Hey.... i could not be able to find software upgrade in my general settings
hey.... i could not be able to find software upgrade in my general settings
To update
The Settings>General>Software Update comes with iOS 5 and later.
Connect the iPod to your computer and update via iTunes as far as your iPod model allows
iOS: How to update your iPhone, iPad, or iPod touch
A 1G iPod can go to iOS 2.2 via iTunes and iOS 3.1.3 via
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
https://buy.itunes.apple.com/WebObjects/MZFinance.woa/wa/touchLegacyLandingPage
- A 2G to 4.2.1. Requires iTunes version 10 or higher. If a Mac it requires OSX 10.5.8 or later.
- A 3G to 5.1.1 Requires iTunes version 10.5 or later
- A 4G to 6.1.6 Requires iTunes version 10.7 or later. For a Mac, that requires a Mac with OSX 10.6.8 or later
- A 5G to iOS 7.1.1 Requires iTunes 11.1 or later if you update via iTunes
Identifying iPod models
Similar Messages
-
HT4623 i can't find software update on my general settings ipod touch. how to update my ipod
i can't find software update on my general settings ipod touch. how to update my ipod
iOS 4: Updating your device to iOS 5 or later
Summary: Connect your iPad to a computer running the latest version of iTunes and your update options will appear.
Here are the last OS versions for each iPod generation:
An original iPod Touch can run iPhone OS 3.1.3
2G model: maximum iOS 4.2.1
3G model: maximum iOS 5.1.1
4G, 5G can run iOS 6. -
HT4623 I do not see the option for software update in my general settings?
I have an iPad 2 and I am trying to update to iOS 6 but do not see the software update option in general setting
IPhone, iPod Touch, and iPad iOS Compatibility
Device iOS Verson
iPhone 1 iOS 3.1.3
iPhone 3G iOS 4.2.1
iPhone 3GS iOS 6.1
iPhone 4 iOS 6.1
iPhone 4S iOS 6.1
iPhone 5 iOS 6.1
iPod Touch 1 iOS 3.1.3
iPod Touch 2 iOS 4.2.1
iPod Touch 3 iOS 5.1.1
iPod Touch 4 iOS 6.1
iPod Touch 5 iOS 6.1
iPad 1 iOS 5.1.1
iPad 2 iOS 6.1
iPad 3 iOS 6.1
iPad 4 iOS 6.1
iPad Mini iOS 6.1
You cannot upgrade wirelessly until after you install iOS 5 or later.
Upgrading iOS
1. How to update your iPhone, iPad, or iPod Touch
2. iPhone Support
3. iPod Touch Support
4. iPad Support
a. Updating Your iOS to Version 6.0.x from iOS 5
Tap Settings > General > Software Update
If an update is available there will be an active Update button. If you are current,
then you will see a gray screen with a message saying your are up to date.
b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
c. Resolving update problems
1. iOS - Unable to update or restore
2. iOS- Resolving update and restore alert messages -
HT4623 I can't find "software upgrade" in the General menu
I keep getting messages that I need To update to ios5 but there is no software upgrade in my general menu.
In the article you came from, scroll down to the section titled Update your device using iTunes and follow those directions to update.
You'll need to connect the iPad to a computer running iTunes latest version. -
is it necessary to put in sim card in iphone at the time of restore ? My phone is stolen and i am concerned that if somebody will restore it then i will not be able to find it even using find my phone.
There is no way that you can locate the iphone at all.
The thief can restore it and use it as their own. You will never know or be able to tell what they do with it.
Very sorry. Your iphone is gone.
Report it to the police and change your passwords. -
My iPad has been erased. I am not be able to find the prevues owner to use the iCloud account to activate my iPad. If there is a way please help me.
No, there isn't. If possible return it to whomever you purchased it from and get your money back. Otherwise, you have a very expensive paperweight that is of no use to you.
-
I have not been able to find any information re: the Flashback virus on the Apple website. Has Apple put out anything on this?
