Hey i have a question regarding the apple ipod and return which hopefully--
could be easily answered.'
Hey my name is Isaac. I am an earlier buyer of the Ipod got it a week or two into sales. When i got my ipod at first it would freeze way too often. My case is to plead for another one although it wasn't successfull,(apple service) well anyway so my screen is pretty bad right now so, scratches are horrible. the case which the ipod came with didn't work, so it's getting hard for me to watch anything on the video, plus there's a couple of dead pixels. So the problem is do you think they'll send me another one, for retutrn of course
ps-heard ther tardin in nanos which are scratched so this is a big question,
thanks so much a reply is greatly appreciated,
thanks again
Isaac
ps-heard ther tardin in nanos which are scratched so this is a big question"
This is more myth instead of fact.
Dead pixel issue:
IPOD Missing Pixels - http://docs.info.apple.com/article.html?artnum=22194
Apple will not replace an IPOD because of scratches. How bad are they?
Similar Messages
-
Using blend modes with adjustment layers. I am having trouble getting the results I want by using a screen or multiply blend modes with adjustment layers. When I use the brush to reveal the hidden image, I am not gettting consistant darkness or lightness. I only have one photo open but it seems like I am getting data or colors from somewhere else. Anyone else have a problem like this?
A screen capture showing your document structure and problem in Photoshop may help get and answer.
-
I have 2 questions regarding the iphone 5. 1 How do i get my yahoo mail set up. I tried the setting it up as both a yahoo mail and other mail. 2. I seem to have lost my notes on my iphone 5 but I have them on my ipad. How can I use cloud to sync my notes?
I will address your second question.
First, make sure your iPhone and iPad have absolutely identical Apple IDs. If they do, use that Apple ID in Settings > iCloud on your iPhone to select the "Notes" option. Lo and behold, all your iCloud notes should appear on your iPhone. -
I have just got my iPad2 and am very pleased with it. I have a question regarding the monthly (recommended) battery full charge. Should I let the battery completely die down to nothing at all before I plug in to recharge or would this complete drain be bad for my iPad?
It's not bad for it - on this page www.apple.com/batteries/ipad.html it says :
For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down). -
Hello, I have a question regarding the sharing on iMovie. I have just recently purchased an Elgato Gaming Capture HD and I then finished my recording with that and put it into imovie. I worked long and hard on the project and when I go click the share feature on iMovie all the noral options pop up and when I actually click where I want to share it to nothing at all happens. If you know what is wrong/ what I am doing wrong please let me know.
Thank you.
PS: I am using iMovie 10.0.6./*line 957 error */
public void select()
for (count = 0; count <= p; count ++ )
if(P[count] != null){ /* validation */
m = (int)(P[count].getX());
n = (int)(P[count].getY());
if (Math.pow(-1, m + n) == 1)
piece[m][n].setBackground(wselect);
else
piece[m][n].setBackground(bselect);
step = 2;
} -
Ever since I uploaded i0s7 I haven't been able to receive I messages or face time. I have took it to the apple store and they couldn't figure it out. I have also followed the trouble shooting from I tunes and still can't get it working
Hi,
Strikes -
Go into compositionReady and have 3 variables you will be able to set them like this
strike1 = 0;
strike2 = 0;
strike3 = 0;
So on the wrong item click have
if(strike1 == 0) {
PLAY STRIKE1 ANIMATION
strike1 = 1;
else if(strike2 == 0) {
PLAY STRIKE2 ANIMATION
strike2 = 1;
else if(strike3 == 0) {
PLAY STRIKE2 ANIMATION
strike3 = 1;
So this will make it so when the wrong item is clicked each strike will be played in order.
Random Scrolling -
You should look into the Math.Random function to make things random in edge.
This is an example of the Random function. It will generate a random number up to 100.
var random = Math.floor (Math.random () * 100);
Lose Screen Score -
So we can create another variable in compositionReady for the lose score.
score = 0;
Now when the user gains a point to add to the score you could do this code on the click
score++;
which would add 1 to the score, However you can add however much you like to the score doing "score + 2" and so on.
To edit a text with the score at the end which I'm assuming you will want to do you will use .html
so $("Text").html("You score is " + score);
I hope this helps! -
Hi, umm so anyways my ipod is about 2 years old now and i think the reason why it started to malfunction in the first place was because i had too much stuff on my ipod, apps, movies, and junk. But now i took it to the apple store and they were able to restore my ipod but when i go home it goes bad again and i try ot restore it on my laptop and it says it can't restore it. (11) and another thing is that when i try to turn my ipod on, it turns on to the apple logo then all of a sudden theres suppose to be the unlock screen but instead a black screen with a tiny loading sign in the middle and it keeps buffering and it never turns on. and then it shuts off with a white screen and then does the same exact thing for like 10 minutes. please help me. I dont know what to do. and my dad will be very ****** if it cant be helped..D:
Maybe here:
http://www.windowserrorhelps.com/itunes-error-11-how-can-i-fix-itunes-error-11-i nstantly
Is the iPod jailbroken? -
I Have a Question About My Apple iPod Touch 64GB 5th Generation
ok I Do have a 5th Generation Apple iPod Touch 64GB & I Need Help or just needed to ask a Question ok, when I Turn on My Apple iPod Touch 64GB or when I Turn on The iBlason iPod Touch Battery Charger I Have on it to Turn on The Apple iPod Touch 64GB Well when I 1st Turn it on it's Taking 1 or 2 Secounds Longer to Turn on & I Wanted to know if that Normal??? or is it mean that My Apple iPod Touch 64GB is going to Die??? that was a Question i needed to ask
also a Few Day's ago when I Wanted to Turn on My Apple iPod Touch 64GB it did not even want to Turn on or do anything & I Never Shut it Down or Turned it off???
