Hey I have a problem with word
I have 1 problem if I become my resistant for apple in become for windows become store has to he does 1 problem does want that it is in windows becomes but 25 page of 92 shows what must I do? institutions of my become 1997/2004 rises file adapt? What
This is not MacBook Pro forum but "tower/workstation" Mac.
http://www.apple.com/support/macbookpro
For help with MS Word/Office check the Microsoft MacTopia and their own support forums.
Similar Messages
-
hey i have this problem with my mac.. that its on its own shuts itself whenever i m using google chrome..i updated to yosemite but the problem never ended and i m experiecing unexplained shutdowns
Hi doctor.saddam,
If your MacBook Pro is shutting down unexpectedly, I would suggest that you troubleshoot using the steps in this article -
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L -
This is what it says
Microsoft Error Reporting log version: 2.0
Error Signature:
Exception: EXC_BAD_ACCESS
Date/Time: 2014-02-23 07:52:59 +0000
Application Name: Microsoft Word
Application Bundle ID: com.microsoft.Word
Application Signature: MSWD
Application Version: 14.2.0.120402
Crashed Module Name: libobjc.A.dylib
Crashed Module Version: unknown
Crashed Module Offset: 0x000044a7
Blame Module Name: MBURibbon
Blame Module Version: 14.3.9.131030
Blame Module Offset: 0x0001007c
Application LCID: 1040
Extra app info: Reg=en Loc=0x0410
Crashed thread: 0You might want to try asking your Office for Mac question in the Office for Mac forums located here: http://answers.microsoft.com/en-us/mac
-
Hey,, I have a problem with my I'd I can' remember my security question
I need your feedback ASAP please
Have you updated them recently or is this Apple looking to update. If he latter, go head, put in any answers you like BUT DO KEEP A RECORD.
Otherwise, you can overcome the problem through this link - http://support.apple.com/kb/HE40 -
hey everyone.. i have a problem with my 3Gs iphone.. i updated to the ios5 and now when i open it says that i have to connect it with the itunes. when i connect it says that has an error 28 something like that.. can anyone help me to fix it?? Regards
Error 23, 28, 29: These errors may indicate a hardware issue with your device. Follow the steps in this article. Also attempt to restore while connected with the white USB Dock Connector cable that shipped with your device, on a known good computer and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value, (00 499901 064000 0), can also confirm a hardware issue. Out-of-date or incorrectly configured security software can also cause these errors.
-
Friends,
i have a problem with safari . Whenever i am typing in the safari main bar , so in the halfway through the typing my sentence/words are shifting to another main google search and in the end i have to type again in google. I have attached a sample screenshot of the safari problem which i am facing. In this particular example i wanted to write Print Screen, however halfway,my typing automatically shifted to google bar?? can you guys help me.Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this test is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault in OS X 10.7 or later, then you can’t enable the Guest account. The "Guest User" login created by "Find My Mac" is not the same. Create a new account in which to test, and delete it, including its home folder, after testing. -
I have ongoing problems with "application not responding" in various programmes, ie Word, Excel, Illustrator, Photoshop, iPhoto etc. I recently subscribed to CC but the problem still persists. Any advice please? This applies to my iMac and my macbook air! I'm using OSX Version 10.9.3
Hi Shauneenb,
Welcome to the Apple Support Communities!
If you are having issues with multiple applications becoming unresponsive I would suggest the steps in the following article, including starting in safe mode.
OS X Mavericks: If an app freezes or quits unexpectedly
http://support.apple.com/kb/PH13975
I hope this helps,
-Joe -
Hey guys!! i have a problem with my i touch 2nd generation...
hey guys!! i have a problem with my i touch 2nd generation... when i plug in my computer doesnt happen and i cant sync with itunes but when i plug it in my imac's sister work properly
Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows -
Why can I all of a sudden not purchase on Cand Crush and on Words With Friends?? The credit card company has NOT stopped anything. I have no problems with other iTunes purchases!
Contact iTune Support
https://ssl.apple.com/emea/support/itunes/contact.html -
hey !
I have a problem with my iphone 5s IOS 8 , my notification center does not scan when the screen is lockedsounds like a hardware failure. Return the phone to Apple.
-
Hey Guys i have a problem with my mac since last month and it wont boot up it freezes in a grey apple logo and and spinning gear any body know how to fix this?
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
How to use and troubleshoot FireWire target disk mode
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Before reconnecting an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode.* The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see above for instructions.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it produces. Look for the line "Permissions repaired successfully" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. -
I have a problem with my billing information.
If you mean the security code on the back of the card, then is the address on your iTunes account exactly the same (format and spacing etc) as on your credit card bill : http://support.apple.com/kb/TS1646 ? If it is then you could try what it says at the bottom of that page :
If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorizations have the correct information on file.
