Hey guys could any one help me???

today, my iphone was switched off and has not been switched on yet and i don't konw why
all what i did was i thought that it needed a charger then i put it but no response or any sign shows it is charging
so i need anyone help me or tell me what happened or what can i do??

Try resetting your phone:
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release.

Similar Messages

Wifi and bluetooth hardware missing in my ipod touch could any one help me to fix it?

wifi and bluetooth hardware missing in my ipod touch could any one help me to fix it?

If the following is your problem try the troubleshooting described within:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
Frequently it is due to hardware problem and an appointment at the Genius Bar of an Apple store is in order.
If that is not your problem then we need more information about hur problem. How do you know the"hardware" is missing?

Could any one help how to open the application without port number in servl

Could any one help how to open the application without port number in servlets or jsp?

Well, configure the application server/web container to listen to the default http port of 80, rather than 8080.
I couldnt get where to specify 80 instead of 8080 so that it opens without numbers

Hi could any one Help me !!! I have No SOund .MTS file in CC Premiere 2014

Hi could any one Help me !!! I have No SOund .MTS file in CC Premiere 2014

Rename the top folder your footage is in and import again.

TS3920 Weather day is one day slow and even though it is pass midnight it still shows the yesterday's weather. Could any one help? Thanks. I phone 4

Weather day is one day slow and even though it is pass midnight it still shows the yesterday's weather. Could any one help? Thanks. I phone 4

Pay no attention to iinami, the amount of replies to people saying their handsets must have been jailbroken everytime iTunes throws out an error is tremendous. (Clearly you don't need to have any real knowledge to get to level 3 on these forums, let's hope apple's geniuses know a lot more than some of their customers.)
http://support.apple.com/kb/TS3694
Solution below.
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

CODE is executing but improper results. Could any one help me please.

Below is the code . It is executing but improper results. Could you please help me.
ActiveDocument.Sections["Results5"].Limits["Company Id"].CustomValues.RemoveAll() ;
ActiveDocument.Sections["Results5"].Limits["Company Id"].CustomValues.Add(TextBox1.Text) ;
ActiveDocument.Sections["Results5"].Limits["Company Id"].SelectedValues.Add(TextBox1.Text) ;
ActiveDocument.Sections["Query4"].Limits["Company Id"].CustomValues.RemoveAll() ;
ActiveDocument.Sections["Query4"].Limits["Compan Id"].CustomValues.Add(TextBox1.Text) ;
ActiveDocument.Sections["Query4"].Limits["Company Id"].SelectedValues.Add(TextBox1.Text) ;
function populate_controls (results_section, results_col_id, results_col_desc, results_col_sort, control_name, first_item_text)
{ var prior_value = '';
var curr_value = '';
var sort_field = '';
control_name.RemoveAll();
control_name.Add(first_item_text);
for (j = 1; j <= results_section.RowCount; j = j+1)
curr_value = results_section.Columns[results_col_id].GetCell(j);
if (curr_value != prior_value) { control_name.Add(curr_value) };
prior_value = curr_value;
//*************************************************************************************************************************************************************

I think you must be in the wrong forum. This is the forum for Berkeley DB, Java Edition.

Could any one help me please

Hi ive only just got my BlackBerry® Curve™ 8500 yesturday and i cant setup of my email i click on email set up and email setup all i get i want to use my work email account i dont get the set up one where u want to create email use email msn our yahoo

By contacting your carrier...they control the services to which you have access. See this FAQ:
http://www.blackberryfaq.com/index.php/What_do_I_need_a_Data_Plan_for%3F
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Could any one help me!!!!

AA. i was worked on oracle 11g.1, oracle data miner 11.1.0.4, sql developer 3.
unfortunately, after finishing my tables and models ,the hard disk damaged and was replaced with other.the oracle setup was not on system partition,it was on D:/ and i have windows backup for C, D partition.how can i restore oracle files and data miner modules? is there any location contains old tables or modules?
really, i need it urgently.
please advise me.
thanks
hager
Edited by: user13615915 on May 19, 2012 2:30 PM
Edited by: user13615915 on May 19, 2012 2:31 PM

$ oerr ora 1206
01206, 00000, "file is not part of this database - wrong database id"
// *Cause: The database ID in the file header does not match the database id
//         in the control file. The file may be from a different database, or
//         it may not be a database file at all. If the database was rebuilt,
//         this may be a file from before the rebuild. Note that if you see
//         this error when the file is supposed to be plugged in from another
//         database via the Transportable Tablespace feature, it means the
//         database ID in the file header does not match the one expected.
// *Action: Restore a copy of the correct data file and do recovery as needed.Did you create a database when you did the new installation? You could look up the NID utility in the docs, but I'd be wondering why you got this error in the first place. Maybe you need to follow the create a new controlfile instructions, though I hesitate to say with the given information. It kind of sounds like you have the wrong data files.

