Hey gurus, req to help me.......

what do we mean by end user manual and end user training and can any body explain this two concepts in detail and details involved in it.

End User Manual:
This is a document, which can be used for End User Training. This contains the process flow with screenshots.
End User Training:
This is practically training the end user, how to do the process in the system. What are pre-requisite to execute the process?
For eg: A sales order can be processed if
1. Sales Area assigned to Sales Document Type (Configuration)
2. Customer Master Created (Master Data)
3. Material Master Created (Master Data)
4. Condition Record maintained for Pricing (Master Data)
& so on ................
Regards,
Rajesh Banka
Reward points if helpful.

Similar Messages

Hey Gurus I've just shot a seminar, three cameras, Cannon's reasonably new XA20HD's. File format 1920X1080 MP4 17mbs 25 frames. Am running PremProCS6. I import the files into Prem, they come in ok but will not display. Got a yellow bar and a yellow Media

Hey Gurus I've just shot a seminar, three cameras, Cannon's reasonably new XA20HD's. File format 1920X1080 MP4 17mbs 25 frames. Am running PremProCS6. I import the files into Prem, they come in ok but will not display. Got a yellow bar and a yellow Media Pending screen. What the? Have to cut this stuff soon! Wont even import into Media Encoder. Says there are no usable streams in the media! Just saw a podcast title about stress in the editing business. Better listen to the one! Any help would be most appreciated. J.

Copy ALL contents of SD card to a folder on edit hard drive. not just video clips, everything. Then in Premiere, import using Media Browser (tab at lower left of Premiere screen). This usually does the trick. There is metadata contained in the SD card files that is needed, not just the video clips alone.
Thanks
Jeff Pulera
Safe Harbor Computers

HT1222 Hey guys I need help I am trying to get ios 7.0.4 on my iPod touch 5 gen but every time I try downloading it it says download faild and I've rebooted it reset it and cleared storage but it still doesn't work

Hey guys I need help I am trying to get ios 7.0.4 on my iPod touch 5 gen but every time I try downloading it it says download faild and I've rebooted it reset it and cleared storage but it still doesn't work

Try disabling the computer's antivirus and firewall.
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
- Then try on another computer

Hey guyz can u help me out on how to make an apple ID on iPhone 4s without having a credit card information

Hey guyz can u help me out on how to make an apple ID on iPhone 4s without having a credit card information

http://support.apple.com/kb/ht2534

HEY! i need help

i am trying to transfer music files from itunes to a mp3 player and it keeps telling me that the files are invisible... How do i make them visible and how did they become invisible??

Just FYI, yelling "HEY! I need help" is going to be considered rude by most people and put them off from wanting to help you. No one here gets paid to help, so being polite and undemanding is highly recommended. It's best if you use a subject line that reflects the general nature of the issue with which you need help so that people can easily see if they would have knowledge that would apply.
Regards.

Hey guys, i need HELP !!!My iphone 6 just gave stolen .... But i hope that can take all the photo back... Total is almost 3000 pc ... But my icloud storage just 5gb only ... If there have any ways to let me get back those photo ? Those photo really m

Hey guys, i need HELP !!!My iphone 6 just gave stolen .... But i hope that can take all the photo back... Total is almost 3000 pc ... But my icloud storage just 5gb only ... If there have any ways to let me get back those photo ? Those photo really mean a lot to me .... Have alot of memory with family ... It's very meaningful !!! Please kindly help me !!! Thanks

Please please help me, if you know how.

Hey ammm who can help me y need help but i don´t speak english very well, hey ammm who can help me y need help but i don´t speak english very well

hey ammm who can help me y need help but i don´t speak english very well, hey ammm who can help me y need help but i don´t speak english very well

Post your question in your native language. There are often Spanish speakers who participate in these forums.
Regards.

Hey. Can anyone help me?

