback etc. Apple has agreed to replace my device. I need help in deciding whether i should get a new ipad3 or opt for ipad2.

Hi, I had recently purchased ipad3 and but obviously have been having issues with heating up and some minor issues with video playback etc. Apple has agreed to replace my device. I need help in deciding whether i should get a new ipad3 or opt for ipad2. Seller is willing to replace it with ipad2 as well..
Have also heard that the ipad3 revamped version is around along with the mini pad rumor..too much information - lot's of confusion pls help

Lindsay,
Your iBookG4 is still a pretty awesome Mac. Like already said, it has the power to run Leopard, but it depends if you have an internal DVD drive.
Then I suppose you have to add up the cost of the OS, perhaps another 512MB RAM, iLife 08 and replacements for any favourite apps that you currently use (Leopard breaks a lot of stuff, but Intel breaks even more). Compare it to the cost of a new MacBook, which wil have all of that included and be 3-4x faster too.
It also depends on what you want to achieve with your iBook. My PMG4 still cuts it today, I still use it in preference to my new Mac Pro, It's about the same age as your iBook, and I'll only stop using it when it becomes "painfully" slow. My 1 year old son currently uses the Mac Pro (parts for a Mac Pro are easier to replace than those for a PMG4).
I think your choice is simple, if you can a cheap copy of Tiger, use that, it'll get your iPod Touch up and running. It came in DVD and 4 CD version (by request).
Leopard will work for you too but a lot of the best eye-candy requires quite a meaty graphics card and you may need a RAM upgrade and replacement software - OS9 Classic is not supported in Leopard.

My daughter accidentally deleted her texting app off of her i-pod 4th generation. Is there a way to get it back? Or, is the there a way to re-install or install a new one. The issue seems to be not being able to load a newer ios.

My daughter accidentally deleted her texting app off of her i-pod 4th generation. Is there a way to get it back? Or, is the there a way to re-install or install a new one. The issue seems to be not being able to load a newer ios.

Hello rkoslosky,
Welcome to the Apple Support Communities!
I understand that you are not able to locate the Messages application on your daughters iPod touch (4th generation). The good news is that this application cannot be deleted or restricted. The first suggestion I have is to try and search for Messages using Spotlight to search the iPod touch for this application. If Messages is located in Spotlight, then it has probably been moved to a different page of applications or even possibly a folder of applications on the device. Searching all pages will help you locate it.
Search with Spotlight - Apple Support
Have a great day,
Joe

New to iCloud - Some Privacy Issues!

Hello,
I've just updated to iCloud from MobileMe.
I have a Macbook Pro, an iPhone 4 (IOS 5) and an Ipad 2 (IOS 5).
My MBP has two users with seperate accounts (myself and my girlfriend), log ins and passwords. I am 'admin' on the MBP and my GF doesn't use iCloud.
When I open iCal now my calender syncs between devices as it should but now I can see my GF's calender entries. This happens across all devices. Also when she logs into her account on the MBP my me.com email address automatically loads on Mail and she can see all my mail.
None of this happened before I started using iCloud.
Is this a known issue or have I done something wrong/missed something?
Cheers!

Thank you Roger.
You're right she, somehow, was signed into iCloud under my Apple ID. The only box checked however was mail hence why my emails were showing up on her log in.
The problem with iCal remains.
I am still able to see all of her calender entries on all my devices.
Any further thoughts?

I share a macbook with my other half and we both use it for our iphones. When syncing using the new software I now have all of her and my contacts on my phone. I don't want her contacts! How do I get rid?

I share a macbook with my other half and we both use it for our iphones. When syncing using the new software I now have all of her and my contacts on my phone. I don't want her contacts! How do I get rid?

Hi,
You have 2 solutions:
1 - You can use 2 differents icloud account
2 - You use the same account but you don't sync yours contacts.
You configure that in Settings > icloud
You activate or desactivate what you want.
Have a nice day.

HT204053 My wife currently has two different apple accounts as we changed our email address plus got a new computer. I believe that all of her info is under her old email address plus on the old computer. how can we merge the two accounts

My wife currently has two different Itunes account as one is on the old computer with our old email address, Instead of changing the email address on the old account we created a new itunes account with her new gmail address. I just updated the new update for her iphone however I cannot get her contacts etc moved to the new phone as I believe they are all on her old account. It says I need as well to authorize this computer for the itunes store as well but in her account it says one computer authorized (old one) but cannot figure our how to get the new computer authorized as well.

