Hey! i wonder what steps are need to set up an iphone or an ipad as an Airport Express device, so it uses its wifi capabilites to capture a music stream, being conected to a pair of speakers in my living, or in my bedroom ?

I know that i can receive in my iphone the streamed music of the itunes library but this happends as an indepent music stream from the one already  playing in the computer
I would like those to be in sync:
so i ca n set my whole house under one music stream, with my 2 iphones4, my ipad, and  1 airport express. plus the local pc in my offifce,
The airport express is hooked at the livingroom with a 4.1 set tha rocks.
my local pc is hooked to a Sony 5.2
then mi iphones could be at the master room and the other in the kitchen.
while managing the 4 individual streams with independent volume levers.
justa as if they where all airpor express devices
Is understood that the iphone 4 obviously exceeds the technological requirements to achieve such a task. !

you should be able to do what you want using Airfoil.

Similar Messages

  • HT1386 Switching from a pc to a Mac. What steps are needed to get my iPhone and iPad to work with my new Mac?

    What steps are needed when upgrading from a pc to a Mac?

    Copy everything from your old computer to your new one.

  • I need to set up 9 IPhones and 4 IPads to be used as data collection devices. How can I do that without setting up 13 separate ITunes accounts?

    I need to set up 9 IPhones and 4 IPads to be used as data collection devices. How can I do that without setting up 13 separate ITunes accounts?

    You can use the same account to set up as many devices as you like.
    You might also find there are tools to help with a roll out.
    http://www.apple.com/support/iphone/enterprise/
    tt2

  • What steps are needed to trigger a W-2C?

    I need to create a scenario in our test environment that will generate a W-2 C for an employee. What steps / actions do I need to take in SAP. I know I need a payroll adjustment or a YE adjustment. Can someone please outline this for me.
    Thanks,

    Hello Carla,
    First the filing data of the orginal W-2 needs to be set. W-2C are then generated when there is a change in the information on the W-2 that was filed with the IRS. These changes include wages, tax amounts, Soical Security number changes and name changes.
    Please refer to the "W-2 Post-Filing Run User Guide " which I have attached and can be found on SAP Service Marketplace at service.sap.com/hrusa
    Regards,
    Manny

  • What steps are needed to configure the apps tier after a db-only clone?

    Hello Gurus.
    My client wants to save time on cloning, and has asked for database only refresh - meaning that we dont clone to the application tier, but only to the database.
    What steps must be taken once the db clone has completed? Need I run autoconfig? What about all the profiles that will be pointing to LIVE in the database?
    Thanks.
    DA

    hi Dan
    this is covered in the Rapid Clone documents -- Refreshing a Target System
    Note: 230672.1 - Cloning Oracle Applications Release 11i with Rapid Clone
    Note: 406982.1 - Cloning Oracle Applications Release 12 with Rapid Clone
    you should run adautocfg.sh on the application tier as well. Otherwise the essential information regarding your application tier will not be registered within the database and you will not be able to connect to your database through the application.
    adcfgclone will not be necessary on the application tier.
    Yes, you need to run AutoConfig to populate FND_NODES with the application nodes information. You may also need to clear the FND_NODES table as described in the following note:
    Note: 260887.1 - Steps to Clean Nonexistent Nodes or IP Addresses from FND_NODES
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=260887.1
    source;- https://forums.oracle.com/thread/652681
    AppsMasti
    Sharing is Caring

  • What steps are needed to download an older version of Firefox for testing an Oracle certified version?

    I want to download an older version of Firefox for testing Oracle certified versions (for PeopleSoft PeopleTools). I found the directory of older versions but need instructions for the steps needed to download the desired version, which is version 17. Thank you for your help.

    The latest Firefox 17 ESR ''(Extended Support Release)''' for Windows is available here: <br />
    http://ftp.mozilla.org/pub/mozilla.org/firefox/releases/17.0.6esr/win32/en-US/
    If you will be installing that version on a PC which already has a different version of Firefox installed, you will need to create a new Profile fir the ESR version. Let us know and we'll tell you how to create a new Profile.

