Hey guys, i need HELP !!!My iphone 6 just gave stolen .... But i hope that can take all the photo back... Total is almost 3000 pc ... But my icloud storage just 5gb only ... If there have any ways to let me get back those photo ? Those photo really m
Hey guys, i need HELP !!!My iphone 6 just gave stolen .... But i hope that can take all the photo back... Total is almost 3000 pc ... But my icloud storage just 5gb only ... If there have any ways to let me get back those photo ? Those photo really mean a lot to me .... Have alot of memory with family ... It's very meaningful !!! Please kindly help me !!! Thanks
Please please help me, if you know how.
Similar Messages
-
Hey guys I need help I am trying to get ios 7.0.4 on my iPod touch 5 gen but every time I try downloading it it says download faild and I've rebooted it reset it and cleared storage but it still doesn't work
Try disabling the computer's antivirus and firewall.
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
- Then try on another computer -
guys, i need help. my iphone 4s lost everything. i got an email from "find my phone" saying that all will be erased. what can i do???? please help
How did u get that iphone? the original owner is screwing you via icloud account...
-
I have an external hard drive of the brand Western Digital.
Before I got my iMac I moved a lot of my important files from my PC to the hard drive and today I went on and connected it to my iMac to move my files over to it.
When it had connected a window popped up that asked if I wanted to use this hard drive with the program Time Machine and create backups. Without thinking it trough enough and reading the warning properly (I'm stupid I know) I clicked "yes". I then realised how stupid it was and cancelled the formatting of the hard drive. But somehow the program still managed to delete all my important files and can't find any way to get them back. Neither can I connect the hard drive to my PC anymore so I can't check if the files are still there (which I doubt they are since I can't see them on my iMac either).
And now I wonder: is there any way for me to get back my lost files or are they lost forever?
Thank you in advance!
//GinaA data recovery specialist or some data recovery programs should be able to help. Most format simply rewrite the directory tree saying no files are on this disk. The bits that represent the files are still flipped appropreiately so they still exists, you just don't have the location info to get at them. Secure formats and erases rewrite each bit to a zero or 1 or random so the data is then truely gone. This type of format takes a long time to complete.
I'm not making a recomendation of a particular program but here is one company that does what you ask:
http://www.remosoftware.com/mac-recovery The cost is pretty high but I'm sure they don't sell many copies and need to cover their development costs.
Good luck and don't write anything on the freshly formatted disk until you decide what to do. -
I just got a new iPhone 4S and tried to restore but it didn't finished downloading all the apps, tried to reset and restore again, but it wouldn't start over. What can I do?
http://support.apple.com/kb/ts3694
Check USB connections
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
Common errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response”, and being prompted to restore again after a restore completes.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you see your error after changing your USB connections, continue to the next section to troubleshoot your hardware. -
ok guys i need help anyone with my ipod it froze during an update now it will not work at all i ahve put it into the recovery mode or dfu and it will not reset it self it comes up with an error message 1603 the number is and says the ipod cannot be reset anyone please help me i have tryed everything googled you tubed everything
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Error 1603
Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts. -
Hey guys i need help with facetime and i am ready to blow up!
I got some many ppl telling me that i have to pay for facetime! My dad got iphone 4 and we live in canada (calgary) My brother lives in Australia and i have mac! Is facetime free to talk to him! Telus is telling us that it will cost my dad 2 dollars a min then Rogers is telling us it is free! I need help cause if both have wifi it should be free! We want to know! Please let me know! thanks! I am ready to blow up here LOL!
All FaceTime calls are over WiFi, thus they are "free", unless you're using a WiFi hotspot that charges for its use.
-
Hi there
Accualy I have 2 problems with Pages
1- How can I get more Arabic Fonts with More Decorated style
2- The typing in Arabic should be from right to left and in Pages it's Happining but the typin marker is not doing this so its hard to fix any mistakes in the middel of the paragraph.
- how to change the alignment from left to right (Ctrl + Shift in MO Word) to do the hall text from right to left not only the paragraph Icon
I think this will afect the other application Im using If some one help me with it."Many" is an exageration, you can count R to L languages on one hand.
Mostly they are used in countries which try not to pay for their software, and seem to have a pretty shoddy printing industry, so not much incentive for developers.
However Arabic is a major language and Apple should fix the problem.
As Tom suggests try Mellel, which is the best solution on the Mac.
Adobe has ME versions of both Indesign and Photoshop, for which you pay extra. They mostly work well.
MsWord for Windows (not the Mac) does reasonably well, but I have not tried its DTP features with Arabic so can't vouch for how solid they are in Word.