You should be able to authorise the account via the Store drop-down menu at the top of iTunes (if you are using iTunes 11 on a PC then control-B should get the menus to show)
e.g.

I bought iPhone 4 for my wife, didn't create a separate apple ID account for her at that time. How can I now create a new one for her, sync her phone to the same PC that I sync my iPhone with without loosing all of her data, contacts, etc. Please help!

I bought iPhone 4 for my wife, didn't create a separate apple ID account for her at that time. How can I now create a new one for her, sync her phone to the same PC that I sync my iPhone with without loosing all of her data, contacts, etc. Please help!

I bought iPhone 4 for my wife, didn't create a separate apple ID account for her at that time. How can I now create a new one for her, sync her phone to the same PC that I sync my iPhone with without loosing all of her data, contacts, etc. Please help!

IPad mini now terrible to use, apple support no help because warranty is up. All cause by new ios8 update, wifi issues, many apps no longer work, apps that do work now crash regularly and sometimes take several instances and reboots to even open.

IPad mini now terrible to use, apple support no help because warranty is up. All cause by new ios8 update, wifi issues, many apps no longer work, apps that do work now crash regularly and sometimes take several instances and reboots to even open.

need help uninstalling ios8 and going back to 7 where things worked please.

I Am New Here/Need Some Help

Hello, I am new here. I really do not know if there are any rules here and how to find my way around here.
I have been learning Java since November of last year on my own since my school does not provide any classes. I mostly make applet games for fun.
Is there any parts of the forums here that are specifically for games and applets? I could not find any, but read in another post that there was one. He did not provide a link.
I was searching the Internet on Graphics2D to see how I can make only a part of my images appear and how to repeat tiles I make for games. When I make a game, I put the map together in MS Paint by copying and pasting tiles. I was told that I could actually repeat it in a way where I could arrange the tiles by code without having to put it together in MS Paint.
I also learned that it is better to load one image instead of a bunch so I want to put my animation as one image and only have a clip of it show.
I was curious if it possible to make things transparent, too? like if I wanted a ghost in my game.
I want to be a pro at making games with Java in a couple of years from now. I have made a couple of 2D graphical games already, but they had a lot of mistakes with them such as no game loop, the stuff I mentioned above, heavily using AWT, move by key instead of mouse, coding all into one class (messy in the end), stuff like that. So I am hoping by talking with other Java programmers here, I will get better at making games.
Thanks for helping in advance.

Is there any parts of the forums here that are
specifically for games and applets? I could not find
any, but read in another post that there was one. He
did not provide a link.http://forum.java.sun.com/forum.jspa?forumID=406
It's on the main forums list.
I was searching the Internet on Graphics2D to see how
I can make only a part of my images appear and how to
repeat tiles I make for games. When I make a game, I
put the map together in MS Paint by copying and
pasting tiles. I was told that I could actually
repeat it in a way where I could arrange the tiles by
code without having to put it together in MS Paint. Yes you can, but AFAIK there's no API given in core Java to do this for you. I'll bet someone has written one though -- try Google. Also MIDP 2.0 (for J2ME) has an API to do stuff like that. I've used it; it's pretty good.
I also learned that it is better to load one image
instead of a bunch so I want to put my animation as
one image and only have a clip of it show. Yeah, you can load an image and then use a Graphics.drawImage method to select only a subset of that image.
I imagine that there may also be images that create image objects out of clips of larger images, but if so I don't know what they'd be. Check the docs.
I was curious if it possible to make things
transparent, too? like if I wanted a ghost in my
game.Yeah. Create an image with an alpha channel. MS Paint probably can't do that, but Photoshop can easily, and so can GIMP, which is a free, open-source, Photoshop-like image editor.
So you can create a PNG image with certain parts either fully or partially transparent, then you could load that image into Java easily, and use it (or subsections of it) as sprites in a game.
Try the games forum. There's also stuff like this: http://community.java.net/projects/topic/Games

Hey all, new here, some bootup issues.

Similar Messages

Maybe you are looking for