Hey guys, I'm having trouble matching the colour of the image back ground (white) with the pre-set colour selection. is there a tool that can help me? thanks
hey guys, I'm having trouble matching the colour of the image back ground (white) with the pre-set colour selection. is there a tool that can help me? thanks
Your description of the problem is not quite clear so I made certain assumptions. I hope I am rigtht. I believe you have a color patch such as this:
that you would like to place in an image area that has modeling in its white background. You do not want to lay in a flat color but rather to add a color and not lose the modeling or other background tone. The problem is, after making the selection, if you use Edit > Fill and set the Blending mode to Color, the white background remains white. The only colored background area may be an object's shadow or some similar area that is not pure white. (Image 2) It is an unsatisfactory result.
If that is an accurate description of the problem, consider this:
Image 1: The original image
Image 2: Edit > Fill with the Blending mode set to Color. White remains white
Image 3: Mode changed to Lab Color. Edit > Fill with the Blending Mode set to Color. Then return to RGB.
(I would not normally use this green as a replacement color but since it is a Tiffany clock, I chose a light version of Tiffany's trademark color.)
Similar Messages
-
My Ipod Touch is not responding. I have restored, I have recovered, I have followed the troubleshooting tips. It is still frozen and I can't turn it on or off. Is there anything else that can help?
Let the battery fully drain. After charing for at least an hour try a reset and restore.
-
Truly dumb question. How do I get PS to actually complete a command, eg straighten an horizon, and finalise the change. Even doing a "save as" with a new file name and reloading brings the image back, straightened, but with the skewed back ground frame still there. Is there a "apply change" or similiar command that I simply cannot see.
brings the image back, straightened, but with the skewed back ground frame
PSE did what you told it to do. Choose the Straighten and crop edges or fill edges options when you use the straighten tool if you want it to do more than just straighten the contents of the image. Many people prefer the plain straighten because they'd rather crop themselves than let PSE do it. -
Is there any tool that can display the internal structure of a F4F file?
Dear all,
I want to view the internal structure of an f4f file, Is there any tool that I can use to do that?
Thanks,
Xuedongcheck the table AUFM (Goods movements for order)
pass inputs to all the key fields.
and another table AFPO
try to use these tables.
regards,
sateesh. -
I've already tried turning it on and off as well as pressing the sleep/wake and home button together to restart but nothing has happened :/
This is also the second time its happened to my phone as well, the first time it miraculously turned on by itself after an hourHi katherian!
I have an article here that can help you troubleshoot this issue:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
Having trouble charging my IPhone4 with the charger from apple and the charger i bought from sprint. I plug it into the apple charger and nothing happens. if i plug it into the charger from sprint it says charging not compatable with this accessorie? should i take it in for repair or try a new charger??
Try a different charger pref an apple one if it stays the same take it in to be checked
-
i connected the iphone to a new itunes it told me that its restoring and itwill take 5 more hours and i did as told although i have so many things on the iphone i dont wanna lose then for my luck it suddenly opened again and it asked for the passcode please anyone help me get it is there a way that apple can open it for me and a huge proof that it isnt stolen my apple id is on it my pictures my name and everythingso please help as soon as possible and ill be more than thankful
The short answer is no. If you don't remember the passcode, there is no way around it. You have to restore the phone.
-
Is there some tools that can analys the informations creating by RDA?
When we create informations using Oracle Remote Diagnostic Agent,how can we analyse it and get some advices,the only way is send it to the Oracle supporter?I mean if there are some tools?
RDA is Oracle support tool. I don't think you can use the output file for other purpose, at least not legally.
-
I have read some of the posts and i found out that some of the Thinkpad users have the problem of unable to connect wireless network using Access Connection but not Window wireless network connection. For my case, i have connect the network with both of them. In fact, when i use either one to connect, the other would be connected too.
The problem is, sometimes when i use my wireless network, my wireless would be switched off automatically, and the wireless light is then off, and after that i cannot switched the wireless on again. I tried on it using access connection, failed. I tried Fn+F5 to on it, but no matter how many times i click on 'on', there would not be any response. The only thing i can do after this is to restart to laptop.
I called Lenovo Support to help me solve the problem, but still failed. The first time they asked me to installed some drivers and reinstall my Intel(R) Pro/Wireless 3945ABG Network Connection. These files included 79uj29us which is a bios update, 7kwc50ww which is the wireless driver installation, 7tvu12ww which is the hotkey driver update, and last 7tku03ww, a power management driver update. But the problem remains. The 2nd time i called, they asked me to uninstall my Access Connection and use window wireless connection as they may cause conflict to each other, and they asked me to uncheck the option of 'Allow this computer to turn off this device to save power' in the power management of wireless drive in device manager, but problem persists. The last time i called the technician and he said they only can check if it is a hardware problem and there most probably be nothing else they can do for my softwares and drivers, and he also believed that it might be the network configuration of my service provider that cause the problem, but i personally do not think so as it is quite hard to believe that the my service is switching off my wireless hardware and i have other laptop in my house too but they do not experience this problem.
