Hey guys i have a sure shot solution for microsoft exchange problem with iOS5
Guys,
I was facing same problem but m getting my mail frequently now. Waiting for your relpy.
Prashant Vats.
<Personal Information Edited By Host>
Hi Oliver,
On many Toshiba models, the BIOS Setup is accessed via the ESC key (if F2 doesn't work)...
To access BIOS (CMOS) Setup, follow these steps:
Turn the computer OFF, if it's on.
While pressing the ESC key, turn the computer on. Keep the Esc key held down for approximately three seconds, and then release it.
Press the F1 key when this message appears: "Check system settings. Then press F1."
If you see a Windows screen, you've gone too far.
Hope this helps,
Mike
Similar Messages
-
Solution for those having problems with Snow Leopard and drivers
I have posted what worked for me in several posts that other people had started, but because I feel I might sound repetitive and annoying, I am just posting it in this one for everyone. I hope it can be helpful. Best wishes for the year 2010
First of all, make sure you have made a SOFTWARE UPDATE before doing the following:
* Make sure your printer is connected and "on"/green light via your USB port (or other which will be recognised by your system)
* Go to System Preference
* Print & Fax
* Your printer will appear.
* Right click on the printer that is giving problems
* Reset printing system
* All printers will disappear
* Click on the + sign under this/these to add a new printer (I suppose you would have to do so for each one you have if you have more than one... not sure)
* In my case, the one that appear was 950c even though the one I have is 959. So, to make sure I would have something, I kept that, but then I click the + sign again.
* I selected the 950C, but then I checked on "PRINT USING".... THEN
* I had to "SELECT PRINTER SOFTWARE"
* I found it and that came where it said "Print using", but this time it was the right software.
* I renamed the NAME of the printer to be sure I would recognise it... LOL
I hope this is useful for all of you.If a device is an All-in-One and can therefore scan, you will find that when the printer is added, the pane on the right hand side for that device will have two headings - Print and Scan.
If the device is just a scanner, then there will be heading of Scanners in the list on the left side. Printers will typically be listed at the top of this list.
Regarding click the + (Add), if you see Protocol, etc, then you have selected the IP icon at the top of the Add Printer browser. This is for networked devices using TCP/IP. To see devices connected to your Mac via USB, then you need to select the Default icon while in the Add Printer browser.
Note that if you don't see any icons in the Add Printer toolbar, then you have it hidden. To see the icons, click the oval shaped button on the right hand side of the Add Printer pane. -
Hey Guys i have a problem with my mac since last month and it wont boot up it freezes in a grey apple logo and and spinning gear any body know how to fix this?
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
How to use and troubleshoot FireWire target disk mode
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Before reconnecting an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode.* The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see above for instructions.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it produces. Look for the line "Permissions repaired successfully" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. -
Hey guys, I have a question about Web Design
I have been trying to learn webdesign for a few months now, and so far, I am still learning HTML and some CSS. At the moment, my experience is still very thin, I am struggling with things, and I only know how to create simple, static pages. For example I still don't know how to produce "clean code". Or how one determines just how "clean" the code he has produced really is.
I was wondering if someone could answer a few questions I have:
I am still not sure how I will know when I am competent enough to work in Web Design... What are the best signs that an individual is good enough?
I was also wondering what programming language I need to know to do the following:
Create a WORKING Site Search. One like the search bar in the top corner of this page that will return search results from your website... Do I need to know how to program PHP? I've heard that you do need PHP to do this? The same goes for creating e-mail forms, and other forms like this. Do I need PHP for this?
Another thing is CMS systems like Wordpress and Joomla. What is the reason for using these as opposed to just designing a website's pages in Dreamweaver, and then uploading them via FTP to your web server?
And finally, can someone explain to me why CSS is groped like this when it is coded? Why has the Div ID "OuterWrapper" been styled multiple times?
For example: #outerWrapper #feature {
#outerWrapper #subcontentWrapper {
#outerWrapper #subcontentWrapper #rightColumn {
^ Couldnt the designer simply have styled "~OuterWrapper" once and left it at that?
