Hey Folks, can anyone help me with DB2 V9 admin guide
Hyey Folks,
I need DB2 V9 administration guide and
also ZOS admin guide so that I can start work with SAP DB2 ZOS.
Thanks,
Sandeep
Hi:
This link can help
DB2 for z/OS - List of all documents [original link is broken]
and the reedbooks:
http://www.redbooks.ibm.com/abstracts/sg247239.html?Open
http://www.redbooks.ibm.com/abstracts/sg246489.html?Open
http://www.redbooks.ibm.com/abstracts/sg247644.html?Open
Similar Messages
-
Hey, when I connect either my ipod or ipad to itunes I get the prompt 'itunes was unable to load data class information from sync services. Reconnect or try again later. Can anyone help me with syncing my devices?? Thanks in advance
I am having the same issue, anyone else ?
-
Hey,I've got a problem on my iPad mini for a few days now?My iPad is in recovery mode at the moment and I Cannot restore my Ipad with iTunes...Can anyone help me with the solution?Each of your helps will be appreciate...Thanks for all the helps...
Follow step 1 to 6 closely to recover your iPad.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times -
Can anyone help me with a bit of script modifying?
Hey guys, can anyone help me?
Here is some script that makes my character obviously move
and detects walls. I would like to modify the script so that when
my character hits the right keydown, the sprite changes to cast
member "right". I have tried and so far all i have done is succeed
in making the cast member change but this then deactivates the
walls. Any ideas??
on exitFrame me
if keyPressed(123) then
move(me,-5,0)
end if
if keyPressed(124) then
move(me,5,0)
end if
if keyPressed(125) then
move(me,0,5)
end if
if keyPressed(126) then
move(me,0,-5)
end if
end
on move me, dx, dy
oldRect = sprite(me.spritenum).rect
newRect = oldRect + rect(dx,dy,dx,dy)
hitWall = FALSE
repeat with i = 2 to 30
if sendSprite(i,#hitWall,newRect) then
hitWall = TRUE
exit repeat
end if
end repeat
if not hitWall then
sprite(me.spriteNum).loc = sprite(me.spriteNum).loc +
point(dx,dy)
end if
end
Many thanks.Hi Hayz,
I actually recognise that script.
Try the following:
on exitFrame me
if keyPressed(123) then --left
move(me,-5,0,1)
end if
if keyPressed(124) then -- right
move(me,5,0, 2)
end if
if keyPressed(125) then -- down
move(me,0,5, 3)
end if
if keyPressed(126) then -- up
move(me,0,-5, 4)
end if
end
on move me, dx, dy, directionMove
-- get rect and add change to it
oldRect = sprite(me.spriteNum).rect
newRect = oldRect + rect(dx,dy,dx,dy)
case directionMove of
1: (sprite(me.spritenum)).member = member("character_left")
2: (sprite(me.spritenum)).member = member("character_right")
3: (sprite(me.spritenum)).member = member("character_down")
4: (sprite(me.spritenum)).member = member("character_up")
end case
-- loop through possible wall sprites and detect collisions
hitWall = FALSE
repeat with i = 2 to 30
if sendSprite(i,#hitWall,newRect) then
hitWall = TRUE
-- insert collision instructions here
exit repeat
end if
end repeat
-- if no collision, then move sprite
if not hitWall then
sprite(me.spriteNum).loc = sprite(me.spriteNum).loc +
point(dx,dy)
end if
end
And remember, the sprites that you're colliding with need
their own behavior with:
on hitWall me, objRect
if intersect(sprite(me.spriteNum).rect,objRect) <>
rect(0,0,0,0) then
return TRUE
else
return FALSE
end if
end
regards
Dean
Director Lecturer / Consultant / Director Enthusiast
http://www.fbe.unsw.edu.au/learning/director
http://www.multimediacreative.com.au
email: [email protected] -
Can anyone Help me with SEM-BCS, SEM-CPM ,SEM-SRM Tcode list.
Hi,
How are you folks ?. Can anyone help me with the SEM tcodes.
Thank you.Most of SEM BCS tcodes start with UC***
Most frequetly used SEM BCS tocdes are
UCWB,
UCWB_INT,
UCWB01,
UCWB02,
UCMON
For the whole list I beleive you can go to SE80 and search by module?!. -
Hey. Can anyone help me? Have only a few weeks ago bought me my first computer from Apple. Precise a Macbook. I also bought a Time Capsule - 2 TB which I prefer to use to connected me to the internet. My Time Capsule is connected to my wireless modem through the LAN port of the wireless modem and the "internet port" for Time Capsule.
I am happy with this setup, but wondering if anyone can give me some advice regarding the use of the wireless network connection that I already had in place before I was able to purchase new. Should I turn off the wifi feature on my wireless modem to avoid two signals from two different network connection. Or is this unnecessary to me.
Using the old network connection to the internet for my electrical devices with WiFi access. And am unsure if I manage to switch to the new wireless network connection on my electrical devices with WiFi access. Please let us know if any of my explanations are difficult to understand since I do not write in my mother tongue.Should I turn off the wifi feature on my wireless modem to avoid two signals from two different network connection. Or is this unnecessary to me.
Yes and no.