Peter -
I've tried many solutions they gave me but I can get Itunes to recognise my Ipod. I'm starting to get frustrated with this device,
There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
-
2014 premier pro helppp please
Discussions of RE-installing
-http://helpx.adobe.com/creative-cloud/help/install-apps.html
-using the cleaner after uninstalling and before reinstalling will usually help
-http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html -
[AMD] Hey guys, i need help to overclock
Can someone show me some timings to achieve a good overclock on this system
Msi K8n Neo 2 Plat
Amd 64 3500+ Winchester
1024 Corsair 3200+ XL Pro ram
ThanxHi ! I can recommend giving this one a read through
http://www.hardforum.com/showthread.php?t=795444
Should take you through all the steps . -
My iphone5 was stolen last night. It is offline and I am trying to track it. Icloud states that it will show a grey circle if it is offline and a green one if it is online. It is offline and it will display nothing except a picture of a phone indicating that it is offline. Not helpful at all. Any suggestions on how to locate the phone or at least the losers who stole it from my pocketbook.
Actually it is very helpful. First it tells you that two possible scenarios happened.
1. iphone ran out of battery.
2. iphone was stolen by someone who knows how to disable connection to service (just by turning it off or otherwise)
Second is more likely if you went to icloud.com fast enough. In that case we pretty soon are going to see another person here asking Apple to unlock "legitimately" purchased phone from eBay or pawn shop. And in that case recovery of your phone is very unlikely. So go report it to police to increase chances of recovery, just in case they turn up in legit pawn shop and move on. Good luck. -
I have downloaded the free trial and now can't find it. Can anyone help? I'm sure it'll be something simple but I don't know what I'm doing!
Have you looked in the downloads folder?
It's necessary to open the download package and then start the installation from there. -
Need help here! I'm out of options. Computer can't see the wireless network
Sorry for the novel, but I have to tell you what is going on with my computer. I also need to vent because I’m extremely frustrated. I want to make sure I give as much info as I can we can get this fixed. I’m done with trying to figure this out on my own!!!
I’m having a major issue with the wireless network connection on my desktop. I’ve tried everything and I can’t figure out what it’s doing.
First of all, my wireless router is set up correctly (according to the Sticky), has active security, and works fine. It has nothing to do with the router. I’m sure of it.
Here’s a quick history:
When I was at my first residence in Chicago and bought a Linksys wireless N router in May 2008. My computer was about 30 feet away from the router and everything worked fine. Always found the router and never lost connection.
I moved to a new place in September 2008 and used the same router, computer, etc. at my new place. The computer was only about 7 feet away from the router this time, but I used the wireless connection instead so I wouldn’t have a network cable lying across the floor. At first everything worked fine. No issues. Then, one day out of the blue, my desktop lost connection with the router. My router didn’t even appear as an Available Wireless Network. I rebooted everything and that seemed to fix it. OK, issue fixed, right? Wrong. It did it again the next day. I rebooted everything, but it still couldn’t find my router. It did see lots of other wireless routers in the area though so I know the wireless card was working. It just didn’t see my router.
This went on for a while. Sometimes it would see my router and connect then it would lose it again. I thought maybe it was the router going bad. Well, I have a notebook computer too so I tried it. It has found my router every time and has never lost connection. I had it sitting on top of my desktop even to see if there was some sort of dead spot in my condo, but the notebook found my router just fine.
Sometimes my desktop would see my router, but it wouldn’t be my network name. It would call it “Home” or something. I know it was my network because it was the only network with maximum (Excellent) signal strength. I’m thinking it must be some sort of association issue. For some reason it doesn’t associate my router as an available network. I don’t understand that.
I tried everything: Ad Aware, Live OneCare, registry cleaners, driver updates, restore points, pretty much anything I found in the forums. Nothing worked for long if at all. It’s like my desktop only finds my router when it wants to. Note: The only thing that would work sometimes was if I clicked “Repair.” Sometimes that would work. I finally gave up and connected my desktop via network cable and unhooked my wireless card. I never lost connection as long as it was hard-wired.
The drama continues. I recently moved to Iowa and set up my network here. I’m using the same router, same desktop and wireless card, same notebook computer, etc. I went ahead and tried the wireless card on my desktop again. It worked just fine! No connection issues at all. It connected and stayed connected. I thought, “Well, that’s strange. It must have been something with the condo in Chicago. Oh well!” It worked fine from February 5 until March 10. Now it’s doing it again!!!! The notebook is about 3 feet away and sees the router just fine.
Here are the facts:
I’m using a Linksys WRT300N Wireless-N router.
I’m using a Linksys Wireless-N PCI WMP300N Adapter (about 18 months old).
