Hey guys, i am trying to slow down the velocity on a tittle in order people can read it properly. Any suggestions?

speed = distance x time
so, to slow down speed, your clip/title has to be 'longer'.

Similar Messages

My phone just turned off and won't turn back on. I've read the posts saying to hold down the home and power button but my power button is broke. Any suggestions?

My phone just turned off and won't turn back on. I've read the posts saying to hold down the home and power button but my power button is broke. Any suggestions?

There is a thread or two about the home button and how to fix it at least temporally. It sounds like some people have found it to be a rather permanent fix. Do search on something like "Home button won't work". It has something to do with putting the charging cable into the phone and applying a little extra pressure upward on the key. Don't take my word for it though look for the thread/s. You said originally that your "Power" button was broken and the thread I have seen is about the Home Button.

After downloading Mtn Lion, I get an error msg when trying to use a link in mail. Says no associated application can be found. Any suggestions?

After downloading mountain lion, I get an error message when trying to use a link in mail. One mail account on the same computer is fine, but not the other one. Any suggestions?

I went to the Apple Genius Bar for help. Somehow when I downloaded Mountain Lion one of the mail accounts on the computer changed from an IMAP account to a POP account. The POP account doesn't enable the links in email. It was a quick fix. Just go to prefrences in your mail account and change it to an IMAP account. Hope this works for you as it did for me.

My iphone 4s keeps trying to shut down (the red bar keeps popping up) and I can only call using speaker or having headphones in.

I have no idea what is wrong with my iphone. Just this morning it started to constantly try and power down as if I keep pressing the power button on top which I am not doing. Also I talk on a call or hear a call unless i have my headphones in or it is on speaker phone. Also the very top right corner of my screen it a tad warped. I did not drop it and it didn't get wet so I have no idea what is going on. What is wrong with my phone?

Your device needs service. Something is causing the Sleep/Wake button to act like it is constantly being pressed.
If within warranty, and solong as Apple determines there is no user/accidental damage to the device, it should be free.
Otherwise, it will ocst $199 for an iPhone 4S out-of-warrantry replacement.

Magic Mouse - How can I slow down the scrolling function on Mac OS X?

I'm a designer. In Illustrator and othe programms, I try to scroll but its to fast so I flip through the pages. I want to slow down the scrolling function of my mouse but where can I find it in OS X 10.7?

Ahh,
Just the App not the support folder I'll be bound.
8:23 PM Wednesday; August 15, 2007

I am trying to convert a video clip so that i can slow down the clip speed, but i keep getting an error -34. any ideas?

I am trying to convert a video clip, already in imovie so that I can slow down the clip speed, but I keep getting an error -34. Any ideas?
Thanks!

Hi Russ,
Thanks for your response. I am not an experienced user of FC or other video editing software but if its that hit and miss I think I will go to the trouble of finding some better software - I have a busy enough life as is, I don;t want to get into second guessing what a software problem might be!
I have just successfully exported my video to a master file using one of the Apple codec options so it looks like it could be to do with the H.264 codec. I am wondering if Apples Compressor software would solve this problem - the only way to try this it to buy it, there is not trial for the compressor app. Any ideas?
Thanks
Gerry

Norton anti-virus slows down the start up time in Windows Vista

Hi,
please help, i am being driven to distraction by the slow start up time of my laptop.
I've only had it for a few weeks and don't use it for anything beyond producing word documents etc.
It has gradually been getting slower on startup and i suspect it has something to do with the Norton anti-virus software on it and the updates for norton that i have downloaded (thinking that this was the right thing to do).
Looking at the problems and solutions log on the computer the date that it really started to slow down coincides with downloading a norton update, which i have been unable to uninstall to check if this really is the problem.
Further i have tried doing a System Restore, my laptop was not able to complete.
I am stuck on the DOS screen for 10 mins with the message:
PXE-E32 FTFP open timeout
I have no idea what this means but the Problems and Solutions log says something about a system hang?
I have looked on the web for other anti-virus software and they all seem to have one problem or another and slow computers down on startup.
Does anyone know of a solution or do i just have to make a cup of tea when i switch my computer on and lace it with vodka till it has booted up completely!
I am a novice when it comes to using computers so would welcome any non-technical advice.
thanks
laura

