Hey guys, im in need of seriously help. i let a friend jailbreak my iphone and now its jus stuck at the apple screen. i tried rebooting it and everything but nothin is working. does anyone have any good advice?
hey guys, im in need of seriously help. i let a friend jailbreak my iphone and now its jus stuck at the apple screen. i tried rebooting it and everything but nothin is working. does anyone have any good advice?
put the phone in DFU mode (do a search for how to do this) and restore to the latest firmware. you may have to download the firmware from apple and when selecting restore or update in itunes press the shift key and select the firmware.
Hope this helps
Similar Messages
-
Is there an on or off button for this feature, as the screen on my phone will not switch from upright to the lengthened screen when I turn the phone sideways. My phone is very new, just got it beginning of July of this year (2012). Has this happened to anyone?
ThanksIs orientation lock on?
iPhone User Guide (For iOS 6 Software) -
my iphone 3gs died and now it wont make it past the apple logo screen so i put it in recovery mode and hooked it up to my itunes on my home computer now it will say do you want to restore this iphone i click ok but then after it exctracts the software then starts to restore the screen goes black and it shuts off then 10 seconds later it turns back on it wont make it past extracting software please help me im getting really mad plaease help. it wont restore my phone and the error message 1611 come up i dont get it.. also the lock button on my iphone is broken and only works when i squeeze the topo of the iphone together so i cant put it in DFU mode
Here is what you should do turn the device on hold the home button and the power button until the device turn off keep holding and when the device reboots release the power button but hol the home button until it shows the iTunes logo then restore it
-
Hi Guys! I have an Imac with Mac OS X version 10.5.8 and bought a wireless keyboard. Unfortunately I can´t use the volume buttons on the keyboard. I have checked almost everything, does anyone have any good idea?
Hello, try kguy's solution here...
https://discussions.apple.com/thread/2332457?start=0&tstart=0
First, Go to System Preferences, keyboard, and click on the Keyboard tab
Make sure that the checkbox by "Use all F1, F2, etc, keys as standard function keys" is NOT checked.
Next, click on the Show All button, and select Bluetooth. You should see your Apple Wireless Keyboard listed on the left side of the screen.
Click once to select it, and then click the gear icon at the bottom of the box, and choose Disconnect.
Power off the keyboard by holding down the power button on the keyboard for a few seconds until it show "keyboard Off on your imac screen, then turn it back on again.
The device should appear once again in your bluetooth list.
Try out the volume control buttons now, and see if that cleared things up -
I have acrobat pro on my lap top and recently installed acrobat pro on my Mac Mini, but the text recognition function is not working, does anyone have any advice on how to remedy this problem?
On my laptop when I open up a pdf file and do a search for a particular
text phrase it prompts me to run a character analysis. Whereas on my mac
mini, when I try to engage the same process it just says it couldn't find
the phrase and doesn't even try and run a character analysis. I tried
clicking on the tool bar and the recognize text tab but nothing there seems
to do anything.
In trying to figure out the issue on my own I noticed one thing. I run a
small law firm in St. Louis and I scan in all my files to which are
subsequently emailed to my outlook account where I will save them as pdf's
to their respective folders. On my laptop when I open up an email from my
scanner I see the image of a acrobat document next to the attachment
paperclip symbol. However, when I open up the same email on my mac mini I
notice instead of an acrobat file image it shows a Preview file image (the
program used to open up pdf's before I installed acrobat).
Hope this helps!
Sincerely,
Jonathan McAllister -
I can not get NETFLIX to work, does anyone have any suggestions.
can not get NETFLIX to work, does anyone have any suggestions...
I have downloaded and installed Silverlight..
and uninstalled it and reinstalled it...
I have called Microsoft and also called Netflix support..
who advised me to call Microsoft.
Microsoft advised to to call apple
seriously?
HELP!Have you tried a different web browser like Mozilla FireFox?
Have you tried just restating your Mac? -
I have a mac book pro. Yesterday the mail app failed to open. I have tried to open it from the dock and the application folder but nothing happens. Does anyone have any suggestions to get it to work?
You don't need iDVD unless you are going to make DVDs. If you are just trying to share files, iDVD won't help you at all.
What you want to do is in iMovie, choose File/Share/File, and export that way. It creates an .mp4 file that should be readable on Macs or Windows.
You could also File/Share/YouTube if you don't mind posting them to YouTube, because of course YouTube videos are watchable by any Mac or Windows computer made in the last 10 years. -
When I updated to ios6 my phone is stuck on the loading screen. I've turned it off but nothing is working.
Loading screen is that the Apple Logo?
Try a hard reset, Press and hold the Power and Home buttons until you see the Apple Logo.
If that doesn't work, force the phone into recovery mode and restore using iTunes:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808 -
I am trying to restore factory setting on my old iphone 4 so i can send it back to my wireless company for the trade in program. I keep getting error message from apple 3014. I have tried all troubleshooting tips and still get the error message. Does anyone have any tips? Thank you
I've tried a lot of the stuff mentioned at that link and elsewhere, modifying host files etc. trying to downgrade my iPhone 4 back to 5.1.1 no luck , apple has locked up 5.1.1 for my phone and iPad . one post said I'm "stuck with iOS 6" darn I should have been more careful. I have the 5.1.1 Ispw on my MacBook its a permissions thing I don't understand. I'll post when I find a way around it and I will . iOS 6 took away most of my AirPlay functionality . to hek with iPhone 5 I'm starting to look at android. big bummer apple
-
Does anyone have any advice regarding 256 bit full disk encryption software for Macs? The other discussions on the topic are years old, so I would like some current input. Thanks for your help in advance.