I Was reading on the internet about this problem & it said that I Had to Restart My Apple iPod Touch 64GB & I Did & Everything went back on again so just needed to get info about this problem if anyone knows about this???Things like that happen and is normal.
If you can't turn it on:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I have a question regarding the iPod Touch and iPhone batteries.
Hello,
I started asking myself questions lately about my iPod Touch 5th generation battery. A few months ago, when a friend of mine asked me to plug her iPhone 5S in the wall (the battery depleted), I noticed that her phone was at 1% of battery power. Then I compared my iPod Touch battery with her phone's battery, and discovered that my iPod Touch stops working when the battery is close to 10% battery power. This is concerning to me because I feel like I only have about 85-90% of battery power available when I use my iPod Touch, while my friend has over 99% of battery available. It's a huge gap, I can't use this 10% that I wish i had. I'm wondering why iPods can't stop functioning when the battery is close to 1% instead of 10%? Can you imagine not being able to use 10% of your battery! And it was like this since iOS 6.1.3. My iPod Touch would shut down automatically when the battery would be depleted, but in reality, it still had 10, maybe 15% left. Why is that?
Thank you.Hey Lil'fighter, First, stop comparing an iPod with an iPhone. They may look a like on the outside, share the same iOS, and some of the components, but that is as far as it goes! The biggest reason your friends iPhone out last the iPod is a bigger battery, greater capacity. Secondly, the phone is configured a bit differently and uses power a little more effectively. Third, it is impossible to completely drain the battery in either device. A safety circuit prevents you from doing that. With Li-ion batteries if you completely drain one, it will de-ionize and become useless; never charge again. I suspect the threshold is set higher for an iPod then on an iPhone. But if you feel your iPod is not performing as it should, and a reset or restore does not improve function, then by all means take it to Apple and have it evaluated. Hope this helps. Cheers.
-
I Have 1 Question About The Apple Discussion Message Boards?
I Think Apple.com & Apple Discussion Message Boards needs to come up with an Apple App for Apple iPhone & Apple iPod Touch 1 reason is cause I Try to go on The Apple Discussion Message Boards on My Safari on My Apple iPhone 4 32GB from Verizon Wireless & The Internet is very Slow on there so maybe if Apple.com & The Apple Discussion Message Boards had an App Specialty for The Apple Discussion Message Boards for Apple iPhone 4 & Apple iPod Touch maybe then The Apple Discussion Message Boards will Run more Faster cause My Apps for My Apple iPhone 4 32GB From Verizon Wireless are always faster then The Internet on My Apple iPhone 4 in Safari, I Hardly use My Safari in My Apple iPhone 4 cause it's always slow, Sometimes it's Fast but sometimes more it's Slow, so maybe I Thought we should make an Apple Discussion Message Boards iPhone App for Apple iPhone & Apple iPod Touch? it was just an Idea it was more a Suggestion to come up with an iDea of it & I Did not mean to post this in the wrong forum if I Did? Maybe My iDea's & Suggestions may not be great? but at least I Tried, you don't have to come up with any Apple Discussion Message Boards Apps if you don't want to? it's really up to you or whoever creates this part of the Forum? i'm only trying to give you some help or Suggestion or an iDea whatever you call it & i'm sorry for posting this when i know it will get deleted maybe? or maybe in The Apple Discussion Message Boards we can have a Apple Suggestion Forum for Future iDea's or whatever it may be that you want to call it? maybe some people would like to post there Thoughts & Suggestions & Future idea's to Apple on here of what they would like & want to see as long as there is no Bashing & trashing & arguing with each other & i'm sorry if I Got carried a way to much if I Did? just thought I Would have a Suggestion/Idea on an Apple Discussion Boards App for Apple iPhone & iPod Touch maybe someday on The Apple iTunes in The App Store? but if you don't think my Suggestions are so great? its ok i'm Sorry I Bothered anyone on this Forum about this, ok peace & take care from Byron.
Apple sells unlocked iphones now.
They can be used with any compatible/GSM carrier.
Iphones are not compatible at all with Sprint.
T-Mobile is currently being purchased by AT&T. -
I have some questions on the PowerON Reuse and Recycling system
My iPhone 5 is in very good codition, and I went through the questions on Apple's website, resulting in a $355.00 evaluation, which I think is quite fair. However, the payment comes in the form of an Apple Gift Card. I'd really like to put that money towards the iPhone 5S, but it seems the only way possible to do that is send off my phone and be without it for however long it takes to get the Gift Card. Is there any way I can use this service and not have to go days without my phone?