Hey. Can anyone help me? Have only a few weeks ago bought me my first computer from Apple. Precise a Macbook. I also bought a Time Capsule - 2 TB which I prefer to use to connected me to the internet. My Time Capsule is connected to my wireless modem through the LAN port of the wireless modem and the "internet port" for Time Capsule.
I am happy with this setup, but wondering if anyone can give me some advice regarding the use of the wireless network connection that I already had in place before I was able to purchase new. Should I turn off the wifi feature on my wireless modem to avoid two signals from two different network connection. Or is this unnecessary to me.
Using the old network connection to the internet for my electrical devices with WiFi access. And am unsure if I manage to switch to the new wireless network connection on my electrical devices with WiFi access. Please let us know if any of my explanations are difficult to understand since I do not write in my mother tongue.

Should I turn off the wifi feature on my wireless modem to avoid two signals from two different network connection. Or is this unnecessary to me.
Yes and no.
Two wireless networks in close proximity to each other can create possible interference that will affect the speed and reliability of your wireless connection, so it is usually a good idea to turn off the wireless function on one wireless router.
However, if you do not notice any problems, it will not hurt to leave the wireless signal in place on the other wireless router.

Hey everyone :) I need help resting my password secuirty questions

Hey everyone okay so its getting a little bit frusturating because this is the second time now that i've had to rest my password secuirty questions, but i guess i have no one to blame but my self ugh. Anways sorry, i know kind of how to rest it but it says that i need a rescue email to rest it to and i guess id don't have a rescue email yikes. So i need help putting in a rescue email. Help anyone? Please i really wanna buy song grrrr help
Savannah S. xx

You won't be able to add a rescue email address until you can answer your questions, you will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

Gurus..need help in reading data from virtual infocube

Gurus,
I have to read data from an virtual infocube...I am trying to use FM RSDRI_INFOPROV_READ to read data but it doesn't work..
I am doing exactly what has been done in the demo program RSDRi_INFOPROV_READ_DEMO...
Please help me...its really URGENT...
Thanks
sam

Check out this thread....
must be helpful
Re: Read data from 0BWTC_C02 via ABAP

Hi sap gurus can anyone help to sort my Problem

hi sap gurus
i have a scenario
1) sales order should allow the BOM subitems which drives the demand. can u anybody tell me how to configure step by step. in addition to that , i need subitems should not be displayed on the customer invoice. how can i do that?
maximum points will be rewarded.

thanksin advance
sam sd

Hi
Not displaying the subitems in the invoice can be controlled in the program which is linked to your output type. If you inform your reqmts to the ABAPer, he should be able to code accordingly.
For demand planning, you may either have to use Sales Operations Planning or Transfer of Reqmts in SD. You can talk to somebody who knows either of these good and they can help you. Alternatively, you can post this specific question in PP also. May be you will get immediate answer for this.
Pls reward if this is helpful to you

