Hey, it could be that I'm in the wrong place, but I have a question.

Hey, it could be that I'm in the wrong place, but I have a question.
So we are a gaming community, and we have the privilege of setting up tournaments in (exm) StarConflict.
My question is , where looking for sponsers. I'm not asking mutch (like laptops or what ever) i'm just asking for like steam gift's to or members.
And steam Gift's that we can give away as a price in or tournament... (or any way that we cud get sponserd)
If I'm at the wrong place for this cud you redirect me to the right place?
Thank you for your time, GrZ .

I believe this is a question you need to ask MSI support...mailto:[email protected] They should be able to provide you with the information your looking for, or at least provide you with the direction of where to go. You could also contact some of the other MSI sponsored teams, and look to join them, or ask them how they became sponsored...

Similar Messages

  • I am trying to configure my SCXI-1540 card for excitation voltage and frequency using MAX - but it is not giving me that option when I click on the card and then properties​, am I looking in the wrong place?

    I am trying to configure my SCXI-1540 w/1315 card for excitation voltage and frequency using MAX - but it is not giving me that option when I click on the card and then properties, am I looking in the wrong place?
    I have LabVIEW Express 7.0 Professional - SCXI-1000 Chassiss - along with SCXI-1112, and SCXI 1520/1314 - cable to the PCI-6052E is attached to the 1520 card.
    MAX says it recognizes all the cards in the chassiss.

    Jeremy, Thanks for the reply.
    I tried to set up the system as DAQmx.
    I had MAX auto-detect the set-up - and it recognized all the cards - but did not select the 1315 accessory on the 1540 card - I had to do that manually - but in the configuration section I would select the accessory and it would deselect itself. I had to get out of the set-up and then right click on the 1540 card and click on the "Accessories" tab and select the 1315 terminal block that way.
    It didn't seem right that the system should behave that way, but I pressed onward.
    I then tried to create a new DAQmx Task
    When I create new DAQmx task and then click on Analog Input no "Position" Tab appears for me to select, all I get are:
    Analog>>Voltage
    Analog>>Temperature
    Ana
    log>>Strain
    Analog>>Current
    Analog>>Resistance
    Analog>>Frequency
    Analog>>Custom Voltage with Excitation
    Do you think there might be something wrong with either my hardware or perhaps my configuration that is not allowing it to recognize the 1540/1315 in DAQmx?
    I had included the system report of what programs I am using, etc. as attached file nireport.txt
    After the DAQmx did not work I tried installing everything as Traditional DAQ and it did let me set-up the 1540 Card with Excitation Voltage and Frequency and gain - I then went in to the VI that I had built and tried to use the Express DAQ Assisant to read the channel that I am connected to on the 1315/1540 - when I try to use DAQ Assistant it gives me an error saying that "Device not available in NI-DAQmx. It is possible that the device is being use by traditional NI-DAQ"
    Which I guess it is since both configurations are now set-up in MAX.
    I would PREFER to use the DAQmx set-up, but I am confused as to WHY it won
    't come up with
    Analog input>>POSITION>>LVDT
    When I try to create a new DAQmx task.
    Thanks for the help so far! As you can probably tell I am new at this.
    Ryan
    Attachments:
    nireport.txt ‏2 KB

  • HT1206 I have an old apple id that has a number of songs on it that i want to transfer to my new apple id. it keeps asking me to authorize the old id but i have no password and the email is no longer.  thanks

    I have an old apple id that has a number of songs on it that i want to transfer to my new apple id. it keeps asking me to authorize the old id but i have no password and the email is no longer.  thanks

    All content from iTunes is tied to the account that bought/downloaded it, and it can't currently be transferred to a different account. If you don't know the account's password nor it's security questions (http://iforgot.apple.com), then you could try contacting iTunes support and see if they can help you get access to it : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • DPS: pinch and zoom function not working on all pages within folio (v30 tools using the pdf setting). What would cause some pages to pinch and zoom fluidly, while other pages appear a bit sticky? Could it be a button on the wrong layer?

    What would cause some pages in the same folio to pinch and zoom fluidly, while other pages appear a bit sticky? Could it be a button on the wrong layer that's not allowing the pinch and zoom to work?
    I do have a "go to state" button that enlarges graphic to full page on the page. Could this be cancelling the pinch and zoom functionality? Would a box with text wrap ON affect the ability to pich and zoom? What else may be causing this?

    What would cause some pages in the same folio to pinch and zoom fluidly, while other pages appear a bit sticky? Could it be a button on the wrong layer that's not allowing the pinch and zoom to work?
    I do have a "go to state" button that enlarges graphic to full page on the page. Could this be cancelling the pinch and zoom functionality? Would a box with text wrap ON affect the ability to pich and zoom? What else may be causing this?