Hi guys
I would like to add some words about my experience using the Symantec Norton Antivirus software.
I have used this software 3 year long. It was great because it supports one of the best virus filtering options BUT it really slow downs the operating system.
I didnt use it on with Vista preinstalled notebook but on Win XP and I have to say that the notebook boot process was halted for about 30sec-1min till the whole parts of Norton Antivirus software has started It was very annoying
However, I switched to AntiVir. This is software described by marina4000 and Im really happy because the boot performance increased.
So finally I would also recommend removing this Symantec Norton Antivirus software and to switch to the other free AntiVir software ;)
Bye

I just upgraded to Maverick on my2 year old Macbook Pro and it has slowed down the computer terribly. All I see is that whirling circle every time I do anything. How do I go back to old OS. Terrible upgrade -- forces you to buy a new Mac!!!!

I just upgrade to Maverick on my 2 year old MacBook Pro and it has slowed down the computer terribly. All I see every time I do anything is that crazy circle going round and round. I don't recommend you upgrading. How do I get rid of it. I believe it forces you to buy a new macbook!!!!

It does not. First things first have you tried restarting?
Try restting PRAM
http://support.apple.com/kb/HT1379
Try booting up in Safe Mode
http://support.apple.com/kb/HT1455
Also open "activity monitor" and look and see what is using a lot of processing power.

How can I slow down the playback speed of selected parts of a captivate video?

Hi everybody,
I'm pretty new to Captivate and although it offers some great tools, there is something that I just can't get to work:
I'm creating a video tutorial about how to use a website i'm working with so I've tried using "Automatic" ("Demo" mode chosen) recording option which is recommended for this type of video. However, the video recorded has a different playback speed than the amount of time I recorded. This means that some of the slides have a quicker playback speed than the way I recorded, thereby not leaving enough time to show the given feature.
The recording mode with the most "true" playback was "Full motion". However, I would still like to be able to slow down selected parts of the video, but can only find guides on how to slow down the entire presentation.
Can you please advise me on how to slow down only selected parts of the project? If this is not possible in Captivate, please advise me on which video editing software (where you can slow down the playback speed on selected parts of the video) is compatible with Captivate 5?
Thanks!

Thank you. Andrew Kramer's Video Copilot video, which I somehow managed to miss, was very helpful.
I had a 79 second clip which I precomposed and enabled time remapping. But I have 12 places where I need to slow down the layer. After a while, I was runing out of room to add more keyframes using the method promoted in many videos and instruction sites (grab the last two keyframes, including the end frame, and drag).
In reality, you can add keyframes wherever you like and you can adjust them however works best within the existing timeline without messing with the duration, etc.
Much appreciated.
Paul

How can I slow down the music of my clip?

How can I slow down the music of my clip?

Try using the following code after each time you write to the TextArea. I am assuming you are using a TextArea component and are trying to control the position of where it is scrolled to when it refreshes with the chat data.
"ta" is the instance name of the TextArea
ta.verticalScrollPosition = ta.maxVerticalScrollPosition;

Select statement from bkpf slows down the system

hi guys,
i have this syntax for this coding:
        SELECT * FROM bkpf
         WHERE bukrs = ekko-bukrs
           AND awkey = xawkey
           AND gjahr = i_ir-budat(4)
           AND blart = 'RE'.
        CLEAR: titab.
        titab-ebeln = itab-ebeln.
        titab-ebelp = itab-ebelp.
        titab-budat = bkpf-budat.
        titab-bldat = bkpf-bldat.
        titab-xblnr = bkpf-xblnr.
        APPEND titab.
     ENDSELECT.
this coding really slows down the report seleection and sytem , can anybody advice on how to select the better way