The ‘Flashback Trojan’:
A version of an existing Trojan Horse posing as a legitimate Flash Player installer (named “Flashback.A” by a security firm) is designed to disable updates to the default Mac OS X anti-malware protection system, potentially leaving the system open to the manual installation of other malware without any system warnings. The most recent versions bypass any user action and automatically installs itself after an affected website is visited.
http://www.appleinsider.com/articles/11/10/19/fake_adobe_flash_malware_seeks_to_ disable_mac_os_x_anti_malware_protection.html
(Adobe is aware of malware posing as its Flash Player and warns users to ignore any updates that didn't originate on its own servers. "Do not download Flash Player from a site other than adobe.com," said David Lenoe, Adobe's product security program manager, in an entry on Adobe Product Security Incident Response Team's PSIRT blog. "This goes for any piece of software (Reader, Windows Media Player, QuickTime, etc). If you get a notice to update, it's not a bad idea to go directly to the site of the software vendor and download the update directly from the source. If the download is from an unfamiliar URL or an IP address, you should be suspicious.")
Flashback Trojan - Prevention of infection:
In order to prevent a potential infection with “Flashback” Trojans, Mac users should always obtain their copy of Adobe Flash Player directly from Adobe’s official website and to disable the "Open 'safe' files after downloading" option in Safari Preferences/General to avoid automatically running files downloaded from the Internet. Also, do not turn on Java in Safari Preferences/Security. Few websites use Java. Javascript is something entirely different and should be left active.
The Flashback Trojan does not affect PPC (non-Intel) Macs, nor has it been noted to affect users running Tiger OS 10.4.11 or Leopard OS 10.5.8.
Last, but by no means least, using Open DNS is the simplest way of preventing infection in the first place. Open DNS also protects against phishing attacks, re-directs, speeds up your internet connection, and works for all users of OS X from Tiger upwards:
http://blog.opendns.com/2012/04/09/worried-about-mac-malware-just-set-up-opendns /
How to get it:
https://store.opendns.com/get/home-free
Flashback Trojan - Detection and Removal
Users with Intel Macs running Snow Leopard OS 10.6 or Lion OS 10.7 should ensure that they have downloaded all the recent Java updates from Apple, which are designed to prevent infection and also remove any infection already present.
New Macs running Lion do not have either Flash Player nor Java installed. If you running Lion and have not already downloaded and installed Java, you should download the ‘Flashback malware removal tool’ from Apple: http://support.apple.com/kb/HT5246 (356KB) which includes the same code as the Java update that plugged a security hole which allowed the malware to automatically install itself without admin authorization.
You can also use this to check whether you have been infected (for Intel Macs only) and remove it if required:
http://www.macupdate.com/app/mac/42571/anti-flashback-trojan
Flashback Trojan - Detection, and how to remove (with caution) if you are running other browsers than Safari:
http://www.f-secure.com/v-descs/trojan-downloader_osx_flashback_i.shtml -
Is there a numbers lock on iPad? I've not been able to find one.
Is there a number lock on iPad? I've not been able to find it if so?
Talk to Apple here.
http://www.apple.com/feedback/ipad.html -
I have a 2 server SharePoint farm.
All outgoing emails were working fine.
I just restarted both servers and now after that none of the emails are being sent. I am using OOB publishing workflow and it shows message:
The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
Even if I setup Alert on some list, it doesn't send email.
I have checked that outgoing email setting in CA is defined and like I said it was working fine without problems but after restart it is showing error.
What could be the cause of this and how to fix it?
EDIT
I removed outgoing mail server in CA, added again and restart IIS but still emails from OOB workflow is not being sent. But email from Alerts are being sent. Don't know what to do now.This is really weird, It works when an alert is set but workflows doesn't send emails... Can you create a simple 1 Step workflow in SPD to send an email when a specific field is set. See if this sends an email..
AJ MCTS: SP 2010 Configuration MCSA: Windows 7 If you find this post useful kindly please mark it as an answer :) TY
I created a test workflow which sends email to user and it is also not sending email. But I am getting email from SharePoint regarding "variation" page changes as well as alerts which I told above. -
I have a 4th gen. Itouch wiht IOS4 and i want to update it, but when i click the update button in ITunes it says "contacting IPod software server" and it looks like it is loading. However, after about 5 seconds it stops and says "ITunes could not connect to the IPod software server". I found the apple webpage that is supposed to help me, but when i went to the LAN settings in the control panel i found that 'Automatically detect settings" was already checked. I do not know what to do, Please help.