  • TS1424 I downloaded a song that I purchased from the ITunes store, but the song does not play properly.  How can I re-download the same song without having to purchase it a second time?

    I downloaded a song that I purchased from the ITunes store, but the song does not play properly.  How can I re-download the same song without having to purchase it a second time?

    I could not find an option to "report a problem".
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the item that is not playing properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
    (Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

  • Hi ya'll! I'm still learning how to navigate my way with Lightroom. (Last time I wrote, I did get some responses that work. Thanks so much!) Now, I have another question. When I try to copy pics from my external drive to a CD/DVD, no matter if do it from

    Hi ya'll! I'm still learning how to navigate my way with Lightroom. (Last time I wrote, I did get some responses that work. Thanks so much!) Now, I have another question. When I try to copy pics from my external drive to a CD/DVD, no matter if do it from LR or my drive, I keep getting the message; "Disk burning is not supported by LR on this computer." I've tried everything I can think of, so, I thought I'd see if anyone may know if there's anything I can do. Or could it be that my computer just can't handle it? Help!!! So frustrating!!  I have a PC Lenovo computer, I don't know if this makes any difference. Any ideas? Thanks so much for your help!!!

    Have you burned Discs with other programs using this computer? Are you certain that you have a drive that will burn discs?

  • I have some old pagemaker files that I need to open so I have bought a G3 on ebay. It turns on OK but all that comes uo on the screen is an envelope with alternating question mark and apple logo. Any ideas?

    I have some old pagemaker files that I need to open so I have bought a G3 on ebay. It turns on OK but all that comes uo on the screen is an envelope with alternating question mark and apple logo. Any ideas?

    I suggest you get 9.2.  You need to install the same or later version of the OS.  One some computer the shipped version has extra drivers.  The drivers will not be in the official release in this case 9.1.  They would be in 9.2.
    Mac OS 9.1 (Mac OS ROM 7.5.1) and Mac OS X 10.0.4 (4P13)
    *blinking question mark*
    The blinking question mark means that your mac firmware could not find a valid operating system
    on one of your disk volumes.
    Somethings to do to resolve the blinking question mark.
    http://docs.info.apple.com/article.html?artnum=58042
    Try holding down the option key then power on.  This brings up the startup manager.  Click on your hd. Click on right arrow key.
    You need to figure out the level of your firmware before installing 10.2 or greater. ( The PC name for firmware is BIOS. ) Installing 10.2 with a down level firmware will most likely make your iMac unusable and difficult to fix.
    What is firmware?
    The firmware software receives control when you poweron your machine.  It does some hardware testing and some hardware configuration then passes control to your version of Mac OS.   It reside on a PROM ( program read only memory ) chip on the logic board.
    Figuring out what level of firmware you have?
    Open Firmware, boot into Open Firmware.
    Power on your iMac while holding down command+option+o+f
    The first output line contains the firmware level. Mine reads:
    Apple PowerMac4,1 4.1.9f1 BootRom built on 09/14/01 at 13.18.04
    Copyright 1994-2001 Apple Computer Inc.
    On my machine, I have 4.1.9f1.
    What firmware do you need?
    http://docs.info.apple.com/article.html?artnum=86117
    For a slot loading iMac, this article indicates that you need to be running 9.1 or later version of Mac OS Classic.
    http://docs.info.apple.com/article.html?artnum=75130
    "The iMac Firmware Update 4.1.9 will only run on iMac computers with lot-loading CD or DVD drives running Mac OS 9.1 or later from a local drive. If you are using Mac OS X you must boot from a local Mac OS 9.1 or later writeable partition (not a CD, or network disk) prior to following the update instructions."
    You can download the Mac OS 9 updates from the Apple site.
    http://support.apple.com/kb/HT1387?viewlocale=en_US

  • Hey I don't know if I'm in the right place but i would just like to give apple an idea for there next big upgrade. I would like to sugest  "Liger" as a new operating software :)

    Hey I don't know if I'm in the right place but i would just like to give apple an idea for there next big upgrade. I would like to sugest  "Liger" as a new operating software>

    Well, I think they've boxed themselves in so that the next revision will have to be called Aslan.  (ok, maybe that joke's too subtle, so I'll link it)

  • Not all of my perviously purchaced songs are showing up on itunes purchaced link on my account. It show that I have already purchaced them in the itune store, but i have no way of downloading them back into my library.

    Not all of my perviously purchaced songs are showing up on itunes purchaced link on my account. It show that I have already purchaced them in the itune store, but i have no way of downloading them back into my library.

    If they aren't showing in the Purchased tab in the iTunes store app (and the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage on your computer's iTunes) for redownloading then have you checked to see if they are hidden : http://support.apple.com/kb/HT4919 ?