I am unable to browse internet from my cisco 881 router and configuration is below could any one help me in this regard

HOME#sho run
Building configuration...
Current configuration : 5657 bytes
! Last configuration change at 10:51:11 UTC Fri May 17 2013 by admin
version 15.0
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname HOME
boot-start-marker
boot-end-marker
logging buffered 51200 warnings
enable secret 5 $1$bgx9$VrtQW3Wg182VyYhKAHLbN.
no aaa new-model
memory-size iomem 10
crypto pki trustpoint TP-self-signed-1190003239
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1190003239
revocation-check none
rsakeypair TP-self-signed-1190003239
crypto pki certificate chain TP-self-signed-1190003239
certificate self-signed 01
3082024A 308201B3 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 31313930 30303332 3339301E 170D3133 30353137 31303333
35315A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 31393030
30333233 3930819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100C002 80BBF151 E095E469 AA7DBB18 2A9E3CC2 4AC223F6 ABE0AF49 876C1203
65D0E246 786F174D E5B7897A 44C5755A 2571E58A 184A6C62 DD992A2A D8A24878
25A8D3C3 03F5D3C2 522EC8BB 302B0CCD 2945087A 7AF01418 D0056679 6F64DB4A
BE2D5DA1 106CD03A 83B422A2 3CCBAE88 F2413123 12269390 6949DFE0 411118E7
8F210203 010001A3 72307030 0F060355 1D130101 FF040530 030101FF 301D0603
551D1104 16301482 12484F4D 452E7777 772E7961 686F6F2E 636F6D30 1F060355
1D230418 30168014 3D2D854D 1203F50D 77F4ABC5 B61CEAF6 C922F4DF 301D0603
551D0E04 1604143D 2D854D12 03F50D77 F4ABC5B6 1CEAF6C9 22F4DF30 0D06092A
864886F7 0D010104 05000381 8100B24C 48BACACE 87ADEA03 386F2045 CC89624A
4EB1AD09 062EB2A4 CF4C96CA 0B2CF001 BD2C3804 8DC47FED 6A5B5F0D 3965AC6E
4FC4682F 707E4132 8F27C083 C7FAE1BD 21D055E6 C79D5DAD 051B6321 D35DB4F2
044E6BBD DAD08B6A 6ED87C7E 08F4F7E1 4EFDFB6F 867AF6FA 84165CFC D219D56F
A82EABD4 AD9CFA24 A5088145 E571
        quit
ip source-route
ip routing protocol purge interface
ip dhcp excluded-address 10.10.10.1
ip dhcp pool ccp-pool
   import all
   network 10.10.10.0 255.255.255.248
   default-router 10.10.10.1
   domain-name www.google.com
   dns-server 192.168.1.1
   lease 0 2
ip cef
ip domain name www.yahoo.com
ip name-server 84.235.6.55
ip name-server 84.235.57.230
no ipv6 cef
multilink bundle-name authenticated
license udi pid CISCO881-SEC-K9 sn FCZ1516933C
username admin privilege 15 password 0 cisco
interface FastEthernet0
interface FastEthernet1
interface FastEthernet2
interface FastEthernet3
interface FastEthernet4
ip address dhcp
ip access-group 101 in
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$
ip address 10.10.10.1 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat inside
ip nat enable
ip virtual-reassembly
ip tcp adjust-mss 1452
interface Vlan2
no ip address
ip nat inside
ip virtual-reassembly
ip default-gateway 192.168.1.1
ip forward-protocol nd
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat inside source list 101 interface FastEthernet4 overload
ip route 0.0.0.0 0.0.0.0 FastEthernet4
access-list 23 permit 10.10.10.0 0.0.0.7
access-list 101 permit ip any any
dialer-list 1 protocol ip permit
no cdp run
control-plane
banner exec ^C
% Password expiration warning.
Cisco Configuration Professional (Cisco CP) is installed on this device
and it provides the default username "cisco" for one-time use. If you have
already used the username "cisco" to login to the router and your IOS image
supports the "one-time" user option, then this username has already expired.
You will not be able to login to the router with this username after you exit
this session.
It is strongly suggested that you create a new username with a privilege level
of 15 using the following command.
username <myuser> privilege 15 secret 0 <mypassword>
Replace <myuser> and <mypassword> with the username and password you
want to use.
^C
banner login ^C
Cisco Configuration Professional (Cisco CP) is installed on this device.
This feature requires the one-time use of the username "cisco" with the
password "cisco". These default credentials have a privilege level of 15.
YOU MUST USE CISCO CP or the CISCO IOS CLI TO CHANGE THESE
PUBLICLY-KNOWN CREDENTIALS
Here are the Cisco IOS commands.
username <myuser> privilege 15 secret 0 <mypassword>
no username cisco
Replace <myuser> and <mypassword> with the username and password you want
to use.
IF YOU DO NOT CHANGE THE PUBLICLY-KNOWN CREDENTIALS, YOU WILL
NOT BE ABLE TO LOG INTO THE DEVICE AGAIN AFTER YOU HAVE LOGGED OFF.
For more information about Cisco CP please follow the instructions in the
QUICK START GUIDE for your router or go to http://www.cisco.com/go/ciscocp
^C
banner motd ^Cuthorized ^C
line con 0
login local
no modem enable
line aux 0
line vty 0 4
access-class 23 in
privilege level 15
password cisco
logging synchronous
login local
transport input telnet ssh
scheduler max-task-time 5000
end