QUERY CLARIFICATION RQD : gurus, experts pls help

Hai,
I am facing problem in performance of the query. sample scenario i have created here pls help me to solve
**VEH_MAIN* TABLE (MASTER TABLE)*
CREATE TABLE VEH_MAIN
   (     VIP_MOT_IND VARCHAR2(10 BYTE),
     VIP_IND NUMBER(10,0)
Insert into VEH_MAIN (VIP_MOT_IND,VIP_IND) values ('MOT01',1);
Insert into VEH_MAIN (VIP_MOT_IND,VIP_IND) values ('MOT02',5);
Insert into VEH_MAIN (VIP_MOT_IND,VIP_IND) values ('M0T03',1);
Insert into VEH_MAIN (VIP_MOT_IND,VIP_IND) values ('MOT01',2);
Insert into VEH_MAIN (VIP_MOT_IND,VIP_IND) values ('MOT02',6);
Insert into VEH_MAIN (VIP_MOT_IND,VIP_IND) values ('MOT01',3);
Insert into VEH_MAIN (VIP_MOT_IND,VIP_IND) values ('MOT01',4);
**VEH_ENGINE_SUB* (table for engine subclass)*
CREATE TABLE VEH_ENG_SUB
   (     ENG_SUBCLASS VARCHAR2(50 BYTE),
     ENG_MOT_IND VARCHAR2(10 BYTE)
Insert into VEH_ENG_SUB (ENG_SUBCLASS,ENG_MOT_IND) values ('ENGSUB001','MOT01');
Insert into VEH_ENG_SUB (ENG_SUBCLASS,ENG_MOT_IND) values ('ENGSUB001','MOT02');
*VEH_ENG_IND( Detail table for engine subclass)*
CREATE TABLE VEH_ENG_IND
   (     "ENG_SUBCLASS" VARCHAR2(50 BYTE),
     "ENG_IND" VARCHAR2(10 BYTE)
Insert into VEH_ENG_IND (ENG_SUBCLASS,ENG_IND) values ('ENGSUB001','1');
Insert into VEH_ENG_IND (ENG_SUBCLASS,ENG_IND) values ('ENGSUB001','2');
*VEH_AXIS( Master table for Engine Axis)*
CREATE TABLE VEH_AXIS
   (     ENG_AXIS VARCHAR2(50 BYTE),
     AXIS_MOT_IND VARCHAR2(10 BYTE)
Insert into VEH_AXIS (ENG_AXIS,AXIS_MOT_IND) values ('ENGAXIS001','MOT01');
Insert into VEH_AXIS (ENG_AXIS,AXIS_MOT_IND) values ('ENGAXIS002','MOT02');
*VEH_AXIS_IND( Details table for engine axis)*
CREATE TABLE VEH_AXIS_IND
   (     ENG_AXIS VARCHAR2(50 BYTE),
     ENG_IND VARCHAR2(10 BYTE)
Insert into VEH_AXIS_IND (ENG_AXIS,ENG_IND) values ('ENGAXIS001','1');
Insert into VEH_AXIS_IND (ENG_AXIS,ENG_IND) values ('ENGAXIS001','2');
Insert into VEH_AXIS_IND (ENG_AXIS,ENG_IND) values ('ENGAXIS001','3');
Insert into VEH_AXIS_IND (ENG_AXIS,ENG_IND) values ('ENGAXIS001','4');
Insert into VEH_AXIS_IND (ENG_AXIS,ENG_IND) values ('ENGAXIS002','5');
Insert into VEH_AXIS_IND (ENG_AXIS,ENG_IND) values ('ENGAXIS002','6');
Condition 1
if i select only ENGINE_SUBCLASS='ENGSUB001' then
SELECT vip_mot_ind,vip_ind
FROM veh_main V,
veh_eng_sub vsub,
veh_eng_ind vind
WHERE (v.vip_mot_ind= vsub.eng_mot_ind
and   v.vip_ind=vind.eng_ind
and    vsub.eng_subclass= vind.eng_subclass
AND vsub.eng_subclass='ENGSUB001' )output is
MOT01     1
MOT01     2
Condition 2:if i select only the Engine Axis='ENGAXIS002' then the
SELECT vip_mot_ind,vip_ind
FROM veh_main V,
veh_axis vaxis,
