Hey guy can you please help me with this issue PLEASE!
Hey Apple can you please help me with this issue, i have a iPhone 3gs and when i put my sim card into the iPhone it makes iphone 3gs shut down suddenly how do i fix that?
iPhone version: 6.0.1
service provider: Vodafone nz
You could restarting your phone that sometimes fixes issues
Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for phone to restart (no data will be lost).
Similar Messages
-
I get "We could not complete your iTunes Store request. An unknown error occurred (4002) Can any person help me with this on, please?
Turning off iTunes Match and Genius and then turning them back on appears to have worked for some people e.g.
https://discussions.apple.com/message/22059685#22059685
https://discussions.apple.com/message/18427550#18427550 -
i have a problem with xcode programming app when i lunch to it it asking me to enter my password and when i enter it the program show that it is wrong but am 100% sure it's wright so please help me with this issue thanks
That's not very intuitive
Check your mail server setup (mail>preferences>accounts>) choose your MobileMe account and select Outgoing Mail Server (SMTP) dropdown box, select Edit SMTP server list, verify that each instance of the me server has a password, if there are more than one and you only have one account then delete the one without a password. -
Everything on my macbook air 10.7.5 appears blurred. I tried searching a few things but didnt get any success.
Can anybody please help me with this ?Nothing looks blurred to me on the screen shot you posted. However, I did notice that some of the fonts in the tabs are faded. Which browser are you using? You should post in a browser forum about that and also the blurring that you see.
Since your Finder fonts looks blurry to you, go to System Preferences/Personal/Appearance - play around with the text smoothing setting. If that does not work, play around with the resolution settings - System Preferences/Displays/Display -
i have been having an issue with updating my ipod touch for some time now and i can not seem to get it to update to the lastest update. it is stuck on 4.2.1 software and i can not update it to 4.3 or any other ios software update. can you please help me to solve this issue.
It sounds like you actually have a 2G iPod Touch which can only go as high as iOS 4.2.1. If it's an 8 GB iPod Touch it's definitely a 2G iPod Touch as there was never such a thing as a 3G 8 GB iPod Touch. See this article to help verify what generation iPod Touch you have.
Identifying iPod models
B-rock -
I am trying to learn HANA on my own.i have product id,product name,delivery date and Grossamount in my calculated view.i am trying to create calculated column where i need Grossamount in two columns based on delivery date.I have 2012 and 2013 as values for my delivery date.so i have created two column as grossamount_2012 and grossamount_2013.if i have delivery date as 4thdec,2012 i want the grossamount value to be in coloumn grossamount_2012 and the grossamount_2013 should be blank.i have written an expression like this
if("Deliverydate" <= longdate(2012-12-04),"Grossamount","0")
and it looks like this is wrong.i am getting the text Grossamount rather than values for that field in my output.so can anyone help me please?Hi chandra
i am trying to get the same result by using sql script and CE functions.i have written the following code
select A."PRODUCTID",
E."TEXT" as "PRODUCTNAME",
C."COUNTRY",
D."DELIVERYDATE",
Sum(D."GROSSAMOUNT") as "GROSSAMOUNT"
from "SAP_HANA_DEMO"."sap.hana.democontent.epm.data::EPM.MasterData.Products" as A
inner join "SAP_HANA_DEMO"."sap.hana.democontent.epm.data::EPM.MasterData.BusinessPartner" as B
on A."SUPPLIERID" = B."PARTNERID"
inner join "SAP_HANA_DEMO"."sap.hana.democontent.epm.data::EPM.MasterData.Addresses" as C
on B."ADDRESSID" = C."ADDRESSID"
inner join "SAP_HANA_DEMO"."sap.hana.democontent.epm.data::EPM.Purchase.Item" as D
on A."PRODUCTID" = D."PRODUCTID"
inner join "SAP_HANA_DEMO"."sap.hana.democontent.epm.data::EPM.Util.Texts" as E
on A."NAMEID" = E."TEXTID"
GROUP BY A."PRODUCTID",E."TEXT",C."COUNTRY",D."DELIVERYDATE";
this is working fine but i want to split the grossamount based on current year and last year.Any idea how to do this
In calculation view using script can we use if and case statements? -
My purchased songs aren't lost the computer is not giving the option to put the newly purchased music into the ipod.
How do you do what? Plug the iPhone into a USB port directly on your computer, or disconnect other USB devices? To disconnect a USB device unplug it from the computer. If it is a disk drive eject it first using the Eject icon in the System Tray. To plug the iPhone into a USB port directly on the computer insert the USB end of the sync cable into a USB port on the computer.
If you are using all of the ports on your computer get a hub and plug low power devices into the hub (e.g., keyboard, mouse). Or get a hub with its own power supply and plug your high power devices (disk drives, DVD drive) into it. -
Hi Seniors Please Help me with this issue......
Seniors......
when the Data Entry is Done in MIGO there is a place to Enter a
External number for Delivery Note ...to enter a External Number..... My client needs that Number in the Report....i am not finding that number..... any where in SAP or in tables...please can u help me in finding it....Urgent Please
Thanks
Nalini.Hi Nalini,
m Not sure abt this..
Search MSEG table with Movement type 601 (Goods issue for Delivery) then you will find Delivery no in field "LGPLA".
nd hv a look on..