HOME#ping 4.2.2.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 4.2.2.2, timeout is 2 seconds:
Success rate is 0 percent (0/5)
HOME#sh ip int br
Interface                  IP-Address      OK? Method Status                Protocol
FastEthernet0              unassigned      YES unset down                  down
FastEthernet1              unassigned      YES unset down                  down
FastEthernet2              unassigned      YES unset down                  down
FastEthernet3              unassigned      YES unset down                  down
FastEthernet4              192.168.1.120   YES DHCP   up                    up
NVI0                       10.10.10.1      YES unset up                    up
Vlan1                      10.10.10.1      YES NVRAM down                  down
Vlan2                      unassigned      YES NVRAM down                  down
HOME#
fast ethernet is connected to my internet connection

Quetion could any one help me about a count

as I can inside make a sum of registries of a special column in
form. and that tigger is the one that I must use within same
form.
thanks

1)i what to send an email from my application can u tell how plz
in deatails if u can.
Please refer Note:47498.1 in Metalink, which explains Sending a
Fax/Email via Microsoft Exchange.
2)i what to dial a telephone number from amy application plz
tell me howHope the above note gives you some idea on this.
3)can we send the window or the canvas as a parametre to a
procedure I am not clear about your requirement, if you want to pass the
window name or canvas name as a parameter to a procedure, it is
possible, just pass the name of the object as parameter.
Depending on the object type, i.e., window / canvas, do the
appropriate action in your procedure.
Hope the above helps,
Ganesan

23 quetion could any one help me

1)i what to send an email from my application can u tell how plz
in deatails if u can.
2)i what to dial a telephone number from amy application plz
tell me how
3)can we send the window or the canvas as a parametre to a
procedure

1)i what to send an email from my application can u tell how plz
in deatails if u can.
Please refer Note:47498.1 in Metalink, which explains Sending a
Fax/Email via Microsoft Exchange.
2)i what to dial a telephone number from amy application plz
tell me howHope the above note gives you some idea on this.
3)can we send the window or the canvas as a parametre to a
procedure I am not clear about your requirement, if you want to pass the
window name or canvas name as a parameter to a procedure, it is
possible, just pass the name of the object as parameter.
Depending on the object type, i.e., window / canvas, do the
appropriate action in your procedure.
Hope the above helps,
Ganesan

Hi,Everybody Could any one help me

Please explain below topics
-- Restricted Key-figures
-- Calculated Key-figures
-- Data Marts
-- Process Chains
-- Data Extraction
-- Update Method Extraction
-- Variables
-- Web Report Structures
-- Web Templates
-- Infospoke
-- Multiproviders
-- Types Routines their deffinatoions
-- Production Issues
-- Transportation of objects
Thanks
Venkat

Just seach /community [original link is broken] to find answers to all your questions !!