veh_axis_ind vaind
WHERE v.vip_mot_ind= vaxis.axis_mot_ind
and   v.vip_ind= vaind.eng_ind
and   vaind.eng_axis= vaxis.eng_axis
and   vaxis.eng_axis='ENGAXIS002';MOT02     5
MOT02     6
Condition 3:
BOTH ENGINE AXIS AND ENGINE SUBCLASS
SELECT vip_mot_ind,vip_ind
FROM veh_main V,
veh_eng_sub vsub,
veh_eng_ind vind,
veh_axis vaxis,
veh_axis_ind vaind
WHERE (v.vip_mot_ind= vsub.eng_mot_ind
and   v.vip_ind=vind.eng_ind
and    vsub.eng_subclass= vind.eng_subclass
AND vsub.eng_subclass='ENGSUB001' )
AND ( v.vip_mot_ind= vaxis.axis_mot_ind
and   v.vip_ind= vaind.eng_ind
and   vaind.eng_axis= vaxis.eng_axis
and   vaxis.eng_axis='ENGAXIS002');Null values returned. this is correct.
But the query PERFORMANCE fails in OR CONDITON as below
Condition 4;
SELECT vip_mot_ind,vip_ind
FROM veh_main V,
veh_eng_sub vsub,
veh_eng_ind vind,
veh_axis vaxis,
veh_axis_ind vaind
WHERE (v.vip_mot_ind= vsub.eng_mot_ind
and   v.vip_ind=vind.eng_ind
and    vsub.eng_subclass= vind.eng_subclass
AND vsub.eng_subclass='ENGSUB001' )
OR ( v.vip_mot_ind= vaxis.axis_mot_ind
and   v.vip_ind= vaind.eng_ind
and   vaind.eng_axis= vaxis.eng_axis
and   vaxis.eng_axis='ENGAXIS002');output
MOT02     5
MOT02     5
MOT02     5
MOT02     5
MOT02     6
MOT02     6
MOT02     6
MOT02     6
MOT01     1
MOT01     1
MOT01     1
MOT01     1
MOT01     1
MOT01     1
MOT01     1
MOT01     1
MOT01     1
MOT01     1
MOT01     1
MOT01     1
MOT01     2
MOT01     2
MOT01     2
MOT01     2
MOT01     2
MOT01     2
MOT01     2
MOT01     2
MOT01     2
MOT01     2
MOT01     2
MOT01     2
This is sample example. when i implement in huge table with partition this scennario takes much time even 2 hours to run.
i want the output must be as below if i use OR condition like condition 4
MOT01     1
MOT01     2
MOT02     5
MOT02     6
Gurus and experts pls help me to solve this problem. Dont give any suggestion like
SELECT vip_mot_ind,vip_ind
FROM veh_main V,
veh_axis vaxis,
veh_axis_ind vaind
WHERE v.vip_mot_ind= vaxis.axis_mot_ind
and   v.vip_ind= vaind.eng_ind
and   vaind.eng_axis= vaxis.eng_axis
and   vaxis.eng_axis='ENGAXIS002'
union
SELECT vip_mot_ind,vip_ind
FROM veh_main V,
veh_eng_sub vsub,
veh_eng_ind vind
WHERE (v.vip_mot_ind= vsub.eng_mot_ind
and   v.vip_ind=vind.eng_ind
and    vsub.eng_subclass= vind.eng_subclass
AND vsub.eng_subclass='ENGSUB001' )
}this will give correct result...
MOT01     1
MOT01     2
MOT02     5
MOT02     6
but the problem is we cannot implement this in query. because query get framed at runtime there will be so many implement has to be done. other than UNION pls give me more suggesion
waiting..
S
Edited by: A Beginner on Sep 11, 2010 12:51 AM