Hi Ester,
First you need to avoid the select and endselect statement by using SELECT INTO TABLE.
Second issue is u are using non-key fields in where conditions are aweky, belnr and u r not using the belnr which is first key-field in the BKPF table.
Third one is try to use the fields in correct order which it is in table say in ur where codition it should be like bukrs, gjahr, blart, awkey,....
if you dont have a input field BELNR and u need to do really improve the performance with these input fields wht you have, its is better to create Secondary index with proper sequence for felds.
But i am not sure to give permission to create secondary index bec it takes more memory occupation like what exact BKPF tbale contains, you need to permission from client people along with BASIS people.
i am give sample code :
SELECT * FROM bkpf " try to specify the internal table with exact fileds instead '*'
    into table tbl _ bkpf
WHERE belnr = w_belnr
and    bukrs = ekko-bukrs
AND gjahr = i_ir-budat(4)
AND blart = 'RE'.
AND awkey = xawkey.
If sy-subrc = 0.
sory tbl_bkpf by belnr.
endif.
Let me know if any doubts.
<b>Reward with points if useful.</b>
Regards,
Vija

HT203164 When I try to burn a cd, I get the following message "The attempt to burn a disc failed. An unknown error occurred (4450). I slowed down the speed to as low as 4x and I get the same message.

Anybody have this issue? Everytime I try to burn a disc, I get the following message " The attempt to burn a cd failed. An unknown error has occurred 4450." I tried slowing down the burn speed to as little as 4x. Please help!

Hello rcrown01,
The following articles can help get iTunes back to burning.
Can't burn a CD in iTunes for Windows
http://support.apple.com/kb/TS1436
iTunes for Windows: Additional troubleshooting tips for burning issues
http://support.apple.com/kb/TS1374
Cheers,
Allen

Slowing down clip has a strobing effect(choppy)? How can I smooth it out?

Hi guys,
When I slow down the clip, it plays back choppy or with a strobing effect.
How can I smooth it out in FCP5?
Anyone please,
Many thanks in advance,
Zia

Zia,
I would double check that the 'frame blending' option is selected. Otherwise, is the original footage interlaced or progressive? If you shot progressive and only have 29.97 frames (or less) to work with, you might want to try a plug-in. If the frames do not exist, it will probably be difficult to get a really smooth look.
Should you have shot at 30i (aka 60i), you can do some high tech stuff with a playback deck and your original tape- set the deck to progressive and the 60 fields will be tranformed into 60 frames (per second), hence giving a slow motion feel that rivals that of film. (this depends on your original media and what deck you can get your hands on)
I just did this for a music video and even the best DPs that I know thought it was film.
G5 Dual 2.0 4gigs RAM Mac OS X (10.4) FCP 5.0

I'm about to buy a 27" i-Mac. I would like to connect my 30" Cinema Display to it as a second monitor. What will I need to do that? Will this slow down the overal performance?

I'm about to buy a 27" i-Mac. I would like to connect my 30" Cinema Display to it as a second monitor. What will I need to do that? Will this slow down the overall performance?

The new iMacs do not come with a MiniDisplayPort, they have Thunderbolt, so unless you are talking about purchasing one of the previous generation iMacs such as this refurbished model in the online Apple store, it won't work. And yes, if you are going to get the full range of video resolutions you will need the Dual-Link version.
For details see the store's web page on the Dual-Link display adapter.

How can i fix my mac book pro i bought in mid 2010, it is slowing down. the pin wheel does spin a alot.

how can i fix my mac book pro i bought in mid 2010, it is slowing down. the pin wheel does spin a alot.

try this;
open disk utility - verify disk permissions - repair disk permissions if errors are found. might take an hour or less - depending on how much errors needs to be repaired.
restart your macbook and see if that sorts it out for you.
also check your hard drive space. if your hard drive is almost full, that will also contribute to your macbook getting slower....
good luck

Hey guys, i am trying to slow down the velocity on a tittle in order people can read it properly. Any suggestions?

Similar Messages

Maybe you are looking for