Depending on your Mac, you might not want to upgrade to OS X 10.7 or 10.8 as it will not run the PowerPC based software your currently using costing a bundle to replace it all, also they will slow down your machine if it's not a more recent issue. You don't want to upgrade OS X without AppleCare defending your possibly bricked logicboard that's for sure.
Filevault encrypts the boot drive, however in doing so makes it near impossible to fix if you have a software issue and need to recover files directly or by using specialty software. Also it robs the machine of performance even more than the Lions do. So you will really need a SSD to work best with 10.7/10.8 and Filevault, then it has to be freshly installed. Filevault needs 50% free space on the boot drive, then it's going to write to the slower 50% half of the hard drive where performance is terrible compared to the first 50%.
Also Filevault is cracked under certain conditions, and if someone gets their hands on the machine (like the law) and knows what they are doing.
If you take your Filevaulted machine to Apple to fix, they are going to require the password to fix the machine obviously.
Software based encryption is vulnerable, you might want to instead place your sensitive data on external self-encrypting hardware that doesn't rely upon software or computer hacks/bypasses (ike freezing the RAM) to get to it.
http://www.datalocker.com/products/datalocker-dl3.html
Iron Keys for portable USB self encryption, both work with any computer, so your not locked into one platform.
With the senstive data off the computer and on a external device, there is the option of removing, hiding and securing the device. If used with a computer that's never connected to the Internet, it's safe from snoopers, except from a survelliance van parked outside your door. -
After moving to iCloud I can only get my email through the cloud, no new emails are making it to my home computer and .mac account. Does anyone have any advice on how to fix this issue?
Welcome to the Apple Community.
Which OS are you using. -
I downloaded photos from my camera to iPhoto 11. They were accepted as a new event. I deleted off the camera disk. Now, after going back into the events folder, the photos are not there. Does anyone have some useful advice? I've lost about 200+ photos...
You can recover the shots from the Card with an app like MediaRecover
As for the Library:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
I am using Logic Pro 9 with two MXL 990 microphones in my piano and a Rode NT1A for vocals. I have tried recording with added reverb and keeping getting not a natural reverb sound, but a rather "pixilated" one that does not sound natural. Does anyone have any ideas on how to solve this issue? I have tried using Silververb and Space Designer, and both result in the same problems. Thank you!
This is asking for the impossible! It does not sound natural because maybe it isn't and in judging so whats your reference anyway. If you are in dire need of some natural sounding room you can go and record it yourself. But even then, the chances that it sounds like you imagined it, are very slim.
There are very decent sounding reverberation plugins, based on artificial reverb generators or convolution-style, the last one is said to sound more 'natural' then the first one. Be it as it maybe, it really is like cooking food. You got all the ingredients for this delicious taste at hand and believe it or not to reach a satisfying result this is not enough, because if you do not mix the ingredients in the right proportion you will end up with a different dish you thought you'll get. This is exactly the same when one would mix audio, I dare say.
So treat yourself to some good ingredients and the rest is up to you, namely: taste and experience!
And looking at some of my past music productions I always find the same plugins for the 'ambient' task:
Altiverb by Audio Ease when I have acoustic ensembles (classical music mostly), the Sony Oxford Reverb in studio productions, Bricasti when I have to deal with drums and MMultiBandReverb from MeldaProduction for all-round stuff. Thats the base I start from, after that I can end up with dozen Reverb plugins which basically all are doing the same thing but just in a tiny different way. -
I have installed a trial of Adobe illustrator on my macbook pro. It is the 2014 release of adobe illustrator. I want to trace an image using the custom trace button.
I start a new document. Then I place my scanned pencil/colored pencil drawing, in to the document. I have tried scanning and then placing it as a jpeg, bitmap, and tiff file. I have tried scanning and then placing it, in color and in black and white. The scan mode I use is flatbed. Adobe illustrator allows me to select the default button and one of eleven preset buttons (e.g high fidelity photo), but it does not allow me to click the custom trace button. The custom trace button is grey while all the other buttons are white.
Does anyone have any ideas how I could custom trace?It seems pointless to adjust it afterwards because it is then only a couple a pencil lines rather then a full drawing. And how do I adjust it afterwards? Would I do this using the different buttons under the window button?
-
Does anyone have any good information on Responsive Search for SharePoint 2013?
I've been having troubles finding information for a responsive/intuitive search. Anyone have any ideas?
Thanks a lot!Thanks for the reply,
I mean responsive as in it takes common searches or visited pages and learns how to search more intuitively. I've been told to learn about it, and at the moment I've been looking into query roles and such. Is there anything further you would recommend for
me to look at in terms of setting up search?
Thanks for your time!
Maybe you are looking for
-
Hi Guys, We can group the similar dimensions or measures into folders in Universe which can be further consumed in other BO reporting tools. Is it possible to do the same while connecting AO with HANA? I want to group similar dimensions and measures
-
Stop pre from trying to force update to 1.3.1?
So like most other posts after 1.3.1 was dumped on the unsuspecting populace, I updated, saw none of my major bugs fixed, introduced only worse ones, and I flattened my phone back to restore back to 1.2.1 until palm gets their act together (hopefully
-
When executing actual distribution in New-GL using t-code FAGLG35, System didnu2019t generate PCA document related to it. So I transferred FI document related to it to PCA document using t-code 1ke8. How can I transfer FI data to PCA automatically wh
-
Does anyone knows how security work for MRS 610 ? Is the PD profile require for all users who wants to access Planning board with MRS 610?
-
I have two files in a directory : SomeFrame.java and MvcTester.java import javax.swing.*; import java.awt.*; import java.awt.event.*; public class SomeFrame extends JPanel { JFrame myFrame; public void SomeFrame() { myFrame = new