Hey Apple. Expand the iPod Sport Kit to other running shoes.

I'm a runner and used to use Nike products up until I started having severe feet and ankle problems. That's when I found out that Nike shoes are all wrong for my feet mainly because I have a 4E wide foot. Nike never has and never will make a shoe for wide feet because they're shoes are made in sweat shops in Indonesia. I now run in New Balance and have been finding out a lot more distance runners use New Balance over Nike. I have looked at the iPod Sport Kit and like what I see but I will never put it to use as long as it only works with Nike shoes. I understand why Apple chose Nike because Nike is the more the popular shoe on the market. But Apple needs to begin expanding the iPod Sport Kit to work along with other brands of shoes other than Nike. So Apple please expand the iPod Sports Kit to other brands of shoes. I'd really love to use it with New Balance shoes.

I have the marware pouch too but I'm having problems with accuracy. Since switching from the Nike+ sneakers (also don't fit my feet) to using the pouch on non-Nike sneakers, my iPod tells me I've run 25-30% less than the actual distance (anywhere from 0.25 to 12 miles). Trying to recalibrate gives me a message that I haven't run the calibration distance yet (still 25-30% short). Any insight?
(Note: The sensor is not in upside down.)
PC   Windows 2000  

Similar Messages

  • IPod Video and Nike + iPod Sport Kit

    Does the sport kit work with the video ipod? If not, id there going to be a new version to use with it?

    The fifth generation's iPod firmware does not work with the iPod sport kit, possibly because the hard disk on that model of iPod is much more vulnerable to the iPod being dropped than the iPod nano's flash media is.
    (14900)

  • I have a 7th generation nano, and am interested in the Nike   Ipod sport kit.  However, it looks like the kit only works with older nanos with the 30 pin connector.  What kit or what accessory do I need to utilize the Nike   ipod sport kit fuctionality?

    I have a 7th generation nano, and am interested in the Nike + Ipod sport kit.  However, it looks like the kit has a 30 pin connector on the receiver and the 7th gen nano is a lightning connector.  Not sure if the kit will work.  What kit or what accessories do I need to utilize the Nike + ipod sport kit fuctionality in the 7th gen nano?  Do I just need a separate sensor and/or a heart rate monitor? Or is there a kit available for 7th gen nanos?

    Hey SeanW89,
    Thanks for the question. The iPod nano 7th generation has bluetooth functionality that can connect to the Nike+ sensor. You do not need to purchase the USB kit, but rather just the sensor itself:
    Nike + iPod Sensor - Apple Store (U.S.)
    http://store.apple.com/us/product/MA368LL/E/nike-ipod-sensor
    iPod nano (7th generation): Frequently used features
    http://support.apple.com/kb/HT5470
    Connect to Bluetooth accessories
    You can connect your iPod nano to compatible Bluetooth headsets and other accessories, including some hands-free systems in newer cars. You can also connect to a Nike+ sensor or a Bluetooth heart-rate monitor. iPod nano supports A2DP for audio streaming and AVRCP for controlling playback on Bluetooth devices.
    Note: FM radio will not play through a Bluetooth accessory.
    Thanks,
    Matt M.

  • Does 6th Gen iPod Nano need the Nike + Sports Kit?

    I have the Nike+ sensor with my Sports Band. To use it with the new 6th Gen Nano, do I have to get the sports kit? Or is this feature built in like the iPhone 3GS and 4? The attachment to the new nano will make the form factor ugly.

    Hi toffeepup,
    As cocon said, you will need the receiver. Here are some of the references...
    Based on the iPod nano Specifications page it looks like you will need the Nike + iPod Sport Kit (with the receiver) for the new nano.
    From the bottom of that page, under "Which iPod are you?" it says, "Nike + iPod support".
    Compare that to the iPod touch which says, " Nike + iPod support built in".
    Also, from Rock and Run
    "Then connect the receiver to your iPod nano. iPod touch, iPhone 3GS, and iPhone 4 include built-in support for Nike + iPod, so no receiver is necessary."
    Note it does have a built in pedometer, and based on the Features page you can upload that to the Nike+ website. Not sure if that's enough for you.
    ivan

  • TS1484 Will a Nike + IPod sport kit sensor work with a 4s IPhone?

    Will a Nike + IPod sport kit sensor work with a 4s IPhone?

