Hey, I just installed ML on my OCZ Octane SSD, everything went ok, However, it got stuck while rebooting and now I can only see flashing question mark icon and ML won't boot at all. Only in safe mode...
Hey, I just installed ML on my OCZ Octane SSD, everything went ok, However, it got stuck while rebooting and now I can only see flashing question mark icon and ML won't boot at all. Only in safe mode...
It looks like ocz is aware of the issue and trying to address it via firmware:
http://www.ocztechnologyforum.com/forum/showthread.php?103700-Mountain-Lion-and- OCZ-Octane-Petrol-and-Octane-S2-SSD-s
It's a shame because apple is clearly the party that changed something.
Similar Messages
-
I did the update today and now itunes can't see my ipod, uninstalled iTunes and all the recommended things, nothing has worked.
It worked just fine last weekend. I have windows 8.1 and a brand new pc, new iPod also, the new Nano. now after the update today, iTunes says iPod has been detected but could not be indentified properly. I can see it in windows. I tried the reset on the iPod also. what else can I do?? HELPuninstalled iTunes and all the recommended things
Doublechecking. Have you tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8 -
I have been using my Apple ID in India and recently i moved to Spain and now i can not see my indian apps.it says my apple ID is valid for only spanish store.how to download apps from Indian store being in Spain.
Did you try to change the location in Settings/iTunes & AppStore/AppleID -> view Apple ID, log in ->Country/Region -> India?
-
Mac Pro won't boot up, not even in safe mode.
Problem: Mac Pro having severe lag issues. Added more ram, removed Kona3, etc., nothing. Tried repairing with disc warrior but unable to repair startup disc unless booted from disc warrior disc. Won't boot up from disc warrior disc so set startup disc to the disc warrior disc. Now comp won't boot up, not even from safe mode. Any suggestions?
Boot from your OS X install DVD.
You always need to have a 2nd backup you can boot from, or an emergency (only) boot drive.
Disk Warrior does not have 10.5.2+.
If you can't do anything, zap pram, see if that helps. Or pull your drives and boot from your DVD. Setup OS X on a FW drive.
And of course, always always have at least two backup sets of your system; and sets of your data - so one set at least is always off line.
http://www.geocities.com/texas_macman/pram.html
http://docs.info.apple.com/article.html?artnum=2238
http://www.apple.com/support/macpro/
http://www.thexlab.com/faqs/datacorruption.html
Issues with OS X and with Installing
http://support.apple.com/kb/TS1541
http://support.apple.com/kb/TS1388 -
Imac wont boot only shows flashing question mark folder (long)
Imac 21.5 late 2009 with no upgrades.
Had previously turned on bootcamp inadvertently without installing Windows OS. On shutdown accidently picked start Windown on next startup and since has only shown flashing question mark.
Tried to boot to single user mode, safe mode or verbose mode without success.
Could not find orginal OS disk that came with computer so used OS disk from a 13' Macbook pro (mid 2009). Would boot to OS installer but got error when it tried to install. Was able to get past this and use Disk Utility and did repair permisions and repair disk without change in result.
Tried rest PRAM and NVRAM without success.
Then found that the OS disk from the Macbook was a different build and finally found OSX installation disk that came with computer and will boot to MAC OSX installer. Did repair disk permision and repair disk without change.
Reloaded OSX without change.
With disk in will boot to single user or verbose mode but I dont know enough to know what to fix from there. I am assuming somehow boot files have become corrupt.
Any help? ThanksI didn't read your complete post however by the subject line alone it appears your computer cannot locate it's startup volume per: http://support.apple.com/kb/TS1440
The easiest way to remedy that is to restart while holding down the C key on your keyboard. After the computer has restarted then go to System Preferences - Startup Disk and choose the internal HD and then click restart to test.
Roger -
I have just upgrade Itunes (10.6.3.25) and now I can not see my Ipad anymore. before the upgrade it was working fine. I already tried all suggestions from the support page, except re-installing Itunes. any suggestions?
SinluFrank wrote:
already tried all suggestions from the support page, except re-installing Itunes. any suggestions?
Yes. Reinstall iTunes. If that is the point at which you stopped trying the support suggestions then it makes sense to me, that you move on to the next suggestion and if reinstalling iTunes is the next suggestion, so be it.
However .... I too have issues that arise out of the blue with my iPad being recognized in iTunes and what I always do and it eventually works is to quit iTunes, restart my MacBook, and reboot my iPad.
Rebooting the iPad is the last thing that I do and only if I have no success with quitting iTunes and restarting the Mac. It may take a few tries to work, but if you are that dead set against reinstalling iTunes, then give it a try. -
I have a new air iPad, just downloaded a new movie and now I can't play it as it his and all my other movies have a cloud icon, how do I get to play it on the iPad
Tamate46 wrote:
now I can't play it as it his
Not sure what you mean by this. Why can't you play it? -
Mac Mini doesn't work:appair only a flashing question mark on the screen
I try to startup the Mac Mini but the only think that appair on the screen is a white page with in the middle a folder with a flashing question mark.
The Operative Sistem doesn't work:i wanted to try to inser into the CD of OS X and reinstall all but there is just a CD into the Mac but again with botton or with muose clicked ,the CD doens't go out.
Please Mac's users help me.
Bye. Alskarez
Mac Mini Mac OS X (10.4)The flashing question mark means that the mini is not able to find a copy of MacOS to boot from, which is likely why you inserted the OS X disc.