Last night i discovered something new, when the wireless is off automatically again, i ran a test on the the wireless device using PC Doctor, for PCI express status test, it passed, for the wireless connectivity and signal strength test, results showed there was 'no connection', when it comes to network link test, it showed 'internal error', the TCP/IP network connection test showed failed. Then i restarted it and ran the test with the wireless switched off by my self, the PCI express status test passed too, but the remaining four test all showed 'no connection'.
I really hope if there is someone there to help me out to solve the problem or to enlighten me what the real problem is, could it be software or hardware problem, or could it be other problems like registry or what? I greatly appreciate if anyone can help me to solve this. Thanks alot.
Message Edited by cat_felix on 06-13-2008 09:54 PM
Message Edited by cat_felix on 06-13-2008 09:55 PM
Message Edited by cat_felix on 06-14-2008 04:15 AMI have uninstalled my Access Connection, but this problem seems to persist. IBM technician have changed the wireless card of my T60, the first few days after it was changed was very fine, no problem at all. About a week later, the problem occured again, and it happened quite frequently after that occurence. Now i really have no idea what is the cause and how to solve it. Will be greatful if there is anyone that can help me.
-
Hey so I'm having trouble changing my country/region on my iphone 5 every time it go through settings Apple ID and try change the country it's just blank ? Any ideas ?
Hello Natethemate,
Thank you for the details of the issue you are experiencing with changing the country for the iTunes Store on your iPhone. For this issue, I recommend signing out and back into the iTunes Store on your iPhone:
Sign in with a different Apple ID
Tap Settings > iTunes & App Stores.
Tap your Apple ID.
If you see the option to Sign In, you can change your Apple ID now.
Tap Sign Out.
Enter your Apple ID and Password and tap Sign In.
You can find the full article here:
iOS: Sign in with a different Apple ID in the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht1311
If the issue persists after signing out and back in, I recommend quitting and relaunching the applications on your iPhone:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
You can find the full article here:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
If you are still seeing the same issue after quitting and relaunching the iTunes Store app, I recommend restarting your phone and then resetting if it's still not working:
How to restart
Press and hold the Sleep/Wake button on the top of your device until the red slider appears. Then drag the slider to turn your device completely off.
After the device turns off, press and hold the Sleep/Wake button again until you see the Apple logo.
How to reset
You should reset your device as a last resort and only if you can't restart it.
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
You can find the full article here:
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Hey guys I am having a problem. Could you guys give some suggestion? I can connect personal hotspot from iPad 5 to iPhone 5s via Bluetooth but the wifi doesn't recognize and can't connect. USB and Bluetooth sharing of hotspot is okay but wifi doesn't
troubleshooting hotspot http://support.apple.com/kb/TS2756
-
i am having trouble signing in cause it keeps telling me to connect to the internet even tho i am connected to the internet
Please see if this helps:
https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
Thanks,
Anwesha -
I am having trouble updating Acrobat Pro 11.0 to 11.0.01. The install gets to the writing to the registry screen and hangs. Help please.
if you're on a mac, try a direct download and install:
http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Macintosh
if windows:
http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows -
I am having trouble connecting to wifi network via airport express on my windows xp pc, but I know it is working because I can connect on my macbook, does anyone know what the problem is?
Tell us more about the problem, I can think up 100&1 different reasons, but don't have time to go through all the possibilities. So.. what happens?
-
I would like to print a four sided programme, but am having trouble finding out how to organise the sections onto a 17 by 11 paper with the sections in the right order. Any help?
If all you are going to do is print double sided and them make
a single fold reducing the page to 8 1/2 x 11, one side of the
original 17 x 11 page will be page 4 on the left as you hold
the page facing you and page 1 on the right, reverse side
should be printed so top is same as top on the the first side
and will be page 2 to the left and page 3 to the right. Pick
up the double sided document with pages 2 and 3 facing you, fold
left edge to meet right edge; you should now have fold on the left
with page 1 facing up toward you, turn the page as you normally
would and pages 2 & 3 should be in order, and one more turn brings
you to page 4 and the fold should know be on the right. I hope this
explains clearly enough - if not, post back and some one should
join in with a better explanation.
Maybe you are looking for
-
My iTunes has been disabled how can i get it back?
Please tell me how to enable it again i need it badly!!
-
I am running Adobe Reader XI and IE 11 I have tried uninstalling and reinstalling and nothing works . HELP!!!
-
Nano Not Connecting to Windows
I think i have tried everything now. i did all the troubleshooting on Apple.com/support, tried resetting my nano re-installing all of the software. i just cannot get my computer or even Itunes to recognize that my nano is there. 1 time my nano said d
-
Installation of Oracle 10g Application Server in custom port or 1522
I want to install Oracle 10g Application Server in Port 1522 or some other port as in port 1521 Oracle 10g database server is already installed. But every time I try to install Oracle 10g Application Server it give the warning about 1521 port and the
-
Foreign currency valuation program picking when there is no postings
Hi experts, While doing the foreign currency revaluation through facl_fc_val, system throwing the Gl errors "posting for general ledger accout gl.155010 amount 7.58 set in batch input" while checking the gl account through fs10n there is no forei