    I dont doubt your claim of 55-75 hours of usage
    solely on running since january. Even though you say
    that it has died prematurely with the range of hours
    you give since the time you purchased the sensor.
    I must ask if you were concious of turning off
    the sensor when it was not in usage. You know
    hitting that little button on the sensor itself to
    deactivate the battery. If your answer is no that you
    never remembered to turn off this sensor then. Your
    idea that it has died prematurely is bad. Because
    without physically turning off the sensor itself
    (thats the portion in the sole of the shoe) then it
    has been on 24/7 since you purchased it in january.
    Now if you have remembered to turn off the sensor
    after each run then it might have died prematurely.
    IF thats the case I would contact apple or the place
    from which you purchased it and ask for some help
    regarding the sensor.
    GFF:)
    Umm, no: From the FAQ
    "The sensor’s battery has a life of more than 1000 active hours. The sensor has a sophisticated built-in power management system which means that the sensor really only consumes power when active (that is, when it senses motion)."
    Mine is now showing the low battery indicator at 277 hours. I'm not the only one with premature battery failure.
    http://forums.nike.com/message.jspa?messageID=85240
    http://forums.nike.com/thread.jspa?threadID=6102&tstart=0
    There are more threads (just search on "sensor battery").
    This should be covered by the warranty. Can someone from Apple please respond to this thread?

  • IPod Sport Kit and Racewalkers

    I'm trying to decide if the Nike+iPod Sport Kit will work for me. I'm a racewalker and have custom made shoes. Do you have to embed the sensor into the insole of your shoe or can you somehow attach it to the laces on top? I do a fair amount of road miles but don't always know the distance and speed of my workouts.
    PC   Windows XP   iPod Nano

    Do you have to embed the sensor into the
    insole of your shoe or can you somehow attach it to
    the laces on top?
    Much discussed topic on the forum. Go to this thread: http://discussions.apple.com/thread.jspa?messageID=2724034&#2724034
    Until I get my Nike+ shoes, I have cut a slit on the inside of the tongue on my Asics (just above where the tongue attaches to the shoe). Works just fine. You need to experiment.

  • Can I modify the frequency of the Nike+Sport Kit Notifications?

    When I set my Nike+Sport kit on the Time setting, it give me an update every 5 minutes. When running for 180 minutes, every 5 minutes tends to be very annoying. Is there a way to modify the notification setting? Say every 30 minutes instead of every 5 minutes?

    You might get a better response from folks who use this if you post in the Nike/sport kit forum here.
    http://discussions.apple.com/forum.jspa?forumID=1123

  • Calibrating the Nike+ Sports Kit.

    After a couple of tries I think I got it now. The information that gets sent to iTunes and nikeplus.com is right, yet -- on the iPod nano itself window --, although the time and pace are correct (in History), the distance is not.
    I'll check this out at the nike site but their discussion groups are not so good.

    Hi toffeepup,
    As cocon said, you will need the receiver. Here are some of the references...
    Based on the iPod nano Specifications page it looks like you will need the Nike + iPod Sport Kit (with the receiver) for the new nano.
    From the bottom of that page, under "Which iPod are you?" it says, "Nike + iPod support".
    Compare that to the iPod touch which says, " Nike + iPod support built in".
    Also, from Rock and Run
    "Then connect the receiver to your iPod nano. iPod touch, iPhone 3GS, and iPhone 4 include built-in support for Nike + iPod, so no receiver is necessary."
    Note it does have a built in pedometer, and based on the Features page you can upload that to the Nike+ website. Not sure if that's enough for you.
    ivan

  • IPod Classic and Nike + iPod Sport Kit

    Will an iPod Classic work for the Nike + iPod Sport Kit?
    Why does the Nike + iPod Sport Kit only work for iPod Nano and iPod Touch?

    Will an iPod Classic work for the Nike + iPod Sport Kit?
    No.
    Why does the Nike + iPod Sport Kit only work for iPod Nano and iPod Touch?
    Only those iPods contain the firmware needed to use it, likely because iPods with a hard drive such as the iPod classic are much more vulnerable to drops and other hard impacts than iPods which use flash media.
    (43864)

  • Nike+ iPod Sport Kit for my personal workout and running.

    I bought a Nike+ and I already have a iPod 5th Gen. with video and 80GB(which I love). Is there a software available to make the two compatible or is the Nike+ still only able to work with the iPod Nano? What should I do ?