And/or try contacting iTunes support : http://www.apple.com/support/itunes/contact/ -
I have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7 PC. For several years,
I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months ago I decided to use Mobile Me. However, there were problems with duplication of calendars and then “rogue events” – which could not be deleted – even if deleted on Outlook and on the iPhone (or both at the same time) – they would just reappear after the next synchronisation. All other synchronisation areas (eg Contacts, Notes etc) work fine.
I have looked for help through the Apple Support Community and tried many things. I have repaired my Outlook. I have repaired my .pst file in Windows. I have re-installed the latest version of iTunes on my PC. I have re-installed the firmware on my iPhone. I have tried many permutations on my iPhone. I have closed down all Mobile Me functions on the iPhone. I have spent upwards of 24 hours trying to solve this problem.
What am I left with? Outlook works seamlessly on my PC. My iPhone calendar now has no events from my calendar, but does not synchronise through iTunes. Nor does it send events initiated on the iPhone to the Outlook. I am at the point of abandoning iPhones and iPads altogether. I need to have a properly synchronising calendar on my phone. Do you have any suggestions?In the control panel goto the "Lenovo - Power Manager" and click the battery tab, there is a maintenance button in there that will let you change the charging profile for your battery. (from memory, so exact wording may be off)
The lower the numbers you use there, the longer the battery *should* last. These batteries degrade faster at higher charge levels, however storing them at too low of levels is also not good for them... I've read that 40% is optimal, but just not realistic if you use your computer.
--- ThinkPad T61 / Win 7 / Core 2 / 4gb RAM / Nvidia / Still used daily --- ThinkPad Edge 15/ i5 / Win 7 / TrueCrypt / 8gb RAM / Hated it, died at 1 yr 1 mo old --- ThinkPad T510 / Win 7 / TrueCrypt / i5 / 8gb RAM / Nvidia / Current primary machine --- ThinkPad X220 / i7 / IPS / 4gb / TrueCrypt / My Road Machine -
I have a problem with the keyboard on my MacBook. The letters are typing as symbols and the delete and return/enter buttons do not work. Does anybody know how to fix this?
Hey skyshade13,
Thanks for the question. The following article outlines how to restore a previous iTunes library should there be no content after updating. While the article does not speak specifically to your symptoms, attempting the steps by utilizing the "Previous iTunes Libraries" folder may resolve your issue.
No content shows up in iTunes after updating
http://support.apple.com/kb/TS1967
For further information see the following information:
OS X Lion: iTunes opens to "created by a newer version" alert
http://support.apple.com/kb/TS3918
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/HT1451
Thanks,
Matt M. -
Hello. I have a problem with my Photoshop Elements 12 programm. I had restart my computer and I wanted to instal my Photoshop Elements 12 again but the sytem didn't accept my serial number. I get no answer per Mail and I didn't reach someone on my phone. Can you help me please? Thanks a lot Nana
1) Apps are not part of the backup, only data stored by 3rd party apps. But you can redownload the apps for free again if you use the same account you did when you bought them the first time. http://support.apple.com/kb/HT2519
2) See this article http://support.apple.com/kb/HT1766 and find out what's in your backup.
3) Backup your itunes+ library (http://support.apple.com/kb/HT1382 and http://support.apple.com/kb/HT1751), which will copy your Mobile Applications folder, and save your iphone backup folder as well
In other words, maintaining a backup of your computer is essential.
When you resync your apps from your computer to the phone, make sure your computer is authorized again. http://support.apple.com/kb/HT1420
Maybe you are looking for
-
I would like for me, excuse my bad English (google translation), but I hope that you sent me still can help! I have an iPod nano 8GB bought, now I wanted to iTunes on my Windows Vista Home install. Unfortunately I always get the following error messa
-
Problem with different calendars under Mountain Lion
I upgraded recently from Snow Leopard to Mountain Lion and experiencing an annoying problem with the calendars "On My Mac" (I am using a MacBook Pro from mid 2009). With iCal under Snow Leopard I had seven calendars - Meetings, Performances, Family,
-
HTTPS requirements for Private Distro iOS 7.1
A warning to anyone who uses private distribution, iOS 7.1 requires the hosting URL to be HTTPS and appears to require a valid SSL cert. The change took me by surprise this afternoon.
-
The navigation key left/right works strike when i'm editing a persian text messege! My phone is already updated. There are no viruses, no any other programs installed on my phone... What's wrong? What should i do? Thanks...
-
I am having a problem getting Elgato EyeTV (DVB-T Sick) to load. iMac can't locate USB2 port. Thinks it is USB 1. Hence no signal. Everything checked re antenna and Elgato check list. Someone suggested warming up the Pinnacle stick. Not tried this ye