  • HT201415 I want to purchase a month of cellular service for my IPAD2.  When I use my ITunes password,  it states that I have the wrong password but does not offer a way to reset my password.  Please advise.

    I want to purchase a month of cellular service for my IPAD2.  When I use my ITunes password,  it states that I have the wrong password but does not offer a way to reset my password.  Please advise.

    Read through this link and maybe you'll see something that will help you:
    http://www.tech-recipes.com/rx/5827/ipad-3g-activating-purchasing-att-cellular-d ata-for-the-ipad-3gwifi/

  • My parent's IPad is SUPER outdated and I'm trying to buy an app for my brother for Christmas. However, the computer that was connected to the IPAD, we no longer have. So is there any way I can update it on my mac without erasing all the photos and videos?

    My parent's IPad is SUPER outdated and I'm trying to buy an app for my brother for Christmas. However, I can't buy the app because it says we need to update the software. The thing is, the computer that was connected to the IPAD, we no longer have. So is there any way I can update it on my mac without erasing all the photos and videos?

    HELPPP ME BEFORE CHRISTMASS MORNING!!

  • How can I modify an incorrect mailing address on my AppleCare Protection Plan certificate? After I registered a new product with AppleCare I realised that I'd entered the wrong postal address and I need to update it to show my correct address.

    I need to modify an incorrect mailing address on my AppleCare Protection Plan certificate. After I registered a new product with AppleCare I realised that I'd entered the wrong postal address during the registration process and now I need to update my details to show my correct address. I've been trying for several hours to find a way to modify my address on the AppleCare site, with no success. Any help/advice would be greatly appreciated!

    Contacting Apple World Wide for Support and Service
    http://support.apple.com/kb/HE57
    Apple Contact USA
    http://www.apple.com/contact/

  • Is there a way to get back lost information on a phone that was synced to the wrong itunes account

    is there a way to get back lost information on a phone that was synced to the wrong itunes account? My sister and I share a computer and she accidently did the itunes restore on her phone under my name so all of my contacts, apps, ect are on her phone and all of her info is gone. Is there a way to undo the reset? PLEASE HELP!!!

    She can restore to a previous backup, if she has one. Or she
    can restore via iCloud if she has that setup.

  • I upgraded Windows 7 to Windows 8 with iTunes installed. Now my iPhone 4S is no longer recognized in iTunes. Connecting with USB sends me directly to the MS app that downloads pictures from the iPhone. Suggest this is a question of missing Apple driver.

    I upgraded Windows 7 to Windows 8 with iTunes installed. Now my iPhone 4S is no longer recognized in iTunes. Connecting the iPhone with USB sends me directly to the MS app that downloads pictures from the iPhone. Suggest this is a question of missing Apple driver for Windows 8, iTunes and iPhone. MS does not care! This seems to be a general problem with Windows 8 that a number of drivers that used to work with Windows 7 now do not work, ie. iPhone to iTunes, HTC to HTCSync, Samsung to Kies etc. I need this connection to work in order to syncronize with Outlook and my iTunes library.

    diesel vdub wrote:
    Maybe it would have been a better idea to confirm that iTunes is supported in Windows 8 before buying a computer with that Operating System.
    There will be a new version of iTunes released this month... no one forced you to upgrade prior to a supported version of iTunes being released.
    Like the fact that you just called most of us stupid there

  • I have music that is playing within the iTunes program, but not on my iPod. How can I fix this?

    I have music that is playing within the iTunes program, but not on my iPod. How can I fix this?

    Skipping songs
    The iPod seems to fail to play all of the occasional track that iTunes, and indeed other PMPs, are happy to play. There is probably some minor technical error in the internal structure of the file which is normally ignored by other playback software but causes the Classic to bail out.
    If you use Windows you may like to try scanning the files with MP3Validator which can find & fix some internal MP3 errors.
    Some users have also suggested that completely removing all id3 tags and then replacing the information can be a solution. This can be achieved in iTunes by selecting an affected track, right/control clicking and using the option Convert id3 tags> None. Since some files may mistakenly have more than one tag you may need to repeat this action. Once you have confirmed that no tag is present you can replace the tag information using Convert id3 tags > V2.3 (I believe it is recommended to avoid using V2.4).
    Personally I have found files for which these solutions don't work. In this case the workaround is either to re-rip the tracks or get iTunes to re-encode the file, e.g.convert AAC to MP3 or vice versa and sync the newly encoded file to the iPod instead. Because transcoding will cause a loss of fidelity you should keep your original file so that if a future iPod firmware resolves this issue you can put your original files back onto the iPod.
    tt2

Maybe you are looking for