Please see below:
#outerWrapper #feature {
height: 225px;
width: 880px;
margin-left: 0px;
margin-bottom: 5px;
background-image: url(images/feature.jpg);
background-repeat: no-repeat;
background-position: center top;
#outerWrapper #subcontentWrapper {
padding-right: 15px;
padding-left: 15px;
clear: both;
padding-top: 20px;
background-color: #FFF;
padding-bottom: 40px;
border-top-width: 4px;
border-right-width: 4px;
border-left-width: 4px;
border-top-style: solid;
border-right-style: solid;
border-left-style: solid;
border-top-color: #F90;
border-right-color: #F90;
border-left-color: #F90;
background-image: url(images/footer-fade.jpg);
background-repeat: repeat-x;
background-position: bottom;
height: 100%;
#outerWrapper #subcontentWrapper #rightColumn {
float: right;
width: 220px;
background-color: #DBE7FB;
border: 1px solid #DCDFE4;
margin-bottom: 15px;
Also, regarding Javascript: How exactly does one become proficient enough to learn scripting for the thousands of little widgets, and navigation bars, and other functions that Javascript can do out there?
I know a lot of these questions are strange and may be hard to answer, but I am really hoping some of you guys can provide some helpful advice/direction for me to improve with code. I studied as a Print Graphic Designer, and now it's really hurting me in this economy trying to find a job due to the fact that I lack full competency in Web Design... and the longer it takes me to get better at this, the slimmer my chances become at finding work!
I really need help on this, so I would be extremely grateful for detailed and informative answers. Perhaps some links to very good video tutorials on learning how to effectively design webpages - Common things like Javascripted navigation bars, image slideshows, how to design working site search forms and contact forms, and how to use Wordpress. I ask this because there are so many terrbile tutorial videos out there (I know from experience) and it is next to impossible for myself, a beginner, to tell the good ones from the bad.
Thankyou guys.CMS's like WordPress, Joomla! & Drupal are popular open source (PHP & MySql) frameworks. They contain all the backend PHP code needed to create a dynamic web site that contains capability for advanced functions: site search, on-line editing, shopping carts, member log-in sites, blogs with comments, scripted contact forms, and so much more...
The allure of Open Source frameworks is that they save developers time and money. Instead of building everything from scratch (which can take months), an experienced developer can usually install WordPress on the client's server and be up & running in a few hours without customizations, or in a couple of weeks with customizations. A firm understanding of PHP, how to set up a server-side database, backing up MySql, CSS theming, and HTML code are required skills to work with these frameworks. WordPress is probably the easiest to set-up; Drupal is for more experienced coders.
I am still not sure how I will know when I am competent enough to work in Web Design... What are the best signs that an individual is good enough?
You're ready when you can look at code and understand what it means/does. Being able to problem solve, identify mistakes and fix them on your own is a must have skill.
Code Tutorials - http://w3schools.com/
How to Develop with CSS?
http://phrogz.net/css/HowToDevelopWithCSS.html
CSS positioning in 10 Steps
http://www.barelyfitz.com/screencast/html-training/css/positioning/
Code Validation Tools
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb -
Hey guys i have a problem by installing Adobe Premiere Pro Cs4.
Hey guys i have a problem by installing Adobe Premiere Pro Cs4. I am german and 14 years so sorry for by bad english... I downoadet the setup, installed all the software, but when i wanted to run it the first time, adobe sayd: You have to estart your computer, if hat doesnt work ask our support...mistake (dont know what the right word for mistake code is) code is 131:4, now i hope that you can help me by installing the software in the right way!
I hope you can help me...Na was für'n Computer? Hast du den Neustart auch wirklich gemacht? Warum CS4? Klingt einfach so, als ob du das Ganze mit unzureichenden Benutzerrechten gemacht hast und somit die Installation nie richtig fertig wird...