I don't get an upgrade until January, so I don't plan on getting the new iPhone the day of its release. I'm not sure if that matters.
Thanks for the help!As users ,what do you want us to say ,
Suggest you go in and discuss with the Apple guys at a Retail store -
Pls i need your support regarding to this
You need to contact Apple. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
(92876) -
I have a question about the new ipod touch
I just got a 32GB ipod touch a week and one day ago and now i hear that a new one with more features is coming out. This is'nt fair since the new one has more features but costs $100 less than when i bought mine. Since i bought it recently is there anyways i can return it and get the new one instead? My ipod is still brand new without any scratches at all since i put a case on it as soon as i took it out of the box.
I purchased a refurbished iPod touch 8g about 10 days ago. I am thinking of sending it back. The question is it really worth the hassle? In Canada the 8g is going to sell for $259. I think I will loose 10% restocking fee plus shipping it back. Thoughts ??
Is it worth it?
Should I just upgrade the software and call it a day? Or get the new one.
Ideas...thoughts...opions???
Tug -
Question regarding the Transformation activity in BPEL
Hi,
I have a question regarding the Transformation activity in BPEL.
I have a database adapter that uses a PL/SQL API. The API returns two tables of nested objects and it automatically generates a schema for me based on the outputs structure. I need to use the Transformation activity to map both these out parameters to root element in the destination.
The element in the destination is "unbounded". Please take a look at the following screen shot -
http://www-apps.us.oracle.com:1100/~rvishnuv/transform1.gif
From the screen shot, you can notice that I have two XML segments X_TEST_TBL and X_TEST_TBL1 in the source and I have one GLOGXMLElement ("unbounded") in the destination. I need to map each of the source elements to the same destination. Then internally, I will be mapping the elements of X_TEST_TBL to "Location" segment/element and the elements of "X_TEST_TBL1" to "ItemMaster" segment/element. If I try to use "foreach" and map second
element "X_TEST_TBL1" also GLOGXMLElement using the foreach, I get the following error -
http://www-apps.us.oracle.com:1100/~rvishnuv/transform1_error.gif
Let us say my X_TEST_TBL contians two records and X_TEST_TBL1 contains one record. Is there any way that I can use these two out parameters to map to the same destination (GLOGXMLElement) so that my final document contains multiple "GLOGXMLElement"s that represents data from both the output parameters? i.e. there should be in total of three occurances of GLOGXMLelement in the output document such that two occurances correspond to data obtained from X_TEST_TBL and one corresponds to data from X_TEST_TBL1.
Please let me know if there is any way to achieve this.
Thanks
RaviIs the listed $200 credit towards a trade-in on top of the original trade in value of a phone, or the maximum amount?
-
Question regarding the pen tool (w/ picture inside)
Hello everyone! I have a question regarding the pen tool. I think this picture is very helpful for my question:
So in this pic is an orange rectangle and within that rectangle is a blue stripe. I would like the blue stripe to be perfectly flush (not over, and not under) the edge of the rectangle. For example, on the bottom end of the blue stripe, you can clearly see that the stripe does not extend far enough to the edge of the orange rectangle. At the top of the stripe, it goes a little bit over (a bit hard to see). I work with some complex shapes when using the pen tool and it is really slowing me down to compensate for over/under shapes. If it could just snap to the borders of other shapes it would make my life a lot easier. Thanks for reading and please help!A couple of thoughts come to mind:
1. You could create the shape "face on", using guides, and the points will snap to guides with snap enabled. Then you could transform the whole thing together by selecting all the shape layers.
2. Holding down the shift key while dragging a point seems to cause it to snap to some things under some conditions. However, on having just tried to recreate what you're showing I didn't see the proper snap happening sometimes.
3. There's the full manual approach, of course where you zoom into thousands of percent and move the points by hand manually. I assume this is what you're trying to avoid.
-Noel
Maybe you are looking for
-
Base Unit of Measure as Navigable Attribute
Any idea how to make the Base Unit of Measure 0BASE_UOM a navigable attribute for 0MATERIAL? Any helpful answer would be appreciated. Thank you, Gabriel.
-
SQL Server 2012 unable to update cumulative update for sql server 2012
Here is the version Microsoft SQL server 2012 11.02.2100.60X64 Trying to install the update to install sccm2012 Error There are no SQL server instance or shared feature that can be update on this computer.
-
Flash Nightmares on Safari. . .Help!
This all started rather simple. . . I visit a site of a client of mine that has a flash video that was not working on my Safari but did work on Firefox. I also had a SIMBL error come up every time I opened Safari which started I'm guessing either whe
-
Hi, i have loaded my kernel module through modload cmd in Solaris 10, but when i m rebooting my machine then module is automatically unloaded from kernel , how i can solve this problem.
-
Is there a download that will allow Adobe Acrobat 6 to run on Windows 7 32 bit machines