If yo mean the iPod will not connect to your wifi network:
Does the iPod connect to other networks?
Do other devices now connect?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Hi friends,
i have tried to install ms sql 2012 on windows 8.1 pro 64 bit but it got failed due to the following error 1406 Could not write value to key \SOFTWARE. Verify that you have sufficient access to that key, or contact your support personnel..
I had run the set up file as administrator. I have ony one user account on my laptop. I have seen in the regestry about permission of user. There is full control to the user. I have also tried the solution related to this issue that are available in
this forum and other.
I have also attache the detail.txt log file here
So i am heartily requesting you guys if you have the solution then please post your solution as soon as possible.
Thanks in advance!!!Looks like this is a permission issue with account you logged in in your operating system or account if any you chooses to run you SQL Server installation . Or for executing setup file try using run as administrator.
http://www.sperrysoftware.com/kb/questions/7/How+to+Troubleshoot+a+%22Error+1406%3A+Could+not+write+value...%22+or+%22Error+1406%3A+Could+not+write+InstanceIndex+to+key...%22+error+message
http://support.microsoft.com/kb/913559
Raju Rasagounder Sr MSSQL DBA -
Please see the subject line thanks
I upgraded to 20gb iCloud but it isn't enough to back up. I get constant error messages saying there is no backup space and I've not been able to use the upgrade. Apple promised to refund then didn't. Please help is there anyway I can use this space?If you were told they would refund the price for the iCloud storage - Contact AppleCare and ask to speak with a senior advisor. Have the case number for the promised refund available.
If you are trying to update your device, but you don't have sufficient space to download and install the update, you need to delete content from your device. Buying storage in iCloud does not add space to the device which is what you need.
You can always update using a computer with iTunes installed - this method is faster, and will allow you to make a backup on the local computer (Local backups restore faster than iCloud backups).
HTH -
Why is that my phone could not activate after updating a software?
why is that my phone could not activate after updating a software?
givenfor wrote:
why is that my phone could not activate after updating a software?
Since we don't have a crystal ball, its very hard for anyone to tell you why it might not activate if you don't provide details...
What happens when you try? What error message do you get? Was the phone previously jailbroken or unlocked? -
SQL Server Management Tools - Could not write value to key \SOFTWARE. Error code: 1406
Detailed Results:
Feature: Management Tools-Basic
Status: Failed
Component Name: Sql Server Management Studio
Component Error code: 1406
Error Description: Could not write value to key \SOFTWARE. Verify that you have sufficient access to that key, or contact your support personnel.
The first time the installer worked installing perfectly, but I needed an named instance of "SQL2008", so I removed the instances. After this re-installing is not working.
From past 3-4 days I went through most of the links which has provided solutions for error code 1406, and not having success for installing.
I have tried these options,
1) Ran the installer using "Run as Administrator"option. I am an Administrator user for the machine.
2) In Registry Editor, right-click HKEY_CURRENT_USER\Software, and then click Permissions. Click Add, type Everyone, and then click OK. Under Group or user names, click Everyone. Under Permissions, click to select Full Control in the Allow column, and then
click OK.
3) Uninstalled the Sql server product, and used Revo Uninstaller / CCleaner to clean the registry and the remaining files and folders.
4) Multiple versions of SQL installers have been tried (SQL 2008/2012/2014)
5) Logged in as local/Administrator for the machine, tried the similar steps.
6) The same installers are still working in one of the virtual machines for multiple times of installation and uninstallation without having any problems.
Please let me know, if needed further information. Please provide help for installing SQL server management studio.
Regards,
Ananth.I have the same problem.
I can not install MSSQLManagementStudio. I suppose
that is not the fault of permissions
. I have tried to
install as an administrator
on the computer in the domain where the account has domain administrator permissions.The account is added to the local administrators.