Mylenium -
Hey guys i have the newest macbook air and i recently bought a magic mouse and my macbook doesn't detect it i already tried switching it on and off and all that other stuff. Any help??
when you have the same issue after the SMC reset:
put new batteries in the MM (even if the others are not empty), turn Bluetooth off then on again on the MBA, take all USB connections out (if any), delete the pairing of the MM and re pair the MM. -
Hey guys, i have a one year old Mac desktop which has become incredibly slow over time. Strange thing is that I have not downloaded anything save for install Windows for Mac. Storage wise the bulk of my info is stored on hard external drives. Can someow
Hardware Information:
iMac - model: iMac11,2
1 3.2 GHz Intel Core i3 CPU: 2 cores
4 GB RAM
Video Information:
ATI Radeon HD 5670 - VRAM: 512 MB
System Software:
Mac OS X 10.6.8 (10K549) - Uptime: up 0:2:53:43
Disk Information:
WDC WD1001FALS-40Y6A0 disk0 : (931,51 GB)
(null) (disk0s1) <not mounted>: 200 MB
Macintosh HD (disk0s2) /: 931,19 GB (894,98 GB free)
OPTIARC DVD RW AD-5680H
USB Information:
Apple Inc. iPad
Apple Internal Memory Card Reader
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
FireWire Information:
Kernel Extensions:
Problem System Launch Daemons:
[failed] com.apple.suhelperd.plist
[not loaded] org.samba.winbindd.plist
Problem System Launch Agents:
[failed] com.apple.Kerberos.renew.plist
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.microsoft.office.licensing.helper.plist
[loaded] com.rim.BBDaemon.plist
[loaded] com.zeobit.MacKeeper.AntiVirus.plist
Launch Agents:
[loaded] com.rim.BBAlbumArtCacher.plist
[loaded] com.rim.BBLaunchAgent.plist
User Launch Agents:
[loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
[loaded] com.zeobit.MacKeeper.Helper.plist
User Login Items:
iTunesHelper
BlackBerry Desktop Software
Bluetooth File Exchange
Garmin ANT Agent
Dropbox
3rd Party Preference Panes:
Flash Player
Internet Plug-ins:
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
GarminGpsControl.plugin
iPhotoPhotocast.plugin
JavaAppletPlugin.plugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
User Internet Plug-ins:
Bad Fonts:
None
Top Processes by CPU:
Top Processes by Memory: -
hey guys i have recorded on photobooth some .mov files which i cant play now on quick time player. any possible reasons...!!?? any other player that i should be able to play with..??
See my answere to your post in the Mt. Lion forum.
-
Hey Guys, I have Ipod Touch 2nd generation and it needs to be upgraded to iOS 4.3 but the music isnt on my computer. I don't want to loose the music but I really want to upgrade it. Help!
That iPod can't be upgraded past 4.2.1.
(71930) -
Hey guys, I have an ipad2. Am a new user of apple products. Currently am having trouble streaming movies and series online...I seem to only be able t watch YouTube video from the YouTube app installed on the iPad. Please any suggestions?
Currently am having trouble streaming movies and series online...
From where? Using which apps? -
Hey Guys, I have a IMAC G5 and I just uploaded Ilife 08 to it, the problem is, when I create a DVD it sounds good until I burn it. About 1/4 of the way through it the sound stops.. What's going on with it? Is it the encoding proocess?? I'm stumped... Help me out here!
Hi
A. iMovie'08 to 11 are not the tools of choice if one aim to do a DVD as they all discard the quality of the picture by discarding every second line in it. NO way around this due to that it happens between Event's and Project's so as soon as it is being edited - Quality is lost.
B. I use iMovie HD6 or FinalCut
C. if iM'08 to 11 is a must - THEN DO NOT - Share to iDVD - BUT - "Share to Media Browser" and as Large (or ev. Medium)
THEN DO - Save as a DiskImage and see that this plays OK and ALL SOUND
D. if added audio from iTunes - then instead in iTunes - Collect all needed Audio into a NEW PlayList then BURN this as an Audio-CD (.aiff - NOT .mp3 or other) - Then use the Files on this CD in Your Movie Project's (I do)
E. I only use .aiff audio - 48kHz 16-bit (miniDV tape Camera) or 44.1kHz Audio CD - NEVER .mp3 or .wma or other file format - ALL is converted first into .aiff - ALWAYS ! - I have very few problem with Audio in my projects in iMovie or FinalCut !