    Will an iPod Classic work for the Nike + iPod Sport Kit?
    No.
    Why does the Nike + iPod Sport Kit only work for iPod Nano and iPod Touch?
    Only those iPods contain the firmware needed to use it, likely because iPods with a hard drive such as the iPod classic are much more vulnerable to drops and other hard impacts than iPods which use flash media.
    (43864)

  • Ipod sport kit don't work on touch first generation

    Hi guys. I am new and I would ask a question. I have a ipod touch 1° gen and I have buy ipod sport kit, but in the general menu I do not have the specific menu for sport kit? can you help me? thanks and bye.

    The first generation iPod touch doesn't have the hardware components needed to use it. There is no way to get it to work. Sorry.
    (44933)

  • Dock + Remote apple in the ipod 3g reset while viewing videos

    Hello.
    I have the following problem is my ipod nano 3g 1.1.3 connected to the dock of apple and driving with the remote apple.
    The problem is that the iPod is reset when you press forward or play / pause while playing videos, I have tested with the podcast "Apple Special Event, October 2008", the reset is random.
    Any idea? in support of apple I have sent this url, but I have not managed to solve the problem http://support.apple.com/kb/TS1517?viewlocale=es_E
    the iPod is connected to the apple tv composite video
    Os the functional dock + apple + remote video components with the iPod nano 3g, when playing videos? are you reset the ipod?
    Thank you very much.

    This rather depends on whether it broke because it was faulty - in which case it would be covered - or it broke because it was damaged - in which case it most likely wouldn't be.
    In any event the best thing would be to deal with Apple directly. Please see this page:
    http://www.apple.com/support/ipod/service/faq/#repair2
    and please particularly note the caveats in section 3 about not retaining the data and the possibilty of a replacement having a later OS.
    Also please note http://www.apple.com/support/ipod/service/faq/#warranty5

  • HT4356 My printer, Epson Stylus Office TX600FW, is not listed on the AirPrint. How to add it? Would Apple expand the list?

    My printer, Epson Stylus Office TX600FW, is not listed on the AirPrint. I can't find it on my iPad or iPhone. How to add it? Would Apple expand the list?

    Only the printer manufacturer can make it compatible with AirPrint, it's not up to Apple. You could try Epson's iPrint app, that claims to support that model :
    http://itunes.apple.com/us/app/epson-iprint/id326876192?mt=8

  • Apple send the iPod 4 gen the ios7 update so you could prove to us it can't handle it

    Apple send the iPod 4 gen the ios7 update so you could prove to us it can't handle it

    That is a nonsensical request. If it could be installed then that would not prove that it could not be installed.
    Ry-ry.c wrote:
    Apple send the iPod 4 gen the ios7 update so you could prove to us it can't handle it

  • I didn't receive my return box from Apple for the iPod Nano replacement as promised within 2 working days, did anyone else?

    I didn't receive my return box from Apple for the iPod Nano replacement as promised within 2 working days, did anyone else?

    UPDATE. Just spoke with an AppleCare representative, Apple has been inundated with requests for these iPod Nano replacements.  They have fallen behind with sending out the return boxes in the 2 days they promised.  I was told to wait an additional 2 days.  She also said they were very surprised so many people still have their 1st generation nanos...
    We have been an Apple family for years and trust they will do the right thing, they have always surprised us with their professional customer service and expect this situation to be the same.

Maybe you are looking for

  • R12 API for Payment Method Update at supplier site

    Hi I am using api AP_VENDOR_PUB_PKG.Update_Vendor_Site to update the Payment Method at Supplier Site level. The below code executes with no error but dont update the payment method. The requirement is to update the payment method to SEPA Code : DECLA

  • Get data to standard wd component

    Hi all experts, Could you help me please, I have a requirement, extend a web dynpro component ( WebDynpro Component /SAPSRM/WDC_UI_DO_HISTORY and View V_DODC_HISTORY )with 2 coloums, the either is 'PurchOrg'. Can you tell me, where can I find this da

  • How to create report designer report

    Hi all, can u tell me how to create report designer report in sap bi can u send me any detailed links how to work on report designer. regards, naveen

  • Upload documents to filenet p8 for sap objects from SAP

    Hi.. Appreciate if anyone can let me know the process of uploading documents to Filenet P8 from SAP for relevant SAP objects. This will also create the link to object and document in the SAP LINK tables.. Any documents are urls related to this topic

  • How to add component dynamically to datatable row?

    Hi, I have a dropdown in one column of table.Depending upon selected value in that dropdown, I want to add some components dynamically only in that row.How to do this? I have seen that findComponent() method doesnt accept clientId.Is there any other