I also have tried to install as local administrator
account after the removal of the domain.
With the same result.
Operating System Windows 8.1 Prof.
I have tried 2012, 2012with SP1 , 2012x86 , 2014. All with same result:
Product: SQL Server 2012 Management Studio -- Error 1406. Could not write value to key \SOFTWARE. System error . Verify that you have sufficient access to that key, or contact your support personnel.
Other elements installs without any problem.
sql_ssms_Cpu64_1.log show that the problem is in that point:
MSI (s) (1C:C0) [10:32:51:834]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWARE\Microsoft\Microsoft SQL Server\110\Tools\ClientSetup,,BinaryType=0,,)
MSI (s) (1C:C0) [10:32:51:834]: Executing op: RegAddValue(Name=SqlToolsPath,Value=C:\Program Files (x86)\Microsoft SQL Server\110\Tools\Binn\ManagementStudio\,)
MSI (s) (1C:C0) [10:32:51:834]: Executing op: RegAddValue(Name=Path,Value=C:\Program Files (x86)\Microsoft SQL Server\110\Tools\Binn\,)
MSI (s) (1C:C0) [10:32:51:834]: Executing op: RegAddValue(Name=SQLPath,Value=C:\Program Files (x86)\Microsoft SQL Server\110\Tools,)
MSI (s) (1C:C0) [10:32:51:834]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWARE,,BinaryType=0,,)
MSI (s) (1C:C0) [10:32:51:834]: Executing op: RegAddValue(,,)
MSI (s) (1C:C0) [10:32:51:834]: Note: 1: 1406 2: 3: SOFTWARE 4: 5
MSI (s) (1C:C0) [10:33:19:949]: Product: SQL Server 2012 Management Studio -- Error 1406. Could not write value to key \SOFTWARE. System error . Verify that you have sufficient access to that key, or contact your support personnel.
Error 1406. Could not write value to key \SOFTWARE. System error . Verify that you have sufficient access to that key, or contact your support personnel.
07/30/2014 10:33:19.949 [540]: Assembly Install: Failing with hr=80070005 at RemoveDirectoryAndChildren, line 396
...... rest of the roolbaack next
As i the lines:
MSI (s) (1C:C0) [10:32:51:834]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWARE,,BinaryType=0,,)
MSI i opening the root hive of HKLM/Softftware
and MSI (s) (1C:C0) [10:32:51:834]: Executing op: RegAddValue(,,)
and trying to Add Default Value.
What is impossible regardless of the
level of permissions.
Please provide help for installing SQL server management studin in any version
Regards,
Michael -
When trying to download apps to my ipad, I get a message saying a secure connection could not be established and to check my date and time settings. Can someone tell me what this means and how to fix the problem?
It's a POP account. I decided to clean up my mailbox today after noticing the computer was real slow after USA Today started sending their daily top stories with new graphics. Also before I noticed the problem with mail deletion - two things happened. 1) I updated security sofware as prompted by Apple and 2) downloaded Mackeeper and went throught some preliminary scans but did not buy their package. Thanks forn nstaying with me.
Maybe you are looking for
-
I can no longer record video on my iPad since the upgrade!
I went to record something on video this morning, and tapped "video" on my screen, and it did nothing. Can't seem to activate the record video button since the last upgrade of 07!
-
Totalling rows based on cerain input in a cell
I have a table that you can add or remove rows by clicking a button. in the row is a drop down box of different departments. another cell is a numerical field. I want to have a total box for each department, but am unsure of how to code this. For
-
How does the copy button work in safari for ipad (copy button under facebbok share button)?
How does the copy button work in safari for ipad (copy button under facebbok share button)?
-
Exchange rates Gand B in Purchase order
Hi, while doing P.O the exhange rate will come from exhange rate type M, now my client wants when they do IMPORT Purchase order the exchange rate has to take fro exchange rate type G(bank buying rate) and while doning Export P.O the exchange rate has
-
Hi Experts, Can anybody tell me the TCODE to see employee master data like employee start date and end date.