Yours Bengt W -
Hey! I have had an Ipod touch for about 7 years and it has always worked! but for some reason i plugged it into my laptop and my computer is recognizing that it is plugged in but my itunes isnt what do I do?
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem -
Does anyone have a data recovery solution for recovering photos lost after ios8 install?
Does anyone have a data recovery solution for retrieving lost photo stream photos after installing ios8 on iphones and ipads?
Does anyone have a data recovery solution for retrieving lost photo stream photos after installing ios8 on iphones and ipads?
-
Why have Apple iCloud a solution that causes more problems than it solves?
Dear All,
Steve Jobs once said that the launch of MobileMe wasn't Apple's Finest Hour" I have a sinking feeling that with the captain absent the ship has begun to drift off course. Why has iDisk been dropped, why has Syncing accross your macs been discontinued, why has there been so much talk about icloud when all it really has done is added Music and Photo syncing (thanks for solving that problem) and dropped all of the other useful features...... having to use a combination of Flickr, Dropbox and Youtube seems ridiculous given the solution was already there..... why not apply some apple brain cells to those services and make them work correctly and keep them.... all of the other 3rd party apps have proved extreemly popular, why not open up these services and make them viable as apple services, icloud has been one step forward and three steps back......not to mention the less than seamless transition from one to the other, lost calendars etc etc.
A very dissapointed, teatering Apple Fanatic.
JSo you're one of those people who looks at the world and wonders "Why"
So we are in agreement then that syncing is less complete in terms of the services you've listed than before.
You're wrong about the last point; I did follow the instructions and made my backups (luckily) then iCloud decided to delete 2 of my calendars after I did the migration..... Nothing is impossible; don't be naive.
Let me ask you a question: If you sat down with a blank canvas, is this what you would have created as a solution for Apple?
I am very disappointed with what it is and more importantly what is could have been and isn't. -
Buy my problem of camels Store Lee games possible solution for me my problem?
Buy my problem of camels Store Lee games possible solution for me my problem?
This worked for me, sort of. A while back when I downloaded that windows update that installed the new version of IE, I noticed that IE wouldn't connect to the internet and pages wouldn't load. However, I thought nothing of it because I use Firefox and FF was working just fine.
I went into IE earlier this evening (it still wasn't working) and tried to follow your recommended steps. I got up to step 4 and IE froze. I tried closing it, reopening it and repeating the steps but it would always freeze at step 4. In another thread, someone was saying that iTunes released a security update and that fixed the store for them so I tried opening Apple Software Update and that froze. I tried it several times, nothing. Would always freeze. I even tried updating thru iTunes and IT would freeze.
Finally, I went to the control panel and uninstalled IE7. The iTunes store and the Apple Software Update program are now working! So thank you very much for your suggestion. Otherwise, it may have never clicked with me that IE was the problem.
Windows XP
Maybe you are looking for
-
Error while transporting the TR to production
Dear experts, I am facing the issue of TR error while transporting it to PRD. I have already checked, the table is active both on DEV & on QUI. What should I do to transport this without any error? Thanks in advance.(Please find attached screenshot.)
-
i was using the previous version of firefox and it worked fine, the new version firefox 5 came up to down load so i did this and now when i press the firefox icon all that comes on screen is a blank firefox window....purple surround with blank window
-
I have a problem with two PDF's when trying to open them through a link on a web page. The two PDF's open fine with Adobe on my own PC and on the server I have copied it to but when they are opened through a link on a web page (pointing to the server
-
Crazy Distorted iMac display - Is it the video board?
This iMac just came to me so i don't if there were any symtoms leading up to its failure. It will only boot from CD and when it does the display completely distorted and pinched... take a look: http://homepage.mac.com/mikeneuhaus/PhotoAlbum6.html I'm
-
I have a Belkin FSD7010 wireless card in the PC slot. It is recognized as an airport extreme card. Running Tiger 10.4 TiBook 1 GHz, Airport Express wireless Everything works great except - whether I set the TiBook to join a preferred network, or auto