If the disc that is stuck in the system is the original MacOS install disc that came with the mini, you should be able to boot to it by holding the C key down as the system is starting up. Some non-Apple or wireless keyboards don't allow starttup modifier keys to be used, but if yours is an Apple keyboard it certainly should. If it IS the original install disc in the system and the C key doesn't work, and you're left with the flashing question mark, it sounds like you may have a significant hardware fault which may have caused the mini to fail to see either optical or hard drives.
It may be that in that situation a PMU reset (for PPC minis) or an SMC reset (for Intel models) might restore operability, but if not, then you'll likely need the assistance of an Apple approved service provider.
To reset the PMU in a G4 mini:
- Unplug all cables from the computer, including the power cord.
- Wait 10 seconds.
- Plug in the power cord while simultaneously pressing and holding the power button on the back of the computer.
- Let go of the power button.
- Press the power button once more to start up your Mac mini.
To reset the SMC on an Intel mini:
-From the Apple menu, choose Shut Down (or if the computer is not responding, hold the power button until it turns off).
-Unplug all cables from the computer, including the power cord and any display cables.
-Wait at least 15 seconds.
-Plug the power cord back in, making sure the power button is not being pressed at the time.
-Then reconnect your keyboard and mouse to the computer.
-Press the power button on the back to start up your computer. -
hello, I have chnaged my computer 2 weeks ago and now I can't see my videos. I'm able to see only my CDs. Who can help me? Thanks in advance.
No I didn't. I have just synchronized my computer with itunes and that's all. I also click to "allow this computer to use itunes''. How can I put my videos on the new computer? Franckly speaking I just use itunes for downloading and I don't know how to set up the options and so on.
-
Please, I need help. I´ve just downloaded your adobe creative cloud and now I CAN´T SEE THE DESKK ON MY PC!!!!!
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html -
I installed Prokit 7 upgrade today and now I can't see any of my type 1 fonts when in Indesign or Photoshop. Not sure if the upgrade did it, but it seemed to coincide with the problem. I am a graphic artist spend all day everyday using these programs, hardly ever have a font problem. Anyone have a similar problem?
I reinstalled Prokit 7 upgrade and it did not fix the problem.
I put my fonts in user/library/fonts, where I have always put them and when I am in any Creative suite app. the only fonts visible in the font list are open type and TT fonts. No type 1 fonts appear in the list even though I have them in the fonts folder. They do not appear in fontbook either. -
i downloaded newest itunes version and it would not install properly and now i can't open itunes. i have removed and reinstalled several times. i get error 7 (windows error 126) something about apple mobile device failed to start. what can i do to fix this problem besides restoring system to an earlier date
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I have the flashing question mark, but when I press option/alt, I'm only prompted to start the internet recovery. Afterwards the Mac OS X Utilities pops up, but there's no start up disc when I try to reinstall Mac OS x or anything.
Hello, sullivja.
Thank you for visiting Apple Support Communities.
Here is an article I would recommend going through when experiencing this issue.
A flashing question mark appears when you start your Mac
http://support.apple.com/kb/ts1440
Cheers,
Jason H. -
Cant' open Firefox at all, not in safe mode either, tried creating new profile, cant' get in to do that, tried uninstalling and reinstalling, switching off and on, nothing works. Get error: "The instruction at "0x00000000" referenced memory at "0x00000000". The memory could not be read."
== This happened ==
Every time Firefox opened
== today. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0)The solution is easy.
Install "Malwarebytes' Anti-Malware" free edition and use it. This program found malware in your pc. After that clean this malware. Finally instal Firefox again and enyoy it because this installation is correct and clean. Regards. -
Following an automatic update, the machine wouldn't boot. Screen came on (shows white) - then either showed a 'No-Entry' Sign and a spinning cog, or a folder with a qusetion mark. I tried to start the machine in different modes ( eg. holding shift after the tone ) but nothing worked. after leaving the machine alone for 1 hour. It worked perfectly again. I did a 'verify disk' check which found no problems. 2 hours later it then froze ( In - Photoshop). Could not force quit, so shut down, and have not been able to boot again since (white lit screen - flashing folder with question mark) . I have also taken the hard drive out and checked the connections which seem fine. Any suggestions? - Is the Hard Drive dead. : other info : It was also running parallels 8, with Windows 7. at the time of the update....
This article may help: A flashing question mark appears when you start your Mac.
Maybe you are looking for
-
Scanning legal size on Pro 8610 printer
I have tried everything and can not scan legal size on this printer. It does not have a setting gear icon after you push print like it does when you push print. If you use the feeder on top it does not automatically detect the size, it always scans l
-
Tomcat finalizer memory leak ???
I have was profiling my application using yourkit profiler. The statisxtics are stange and I need help to understand them. Here is the scenario: 1) started Tomcat @ 1:00 profiling using yourkit profiler - only 1 context, our application. I set the pr
-
How to ping mysql database in JSP
Hi guys, I am working on a JSP based application that sends data over to a remote mysql databse over port 5656 . I am intrested in writing a code sequence in JSP that will first check whether the remote mysql databse is working or not. If not, Then t
-
How to persist a data in request scope
Hi All... I am using JDeveloper Studio Edition Version 11.1.1.0.2.In my managed bean (backing bean scope), I have a variable say " private loginname;" with a global scope and corresponding getter and setter methods inside the backing bean.How can I p
-
I have an 80gig classic and playback of mp3's are usually very quiet compared to other ipods (previous gen 30gig) and the volume levels are all over the place. I have normalized all my files and I have no problems with itunes playback, also the volum