create a view v1 with all the joins
select * from v1 where eng_subclass='ENGSUB001'
union
select * from v1 where eng_axis='ENGAXIS002'
If you really do not like the direct access with union, try this
select * from v1
where vsub_PK in (select vsub_PK from v1 where eng_subclass='ENGSUB001' )
OR vsub_PK in (select vsub_PK from v1 where eng_axis='ENGAXIS002')
--vsub_PK is the primary key of table vsub

Starting from the ground up - any gurus interested in helping?

Hi, and thanks for reading.
I am going to reach out to the community here, and ask for some serious help. I am currently rebuilding my computer, and I have long fiddled and tweaked around, but I believe my knowledge is no match for some of you gurus out there.
I would like to ask if anyone would be interested in guiding me through the rebuild of this computer? Maybe just checking in now and then as it all comes together, or just helping answer some questions when you can? I have all the parts installed, and would just need your insight into tweaking the BIOS settings, etc. I know everyone's time is valuable, but if you would be willing to share some of your knowledge with me, I know I could return the favor by helping others when I can.
Here is my specs:
865PE-NEO2-LS
AMI BIOS version 2.3 (7-16-2004)
P4 2.8 Ghz/800Mhz FSB
PowMAX 400 watt Power Supply
INTEL 865 .INF Drivers (6.0.1.1002 5/7/2004)
Boot/Main Drive: WEstern Digital Raptor, 10K rpm, 36GB on SATA1
Back-Up Drive: Maxtor ATA133 7200rpm 120GB hard jumped as Cable Select on IDE1 Master
CD-RW: Lite-On 52x32x52 CD-RW jumped as Cable Select on IDE1 Slave
BFG Technologies GeForce 6800 GT OC 256MB GDDR3 AGP Graphics Card
SoundBlaster Audigy 2
I will disable onboard sound, and the firewire ports as I won't need them. Also, I don't use any power managment stuff, so would disable that as well.
Plan to install Windows XP Professional
Well, thanks kindly for your consideration. If you would like to help, here are just a few starting questions I have:
What would be the best way (performance-wise) to configure the drives? Why? What is the difference between legacy mode vs. native mode? I think native mode is better, but why? Also, is there any benefit to NOT using the secondary IDE channel (will it save system resources under Windows XP Professional)?
Which PCI slot would provide the best performance/IRQ for the Soundblaster Audigy 2 card? (I think we want to avoid slots 2&5 because they are shared by default in the BIOS?). Also, would you manually change the PCI Slot IRQ priority (in the BIOS PNP/PCI Configuration menu)? I had problems last time with my sound card crackling, changing volume, and was advised by Creative to ensure the soundcard gets a completely dedicated, high-priority IRQ.
BIOS SETTING: APIC ACPI SCI IRQ = Enabled or Disabled? I have LONG been confused by this setting, and never know which setting yields better results. The manual reads: "This field is used to enable or disable the APIC (Advanced Programmable Interrupt Controller). Due to compliance to PC2001 design guide, the system is able to run in APIC mode. Enabling APIC mode will expand available IRQs resources for the system" OK - but is that better, or worse? I thought you should always try to stick with original 15 IRQs, and hopefully pray for a miracle that each device gets assigned it's own IRQ (like the graphics card, sound card, etc.). If anyone could shed some light here, I would appreciate it.
System BIOS Cacheable - should I set to enabled, or disabled?
C000, 32k Shadow - should I set to enabled, or disabled?
What other "must dos" might you recommend?

I'm not a Guru but I think these info may help you down the road.
Native Mode is recommended for your setup.
On Chip ATA Operate Mode: Native
ATA Config: SATA only
PATA Keep Enabled: Yes
PATA Channel Selection: Both
Native mode opens up more IRQs for IDE controllers and SATA controllers thus preventing them from sharing and having conflicts among themselves.
There is no benefit on system resource if you leave IDE 2 controller alone instead you may get problems since you are putting a CDRW drive and a HDD on 1 single IDE controller and even CS them which isn't recommended. I always recommend HDDs and Optical drives to be seperated between the 2 IDE controllers if possible so that you'll not suffer "time lags" while you are burning a disc or browsing through a disc and having the need to access the HDDs at the same time. System resource usage is mostly dependent on the apps, core programs, dlls, system files and background access/running programs, so the more of these are running in systray and svchosts as well as program apps like Anti-Virus or firewall will definately take up a big chunk(around 35%) of the resource.
APIC ACPI SCI IRQ is mainly for system which are having problems with the traditionally assigned IRQs by the system. By switching this on, the system will try to give an assigned IRQ to the individual hardware found.
You can leave the last 2 to default.
1 thing I'm very concerned of is your PSU specs amps. The reason being that you are trying to power a PIV 2.8C GHz FSB 800MHz CPU + Aud 2 SB card + 6800GT GPU + ?MB RAMs and 1 raptor which will takes up quite an amount of power from your PSU continuously. It is better for you to post your PSU specs amps on the individual rails for us to verify. If you are wondering where to find the details, these info can be found on the label that sticks to the side/top of the PSU.

Hey I really need help

hey I really need your help, I lost my "transform square" around objects, I can´t transform them anymore please someone help me!

You are welcome, Erick.
It is the toggle View>Show/Hide Bounding Box. View>Show/Hide Edges (Ctrl/Cmd+H) is an even easier keyboard mishit that may go unnoticed, completely surrounded by other commands.

Hey, Windows device removal help needed!!

Hi there, I'm trying to remove my device from iTunes, because I'm at my limit for how many iTunes it's registered to... And I can't figure out how to remove it from my Windows PC, before I get rid of the computer! HELP!!!

Hey Kyasurinx!
Here is an article that will help you deauthorize this computer for your iTunes purchases:
iTunes Store: Authorize or deauthorize your Mac or PC
http://support.apple.com/kb/ht1420
Next, you will want to completely uninstall iTunes by following the instructions found here:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

Hey gurus, req to help me.......

Similar Messages

Maybe you are looking for