Hello guys..!! I have got my new iphone 4 2 days ago.The same day it got a problem of auto restart in every 1, to 2 minutes. I updated and restored it many times...but of no use... can any one help me how to solve this problem..!!

Hello guys..!! I have got my new iphone 4 2 days ago.The same day it got a problem of auto restart in every 1, to 2 minutes. I updated and restored it many times...but of no use... can any one help me how to solve this problem..!!

Go to Settings/General/Reset - Erase all content and settings. the connecto to iTunes and restore as a New phone. Do not restore any backup. If the problem persists you have a hardware problem. Take it to Apple for exchange.
This assumes that the phone is not hacked or jailbroken. If it is you will have to go elsewhere on the internet for help.

Hey, I had met a problem with installation. Can any one help me?

Hi everyone, I'm an user of Windows 7(64 bit),
I had just download "Master Collection CS5.5"
Everything are fine but Adobe Acrobat Professional can't install on my computer.
There are the details..:
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s), 1 warning(s)
WARNING: DW066: OS requirements not met for {AC76BA86-1033-F400-7760-000000000005}
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
ERROR: Install MSI payload failed with error: 1603 - 安裝時發生嚴重錯誤。
MSI Error message: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed
Thanks

Re: Hey, I had met a problem with installation. Can any one help me?
This worked for an English version and the concept should work with all Adobe programs - new or old (hopefully in any language). My guess is that you have/had an older version of Acrobat/Reader on your computer hard drive that needs to be *completely* removed first. Uninstall the new (and any old) Acrobat; then try using the "kb2..." guideline link below before reinstalling the new Acrobat. I am including the lengthy instructions in order to help others with more extensive installation problems. Good luck!
I live on a fixed income and use CS for a hobby. I had problem installing Adobe Creative Suite (CS1) to Windows 7 64-bit Pro on my new computer. Also installed Adobe Photoshop LR3. What I learned: All Adobe products (Flash, Acrobat/Reader, Photoshop, Creative Suites, etc.) leave a VERY pervasive footprint on your hard drive. Logic finally worked for me.... think of building a house; there is an order you have to do things in. First, you have to clean the area before laying the foundation; then you have to build the framework before you put the roof on. You cannot install an older program over ANY newer program; and you will sometimes have a problem installing a newer program containing Flash, Reader, etc. unless you "erase" the older versions of Flash, Reader beforehand. If installing older programs, do a Custom/Manual install; do not install older versions of Flash, Reader, etc. packaged with your Adobe software.
SOLUTION (not easy, but it works):
I first tried this; it did not solve my problem (but, if applicable, may help others). http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Win dows
Before doing anything, make document and any database/presets/cache back-ups beforehand (keep notes on their designated location*); manually create a System Restore point. (Be prepared to reinstall Windows if necessary - I didn't have to.)
Completely and meticulously eradicate (clean) your hard drive of ALL Adobe programs [uninstall, remove remaining folders, and remove only the registry entries that have the Adobe name attached (unless you are an expert and fully understand the other entries)]. Use this as a guideline http://kb2.adobe.com/cps/400/kb400769.html
Do a Custom/Manual reinstall of all your Adobe products *in order of release dates* (OLDEST first).... do not include Reader, Flash, etc. If your CD will not automatically run at this point, click "Open folder to view files" (use Computer/Windows Explorer, if necessary). Click "Adobe Creative Suite (or your desired program) ==> Setup.exe" (IMPORTANT: Make sure that Reader, Flash, etc. are unchecked.)
After each of your desired Adobe programs are installed, test to insure they boot up. Then download the latest Reader, Flash, etc. apps and install them (I did this in order of release date - oldest first). Do test boot(s) again.
Copy/Paste your document and any database/presets/cache back-ups into the appropriate folders (*this will vary depending on your programs and your filing system).
It has been four weeks and all my Adobe programs work flawlessly - system is stable, no problems!

I can't sync my iPad to the iTunes it's give me an unknown error message 0xe8000012 I don't know how to fix it and where is the problem could be need format or the problem is in the charging port please can any one help me

I can't sync my iPad to the iTunes it's give me an unknown error message 0xe8000012 I don't know how to fix it and where is the problem could be need format or the problem is in the charging port please can any one help me

Unknown Error containing "0xE" when restoring
To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.
From Here > http://support.apple.com/kb/TS3694

Hey guys could any one help me???

Similar Messages

Maybe you are looking for