Two wireless networks in close proximity to each other can create possible interference that will affect the speed and reliability of your wireless connection, so it is usually a good idea to turn off the wireless function on one wireless router.
However, if you do not notice any problems, it will not hurt to leave the wireless signal in place on the other wireless router. -
can anyone help me with Magicjack? after I purchased US number I am unable to log in on my Iphone, I keep getting an error "YOUR DEVICE IS NOT ON THIS ACCOUNT" I contacted MJ support but they are very much useless and dont know how to fix it!
There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it. -
Can anyone help me with a problem i am having with my music on my iPhone 4S. I have put alot of Compilation CDs in my library on iTunes. I download these tracks onto my phone, everything is ok so far. Now, this is what is niggling me and I don.t know how to resolve it. This is my problem:
Have downloaded for example: Queen – Bohemium Rhapsody from a compilation album as well as a few complete Queen Album CDs into the iTunes library and then put them into playlists,
When I go onto my phone and select Queen on the MUSIC app using Songs tab at the bottom of the screen it will display all Queen songs and their resective Alum pics, that is all those not in a complilation album, .
If I know the song title I can select the songs tab and find the song that way,
I’ve tried fiddling with the settings in the iTunes app by going to ‘get info’ tab and trying to sort the problem out that way but am not having much luck.What I want the phone to do is show, for example all Queens songs including those in compilation albums. Can this be done, would be grateful for any ideas on how it can be done, that is if ic can be done, any ideas
Thanks for your helpTry assigning Queen as the Album Artist on the compilations in iTunes on your computer.
-
"It is formatted incorrectly, or is not a format that iBooks can open". Can anyone help me with this message of a book that I purchased on iBooks, read, highlighted in the book and now I can't open it anymore. Please help!!!
Mine does the same thing occasionally, is your phone jailbroken? Sometimes it will work if you delete the book and reinstall it or put your phone into airplane mode then turn it back off.
-
I can't find the 2G, 3G and LTE options after updating to iOS8.1, can anyone help me with this? I'm using iPhone5s
I have check on my service provider about the correct APN settings, but unfortunately doesnt work still..
-
I need to reinstall my operating system for 10.5 after seeing a file folder and question mark flashing on my start up screen. Can anyone help me with this?
Hello,
That means it can find the Hard Drive, or can't find the things needed for booting.
See if DU even sees it.
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.) -
Hi can anyone help with this issue regarding my wireless magic mouse? When im on google chrome and scrolling down the page i always have youtube running in the background but the audio cuts/spits/pops can anyone help me with this?
The figures you mention only make sense on your intranet. Are you still using the same wireless router. The verizon one is somewhat limited as far as max wireless-n performace. For one thing it only has a 2.4 radio. I like many people who wanted wireless-n performance before they even added a wireless-n gigabit router, have my own handling my wireless-n network.
-
When my screen saver has been on a while, I have to use the cursor to "rub out" part of the screen saver to see my login section. Can anyone help me with this?
I don't have a solution for you, but just wanted to let you know I used to have the exact same problem. I resolved it (for the most part....about 90% of the time, anyway) by adjusting the screensaver and power settings to never let the computer go to sleep.
-
(The iPhone "Named" cannot be restored at this time because the iPhone software update server could not be contacted or is temporarily unavailable.)
can anyone help me with this issue, every time i try to restore it will come up like this error message.Restore the iPhone when connected to iTunes by cable.
Still the same TS1275?
Is your iPhone jailbroken?
Or
Has your computer ever been used to jailbrake or downgrade (Tinyumbrella) any iPhone? -
When typing the name of the contact I want to send a text message to, names from my contact list no longer pop up as suggestions. Can anyone help me with this?
There's always a way to reset the device jmn33! Thanks for keeping us in the loop. To process a full reset/restore on the device please visit http://vz.to/12TLCsR. Please keep us posted once this is completed, thanks!
MatthewS_VZW
Follow us on Twitter @VZWSUPPORT
Maybe you are looking for
-
SMS alert - I dont want the name of the sender appearing on the screen
Prior to downloading the recent upgrade, my SMS alert would simply notify me that I had a new text message but would not identify the sender. Now, the sender's names appears on the screen. How can I change my setting so that the sender's name is not
-
Re: CSRFGuard failing to initialize in WebLogic 12c
Hi, has this issue been solved meanwhile ? I'm asking because we have run into the same problem: We needed to 'harden' an older web application against Cross-Site Request Forgeries and we used OWASP's CSRFGuard (V 3.0.0.503) for the task. While devel
-
Not receiving email when sending large number of records using a FM?
Hi.. I am using the function module " SO_DOCUMENT_SEND_API1 " to send email.... When a single record is there.. or around 5-6 records are there... email is coming successfully... But when there are more records..say around 100, the email is not comin
-
what is derivation rule? what is the function of derivation rule in copa
-
MSI K8n NEO4F (ver 1) bios 7125ncg ENERMAX Whisper EG465P-VE FMA(24) nVidia 7600GS 256MB OCZ EB DDR PC-4000 /500MHz Win XP Pro w/SP2 AMD 3700+ (939) The video will work, correctly, in safe mode only. Using latest nVidia drivers. Boots fine till we hi