  • What steps are needed to untag default vlan to gigabit port on SRW208P

    We have VLAN 1 disabled on our standard Cisco Catalyst switches and use VLAN 11 as our default.  We have recently added VLAN 221 for voice while implementing a new Cisco UC system.  I can't seem to disable VLAN1, however, I have made the default VLAN 11 and Voice VLAN 221.  In VLAN Management, I can untag VLAN 11 (PVID) on all ports but the Gigabit port connecting to the Cisco 6506.  That port always tags VLAN 11 & 221 and untag (PVID) VLAN 1. 
    I have tried making changes to the switch while connected to the switch and when I make the setting, the switch loses connection to the 6506.  If I make the appropriate changes to GI(1) while connected to GI(2), that change takes effect, however, when I move the patch cable to GI(1), the port configuration changes and VLAN 11 becomes tagged and VLAN1 becomes untagged. 
    What is needed to stop this from happening? 

    Hi, I do not support the UC500 model so I can only give information to the switch. The older ESW, SX300 and SX500 series were designed to plug and play to the UC300/500 series for basically zero configuration.
    To my knowledge (which I can be very wrong!!!!!) The UC500 uses vlan 1 data, vlan 100 by default and it usually doesn't deviate this.
    You may disable the smart port and auto voice vlan features, yes. However, this means you need to manually configure your ports or use the telephony OUI features.
    I can outline how to disable the smart port and avoid using auto voice vlan, however, it would be most prudent for you to call the UC500 support to 100% ensure there is not a better way to manage via way of the UC platform.
    If you could please call the SBSC and verify there is nothing better to be done then I would be happy to further assist
    http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
    -Tom

  • What steps are needed to put a song on Itunes

    Can someone tell me the steps to do inorder to put a song on iTunes. Is it possible if you arent with a record company or if its copyrighted

    Take a look here:
    http://www.apple.com/itunes/content-providers/music-faq.html
    You will need to own or have licensed the copyright to any song and recording that you wish to sell.
    Regards.

  • What steps are required to configure the Payroll Tax ( USA)?

    Hi All,
    Please answer
    What steps are required to configure the Payroll Tax ( USA)?.
    Thanks in Advance
    Thank you,
    GKReddy.K

    hi Dan
    this is covered in the Rapid Clone documents -- Refreshing a Target System
    Note: 230672.1 - Cloning Oracle Applications Release 11i with Rapid Clone
    Note: 406982.1 - Cloning Oracle Applications Release 12 with Rapid Clone
    you should run adautocfg.sh on the application tier as well. Otherwise the essential information regarding your application tier will not be registered within the database and you will not be able to connect to your database through the application.
    adcfgclone will not be necessary on the application tier.
    Yes, you need to run AutoConfig to populate FND_NODES with the application nodes information. You may also need to clear the FND_NODES table as described in the following note:
    Note: 260887.1 - Steps to Clean Nonexistent Nodes or IP Addresses from FND_NODES
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=260887.1
    source;- https://forums.oracle.com/thread/652681
    AppsMasti
    Sharing is Caring

  • How do I determine what xtras are needed?

    From the searching I have done it appears that xtras equired are mostly trial-and-error.
    Is there an efficient way to determine what xtras are needed for each lindividual movie?
    My programs are divided into a series of sequential movies.  At the end of each movie
    there is a goto statement to launch the next movie.  Does that require me to determine
    xtras for each separate movie? 
    In a perfect world there would be a way for Director to search a  folder for and present an aggregate list of all xtras required for that set of movies.
    If no such method exists, what is the recommended hunt and peck system?

    Thanks for the response, rduane.  But I refer to the procedures as a bit random for the reasons you mentioned in your explanation.  For example, you stated that, "Director will normally add all of the Xtras that you need to each movie as you build it".  And, yes, I know that it does add some automatically.  But, if Director really does "add all of the xtras that you need to each movie as it is built", how could I ever jump to one that is missing a needed xtra?  If it needs it, why wasn't it added when it was built?
    So, that's the reason I mentioned "trial and error", and "hunt and peck".  The system is not reliable in its handling of xtras, or which ones are needed where.  I am familiar with workarounds such as going to each movie and selecting Modify>Movies>Xtras to see which ones Director has added,  But that is all it tells you.  It does not tell you if it has added all the xtras "needed".  And when the error message comes up, it does name the missing xtra, but not which movie needs it.  So, one has to go find the named xtra and copy it over to the Xtras folder. 
    At least, that's what I do to fix it.  But I asked the question because I wanted to know if Xtras handling itself is unreliable, or if I'm doing something incorrectly.
    Dewey-+

  • What wires are needed to connect to a projector

    What wires are needed to connect a macbook to a projector

    A VGA or HDMI cable (Perferably HDMI). But you need mini-displayport connectors to the specific cables.