I’m running Windows XP on the custom built desktop and Windows Vista on the HP notebook.
I built this computer about 5 years ago and have not done any major upgrades for 2-3 years. The only thing I added was the wireless card. I also changed out the HD in January 2009 and did a data migration right before I moved to Iowa in February. All of the networking issues were going on well before I did the data migration though so it has nothing to do with that. In fact, I had my computer hard-wired into my router at the time of the data migration and the wireless worked fine (for a little while) after I moved to Iowa. So if anything, the data migration seemed to help with my wireless connection.
All drivers are up to date.
Using Windows Live OneCare and have run complete scan: nothing found.
Using Ad Aware and have run complete scan: only found cookies and deleted them but didn’t fix issue.
Ran WinsockxpFix but that didn’t help.
Ran TweakNow RegCleaner Standard but that didn’t help.
Right-clicking the wireless icon, I try to view Available Wireless Networks. The window comes up and shows me other wireless networks in the area (2 available right now), but doesn’t show my network at all. I click “Refresh network list” and 1 or 2 of the other networks will come up, but mine is still not shown.
I’ve clicked “Repair” and get this message: “Windows could not finish repairing the problem because the following action cannot be completed: Connecting to the wireless network.”
If I go to Control Panel, there is a Wireless Configuration Utility program from Broadcom. When I open that here is what I find:
It is not managing my wireless networks.
Under the “Wireless Networks” tab I see my Network with an “X” over the router icon to the left of it and a locked security icon to the right of it.
No information under the “Link Status” or “Statistics” tabs.
The “Site Monitor” tab shows my wireless network and the other 2 networks in the area (although they drop in and out because of signal strength). My network is always present even though the signal strength bounces up and down. This tab shows that my network is secure, 802.11 is g and n, speed is 270 mbps, Channel is 9, and Signal bounces from orange/red to green. Data encryption is (m)TKIP, TKIP, WPA-PSK.
I was going to use my notebook to post this message since it has been connected for 2 days without ever losing connection. It shows Very Good signal strength and is about 3 feet away from my desktop.
Update: My desktop just connected to my network after sitting there for 2 hours. Good to Very Good signal. Broadcom tool shows the connection and now has information in the Link Status and Statistics tabs.
Cancel that. It just lost connection again. It was only connected for about 5 minutes. There is no change in signal strength according to Broadcom though. In fact, Broadcom shows better signal now that I lost connection.
Now, it just connected again (on its own) after sitting there for 10 minutes! I’ve been surfing the web on my desktop for 45 minutes now and I’m using my desktop to post this message. What the heck?!!! This is what it’s like. Aggravating huh?
Well, that’s all I can think to write. What else do you need? Can anybody help me with this?
I’m confused. Please help!
Thanks a lot!!!
Jake
Message Edited by JakeT on 03-12-2009 02:54 PMThanks but it's just my desktop that doesn't see it though. My notebook sees it everytime, even at the same exact time that my desktop doesn't see it. For example yesterday when I was typing up this post, I was typing up the post on my notebook because my desktop didn't see the router. I don't think it has anything to do with the router actually, but I wanted to see if anyone on here has encountered this issue before. Other forums have similar issues but I've tried all of the fixes I found elsewhere and they didn't work.
Any other ideas?
Thanks! -
i have an iphone 3gs, and i keep getting blocked number calling me (prank calls) im getting really fed up with it all now i have had 12 calls from the same person! i was just wondering if there is any way i could block this caller from calling me?
Contact your carrier and ask them.
Maybe you are looking for
-
Importing 16:9 timeline in 4:3 environment
Hi! I've been working on a project for a client in a 16:9 aspect ratio timeline. Recent changes have been made and the final projection MUST be in 4:3. Is there a way to import that old timeline into a 4:3 environment without having to individualy
-
I go to photos i have already modified in LR4, now in LR6 and all i get is an annoying blue screen with a white x in it. I cannot see my work. Help!!!!!
-
How do you retrieve items using Firefox Sync
I installed Sync some time ago when X-Marks said they were no longer doing it. I have it installed and customized but can't figure out how I would retrieve my stored passwords, etc in the event I need to. I read some of the articles on the Mozilla si
-
Lightroom 5.2 DSLR video edit - spot removal
Video editing is not currently supported in the Develop module. Thanks to Julieanne Kost's Adobe TV module "Working with DSLR video", I know there is a workaround. I know that I can use a develop module preset to apply an edit from a captured frame o
-
hi, what is FD33 transaction used for? i have a report which is using BDC with a call transaction syntax to FD33...and hence it is causing performance issues in production.. my question is, is it possible to bypass this transaction and directly updat