MSEG-LFBNR reference document number
<b>Reward Points if useful.</b>
Thanks & Regards
ilesh 24x7 -
Hi, I'm stuck at step 9. I don't see my external harddrive when I want to save the DMG backup file. Can you please help me with this? I'm desperate to make this backup! Big thanx in advance!
http://support.apple.com/kb/HT1553Repair permissions and restart your computer. If this does not work, zap the pram. You should now see your external hard drive.
-
I tried to downgrade my iCloud and when i did it never refunded me can you please help me with this thank you James
<Personal Information Edited by Host>How did you try to downgrade
(Don't post your telephone number in public places, unless you need more useless phone calls) I will ask for it to be removed. -
everything freezes i can't even force quit i have to shut off by holding the power button down please help me with this. thanks
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
the title pretty much has my question i guess. it's my first post so i'm not sur if you'll see all of it. I'll just copy paste it anyhow.
i've bought the first season of Death Note on itunes, and i've was never able to download the 11th episode (Assault), it gives me error -50 each time I try. Can anyone please help me with this?Perhaps try the "Error -50," "-5000," "8003," "8008," or "-42023" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting -
HT201401 Q) Can anyone please help me with this: My in coming call ringing tone not working?
Q) Can anyone please help me with this: My in coming call-messges ringing tone not working? All I am getting in Vabration + Flashing light when receiveing messages or incoming Calls. I am missing my phone Calls constantly. Please Help me?
I have just received this phone as a replacement from my insurance company, as I had lost my own phone. It has taken them 3 weeks to sort this out. This has ruined my business because it has taken so long. I really do not have time to send it back to them. Because it will waist another three weeks for them to sort it out again. Please Help!HA! By Jove I've Got it! it was simples..
TURN ON THE RINGING ON / OFF BUTTON ON THE SIDE OF YOUR PHONE JUST ABOVE THE VOLUME BUTTONS. THEN MAKE SURE THE VOLUME IS UP TO THE HIGHEST. NOW JUST TRY THIS!
I ALSO LOOKED UP A MANUAL ON IPHONE4:
Ringtones, Ring/Silent switch, and vibrate
iPhone comes with ringtones that sound for incoming calls, Clock alarms, and the Clock timer.
You can also purchase ringtones from songs in iTunes. See Chapter 22, iTunes Store, on page 94.
Set the default ringtone: Go to Settings > Sounds > Ringtone.
Turn the ringer on or off: Flip the switch on the side of iPhone.
Important: Clock alarms still sound even if you set the Ring/Silent switch to silent.
Turn vibrate on or off: Go to Settings > Sounds.
Assign a different ringtone for a contact: In Contacts, choose a contact, tap edit, then tap
Ringtone and choose a ringtone.
For more information, see Sounds on page 139.
THE REASON MY PHONE HAD NO RING TONE, WAS SIMPLY BECAUSE THE VOLUME WAS TURNED DOWN. :-/
I HOPE THIS HELPS OTHERS INFUTURE! :-D -
Hello, Honestly I just updated my 4s and my iPad 3 to iOS 6 and when try to press on the Music app or the iTunes app it says "cannot connect to iTunes Store" Could you please help me with this thank you so much, Charbel from Lebanon
See these previous discussions help.
App Store Updates (but only Updates)...: Apple Support Communities
Apps suddenly don't update: Apple Support Communities -
What will i do..there is a message show, "your device in not more eligible to create a free i cloud acount"..and when i try a new one it ask an account number, but i dont have...can you help me with this issue..?
I try also my old icloud user but its not recognizing the accoun...What will i do..there is a message show, "your device in not more eligible to create a free i cloud acount"..and when i try a new one it ask an account number, but i dont have...can you help me with this issue..?
I try also my old icloud user but its not recognizing the accoun...
Maybe you are looking for
-
Kernel Panics, Gray screen of death, and hard drives, oh my!
Last week, while performing multiple tasks on my G4, Safari froze up and completely locked up the entire computer. I rebooted by manually pushing the glowing power button the front of the tower. During reboot, I got the gray screen of death with the
-
Adding more RAM to my MacBook Pro
I have a MacBook Pro 2.4 GHz with 2 GB 667 MHz DDR2 SDRAM and need to add more ram. can i, and if so, what kind should i get? what's the most I can add? recommend any non-apple brands like kingston? (since it'd be cheaper and i can have a friend inst
-
Integration of BOR functionality into a ABAP-OO Class
Hi together, we are planning a WebDynpro application in which we are using about ten ABAP-OO classes. The functionality of that classes are using BOR-Objects. Since we are using the M-V-C pattern, we like to create Entities, e.g. "Business Partner" w
-
Where are the back/forward arrows to navigate web site?
<blockquote>Locking duplicate thread.<br> Please continue here: [[/questions/840834]]</blockquote> as I progress through a web site and I want to go back a page and then forward to the page I just left, how do I do this? I do not see back/forward arr
-
Content expiration from web page
Hi, all - Dreamweaver 8.0.2, Win XP, using asp, vbscript, and SQL database (and utilizing WebAssist's Super Suite). I'm going to be developing a "clients only" area with asp pages connecting to a SQL database. As part of the project, I need to develo