  • I have a full Creative Cloud Subscription, but I only use Photoshop and Bridge. I want to change to a less expensive subscription but it is not clear what steps I need to do to make this happen. Do you have a simple step by step guide? Seems that there is

    I have a full Creative Cloud Subscription, but I only use Photoshop and Bridge. I want to change to a less expensive subscription but it is not clear what steps I need to do to make this happen. Do you have a simple step by step guide? Seems that there is lots of help to upgrade but not down grade.

    FIRST check with Adobe to find out if you may cancel what you have without a fee
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"
    Then cancel what you have
    -cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
    -or http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
    And finally buy a new subscription
    Cloud Plans https://creative.adobe.com/plans
    -Special Photography Plan includes Photoshop & Lightroom & Bridge & Mobile Lightroom
    -Special Photography Plan includes 2Gig of Cloud storage (not the 20Gig of the full plan)

  • What steps i need to follow to create new P6 8.1 envionment from existing production setup?

    Hi Team,
    We had existing running P6 8.1 Production environment.
    We wanted to create new P6 8.1 DEV environment just same as our production.
    May i know what is easiest way to create new environment as same as to existing production setup.
    What steps i need to follow for creating new environemnt?
    Thanks in advance

    What you need to :
    Create the App server as the same prod -- WLS as example,
    Create the p6 domain in WL;
    Install the P6 r81 software;
    Clone the Prod's P6 db to the Dev;
    Dbconfigure the cloned P6db
    Deploy the P6 8.1 ear file which should be the same as the prod's;
    Reconcile the P6 81 patches with Prod's.

  • While doing ODI migration what things are needed to be setup in Topology?

    While doing ODI migration what things are needed to be setup in Topology manager ?
    1.Like in Toplogy in file we hive file paths.
    2. In Planning we set Logical schema .
    Not sure about other things.
    Hoping some can can help!!!!!!!!!!!!!!!11

    Lots of things are defined in the topology manager - below is a simplified list
    1) Physiccal Schemas the actual connection information / details related to any technology you plan to use in your ODI integration interfaces
    2) Logical schema, abstracted version of the Physical schema which allows greater flexibility ad reuse across environments
    3) Contexts - how you asssociate logical and physical schemas
    4) Agents - manage the execution of ODI jobs
    When you talk about migration, do you mean moving ODI objects between seperate environments such as Dev and Prod? If so you will need to ensure that all the technologies you use in Dev are present in Prod. The physical layer has been set up with all the correct connection details. Your logical scemas has been set up matching your configuration in the dev environment and you have used the contexts to associate the logical and physical layers as per your dev configuration.

  • WHAT PARTS ARE NEEDED TO SHOW MY MAC 10.8.4 OVER TV-.

    WHAT PARTS ARE NEEDED TO SHOW MY MAC 10.8.4 OVER TV….

    About AirPlay Mirroring in OS X Mountain Lion
    You need:
    An AirPlay-enabled device such as http://store.apple.com/us/ipod/ipod-accessories/apple-tv
    A suitable TV monitor
    A network
    HDMI cable
    A compatible Mac:
    iMac (Mid 2011 or newer)
    Mac mini (Mid 2011 or newer)
    MacBook Air (Mid 2011 or newer)
    MacBook Pro (Early 2011 or newer)
    Or, depending on the model Mac you intend to use: a Thunderbolt or MiniDP or DVI to HDMI adapter for a wired connection to your TV or AVR

Maybe you are looking for

  • OOPs ALV report Fieldcatalog Editing a currency field

    Hi all, I have created an OOP's ALV report. I have made one of the currency field editable. when I am changing the value in any cell and go out of the cell(or move to other cell using arrow keys or click some were in the grid) it is taking '.' after

  • How do I add a contact without syncing?

    I have many more contacts on my Mac than I would like on my phone. I just got a new friend's phone number, and I would like to add the information without having to call or text the number first.

  • How can I get bookmarks to open directly underneath the folder in the sidebar to save width space?

    Just reset Firefox(latest version) as it was running slowly, now much better but I had customized the bookmarks sidebar so that everything (folders, bookmarks) opened directly underneath each other rather than one step to the right. This saved space.

  • Junk characters in java

    Hi, How to block the junk characters in java when csv file uploading. Thanks

  • How register the ECC to SLD

    Hi All, I know the we could use RZ70 to register the ABAP system to SLD but it seems RZ70 only could register it as the technical system in SLD but i am wondering is it possible to register the client as the business system in SLD? let's say: ECC hos